Win Vista updating issues

Problems updating the first time I plugged it into my PC. Everything seemed fine until I checked for updates on applications- had one and started it off and then nothing. It gave me dire warnings not to disconnect the device before update completed but after an hour no progress had been made on the progress bar and I kinda wanted my phone back.. So I pulled it and prayed for the best!
Does anyone else have this problem? What do you do other then Pull&Pray?

I'll answer my on question. No problems, when I was directed to the Apple's site to download iTunes 10.5 I clicked down load and in a couple mintues iTunes icon popped back up and all my music and apps where there.

Similar Messages

  • Vista update issues

    I just installed Vista 64 bit version, well for the second time. I had an issues when I tried to install Parallels ... and they were no help! So I started over and I've re-installed Vista but I'm having trouble with the latest critical updates ... I have 33 updates that will not install because of a 8000ffff error, yet I can't find any solutions.

    There is a solution on this page, which might be worth trying.
    http://ask-leo.com/whatis_error_8000ffff_when_i_try_to_install_a_windows_vistaupdate.html
    iFelix

  • Driver update for Win 7 USB issue on nVidia chipset systems now available

    This patch is needed for the TouchSmart 600 AIO Desktop series if you haven't installed it.
    http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...

    The update is not part of the desktop Win7 update disc from MS or HP  - Microsoft has not yet integrated it into Win7, and it is not yet available on Windows Update (it is likely to hit there sometime in January).   It was available too late to get it out on HP Update before the holiday break.  I don't believe there have been any rolls to the Win7 upgrade disks.   I do recommend (while still on Vista) running HP Update and installing all applicable updates  - PRIOR to doing the Win7 upgrade.  Also - I'd double check the drivers page for your system for any Vista updates as well,  best to do any driver/BIOS/Video BIOS updates prior to the Win7 upgrade process.  I know that some of them were created before Windows 7 was out - and may not want to install if it sees the newer OS.
    As to the fix - this could manifest itself in many ways - but essentially - this resolves system flakyness with USB devices attached .  Some internal devices (card readers, touchscreens, some Wireless LAN interfaces) connect via USB - so they could be affected, even if you haven't hooked up anything to your system externally.
    Not sure just what problems you were experiencing, so can't say this was the cause (and will be the fix) - but if it applies to your system - I'd definitely give it a shot.    I checked a couple of systems that had this update - I see it now on the software drivers and update page for them, so it looks like it rolled out OK.
    Happy Holidays...
    -DM (an HP employee, but the time and comments here are my own, not my employers)
    -DM (HP Retiree)
    NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
    If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

  • After deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

    after deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

    Try downloading it with another browser.
    If that doesn't work, try following along with this Apple article -> iTunes: Downloading iTunes for Windows using Internet Explorer

  • My question is ***, never had any probs before , love my Iphone 4 and Itunes now, I can't run Itunes on my win Vista Prem, and in turn can't update my Iphone!!!So dissapointed!!!!!!

    Never had any probs before , love my Iphone 4 and Itunes, now I can't run Itunes on my win Vista Prem, and in turn can't update my Iphone!!!So dissapointed!!!!!!

    I've the same problem, and this pops up when i'm trying to open itunes..... i tried installing and unistalling like 5 times ... i download the version for windows 32bits, i have w7 32bts, and just keep poping up that sh****
    sorry, but what can i do to upgrade my iphone???!!!!!!

  • HT2292 I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

    I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

    You might find this article helpful: http://support.apple.com/kb/TS3694
    It has the error range of 3000's which states
    Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes. 

  • Windows Vista update error code 80070490

    Hi there,
    Can anyone help me with this issue! I've tried everything under the sun to fix this problem so I'm hoping you's more in the know than myself can help!!??

    Hi
    This Vista update problem seems to be known to Microsoft:
    +If you receive Windows Update error 80070490, it means that a file (CBS Manifest) that's needed to install updates is corrupt. To correct this problem, you'll need to repair Windows. Repairing Windows won't damage your personal files or the programs that are installed on your computer.+
    Here more details how to fix this issue:
    [Windows Update error 80070490|http://windows.microsoft.com/en-us/windows-vista/windows-update-error-80070490]

  • Cisco VPN Client after Windows Vista Update (KB941229)

    I had the Cisco VPN client 5 installed on my laptop and configured by the IT department at work. It was working fine all day until I restarted and KB941229 was automatically installed. When it turned back on the Cisco VPN service (CVPND) would attempt to run then stop. If I started it manually it would run for about a minute then stop again. Without the service running the VPN client won't open, let alone let me connect.
    I know this vista update is fairly recent so I'm not sure there will be a fix but maybe somebody can think of a workaround or some way to fix this situation.
    Things I've tried:
    1) Uninstalling the windows update
    2) restarting
    3) restarting (in denial that this was happening)
    4) configuring a vista VPN connection to attempt to connect to the company VPN (this failed too)
    Uninstalling the update caused me to be unable to ping for some reason. This meant the VPN client would run but be unable to connect to the server and yet I was entirely able to access the internet locally. I reinstalled the update assuming maybe the installation went badly but that caused the same problem with the VPN service stopping itself (or being stopped) after a minute.

    Hello
    my issue has been resolved.
    there is a service called Base Filtering Services running in background for Vista and has to disabled to make IP Sec VPN Client working.
    after doing so it works smoothly.
    - Dhaval Tandel

  • Satellite L300 - Vista update error 8007007A

    I am using Toshiba L300 laptop with Windows Vista home premium loaded in the system while purchase.
    I found Vista Update through Windows update. I have tried to install it, but while installation i got a error message 8007007A.
    Can anyone help me to fix it?

    Hi
    I found out that the 8007007A error means.
    Its Insufficient Buffer issue.
    Someone suggested that the windows update is probably set to "automatic".
    There are probably too many updates or a large one like a service pack.
    If you dont have a SP1 installed then you could download it manually and then could try to install it.
    Then try to install further Vista updates!
    Good luck

  • Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro.

    Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro.I can logon to  iTunes from the laptop but can't download my previous purchases thru the wifi.

    Miketroach wrote:
    Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro
    Yes.
    The following article(s) may help you.
    Troubleshooting Home Sharing
    Security Software Issues
    Troubleshooting Wi-Fi networks and connections
    Recommended Wi-Fi settings
    Wifi Diagnostic Software (for Mac users)
    You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
    When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

  • Satellite Pro A200: Vista update messup my wirleless adapter

    Help
    I updated vista business on a Satellite A200 to the latest patch and everything was running well until this point.
    Now my intel(R) PRO/Wireless 3945ABG network driver does not work. It has the "!" in device manager.
    I have downloaded and install the latest driver from intel, deleted and reistalled the drivers and each time vista says the correct driver in installed but still the "!".
    Thank you for any suggestions to fix the wireless adapter

    i have exactly your problem - i've tried various drivers for the wireless from intel but to no avail!
    I system restored and updated windows one at a time and found that '*update win Vista (KB943899)*' always fails; also, on 14/2/2008 an *intel update for the pro/wireless 3945abg nc failed*.
    Now whenever i start up a found new hardware window opens and declares windows need to install a driver; i say go ahead and it then says ' *window found software but encountered an error trying to install it. The Data is Invalid*' so what else do i do....?
    my device manager recognizes it but has the exclamation mark over it, *and* one over my realtek device which fails to be recognized: both report a status error '*code 31*' - '*window cannot load drivers for device*'.
    Please someone here our plea for help!! ?:|

  • Outlook 2007 /Vista Updates

    On February 24th I did some Vista updates now things are not going so well.
    I am continually getting the following errors and I have read the forums and I have the lastest Palm Desktop software and have the latest Outlook 2007 updates. Therefore I am having problems figuring out what has cause the synching process with these errors. All other Outlook items are synching just not the Calendar.
    Outlook Calendar Sync aborted
    OLERR:03-000F (0x94904005)
    OLERR:0D-000E
    OLERR: OD-0004
    OLERR: OD-0001
    -Recovery Sync
    OLERR: 15-0002
    0LERR: 06-0001

    Some things with Acrobat 8 and Word 2007 don't work (I had niggly issues like this until I updraded Acrobat) -- Not a supported combination. With Office 2007 Acrobat 9 is recommended.

  • Reader 10.1.1 / AcroQTP / Win Vista / QTP10 - objects not recognised

    Hi there,
    I get the same behavior problem with my config:  Reader 10.1.1 / AcroQTP / Win Vista / QTP10
    According the comments found on others posts here, that is supposed to run.
    Vista settings are done to avoid any problems (security on users desabled, everything is made on admin account,...).
    PDF Reader has been reinstalled, and other versions has been tried too ( 9 and 10.1.4).
    Only the latest version of AcroQTP has been used (business restriction for only PDF v10 or higher).
    As other users, I can see the add-in ein my list, the "pdf items" in the tool>object identification but:
    - no way QTP recognises the pdf content items, but only one global object.
    - the test script that is provided with AcroQTP stops because the first item is not found (smart identifiction on and off, same behavior) --> which excludes pdf problems (as it is supposed to be interactive and not locked).
    Any idea what I may have missed?
    Thanks for your help
    KR
    C.

    I unistalled and reinstalled everything. I still get the issue:
    Config:
    QTP 10.0 with Patch HP QTP_00626, on Vista and Browser IE7
    All plugins (AcroPDF, Flex, etc) appear in the QTP active Plugins window.
    Tested versions:
    Reader 10.1.1 (not in compatible list but Adobe recommends it anyway, see "http://forums.adobe.com/message/3956025?tstart=0#3956025") -> No go
    10.1.2 (ideal with the latest AcroPDF plugin) -> no go
    10.1.4 (known issues, see the same link above) -> No go
    remark: I only focus on the second version of the plugin (see "http://labs.adobe.com/downloads/aptt.html"), as the old one is compatible with 9.x versions, which are out of my scope. There is a rumour about an hypothetical third version, but nothing concrete here.
    Problem:
    I always get "Failed to find object: Failed to find Acrobat" when I run the AcroPDF test which is in the tool package. No acrobat installed.
    The user manual says "An unsupported version of Acrobat is being used or both Acrobat and Reader are installed." But my configuration definitely fits with these criterias.
    A record in QTP only sees AVPageView item.
    -> According the AcroPDF documentation, it is supposed to only happen with QTP 9, but it appears with QTP 10 as well...
    Does anyone have a clue how I could fix my issue?

  • Black SOD after Vista Updates on Satellite A205-S5804

    I have a Satellite A205-S5804 laptop running Vista Home Premium. It ran fine until an automatic update (about a month ago). Then I got the Black Screen Of Death during bootup (somewhere after the Vista starts to load but prior to the user logon). Took it to the Geek Squad who says it isn't hardware related (as my extended warranty only covers hardware). They claimed it is a corrupted OS. I think they are correct about it not being hardware since I can get it to go to Safe Mode. Restore didn't work. I acquired a copy of Vista Home Premium and attempted to run repair but that didn't correct the problem. Next I reloaded it. Everything ran great like it is suppposed to. But the automatic update downloaded and installed the 92 or so Vista updates that it supposedly needs since the Vista disk was produced. Now the problem is back. I can get to Safe Mode, into the BIOS and just about everything else except I cannot get it to boot normally without black-screening before the login to user prompt. I have hooked an external monitor up and when the laptop blacks out the external monitor reports no signal. I suspect there is an issue with a Vista update (which one I do not know). I have already backed up the data I want to save and have that on another computer. Any suggestions other than to reload Vista and not ever acquire any updates? Is there a setting in the BIOS or a "fix" to the Vista update? I tried searching for hours on this issue and have not found a solution. Thanks for any help or suggestions from other Toshiba users.

     Restore didn't work. 
    What does that mean?
    It means that when I selected an earlier restore point (prior to when I suspect the Vista update downloaded and installed) the black screen issue remained. At none of my restore points could I get the issue to go away or resolve itself.
    I tried the Toshiba restore to out of the box, or at least I wanted to, however, following the manual instructions the laptop did not give me that option. I held down the 0 (zero) button and powered it on but it did not go into the Hard Drive Recovery mode. I suspect my model is not one of the ones that came with this option.
    So, after taking the laptop to the Geek Squad originally after the problem appeared and verifying that I don't have a hardware problem and also trying the recommended methods for returning to a stable and fully functional computer, I purchased a legit copy of Vista Home Premium so that I could reload the operating system. Yes, I am realizing how much more difficult Vista is than XP. I have reloaded Vista from scratch. I registered the copy. I have downloaded and installed SP1. I am currently doing SP2. I am basically creating a clean machine with just an OS loaded. Once I am sure that it will function properly (no more blacking out) I will reload my programs and transfer my data back.
    Tedious process...but it seems like my best option. And now that it is in progress there really isn't any point in trying anything else other than uninstalling any update(s) after I reach a stable point that may be causing the screen to black out. If and when I reach that point again I will visit Microsoft to see what assistance I can get for any Windows Updates that I can identify as being troublesome.
    I really appreciate everyone's input and suggestions. I was hopeful that it would be something as simple as an outdated driver or something along those lines. However, as much as I have searched, I have not found anyone who has had the exact same problem and there doesn't seem to be an easy cure. I will keep you posted on my success or failure with the method I have chosen. Thanks again.

  • Has anyone called about the 1st Gen Update issue?

    I was just wondering if anyone has actually called Apple about the 3.1.3 Update issue with the 1st gen iTouches. I don't want to waste my time and call when they might just respond with "there's no current solution". My iPod has been bricked on that screen with the "plug in the USB cord" symbol for a few days. Help!

    My wife had the same problem with 1st gen 32gb Touch. She uses a pc based laptop with Vista OS. Couldn't get past the Apple logo even when trying to reset. I plugged into my Mac tonight, and for the heck of it, reset the iPod using the on/off button and home screen button. It now would appear in my iTunes and allowed me to reset. It is starting from scratch again (as she doesn't appreciate my play list), but at least it is fully operational again.
    Have seen where others state they can't restore. May be able to using a Mac. Food for thoughts anyway. Hope this helps.

Maybe you are looking for