Win xp hanging

Hiya,
New poster here...just got new msi nforce-2L delta board...new cpu 2400xp...760ram..80gig wd hd...ati 9600xt....anyway just put all the compnents together on board...formated hd with the software it came with...installed win...everything went fine..when windows was done installing ..it rebooted...at the screen where it says win xp pro...it hangs just sits there ...when reboot can get to safe mode no problem..tryed all of windows trouble shooting ideas..worthless...been looking on here and tried to fix the jumpers on wd hd ..no good...reinstalled win like 3 times..any one have any ideas...i know this is kinda rough i no tech guru to be sure..but some help would be nice )

Ya if i turn comp on it hangs with the winxp pro screen sitting on monitor..so i hit restart and since i did not shut down problery i gives me the "u did not shut down properly" screen..so i then pick safe mode and it "boots" into xp no problem ..in safe mode that is...installed xp like 4 times all fresh installs...new everything...and this keeps happening...windows will load up just great then when it done loading up..it reboots then i get the hole hanging issue ....hope that makes it a bit more clear

Similar Messages

Office 2013 Win 7 hanging

Hi guys, I have a user running Office 2013 on Win 7 32 bit, randomly when opening excel files, excel will say not responding but it will eventually open the files, this can take 5 mins, the only thing I can see in the event log is the software protection
service starting/stopping etc all around the same time, users are very unhappy as its stopping them from working, any ideas.
Thanks

Hi,
Regarding Excel hangs, not responding issue, this could be caused by several things. Please check the below KB for the different scenarios:
Excel: How to Troubleshoot Crashing and Not Responding Issues with Excel
Best regards
Michael Shao
TechNet Community Support

IMac in Win 7 hang over a year now with no solution

I was convince by a friend and bought an iMac 27# in the PC show in March 2010 and along with it.. the additoinal 2Gb RAM and then follow by the Apple Care protection.
It was the biggest IT purchase mistake ever!
As I couldn't manage the Apple mouse accelaration I need to instal Winodws.
I install win 7 using Boot Camp and then install Starcraft 2...
I was horrified by the crash and hang...
- White disorted frozen screens,
- iMac auto restarts..
- Daily.. 5 - 10times.. during the game..
after 2 months I stop using... and start my applecare journey and now reach 1 year..
now iMac sit as white elephant in the house... even apple doesn't really care much about it.
I was then surprised by the applecare..
- They bring you in circle..passing the bucket...
- Customer Relation to Snr tech, to Snr Advisor then back to Customer Relation and restarts.
- 4 out of 11 snr tech doesn't return call and doesn't really log dow case information properly.
- CR consistently **** customer with hardware test processes.. even if you do 11 times..
reformated over 5 times...send in to vendor claim the repair and on the same day less then 15mins.. hang... what's new over the 1 year period..
- 1 CR threaten to hang the phone if I don't redo the entire hardware and then she actually did hang it while I was explaining..
- 4 out of 11 CR remain uncontactable, and doesn't return call evening you leave voice mail.
Now I learn to obtain name of CR and Snr tech including Snr Advisor, anyway they will get away with bad services..as one of the CR mention they will not allow us to speak to thier manager.
It's a long message but coming to the forum seems to be my last restort ... maybe I still hope to see justice for me, on my time and money spent.
from a very disappointted customer.

Thanks for responding...I am currently really fustrated..
It wasn't mean to be personel in anyway which is why I'm not naming the Apple Staffs that are causing me these pain other then the product itself.
Over 11 calls, talk to at least 15 snr tech and not sure how many Support Advisor should be more then 15. maybe 2-4 Snr Advisor..
I wasn't expecting a performance for windows 7. at this stage I only was merely expecting iMac to work as it claims.
Not performing and cannot be use is total different thing..
Create using boot camp... well thank to Apple Care I have already did it 5 times...full reformat..clean install....
update to latest software Mac then Boot camp then install windows 7.. update it then install Starcraft 2.. start game.. and crash and crash and crash....
install Team Fortress 2... crash and crash and crash...
Install left 4 Dead 2... crash and crash and crash..
Clean install with no other software just Windows and the game above.. one by one..shows..
After Servicing from Apple changing the display card, on the day it was delivered back..guess what CRASH!!!!
I have a 3 year old Laptop, that I tested on Win 7 and install the games above reasonable performance but understandable... DOESN'T CRASH at all.... What does that tell you??
Just for curiousity I tested on my friends 2 year desktop PC and wa la..NO CRASH..
This is microsft problems, you say? It's clear.. iMac has issues... maybe that's why noone in AppleCare is willing to look seriously into this to solve this over the past 1 year, I just get push back.. a couple of swiping statement it's microsoft issues.. really you think so?
To curb my attitude, well have you paid AppleCare and have your support advisor hang up on you while you explain?
another one understand the whole thing as she say.. assigns a Snr Tech that doesn't call back???? I call to tha same Support Advisor over 5 times no pick up, left a voice mail .. doesn't return calls..
My assigned Snr Advisor ask me to install Win XP and test...believe a not???? Then pass me back to Support Advisor who then pass me to another Snr tech who claim we should move to the highest level Snr Advisor...
Try doing the circle 11 times.... bare inmind not forgoting the wait time..I waited 28mins for Snr Tech to come on the phone.
That's AppleCare protection.. as it says.. it certainly protects Apple.. but not thier consumers.
I agree iMac is reall nice package and features.. ONLY IF IT WORKS.

Win XP Hangs after Splash Screen (PointSec Loaded)

I have a lenovo t400 laptop, that has Pointsec encryption (6.1.3) ,and WinXP loaded on it.
I ran the Think Vantage Lenovo update tool which downloaded and installed a number of updates - as I hadn't run it for ages.
Now when I try to start the computer it hangs after the XP splash screen is displayed. The screen simply goes black.
I have tried the various Safe Mode options (include VGA Mode, and start with last successful configuration) without luck. They also fail to boot.
The flow is:
Power On, PointSec Authentication Screen, Win XP Splash screen, then a black screen
I have successfully got into the system using UBCD4Win with the pointsec plugin loaded, this loads a WinPE type environment via a USB stick and allows me to access the C: drive unencrypted (as I have authenticated with Pointsec).
I'm really stuck for ideas as to which of the update is causing the problem, and would love to hear some suggestions on how to fix this situation.
Additional Info:
The last few lines in ntbtlog.txt is:
Did not load driver Direct Parallel
Did not load driver SM bios service
Did not load driver SM bus service
Loaded driver \SystemRoot\System32\Drivers\Cdfs.SYS
Looking in:
c:\Windows\$NtServicePackUninstall$
it looks like Service Pack 3 has been installed:
The file: spuninst\spuninst,inf shows:
NtServicePackVersionText = "Service Pack 3"
NtServicePackPreviousVersionText = "Service Pack 2"
Solved!
Go to Solution.

Fixed!!!
The problem was the lenovo updates (most likely culprit being the video driver I presume).
Using UBCD4Win with the pointsec plugin I was able to
* get access to the decrypted c: drive
* Manually rolled back the updates to c:\windows\system32 and c:\windows\system32\drivers
Original files were found in places like: c:\windows\system32\reinstallbackups\008\DriverFiles
* Finally I had to roll back the registry updates that the updates did. UBCD4Win provides a tool to do this: Registry Restore Wizard. It basically just looks in the System Restore Directory c:\System Volume Information and lists all the available Restore Points (thankfully the Lenovo updates mark a restore point before they run). You can also do this manually using the following instructions:
http://hypography.com/forums/tutorials-and-how-tos/17193-xp-recovery-instructions-for-ubcd4win.html
This done the system booted successfully.
I most definitely will be staying clear of pressing the big blue button from now on. That was a real nightmare to fix.

Windows 8.1 Pro upgrade from store on win-8 hangs at "preparing to restart" 98%

Hi,
I tried to upgrade win-8.1 Pro from store and it run more than 12 hrs and does not move after 98% "Preparing to restart".
I tried few times after restart also same.
why
Tks
hari

Hi，
By analyzing the error log, operating system did not have correct privileges to perform the upgrade.
Did your computer join the domain?
If your computer joined the domain,we suggested you to remove the machine from Domain and move it to a workgroup
Did you have multi-bootable partitions? If yes, mark your Windows partition as "Active".
http://windows.microsoft.com/en-us/windows/mark-partition-active#1TC=windows-7
If the issue persists,Run CMD as Administrator, type following command：
Repair-WindowsImage -Online -RestoreHealth
Also, find the following location,and update the ownership of this directory to the Administrators group and granted Administrators Full Control to the directory.
C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys
Hope this helps.
Regards,
Kelvin hsu
TechNet Community Support

11.5.9 with win 2000 hangs during statspack

Dear All,
I started statspack, upon starting of SQL> @spcreate.sql Oracle application hangs and users are unable to work, then i restarted the serviecs, now its working fine but it is happend 2 times on the same point.
spcreate.sql scripts completed successfully.
default tablespace: FERFSTAT
temp tablespace: TEMP
How i can diagnose, basically what was the problem.

Check the following spool files for any reported errors:
- spctab.lis
- spcpkg.lis
- spcusr.lis

Printing from adobe on win xp hangs for 3-8 sec before printing

On networked printers (any of them) Adobe will hang for a short time (perhaps while spooling job) then will continue with printing. While most users dont notice, We have had a few complaints. This happens while printing from the web or from adobe reader.

Problem solved. Does only happen with the Internet Explorer 32bit.
With Internet Explorer 64bit it doesn't happen.
Frederik

Win 7 hangs up on start up T500

I upgraded from vista business to win 7 pro, on my T500. Worked fine untill about 3 wks ago. Win 7 now frequently freezes on start up, sometimes prior to the welcome screen, sometimes at the welcome screen. I have to force a shut down, re-start in safe mode, and go to the last good start. All is fine after that, sometimes for a few days, sometimes til the start up. Any help is greatly appreciated.
Chas1

suggest to to make a clean install or use your recovery dvd for it.
also, if you have windows 7 dvd ( from microsoft ), try to use the fix for startup issue.

Installation of Oracle Developer on Win XP Hangs in Net Configuration

Please ignore my previous post, it caused a problem. I guess I should not have included my log file in the message. :-)
If this the incorrect forum, please tell me the proper forum.
I downloaded and installed Oracle Developer. I installed it into its own home.
I have Oracle 9i Release 2 Enterprise and 10g Express already installed. I am currently only using 10g Express for now. And I have the Oracle Developer Tools for Visual Studio.net 2005 installed.
The installers hung during Oracle Net Services Configuration. Well, hung is the wrong word, it did not go any further. I click Stop to stop the net configuration, and click Ok to stop it. But that doesn't do anything.

Hi
Please control all the pre-requisits in the following documentation
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#i1011417
you can ask more also here.
thanks

Weblogic 5.1 SP8 on WIN NT Hangs

Hi,
I have the following configuration being tested for load.
Weblogic 5.1 SP8, Windows NT, Java 1.2.2, Oracle 8.1.6.
I am running load scripts that access JSP. There are about 15 users doing
fixed number of different things repeatedly i.e. they login, do a few things
and logout. Everything runs fine for about 1 to 2 hours and after that I
observe CPU at 100 % and users cannot do anything. I took the thread dump,
but this does not reveal any user doing any CPU intesive operations. All the
JSP being accessed do finite number of things that take finite time. I do
not see anything that should make the CPU shoot up to 100 %. Do you have any
suggestions on how to debug this problem ? I am enclosing the thread dump
(do you think it is odd that all threads are waiting on signal dispatcher).
Would really appreciate some suggestions.
Thanks,
Mihir
Full thread dump Classic VM (JDK-1.2.2-W, native threads):
"HighPriority TimeEventGenerator" (TID:0x6bd85f8,
sys_thread_t:0x24c7fdc8, state:CW, native ID:0x648) prio=9
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java, Compiled
Code)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java
, Compiled Code)
at java.lang.Thread.run(Thread.java:479)
"ListenThread" (TID:0x632eb98, sys_thread_t:0x24ed8f80, state:R, native
ID:0x94) prio=5
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java, Compiled Code)
at java.net.ServerSocket.implAccept(ServerSocket.java, Compiled Code)
at java.net.ServerSocket.accept(ServerSocket.java, Compiled Code)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java, Compiled Code)
"NBExecuteThread-1" (TID:0x6323590, sys_thread_t:0x2245f660, state:CW,
native ID:0x4b4) prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:424)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"NBExecuteThread-0" (TID:0x6323300, sys_thread_t:0x2245e530, state:CW,
native ID:0x618) prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:424)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-14" (TID:0x6323218, sys_thread_t:0x22448ff0, state:R,
native ID:0x260) prio=5
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-13" (TID:0x63230e0, sys_thread_t:0x22448e80, state:MW,
native ID:0x534) prio=5
at java.lang.reflect.Method.invoke(Native Method)
at com.mycompany.expr.fn.Invoke.eval(Invoke.java, Compiled Code)
at
com.mycompany.jsp.SessionPageBean.performAllActions(SessionPageBean.java,
Compiled Code)
at jsp._myapp._login._jspService(_login.java, Compiled Code)
at weblogic.servlet.jsp.JspBase.service(JspBase.java, Compiled Code)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
Manager.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-12" (TID:0x6322fb0, sys_thread_t:0x22448d10, state:R,
native ID:0x540) prio=5
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-11" (TID:0x6322e78, sys_thread_t:0x22448ba0, state:R,
native ID:0x5cc) prio=5
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-10" (TID:0x6322a98, sys_thread_t:0x22448a30, state:R,
native ID:0x3ec) prio=5
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-9" (TID:0x6322968, sys_thread_t:0x2244a0a0, state:R,
native ID:0x47c) prio=5
"ExecuteThread-8" (TID:0x6322838, sys_thread_t:0x22449f30, state:MW,
native ID:0x550) prio=5
at java.lang.reflect.Method.invoke(Native Method)
at
com.mycompany.jsp.SessionPageBean.performAllActions(SessionPageBean.java,
Compiled Code)
at jsp._myapp._login._jspService(_login.java, Compiled Code)
at weblogic.servlet.jsp.JspBase.service(JspBase.java, Compiled Code)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
Manager.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-7" (TID:0x6322708, sys_thread_t:0x22449dc0, state:MW,
native ID:0x6c0) prio=5
"ExecuteThread-6" (TID:0x63225d0, sys_thread_t:0x22449c50, state:MW,
native ID:0x624) prio=5
"ExecuteThread-5" (TID:0x6322520, sys_thread_t:0x22449ae0, state:MW,
native ID:0x6dc) prio=5
"ExecuteThread-4" (TID:0x6322370, sys_thread_t:0x2244ed68, state:MW,
native ID:0x60c) prio=5
at java.lang.reflect.Method.invoke(Native Method)
at
com.mycompany.jsp.SessionPageBean.performAllActions(SessionPageBean.java,
Compiled Code)
at jsp._myapp._login._jspService(_login.java, Compiled Code)
at weblogic.servlet.jsp.JspBase.service(JspBase.java, Compiled Code)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
Manager.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-3" (TID:0x6322240, sys_thread_t:0x2244ebf8, state:R,
native ID:0x62c) prio=5
"ExecuteThread-2" (TID:0x6321fb8, sys_thread_t:0x2244ea88, state:R,
native ID:0x6c4) prio=5
"ExecuteThread-1" (TID:0x6321d30, sys_thread_t:0x22447930, state:MW,
native ID:0x53c) prio=5
"ExecuteThread-0" (TID:0x63217c0, sys_thread_t:0x2242fac8, state:MW,
native ID:0x6a0) prio=5
"TimeEventGenerator" (TID:0x63141c8, sys_thread_t:0x2242bb48, state:CW,
native ID:0x5c0) prio=5
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java, Compiled
Code)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java
, Compiled Code)
at java.lang.Thread.run(Thread.java:479)
"SpinnerRandomSource" (TID:0x6313b30, sys_thread_t:0x223c0de8, state:CW,
native ID:0x6ac) prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:424)
at
weblogic.security.SpinnerThread.stopSpinning(SpinnerRandomBitsSource.java,
Compiled Code)
at weblogic.security.SpinnerThread.run(SpinnerRandomBitsSource.java,
Compiled Code)
"SymcJIT-LazyCompilation-1" (TID:0x61afc60, sys_thread_t:0x219a5d48,
state:CW, native ID:0x6bc) prio=1
at SymantecJITCompilationThread.DoCompileMethod(Native Method)
at SymantecJITCompilationThread.run(JITcompilationthread.java, Compiled
Code)
"SymcJIT-LazyCompilation-0" (TID:0x61afca8, sys_thread_t:0x219a4c18,
state:CW, native ID:0x640) prio=1
at SymantecJITCompilationThread.DoCompileMethod(Native Method)
at SymantecJITCompilationThread.run(JITcompilationthread.java, Compiled
Code)
"SymcJIT-LazyCompilation-PA" (TID:0x61afc70, sys_thread_t:0x219a3ae8,
state:CW, native ID:0x6a8) prio=10
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java, Compiled Code)
at SymantecJITCompilationThread.run(JITcompilationthread.java, Compiled
Code)
"Finalizer" (TID:0x61a9320, sys_thread_t:0x2105dfe0, state:CW, native
ID:0x3cc) prio=8
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java, Compiled Code)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java, Compiled Code)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:174)
"Reference Handler" (TID:0x61a93b0, sys_thread_t:0x2105c638, state:CW,
native ID:0x6b8) prio=10
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java, Compiled Code)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:114)
"Signal dispatcher" (TID:0x61a93e0, sys_thread_t:0x21059408, state:R,
native ID:0x498) prio=5
"main" (TID:0x61a91e0, sys_thread_t:0x2f5f90, state:CW, native ID:0x710)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:424)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java, Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:107)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
Monitor Cache Dump:
weblogic.time.common.internal.TimeTable@6BD8660/6F2AFE8: <unowned>
Waiting to be notified:
"HighPriority TimeEventGenerator" (0x24c7fdc8)
java.net.PlainSocketImpl@6BDBA70/7357B08: owner "ListenThread"
(0x24ed8f80) 1 entry
oracle.jdbc.driver.OraclePreparedStatement@5E403B8/D4CF580: owner
"ExecuteThread-8" (0x22449f30) 1 entry
weblogic.kernel.ExecuteThread@6323590/7A400B0: <unowned>
Waiting to be notified:
"NBExecuteThread-1" (0x2245f660)
weblogic.t3.srvr.T3Srvr@61CE7B0/6FC2158: <unowned>
Waiting to be notified:
"main" (0x2f5f90)
SymantecJITCompilationThread@61AFCA8/6EB0288: <unowned>
Waiting to be notified:
"SymcJIT-LazyCompilation-PA" (0x219a3ae8)
com.mycompany.server.proxy.MycompanyProxyBeanEOImpl@5F6FCE0/CBCB850:
owner "ExecuteThread-8" (0x22449f30) 1 entry
weblogic.security.SpinnerThread@6313B30/79AEB20: <unowned>
Waiting to be notified:
"SpinnerRandomSource" (0x223c0de8)
java.lang.ref.ReferenceQueue$Lock@61A9338/6E786E8: <unowned>
Waiting to be notified:
"Finalizer" (0x2105dfe0)
oracle.jdbc.ttc7.TTC7Protocol@63653F0/6FFF008: owner "ExecuteThread-1"
(0x22447930) 1 entry
java.lang.Object@62FCAA8/6FB1388: owner "ExecuteThread-4" (0x2244ed68) 1
entry
java.lang.ref.Reference$Lock@61A93C0/6E78228: <unowned>
Waiting to be notified:
"Reference Handler" (0x2105c638)
weblogic.kernel.ExecuteThread@6323300/7A3F210: <unowned>
Waiting to be notified:
"NBExecuteThread-0" (0x2245e530)
weblogic.time.common.internal.TimeTable@6314D88/79BB7C8: <unowned>
Waiting to be notified:
"TimeEventGenerator" (0x2242bb48)
weblogic.jdbc.common.internal.ConnectionEnv@63652E8/6FFDF70: owner
"ExecuteThread-1" (0x22447930) 1 entry
oracle.jdbc.driver.OracleStatement@5E3EF90/D4DD8C0: owner
"ExecuteThread-1" (0x22447930) 1 entry
Registered Monitor Dump:
SymcJIT Method Monitor: <unowned>
SymcJIT Method Monitor: <unowned>
SymcJIT Method Monitor: <unowned>
SymcJIT Method Monitor: <unowned>
SymcJIT Method Monitor: <unowned>
SymcJIT Lazy Queue Lock: <unowned>
Waiting to be notified:
"SymcJIT-LazyCompilation-0" (0x219a4c18)
"SymcJIT-LazyCompilation-1" (0x219a5d48)
SymcJIT Method Monitor: <unowned>
SymcJIT Method List Monitor: <unowned>
SymcJIT Lock: <unowned>
utf8 hash
table: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class linking lock: <unowned>
System class loader lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Monitor cache lock: owner "Signal dispatcher" (0x21059408) 1 entry
Waiting to enter:
"ExecuteThread-13" (0x22448e80)
"ExecuteThread-8" (0x22449f30)
"ExecuteThread-7" (0x22449dc0)
"ExecuteThread-6" (0x22449c50)
"ExecuteThread-5" (0x22449ae0)
"ExecuteThread-4" (0x2244ed68)
"ExecuteThread-1" (0x22447930)
"ExecuteThread-0" (0x2242fac8)
Thread queue lock: owner "Signal dispatcher" (0x21059408) 1 entry
Monitor registry: owner "Signal dispatcher" (0x21059408) 1 entry

Going through the thread dump
1. it looks like you are not using the Performance Packs (check if
weblogic.system.nativeIO.enable = true in weblogic.properties)
2. since it happens only after about an hour the garbage collector might be
busy which consumes the processor, try using incremental GC while you start
the weblogic server. This could be done with -Xincgc flag.
Hope and wish this solves your problem.
- Nirmal R.
"Michael Reiche" <[email protected]> wrote in message
news:[email protected]...
It looks like the Symantec JIT Compiler is busy compiling methods andthat
the ExecuteThreads (your JSPs) are waiting for them to finish so they can
execute a method (presumably the method that the JIT is busy compiling) -
just a guess.
You may want to try a different JVM - maybe 1.3.0
You could try turning off JIT - then your app would run impossibly slow,but
it would still run.
If you have any large methods - you could try and make them smaller - JVMs
have a hard time with large/complex methods - especially nested try/catch
blocks.
There's no need to cross post - a lot of people read all the groups.
Mike
"Mihir Mehta" <[email protected]> wrote in message
news:[email protected]...
Hi,
I have the following configuration being tested for load.
Weblogic 5.1 SP8, Windows NT, Java 1.2.2, Oracle 8.1.6.
I am running load scripts that access JSP. There are about 15 users
doing
fixed number of different things repeatedly i.e. they login, do a fewthings
and logout. Everything runs fine for about 1 to 2 hours and after that
I
observe CPU at 100 % and users cannot do anything. I took the threaddump,
but this does not reveal any user doing any CPU intesive operations. Allthe
JSP being accessed do finite number of things that take finite time. I
do
not see anything that should make the CPU shoot up to 100 %. Do you haveany
suggestions on how to debug this problem ? I am enclosing the thread
dump
(do you think it is odd that all threads are waiting on signaldispatcher).
Would really appreciate some suggestions.
Thanks,
Mihir
Full thread dump Classic VM (JDK-1.2.2-W, native threads):
"HighPriority TimeEventGenerator" (TID:0x6bd85f8,
sys_thread_t:0x24c7fdc8, state:CW, native ID:0x648) prio=9
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java,Compiled
Code)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.ja
va
, Compiled Code)
at java.lang.Thread.run(Thread.java:479)
"ListenThread" (TID:0x632eb98, sys_thread_t:0x24ed8f80, state:R,native
ID:0x94) prio=5
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java, Compiled Code)
at java.net.ServerSocket.implAccept(ServerSocket.java, Compiled Code)
at java.net.ServerSocket.accept(ServerSocket.java, Compiled Code)
at weblogic.t3.srvr.ListenThread.run(ListenThread.java, Compiled Code)
"NBExecuteThread-1" (TID:0x6323590, sys_thread_t:0x2245f660,
state:CW,
native ID:0x4b4) prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:424)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"NBExecuteThread-0" (TID:0x6323300, sys_thread_t:0x2245e530,state:CW,
native ID:0x618) prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:424)
at weblogic.kernel.ExecuteThread.waitForRequest(ExecuteThread.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-14" (TID:0x6323218, sys_thread_t:0x22448ff0, state:R,
native ID:0x260) prio=5
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
atweblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-13" (TID:0x63230e0, sys_thread_t:0x22448e80,
state:MW,
native ID:0x534) prio=5
at java.lang.reflect.Method.invoke(Native Method)
at com.mycompany.expr.fn.Invoke.eval(Invoke.java, Compiled Code)
at
com.mycompany.jsp.SessionPageBean.performAllActions(SessionPageBean.java,
Compiled Code)
at jsp._myapp._login._jspService(_login.java, Compiled Code)
at weblogic.servlet.jsp.JspBase.service(JspBase.java, Compiled Code)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
Manager.java, Compiled Code)
atweblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-12" (TID:0x6322fb0, sys_thread_t:0x22448d10, state:R,
native ID:0x540) prio=5
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
atweblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-11" (TID:0x6322e78, sys_thread_t:0x22448ba0, state:R,
native ID:0x5cc) prio=5
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
atweblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-10" (TID:0x6322a98, sys_thread_t:0x22448a30, state:R,
native ID:0x3ec) prio=5
at weblogic.socket.NTSocketMuxer.getNextSocket(Native Method)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java,
Compiled Code)
atweblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:23)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-9" (TID:0x6322968, sys_thread_t:0x2244a0a0, state:R,
native ID:0x47c) prio=5
"ExecuteThread-8" (TID:0x6322838, sys_thread_t:0x22449f30, state:MW,
native ID:0x550) prio=5
at java.lang.reflect.Method.invoke(Native Method)
at
com.mycompany.jsp.SessionPageBean.performAllActions(SessionPageBean.java,
Compiled Code)
at jsp._myapp._login._jspService(_login.java, Compiled Code)
at weblogic.servlet.jsp.JspBase.service(JspBase.java, Compiled Code)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
Manager.java, Compiled Code)
atweblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-7" (TID:0x6322708, sys_thread_t:0x22449dc0, state:MW,
native ID:0x6c0) prio=5
"ExecuteThread-6" (TID:0x63225d0, sys_thread_t:0x22449c50, state:MW,
native ID:0x624) prio=5
"ExecuteThread-5" (TID:0x6322520, sys_thread_t:0x22449ae0, state:MW,
native ID:0x6dc) prio=5
"ExecuteThread-4" (TID:0x6322370, sys_thread_t:0x2244ed68, state:MW,
native ID:0x60c) prio=5
at java.lang.reflect.Method.invoke(Native Method)
at
com.mycompany.jsp.SessionPageBean.performAllActions(SessionPageBean.java,
Compiled Code)
at jsp._myapp._login._jspService(_login.java, Compiled Code)
at weblogic.servlet.jsp.JspBase.service(JspBase.java, Compiled Code)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
>
, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java, Compiled Code)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
Manager.java, Compiled Code)
atweblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
"ExecuteThread-3" (TID:0x6322240, sys_thread_t:0x2244ebf8, state:R,
native ID:0x62c) prio=5
"ExecuteThread-2" (TID:0x6321fb8, sys_thread_t:0x2244ea88, state:R,
native ID:0x6c4) prio=5
"ExecuteThread-1" (TID:0x6321d30, sys_thread_t:0x22447930, state:MW,
native ID:0x53c) prio=5
"ExecuteThread-0" (TID:0x63217c0, sys_thread_t:0x2242fac8, state:MW,
native ID:0x6a0) prio=5
"TimeEventGenerator" (TID:0x63141c8, sys_thread_t:0x2242bb48,state:CW,
native ID:0x5c0) prio=5
at java.lang.Object.wait(Native Method)
at weblogic.time.common.internal.TimeTable.snooze(TimeTable.java,Compiled
Code)
at
weblogic.time.common.internal.TimeEventGenerator.run(TimeEventGenerator.java
, Compiled Code)
at java.lang.Thread.run(Thread.java:479)
"SpinnerRandomSource" (TID:0x6313b30, sys_thread_t:0x223c0de8,state:CW,
native ID:0x6ac) prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:424)
at
weblogic.security.SpinnerThread.stopSpinning(SpinnerRandomBitsSource.java,
Compiled Code)
at weblogic.security.SpinnerThread.run(SpinnerRandomBitsSource.java,
Compiled Code)
"SymcJIT-LazyCompilation-1" (TID:0x61afc60, sys_thread_t:0x219a5d48,
state:CW, native ID:0x6bc) prio=1
at SymantecJITCompilationThread.DoCompileMethod(Native Method)
at SymantecJITCompilationThread.run(JITcompilationthread.java, Compiled
Code)
"SymcJIT-LazyCompilation-0" (TID:0x61afca8, sys_thread_t:0x219a4c18,
state:CW, native ID:0x640) prio=1
at SymantecJITCompilationThread.DoCompileMethod(Native Method)
at SymantecJITCompilationThread.run(JITcompilationthread.java, Compiled
Code)
"SymcJIT-LazyCompilation-PA" (TID:0x61afc70,sys_thread_t:0x219a3ae8,
state:CW, native ID:0x6a8) prio=10
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java, Compiled Code)
at SymantecJITCompilationThread.run(JITcompilationthread.java, Compiled
Code)
"Finalizer" (TID:0x61a9320, sys_thread_t:0x2105dfe0, state:CW,native
ID:0x3cc) prio=8
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java, CompiledCode)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java, CompiledCode)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:174)
"Reference Handler" (TID:0x61a93b0, sys_thread_t:0x2105c638,
state:CW,
native ID:0x6b8) prio=10
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java, Compiled Code)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:114)
"Signal dispatcher" (TID:0x61a93e0, sys_thread_t:0x21059408,state:R,
native ID:0x498) prio=5
"main" (TID:0x61a91e0, sys_thread_t:0x2f5f90, state:CW, nativeID:0x710)
prio=5
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:424)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java, Compiled Code)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:107)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
Monitor Cache Dump:
weblogic.time.common.internal.TimeTable@6BD8660/6F2AFE8: <unowned>
Waiting to be notified:
"HighPriority TimeEventGenerator" (0x24c7fdc8)
java.net.PlainSocketImpl@6BDBA70/7357B08: owner "ListenThread"
(0x24ed8f80) 1 entry
oracle.jdbc.driver.OraclePreparedStatement@5E403B8/D4CF580: owner
"ExecuteThread-8" (0x22449f30) 1 entry
weblogic.kernel.ExecuteThread@6323590/7A400B0: <unowned>
Waiting to be notified:
"NBExecuteThread-1" (0x2245f660)
weblogic.t3.srvr.T3Srvr@61CE7B0/6FC2158: <unowned>
Waiting to be notified:
"main" (0x2f5f90)
SymantecJITCompilationThread@61AFCA8/6EB0288: <unowned>
Waiting to be notified:
"SymcJIT-LazyCompilation-PA" (0x219a3ae8)
com.mycompany.server.proxy.MycompanyProxyBeanEOImpl@5F6FCE0/CBCB850:
owner "ExecuteThread-8" (0x22449f30) 1 entry
weblogic.security.SpinnerThread@6313B30/79AEB20: <unowned>
Waiting to be notified:
"SpinnerRandomSource" (0x223c0de8)
java.lang.ref.ReferenceQueue$Lock@61A9338/6E786E8: <unowned>
Waiting to be notified:
"Finalizer" (0x2105dfe0)
oracle.jdbc.ttc7.TTC7Protocol@63653F0/6FFF008: owner
"ExecuteThread-1"
(0x22447930) 1 entry
java.lang.Object@62FCAA8/6FB1388: owner "ExecuteThread-4"(0x2244ed68)
1
entry
java.lang.ref.Reference$Lock@61A93C0/6E78228: <unowned>
Waiting to be notified:
"Reference Handler" (0x2105c638)
weblogic.kernel.ExecuteThread@6323300/7A3F210: <unowned>
Waiting to be notified:
"NBExecuteThread-0" (0x2245e530)
weblogic.time.common.internal.TimeTable@6314D88/79BB7C8: <unowned>
Waiting to be notified:
"TimeEventGenerator" (0x2242bb48)
weblogic.jdbc.common.internal.ConnectionEnv@63652E8/6FFDF70: owner
"ExecuteThread-1" (0x22447930) 1 entry
oracle.jdbc.driver.OracleStatement@5E3EF90/D4DD8C0: owner
"ExecuteThread-1" (0x22447930) 1 entry
Registered Monitor Dump:
SymcJIT Method Monitor: <unowned>
SymcJIT Method Monitor: <unowned>
SymcJIT Method Monitor: <unowned>
SymcJIT Method Monitor: <unowned>
SymcJIT Method Monitor: <unowned>
SymcJIT Lazy Queue Lock: <unowned>
Waiting to be notified:
"SymcJIT-LazyCompilation-0" (0x219a4c18)
"SymcJIT-LazyCompilation-1" (0x219a5d48)
SymcJIT Method Monitor: <unowned>
SymcJIT Method List Monitor: <unowned>
SymcJIT Lock: <unowned>
utf8 hash
table: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class linking lock: <unowned>
System class loader lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Monitor cache lock: owner "Signal dispatcher" (0x21059408) 1 entry
Waiting to enter:
"ExecuteThread-13" (0x22448e80)
"ExecuteThread-8" (0x22449f30)
"ExecuteThread-7" (0x22449dc0)
"ExecuteThread-6" (0x22449c50)
"ExecuteThread-5" (0x22449ae0)
"ExecuteThread-4" (0x2244ed68)
"ExecuteThread-1" (0x22447930)
"ExecuteThread-0" (0x2242fac8)
Thread queue lock: owner "Signal dispatcher" (0x21059408) 1 entry
Monitor registry: owner "Signal dispatcher" (0x21059408) 1 entry

Elements 10 in Win 7 hangs in memory

The product came installed on a new HP desktop. Elements 10 wanted to do an update and I said yes. It told me I had to close the program. It was NOT running. Cancelled the update and tried to run elements 10. Nothing...no errors just nothing. Task manager / processes showed it running so I killed it. Then elements 10 runs but every time I close it, I must kill it in task manger to get it running again without rebooting.
Any suggestions? There is no reinstall since it came installed with the HP desktop. They said I must reload my PC back to factory....yeah right! Not worth it for that. This is my second HP with elements 10 on it and the other PC runs great.
Appreciate any ideas.

Try making a direct shortcut for the Organizer and Editor. Make sure you have the correct file path as there is more than one exe file. You can then launch the programs directly from the desktop bypassing the welcome screen. This is generally better as the welcome screen leaves background processes running.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Then click Next; then click Finish
N.B. on 64 bit systems navigate to Program Files (x86)
　 Then make a direct shortcut for the Editor in a similar manner.
On Windows, Right click anywhere on the desktop and select New >> Shortcut
Then click the browse button and navigate to:
"C:\Program Files\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
Then click Next; then click Finish
N.B. on 64 bit systems navigate to Program Files (x86)

Extreme Win 7 Problems

I have been having a host of problems with getting Windows to run on my Machine. I have tried Win 8, Win 8.1 and Win 7. I am seeing hangs on log off, white blank icons (fixable but occurs regular), extremely long installs of programs and even
delays between icon clicks until program GUI is visible of up to a minute.
I have all updated drivers, what Windows Updates will install (Win update hangs too) and I am running on an AMD Bulldozer 8 Core with 32 GB Ram, 2X Nvidia GTX 570, Dual SSD Drives, etc. The Machine used to be stable for over a year even through Windows
8 Beta etc.
I think I have active hackers hacking my home network and I have captured a strange LAN Ethernet Log on my Router called Sacred Morals. Today I found this and I am looking for a professional opinion (credentials would be great in case I need to go
to law enforcement with the information).
Here is a screen grab of my Windows Credentials I noticed today: The VirtualApp/didlogical entry seems strange to me.
Also, this was logged on my ATT Modem / Router. Is their anyway to spoof a router log to say Ethernet lan from offsite? It makes me feel that they were in my home to do this? Any feedback is much appreciated.

Hi,
According to my experience, I thought it could't be achieved to spoof a router log to say Ethernet Lan from offsite.
Roger Lu
TechNet Community Support

Wine doesn't start utorrent anymore after latest update [SOLVED]

Like the subject says, wine doesn't start utorrent anymore after latest update. The output I get is the following:
$ wine /mnt/data/utorrent/utorrent-1.6.1-beta-build-478.exe
fixme:vxd:VXD_Open Unknown/unsupported VxD L"sice.vxd". Try setting Windows version to 'nt40' or 'win31'.
fixme:vxd:VXD_Open Unknown/unsupported VxD L"ntice.vxd". Try setting Windows version to 'nt40' or 'win31'.
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
fixme:listview:LISTVIEW_SetColumnOrderArray iCount 16 lpiArray 0x33e7b8
fixme:keyboard:UnregisterHotKey (0x30024,1): stub
and then it hangs. If I change my Windows version in winecfg to for instance Windows XP, the first 2 errors disappear, but wine still hangs:
$ wine /mnt/data/utorrent/utorrent-1.6.1-beta-build-478.exe
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
fixme:listview:LISTVIEW_SetColumnOrderArray iCount 16 lpiArray 0x33edf8
fixme:keyboard:UnregisterHotKey (0x30026,1): stub
The vm.legacy_va_layout sysctl is not enabled:
# sysctl vm.legacy_va_layout
vm.legacy_va_layout = 0
Does anybody have an idea to what might be going on?
Enabling DRI and disabling DRI doesn't help. Updating to the latest wine 0.9.30-1 also didn't change anything.
Last edited by tunkaflux (2007-01-31 12:45:44)

Problem is solved. Had to delete the .wine folder. Lost all utorrent settings, but it works again now.

M93P and use of 2 HDD Controller | add additional SATA Controller

Hello,
Has anyone added a second HDD SATA controller to their ThnikCentre M93/p , my is a mini tower, to add SATA HDD ports to their setup. I have try to add a Marvell 88SE9230 based RAID HDD Controller as a second controller, but was not recognized.
Thanks for your help.
Solved!
Go to Solution.

I just added a 2-port PCIe SATA controller, Syba SI-PEX40061, to my M93p. Windows 7 recognized it and automatically installed drivers, and I subsequently installed updated drivers. It's based on Marvell 88SE9120 Chipset. When a HDD is attached, prior to boot, Win 7 hangs. If a HDD is connected after Win 7 has booted, it causes BSOD. Lenovo BIOS is setup for AHCI by default and I set it to allow legacy BIOS support, and the controller has AHCI by default. Still can't get controller to work. HAS ANYONE HAD LUCK WITH AN ADD-ON SATA CONTROLLER?

LR 4.4.1 on Win 8.1 suddenly started to hang when importing via usb from camera

I'm running LR 4.4.1 on Win 8.1 on a fairly new toshiba laptop. Worked fine for a few months; but then I have been unable to solve the problem of Lightroom hanging when I try to import directly from my camera via USB. If I download pics from the camera using file manager, and then point LR at the new folder [once the camera is unplugged], it can then see the folder on the hard drive and will import them without issues. But if the camera is installed, going to the import screen hangs the application.
I have tried:
deleting the lock file
installing and running LR 5
reinstalling LR 4disabling all the usb drivers, rebooting, and enabling
disabling everything in the start menu
deleting the preferences file and letting LR build a new one..
I can import from the SD card reader, but I nervous about that as I have had card corrupted before and lost pics when downloading that way with other laptops.
The camera is a Sony NEX-5N.
Any ideas?
Thanks!
Steve
>>>>>>>>>>>>>>>>
event log
Version=1
EventType=AppHangB1
EventTime=130472785590834411
ReportType=3
Consent=1
UploadTime=130472785614981131
ReportIdentifier=e398cb4c-f441-11e3-8274-0c54a53b1677
IntegratorReportIdentifier=e398cb4d-f441-11e3-8274-0c54a53b1677
NsAppName=lightroom.exe
Response.BucketId=d13f242875f03ea1d90dc78320aec669
Response.BucketTable=5
Response.LegacyBucketId=-441099843
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=lightroom.exe
Sig[1].Name=Application Version
Sig[1].Value=4.4.0.11
Sig[2].Name=Application Timestamp
Sig[2].Value=514b016c
Sig[3].Name=Hang Signature
Sig[3].Value=d6ad
Sig[4].Name=Hang Type
Sig[4].Value=134217729
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.3.9600.2.0.0.768.101
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Hang Signature 1
DynamicSig[22].Value=d6ad1c1631f1be3fa0be5f93b4b2ce60
DynamicSig[23].Name=Additional Hang Signature 2
DynamicSig[23].Value=8549
DynamicSig[24].Name=Additional Hang Signature 3
DynamicSig[24].Value=8549c91a68f857408d66008876c50f3c
DynamicSig[25].Name=Additional Hang Signature 4
DynamicSig[25].Value=5385
DynamicSig[26].Name=Additional Hang Signature 5
DynamicSig[26].Value=5385dfd8333f990f69c3337328fcba6e
DynamicSig[27].Name=Additional Hang Signature 6
DynamicSig[27].Value=fe0a
DynamicSig[28].Name=Additional Hang Signature 7
DynamicSig[28].Value=fe0aee3b66393cac999a4d8bcf79559c
UI[3]=Adobe Photoshop Lightroom 64-bit is not responding
UI[4]=If you close the program, you might lose information.
UI[5]=Close the program
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped responding and was closed
ConsentKey=AppHangXProcB1
AppName=Adobe Photoshop Lightroom 64-bit
AppPath=C:\Program Files\Adobe\Adobe Photoshop Lightroom 4.4\lightroom.exe
ReportDescription=A problem caused this program to stop interacting with Windows.
NsPartner=windows
NsGroup=windows8
ApplicationIdentity=DBF4960C829DDF3499464309618C63A9
<moved from downloading,installatin,setting up - kglad>

You must have Premier Elements that recognizes Videos. Premier Elements is sometimes sold in tandem with Photoshop Elements so that both can operate seamlessly.
Amazon has got special price for buying both packages together. I believe it is a difference of about $20, i.e. you pay 20 bucks more if you buy both products.

Win xp hanging

Similar Messages

Maybe you are looking for