Win XP Installation problem on System with KT880 DELTA FSR

WHen I try install win xp with sp2 included, installation fails in about 19 minute to end in graphical part of installation.
when installation crashes i see only blue screen with
IRQL_NOT_LESS_OR_EQUAL
configuration is here
CyberCase CY 229 ATX se zdrojem 400W
MB MSI KT880 Delta FSR
CPU Athlon XP 2800+ Barton BOX
DIMM 512 CL 2.5 8x32 Apacer
GPU Sapphire Radeon 9600
FDD ALPS 3.5"
HDD WD 80GB IDE on IDE 1
DVD RW LG GSA 4160B Dual on IDE 2
I tried in BIOS agp 4x, vlink and fastwrite disabled, etc..
Help please ..

You can test the memory by downloading this program,
http://www.memtest.org/download/1.40/memtest86+-1.40.floppy.zip
Creates a bootdisk which you must boot from. (Disk cannot be read in windows)
If the PSU cannot provide enough power then running the memory at a lower frequency can help, as 333Mhz uses less power than 400Mhz.
Test the memory at 333Mhz and see if you get any errors, maybe ask a friend to run the memory at 400Mhz with memtest.
If it does run at 400Mhz (200Mhz) without any errors then it is not faulty.
From this point forward you will always test any memory modules that you buy with memtest.
It is a very useful program.

Similar Messages

  • MOVED: MSI KT880 Delta-FSR - problem with multiplier

    This topic has been moved to Overclockers & Modding Corner.
    MSI KT880 Delta-FSR - problem with multiplier

    http://www.rme-audio.com/english/techinfo/nforce2_tweaks_02.htm
    wiretrick it so multipliers under 12.5 will work
    assuming the cpu is an old unlocked one

  • [VIA] MSI KT880 Delta-FSR Bios problem

    Hi!
    I have MSI KT880 Delta-FSR motherboard.My problem is that about every second time when i start my pc BIOS settings will be factory settings.I have to go to bios and change every settings again away.

    I have 120mm fan with my cooler.Temperature of the prosessor is about 44-47 celcius.Cooler is over one year old.
    I have 2*512M PC 3200 memory.They are not same brand/make.In start i have one memory stick, 512M/Kingston and the problem was same.
    All the answers are good what you are writing but i dont understand how those have an effect my BIOS problem ??Sometimes when i start my pc memory clock fz is 266 and its should be 400.I have to go bios the change it and like i write earlier put the onboard lan and ac97 enable.
    I close pc this morning when i goto school.When i come afternoon home and turn my pc on i have this message:
    "Scan devises,please wait...."
    Hardware initiate failed,please check device.The bios does not be installed!Press(g) to continue.
    Reboot and select proper boot device.When i do that there is only my cd-rom device.I cant choose HDD drive at all.
    I shut down the pc and take another computer ( i have 5) bios battery and the pc start at once.Now i have tho follow can the problem be a consequence of that.

  • Self restarting on KT880 DELTA FSR while playing 3d Games

    Hello, got this problem ..
    when playing 3d games, computer restarts itself .. it's about after 5 minutes playing.
    MSI KT880 DELTA FSR
    MSI FX5750 ULTRA 3
    HDD WD 120GB S-ATA
    CPU 2500+ Barton
    APACER 512Mb 400Mhz CL 2.5
    PSU JJ 400W (good amps)
    LG GSA DVD+-RW
    FDD ALPS 3.5"
    i thought it can by by weak PSU, but i change it by better PSU and nothing -  problem remains. So I tried put other GPU (FX5600VTDR) and problem still remains :-(
    WHat now ?
    I thing it can be only by the BIOS version . cause on board is old version 1.3 and on the same configurated computer (except DVD-RW) is 1.6 and everyting works.
    Any help ?
    thanx
    PS: All new drivers are installed, like a Hyperion, etc.

    Hello,
    I am not quite sure,
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=600&kind=1
    Bios updates dont fix any important issues
    Try this and test your memory.
    http://www.memtest.org/download/1.26/memtest86+-1.26.floppy.zip
    any errors means that the ram is faulty.
    Do you have any other ram to use the in kt880?

  • KT880 DELTA FSR & Overclocking

    Tried someone overclock Barton 2800+ on this board ?
    Only by the FSB ?
    Results ?

    Quote
    Originally posted by kolouch
    In Czech republic you can buy it :-)
    MSI KT880 DELTA FSR
    +DualStream
    +PCI/AGP Lock
    I like this board :-)
    Where you can see AGP/PCI frequency?
    I havent got FSB high enough to see it in windows,but in memtest86+ i started to get picture corruption @ 240MHz FSB.
    I´m still trying to get this run stable, atm i´m running 12x205MHz and uptime is about 10hours.
    I´m not sure anymore is it this 2-phase power regulation which makes all these random boots.  
    Last boot was at 12x210MHz 2.0V and i was running EpoX 8K3A+ 12x212MHz 1.95V.

  • KT880 Delta-FSR XP2400 266 fsb support?

    Anyone know if the KT880 Delta-FSR does support my current CPU?
    AMD XP2400 266fsb
    Thanks.

    Very odd chart, it shows the Duron Applebred CPU's as the only 266FSB CPU's supported. One would think that if it can use those, it could use the T-Breds and thornton's as well
    This shows the board only supporting 333/400FSB

  • Oracle10g Installation problem on Linux with DHCP IP

    Hi,
    I am new to Oracle Products, I have tried to install Oracle 10G on Linux with DHCP IP.
    I got the following warning while installing even though I have loopback interface configured.
    Checking Network Configuration requirements ...
    Check complete. The overall result of this check is: Failed <<<<
    Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
    Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    Please help me in resolving this problem or Can I ignore this message?
    My Server Configurations:
    [root@SQAESMRH5 Oracle_Install_Errors]# ifconfig
    eth0 Link encap:Ethernet HWaddr 00:12:3F:79:FA:2C
    inet addr:10.10.121.61 Bcast:10.10.121.2 Mask:255.255.255.0
    inet6 addr: fe80::212:3fff:fe79:fa2c/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:20751998 errors:0 dropped:0 overruns:0 frame:0
    TX packets:19278549 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:2150795393 (2.0 GiB) TX bytes:438232502 (417.9 MiB)
    Interrupt:177
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    inet6 addr: ::1/128 Scope:Host
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:12383146 errors:0 dropped:0 overruns:0 frame:0
    TX packets:12383146 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:1965045834 (1.8 GiB) TX bytes:1965045834 (1.8 GiB)
    [root@SQAESMRH5 Oracle_Install_Errors]# cat /etc/hosts
    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    #::1 localhost6.localdomain6 localhost6
    127.0.0.1 localhost.localdomain localhost
    #::1 localhost6.localdomain6 localhost6
    [root@SQAESMRH5 Oracle_Install_Errors]#

    This warning means it is not recommended to install Oracle 10g on a DHCP assigned IP address. It could work, but you won't be able to configure Enterprise Manager, since this tool requires a fixed IP address. If possible, have the IP address fixed.
    ~ Madrid
    http://hrivera99.blogspot.com/

  • CS-4 Vista 64 Bit Installation problems - "checking system profile...."

    Hello All:
    I know that this has been discussed in the past, but I was hoping that perhaps someone has determined a fix for the following problem.
    Background: In the past, with Windows XP Professional, I never had problems with loading any Adobe products.  But just last week I reluctantly upgraded to Windows Vista Home Premium because it came with a new power system PC that I purchased (AMD quad-core 2.4 gHz Phenom CPU, 8 Gigs of RAM and 1 TB HD) and this is where my problems began:
    Nature of problem:  I loaded the latest versions of Lightroom and Adobe Elements just fine - absolutely no problems there.  But when I tried to load my Photoshop CS-4 upgrade disk, it never gets past the "checking system profile" bar at the very beginning of the install process.  I mean to say that you initially get the install window and when you click "install," a small window comes up which indicates "checking system profile."  Then the progress indicator goes all the way to the right - around 90% to the right but then just hangs there - and I mean stays there...period.  I tried this several times, eventually having to use control/ALT/Delete in each instance to get it to stop.  I even let it stay there for over 6 hours - all to no avail.  What I found interesting is that just about all of my older programs - even those dating back to 2001 - all installed without a problem at all.
    2.  Actions I took to try and correct this:
        a.  Then, in my attempt to find fixes for this, I made sure to close out any background programs that were running (and Vista has a million of 'em), to include Firewall, Windows Defender, any other malware and anti-virus programs, not to mention a bunch of smaller programs that have items running in the background.  Then I tried loading CS-4 again....but still no go, the "checking system profile" indicator just hangs at 90% complete.  Note that at no time did the install process ever load any files at all - I checked everything to ensure this wasn't the case, otherwise I would have removed them.
        b.  On my next try, I then I copied all of the files from the CD to a folder on my desktop and tried to run the program from there - still no go as the "checking system profile" window still hangs at 90%  I even tried loading the program by right clicking on the exe file and installing "as administrator," but that didn't do the trick either.
        c.  Then I rebooted into safe mode, trying both to load the programs first from the CD and then from the desktop folder - still no go, but in this case it told me right up front that the action was unable to be completed.  I assumed this meant that in Windows Safe Mode, the installer was not available.
    Help Needed:  So folks, I know this has been discussed in the past, but I don't know of any fixes that are available.  Can anybody help me through this process?  You can also send me direct emails at:  [email protected] - which means I'd get them right away.
    This has been driving me up a wall because some other folks with Vista 64 Bit systems report that they had no problems with installation.  Again - it never makes it to installation, but gets hung up at the "checking system profile" stage.
    Argggggggg......
    Thanks,
    Ben Herrmann
    Fuquay-Varina, North Carolina

    I believe you are falling victim to some known incombatibility of LR vs. PS CS4 installer. This should be covered in the knowledge base, so check there. A short way to happiness may be using the CS4 Clean Utility to remove the debris from the failed installs and unregister other Adobe installs, then install PS CS4, but since I don't use LR and never have tried this, I'm not sure if this specific case is covered.
    Mylenium

  • DeskJet 932C and Win 7 installation problems

    I recently upgraded my Win XP system to Win 7.  In so doing I first re-formatted the XP system in order to correct problems with it before upgrading.  Now I cannot get Win 7 to find the driver.  It recognizes that the printer is connected but that there is a problem.  I tried inserting the original CD but it won't recognize that either.  I have read all the "solutions" on the HP pages and none of them work.
    I know the 932 is compatible with Win 7 because it is working fine on my laptop which runs Win 7.  How can I get the system to recognize and download the driver?

    Thanks for the suggestions Dave,
    I found a solution
           The DVD I was using worked on HP NC2400, no problems, I found another OEM DVD with 64 Bit Windows 7 and it installed flawlessy.
                      Thanks again Dave
                                                  Slan / Ed

  • Installation Problem on Pentium4 with ORACLE 8.1.7 Client

    I tried to Install the ORACLE Client 8.1.7/8.1.6 on Pentium4 with NT platform. On inserting the CD it gave the first prompt and after Clicking the "INSTALL/DE-INSTALL PRODUCTS", system stops. Checking in the TaskManager helps us to know that 'setup.exe' and 'java.exe' were started for a fraction of the second and then stopped.
    Tried to explore the issue and it seems that the JAVA version which ORACLE is using for the INSTALLATION of 8.1.7 is NonCompatible with the P4[NT Platform].
    However, 8.0.5/8.0.6 Client version were successfully Installed on the same configuration.
    Can Anyone help me out in Installing 8.1.6 on P4[NT base].
    Thanks in advance

    Is the machine you're trying to install on the
    machine your display is running on?
    If not, doing a
    'xhost + name_of_machine_you_are_installing_on'
    on the machine your display is running on should do the
    trick.
    Hope that helps.
    M. Geselle

  • Designer6i Installation Problem on P4 with Win2000

    I get following error and installation aborts:
    cgenrx61.map(0): FILE_NOT_FOUND while
    mapping cgenrx61
    Does anyone know what is happening here?
    Thanks,
    Tony

    To install 8i on a P4 you to search for a patch in metalink to substitute the Instalation Product Program.
    I already have the same problem and I solve it with this patch.
    Best Regards Can anyone list this link? Oracle's search engine stinks! I couldn't find any documentation on the P4 installation issue on the site.

  • CF 9 Win 7 Installation Problem

    I am trying to install Coldfusion 9, Developer Edition, so that I can work on Coldfusion applications through Dreamweaver.  I have downloaded the file coldfusion_9_WWE_win64.  After "Install Anywhere" runs, I have selected most of the default components for the Built-in web server, and "Enable RDS."  The installation process hangs without crashing at "Installing ... Install Merge Module (Build Time): CFDotNet_64.iam.zip"  I have downloaded the latest version of Adobe Creative Suite 5, but it is not running during the installation.  I also have Norton 360, but I have disabled the firewall during the installation.  I have uninstalled and reinstalled both ColdFusion and the Adobe Creative suite, but this problem recurs.  I have Windows 7 Home Premium, "System Type, 64 bit operating system", and no other systems connected to this computer.

    Thank you for your offer to look at the installation log.
    I let the installer run all night, this is what was visible this morning.  The installer was still running.  I forced it to quit, restarted the machine, and configured it through the CF Administrator.  It seems to work.  I can use "live view" through Dreamweaver to see dynamic pages.  So, it seems to have fixed itself, even though the installer never finished properly.
    Here is the log:
    "Severity","ThreadID","Date","Time","Application","Message"
    "Information","main","12/16/10","03:21:46",,"C:\ColdFusion9\logs\server.log initialized"
    "Information","main","12/16/10","03:21:46",,"Starting logging..."
    "Information","main","12/16/10","03:21:46",,"Starting license..."
    "Information","main","12/16/10","03:21:48",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","03:21:48",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","03:21:48",,"Developer Edition enabled"
    "Information","main","12/16/10","03:21:48",,"Starting crypto..."
    "Information","main","12/16/10","03:21:48",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/16/10","03:21:48",,"Starting security..."
    "Information","main","12/16/10","03:21:50",,"Starting scheduler..."
    "Information","main","12/16/10","03:21:50",,"Starting WatchService..."
    "Information","main","12/16/10","03:21:50",,"Starting debugging..."
    "Information","main","12/16/10","03:22:13",,"Starting sql..."
    "Information","main","12/16/10","03:22:14",,"Starting mail..."
    "Information","main","12/16/10","03:22:14",,"Starting runtime..."
    "Information","main","12/16/10","03:22:15",,"CORBA Configuration not enabled"
    "Information","main","12/16/10","03:22:15",,"Starting cron..."
    "Information","main","12/16/10","03:22:15",,"Starting registry..."
    "Information","main","12/16/10","03:22:15",,"Starting client..."
    "Information","main","12/16/10","03:22:15",,"Starting xmlrpc..."
    "Information","main","12/16/10","03:22:15",,"Starting graphing..."
    "Information","main","12/16/10","03:22:16",,"Starting verity..."
    "Information","main","12/16/10","03:22:16",,"Starting solr..."
    "Information","main","12/16/10","03:22:16",,"Starting archive..."
    "Information","main","12/16/10","03:22:16",,"Starting document..."
    "Information","main","12/16/10","03:22:16",,"Starting eventgateway..."
    "Information","main","12/16/10","03:22:16",,"Starting FlexAssembler..."
    "Information","main","12/16/10","03:22:16",,"Starting .NET..."
    "Information","main","12/16/10","03:22:16",,"Starting Monitoring..."
    "Information","main","12/16/10","03:22:17",,"ColdFusion started"
    "Information","web-0","12/16/10","08:19:21",,"Pool Manager Started"
    "Information","Thread-1","12/16/10","11:20:55",,"ColdFusion stopped"
    "Information","main","12/16/10","11:22:54",,"Starting logging..."
    "Information","main","12/16/10","11:22:54",,"Starting license..."
    "Information","main","12/16/10","11:22:58",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","11:22:58",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","11:22:58",,"Developer Edition enabled"
    "Information","main","12/16/10","11:22:58",,"Starting crypto..."
    "Information","main","12/16/10","11:22:58",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/16/10","11:22:58",,"Starting security..."
    "Information","main","12/16/10","11:22:59",,"Starting scheduler..."
    "Information","main","12/16/10","11:22:59",,"Starting WatchService..."
    "Information","main","12/16/10","11:22:59",,"Starting debugging..."
    "Information","main","12/16/10","11:22:59",,"Starting sql..."
    "Information","main","12/16/10","11:22:59",,"Pool Manager Started"
    "Information","main","12/16/10","11:22:59",,"Starting mail..."
    "Information","main","12/16/10","11:22:59",,"Starting runtime..."
    "Information","main","12/16/10","11:23:00",,"CORBA Configuration not enabled"
    "Information","main","12/16/10","11:23:00",,"Starting cron..."
    "Information","main","12/16/10","11:23:00",,"Starting registry..."
    "Information","main","12/16/10","11:23:00",,"Starting client..."
    "Information","main","12/16/10","11:23:01",,"Starting xmlrpc..."
    "Information","main","12/16/10","11:23:03",,"Starting graphing..."
    "Information","main","12/16/10","11:23:04",,"Starting verity..."
    "Information","main","12/16/10","11:23:04",,"Starting solr..."
    "Information","main","12/16/10","11:23:04",,"Starting archive..."
    "Information","main","12/16/10","11:23:04",,"Starting document..."
    "Information","main","12/16/10","11:23:04",,"Starting eventgateway..."
    "Information","main","12/16/10","11:23:05",,"Starting FlexAssembler..."
    "Information","main","12/16/10","11:23:05",,"Starting .NET..."
    "Information","main","12/16/10","11:23:06",,"Starting Monitoring..."
    "Information","main","12/16/10","11:23:06",,"ColdFusion started"
    "Information","main","12/16/10","12:14:09",,"Starting logging..."
    "Information","main","12/16/10","12:14:09",,"Starting license..."
    "Information","main","12/16/10","12:14:11",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","12:14:11",,"Invalid ColdFusion 9 license."
    "Information","main","12/16/10","12:14:11",,"Developer Edition enabled"
    "Information","main","12/16/10","12:14:11",,"Starting crypto..."
    "Information","main","12/16/10","12:14:11",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/16/10","12:14:11",,"Starting security..."
    "Information","main","12/16/10","12:14:11",,"Starting scheduler..."
    "Information","main","12/16/10","12:14:11",,"Starting WatchService..."
    "Information","main","12/16/10","12:14:12",,"Starting debugging..."
    "Information","main","12/16/10","12:14:12",,"Starting sql..."
    "Information","main","12/16/10","12:14:12",,"Pool Manager Started"
    "Information","main","12/16/10","12:14:12",,"Starting mail..."
    "Information","main","12/16/10","12:14:12",,"Starting runtime..."
    "Information","main","12/16/10","12:14:12",,"CORBA Configuration not enabled"
    "Information","main","12/16/10","12:14:12",,"Starting cron..."
    "Information","main","12/16/10","12:14:12",,"Starting registry..."
    "Information","main","12/16/10","12:14:12",,"Starting client..."
    "Information","main","12/16/10","12:14:14",,"Starting xmlrpc..."
    "Information","main","12/16/10","12:14:14",,"Starting graphing..."
    "Information","main","12/16/10","12:14:15",,"Starting verity..."
    "Information","main","12/16/10","12:14:15",,"Starting solr..."
    "Information","main","12/16/10","12:14:15",,"Starting archive..."
    "Information","main","12/16/10","12:14:15",,"Starting document..."
    "Information","main","12/16/10","12:14:15",,"Starting eventgateway..."
    "Information","main","12/16/10","12:14:16",,"Starting FlexAssembler..."
    "Information","main","12/16/10","12:14:16",,"Starting .NET..."
    "Information","main","12/16/10","12:14:16",,"Starting Monitoring..."
    "Information","main","12/16/10","12:14:16",,"ColdFusion started"
    "Information","main","12/17/10","08:20:40",,"Starting logging..."
    "Information","main","12/17/10","08:20:40",,"Starting license..."
    "Information","main","12/17/10","08:20:57",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","08:20:57",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","08:20:57",,"Developer Edition enabled"
    "Information","main","12/17/10","08:20:57",,"Starting crypto..."
    "Information","main","12/17/10","08:20:57",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","08:20:57",,"Starting security..."
    "Information","main","12/17/10","08:20:59",,"Starting scheduler..."
    "Information","main","12/17/10","08:20:59",,"Starting WatchService..."
    "Information","main","12/17/10","08:20:59",,"Starting debugging..."
    "Information","main","12/17/10","08:20:59",,"Starting sql..."
    "Information","main","12/17/10","08:21:00",,"Starting mail..."
    "Information","main","12/17/10","08:21:00",,"Starting runtime..."
    "Information","main","12/17/10","08:21:03",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","08:21:03",,"Starting cron..."
    "Information","main","12/17/10","08:21:03",,"Starting registry..."
    "Information","main","12/17/10","08:21:03",,"Starting client..."
    "Information","main","12/17/10","08:21:03",,"Starting xmlrpc..."
    "Information","main","12/17/10","08:21:04",,"Starting graphing..."
    "Information","main","12/17/10","08:21:05",,"Starting verity..."
    "Information","main","12/17/10","08:21:05",,"Starting solr..."
    "Information","main","12/17/10","08:21:05",,"Starting archive..."
    "Information","main","12/17/10","08:21:05",,"Starting document..."
    "Information","main","12/17/10","08:21:06",,"Starting eventgateway..."
    "Information","main","12/17/10","08:21:06",,"Starting FlexAssembler..."
    "Information","main","12/17/10","08:21:06",,"Starting .NET..."
    "Information","main","12/17/10","08:21:07",,"Starting Monitoring..."
    "Information","main","12/17/10","08:21:07",,"ColdFusion started"
    "Information","Thread-1","12/17/10","08:48:37",,"ColdFusion stopped"
    "Information","main","12/17/10","09:07:31",,"Starting logging..."
    "Information","main","12/17/10","09:07:31",,"Starting license..."
    "Information","main","12/17/10","09:07:33",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:07:33",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:07:33",,"Developer Edition enabled"
    "Information","main","12/17/10","09:07:33",,"Starting crypto..."
    "Information","main","12/17/10","09:07:33",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","09:07:33",,"Starting security..."
    "Information","main","12/17/10","09:07:33",,"Starting scheduler..."
    "Information","main","12/17/10","09:07:34",,"Starting WatchService..."
    "Information","main","12/17/10","09:07:34",,"Starting debugging..."
    "Information","main","12/17/10","09:07:34",,"Starting sql..."
    "Information","main","12/17/10","09:07:34",,"Starting mail..."
    "Information","main","12/17/10","09:07:35",,"Starting runtime..."
    "Information","main","12/17/10","09:07:37",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","09:07:37",,"Starting cron..."
    "Information","main","12/17/10","09:07:37",,"Starting registry..."
    "Information","main","12/17/10","09:07:38",,"Starting client..."
    "Information","main","12/17/10","09:07:39",,"Starting xmlrpc..."
    "Information","main","12/17/10","09:07:40",,"Starting graphing..."
    "Information","main","12/17/10","09:07:41",,"Starting verity..."
    "Information","main","12/17/10","09:07:41",,"Starting solr..."
    "Information","main","12/17/10","09:07:41",,"Starting archive..."
    "Information","main","12/17/10","09:07:41",,"Starting document..."
    "Information","main","12/17/10","09:07:42",,"Starting eventgateway..."
    "Information","main","12/17/10","09:07:42",,"Starting FlexAssembler..."
    "Information","main","12/17/10","09:07:42",,"Starting .NET..."
    "Information","main","12/17/10","09:07:43",,"Starting Monitoring..."
    "Information","main","12/17/10","09:07:43",,"ColdFusion started"
    "Information","Thread-1","12/17/10","09:13:57",,"ColdFusion stopped"
    "Information","main","12/17/10","09:22:01",,"Starting logging..."
    "Information","main","12/17/10","09:22:01",,"Starting license..."
    "Information","main","12/17/10","09:22:02",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:22:02",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:22:02",,"Developer Edition enabled"
    "Information","main","12/17/10","09:22:03",,"Starting crypto..."
    "Information","main","12/17/10","09:22:03",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","09:22:03",,"Starting security..."
    "Information","main","12/17/10","09:22:03",,"Starting scheduler..."
    "Information","main","12/17/10","09:22:03",,"Starting WatchService..."
    "Information","main","12/17/10","09:22:03",,"Starting debugging..."
    "Information","main","12/17/10","09:22:03",,"Starting sql..."
    "Information","main","12/17/10","09:22:03",,"Starting mail..."
    "Information","main","12/17/10","09:22:04",,"Starting runtime..."
    "Information","main","12/17/10","09:22:04",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","09:22:04",,"Starting cron..."
    "Information","main","12/17/10","09:22:04",,"Starting registry..."
    "Information","main","12/17/10","09:22:04",,"Starting client..."
    "Information","main","12/17/10","09:22:05",,"Starting xmlrpc..."
    "Information","main","12/17/10","09:22:06",,"Starting graphing..."
    "Information","main","12/17/10","09:22:06",,"Starting verity..."
    "Information","main","12/17/10","09:22:06",,"Starting solr..."
    "Information","main","12/17/10","09:22:06",,"Starting archive..."
    "Information","main","12/17/10","09:22:06",,"Starting document..."
    "Information","main","12/17/10","09:22:06",,"Starting eventgateway..."
    "Information","main","12/17/10","09:22:07",,"Starting FlexAssembler..."
    "Information","main","12/17/10","09:22:07",,"Starting .NET..."
    "Information","main","12/17/10","09:22:07",,"Starting Monitoring..."
    "Information","main","12/17/10","09:22:07",,"ColdFusion started"
    "Information","Thread-1","12/17/10","09:32:07",,"ColdFusion stopped"
    "Information","main","12/17/10","09:44:30",,"Starting logging..."
    "Information","main","12/17/10","09:44:30",,"Starting license..."
    "Information","main","12/17/10","09:44:33",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:44:33",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:44:33",,"Developer Edition enabled"
    "Information","main","12/17/10","09:44:34",,"Starting crypto..."
    "Information","main","12/17/10","09:44:34",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","09:44:34",,"Starting security..."
    "Information","main","12/17/10","09:44:35",,"Starting scheduler..."
    "Information","main","12/17/10","09:44:35",,"Starting WatchService..."
    "Information","main","12/17/10","09:44:35",,"Starting debugging..."
    "Information","main","12/17/10","09:44:36",,"Starting sql..."
    "Information","main","12/17/10","09:44:36",,"Starting mail..."
    "Information","main","12/17/10","09:44:36",,"Starting runtime..."
    "Information","main","12/17/10","09:44:36",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","09:44:36",,"Starting cron..."
    "Information","main","12/17/10","09:44:36",,"Starting registry..."
    "Information","main","12/17/10","09:44:36",,"Starting client..."
    "Information","main","12/17/10","09:44:36",,"Starting xmlrpc..."
    "Information","main","12/17/10","09:44:37",,"Starting graphing..."
    "Information","main","12/17/10","09:44:37",,"Starting verity..."
    "Information","main","12/17/10","09:44:37",,"Starting solr..."
    "Information","main","12/17/10","09:44:37",,"Starting archive..."
    "Information","main","12/17/10","09:44:37",,"Starting document..."
    "Information","main","12/17/10","09:44:37",,"Starting eventgateway..."
    "Information","main","12/17/10","09:44:38",,"Starting FlexAssembler..."
    "Information","main","12/17/10","09:44:38",,"Starting .NET..."
    "Information","main","12/17/10","09:44:38",,"Starting Monitoring..."
    "Information","main","12/17/10","09:44:38",,"ColdFusion started"
    "Information","Thread-1","12/17/10","09:48:28",,"ColdFusion stopped"
    "Information","main","12/17/10","09:50:23",,"Starting logging..."
    "Information","main","12/17/10","09:50:23",,"Starting license..."
    "Information","main","12/17/10","09:50:25",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:50:25",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","09:50:25",,"Developer Edition enabled"
    "Information","main","12/17/10","09:50:25",,"Starting crypto..."
    "Information","main","12/17/10","09:50:25",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","09:50:25",,"Starting security..."
    "Information","main","12/17/10","09:50:25",,"Starting scheduler..."
    "Information","main","12/17/10","09:50:25",,"Starting WatchService..."
    "Information","main","12/17/10","09:50:25",,"Starting debugging..."
    "Information","main","12/17/10","09:50:25",,"Starting sql..."
    "Information","main","12/17/10","09:50:26",,"Starting mail..."
    "Information","main","12/17/10","09:50:26",,"Starting runtime..."
    "Information","main","12/17/10","09:50:26",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","09:50:26",,"Starting cron..."
    "Information","main","12/17/10","09:50:26",,"Starting registry..."
    "Information","main","12/17/10","09:50:27",,"Starting client..."
    "Information","main","12/17/10","09:50:28",,"Starting xmlrpc..."
    "Information","main","12/17/10","09:50:30",,"Starting graphing..."
    "Information","main","12/17/10","09:50:32",,"Starting verity..."
    "Information","main","12/17/10","09:50:33",,"Starting solr..."
    "Information","main","12/17/10","09:50:33",,"Starting archive..."
    "Information","main","12/17/10","09:50:33",,"Starting document..."
    "Information","main","12/17/10","09:50:34",,"Starting eventgateway..."
    "Information","main","12/17/10","09:50:35",,"Starting FlexAssembler..."
    "Information","main","12/17/10","09:50:35",,"Starting .NET..."
    "Information","main","12/17/10","09:50:35",,"Starting Monitoring..."
    "Information","main","12/17/10","09:50:39",,"ColdFusion started"
    "Information","Thread-1","12/17/10","11:03:02",,"ColdFusion stopped"
    "Information","main","12/17/10","11:04:52",,"Starting logging..."
    "Information","main","12/17/10","11:04:52",,"Starting license..."
    "Information","main","12/17/10","11:04:53",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","11:04:53",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","11:04:53",,"Developer Edition enabled"
    "Information","main","12/17/10","11:04:53",,"Starting crypto..."
    "Information","main","12/17/10","11:04:53",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","11:04:53",,"Starting security..."
    "Information","main","12/17/10","11:04:54",,"Starting scheduler..."
    "Information","main","12/17/10","11:04:54",,"Starting WatchService..."
    "Information","main","12/17/10","11:04:54",,"Starting debugging..."
    "Information","main","12/17/10","11:04:54",,"Starting sql..."
    "Information","main","12/17/10","11:04:54",,"Starting mail..."
    "Information","main","12/17/10","11:04:54",,"Starting runtime..."
    "Information","main","12/17/10","11:04:54",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","11:04:54",,"Starting cron..."
    "Information","main","12/17/10","11:04:54",,"Starting registry..."
    "Information","main","12/17/10","11:04:54",,"Starting client..."
    "Information","main","12/17/10","11:04:55",,"Starting xmlrpc..."
    "Information","main","12/17/10","11:04:55",,"Starting graphing..."
    "Information","main","12/17/10","11:04:56",,"Starting verity..."
    "Information","main","12/17/10","11:04:56",,"Starting solr..."
    "Information","main","12/17/10","11:04:56",,"Starting archive..."
    "Information","main","12/17/10","11:04:56",,"Starting document..."
    "Information","main","12/17/10","11:04:56",,"Starting eventgateway..."
    "Information","main","12/17/10","11:05:06",,"Starting FlexAssembler..."
    "Information","main","12/17/10","11:05:06",,"Starting .NET..."
    "Information","main","12/17/10","11:05:06",,"Starting Monitoring..."
    "Information","main","12/17/10","11:05:06",,"ColdFusion started"
    "Information","main","12/17/10","11:17:23",,"Starting logging..."
    "Information","main","12/17/10","11:17:23",,"Starting license..."
    "Information","main","12/17/10","11:17:24",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","11:17:24",,"Invalid ColdFusion 9 license."
    "Information","main","12/17/10","11:17:24",,"Developer Edition enabled"
    "Information","main","12/17/10","11:17:24",,"Starting crypto..."
    "Information","main","12/17/10","11:17:24",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/17/10","11:17:24",,"Starting security..."
    "Information","main","12/17/10","11:17:24",,"Starting scheduler..."
    "Information","main","12/17/10","11:17:24",,"Starting WatchService..."
    "Information","main","12/17/10","11:17:24",,"Starting debugging..."
    "Information","main","12/17/10","11:17:24",,"Starting sql..."
    "Information","main","12/17/10","11:17:25",,"Starting mail..."
    "Information","main","12/17/10","11:17:25",,"Starting runtime..."
    "Information","main","12/17/10","11:17:25",,"CORBA Configuration not enabled"
    "Information","main","12/17/10","11:17:25",,"Starting cron..."
    "Information","main","12/17/10","11:17:25",,"Starting registry..."
    "Information","main","12/17/10","11:17:25",,"Starting client..."
    "Information","main","12/17/10","11:17:26",,"Starting xmlrpc..."
    "Information","main","12/17/10","11:17:29",,"Starting graphing..."
    "Information","main","12/17/10","11:17:29",,"Starting verity..."
    "Information","main","12/17/10","11:17:29",,"Starting solr..."
    "Information","main","12/17/10","11:17:29",,"Starting archive..."
    "Information","main","12/17/10","11:17:29",,"Starting document..."
    "Information","main","12/17/10","11:17:29",,"Starting eventgateway..."
    "Information","main","12/17/10","11:17:42",,"Starting FlexAssembler..."
    "Information","main","12/17/10","11:17:42",,"Starting .NET..."
    "Information","main","12/17/10","11:17:42",,"Starting Monitoring..."
    "Information","main","12/17/10","11:17:42",,"ColdFusion started"
    "Information","web-1","12/17/10","11:31:35",,"Pool Manager Started"
    "Information","Thread-1","12/17/10","11:38:21",,"ColdFusion stopped"
    "Information","main","12/20/10","08:29:24",,"Starting logging..."
    "Information","main","12/20/10","08:29:24",,"Starting license..."
    "Information","main","12/20/10","08:29:49",,"Invalid ColdFusion 9 license."
    "Information","main","12/20/10","08:29:49",,"Invalid ColdFusion 9 license."
    "Information","main","12/20/10","08:29:49",,"Developer Edition enabled"
    "Information","main","12/20/10","08:29:50",,"Starting crypto..."
    "Information","main","12/20/10","08:29:50",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/20/10","08:29:50",,"Starting security..."
    "Information","main","12/20/10","08:29:51",,"Starting scheduler..."
    "Information","main","12/20/10","08:29:51",,"Starting WatchService..."
    "Information","main","12/20/10","08:29:51",,"Starting debugging..."
    "Information","main","12/20/10","08:29:52",,"Starting sql..."
    "Information","main","12/20/10","08:29:52",,"Starting mail..."
    "Information","main","12/20/10","08:29:52",,"Starting runtime..."
    "Information","main","12/20/10","08:29:54",,"CORBA Configuration not enabled"
    "Information","main","12/20/10","08:29:54",,"Starting cron..."
    "Information","main","12/20/10","08:29:54",,"Starting registry..."
    "Information","main","12/20/10","08:29:54",,"Starting client..."
    "Information","main","12/20/10","08:29:54",,"Starting xmlrpc..."
    "Information","main","12/20/10","08:29:55",,"Starting graphing..."
    "Information","main","12/20/10","08:29:56",,"Starting verity..."
    "Information","main","12/20/10","08:29:56",,"Starting solr..."
    "Information","main","12/20/10","08:29:56",,"Starting archive..."
    "Information","main","12/20/10","08:29:56",,"Starting document..."
    "Information","main","12/20/10","08:29:56",,"Starting eventgateway..."
    "Information","main","12/20/10","08:29:57",,"Starting FlexAssembler..."
    "Information","main","12/20/10","08:29:57",,"Starting .NET..."
    "Information","main","12/20/10","08:29:58",,"Starting Monitoring..."
    "Information","main","12/20/10","08:29:58",,"ColdFusion started"
    "Information","main","12/21/10","08:52:19",,"Starting logging..."
    "Information","main","12/21/10","08:52:19",,"Starting license..."
    "Information","main","12/21/10","08:52:21",,"Invalid ColdFusion 9 license."
    "Information","main","12/21/10","08:52:21",,"Invalid ColdFusion 9 license."
    "Information","main","12/21/10","08:52:21",,"Developer Edition enabled"
    "Information","main","12/21/10","08:52:21",,"Starting crypto..."
    "Information","main","12/21/10","08:52:21",,"Installed JSafe JCE provider: Version 3.6 RSA Security Inc. Crypto-J JCE Security Provider (implements RSA, DSA, Diffie-Hellman, AES, DES, Triple DES, DESX, RC2, RC4, RC5, PBE, MD2, MD5, RIPEMD160, SHA1, SHA224, SHA256, SHA384, SHA512, HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, HMAC-SHA512)"
    "Information","main","12/21/10","08:52:21",,"Starting security..."
    "Information","main","12/21/10","08:52:22",,"Starting scheduler..."
    "Information","main","12/21/10","08:52:23",,"Starting WatchService..."
    "Information","main","12/21/10","08:52:23",,"Starting debugging..."
    "Information","main","12/21/10","08:52:51",,"Starting sql..."
    "Information","main","12/21/10","08:52:52",,"Starting mail..."
    "Information","main","12/21/10","08:52:52",,"Starting runtime..."
    "Information","main","12/21/10","08:52:56",,"CORBA Configuration not enabled"
    "Information","main","12/21/10","08:52:56",,"Starting cron..."
    "Information","main","12/21/10","08:52:56",,"Starting registry..."
    "Information","main","12/21/10","08:52:56",,"Starting client..."
    "Information","main","12/21/10","08:52:56",,"Starting xmlrpc..."
    "Information","main","12/21/10","08:52:58",,"Starting graphing..."
    "Information","main","12/21/10","08:52:59",,"Starting verity..."
    "Information","main","12/21/10","08:52:59",,"Starting solr..."
    "Information","main","12/21/10","08:52:59",,"Starting archive..."
    "Information","main","12/21/10","08:52:59",,"Starting document..."
    "Information","main","12/21/10","08:52:59",,"Starting eventgateway..."
    "Information","main","12/21/10","08:53:00",,"Starting FlexAssembler..."
    "Information","main","12/21/10","08:53:00",,"Starting .NET..."
    "Information","main","12/21/10","08:53:00",,"Starting Monitoring..."
    "Information","main","12/21/10","08:53:00",,"ColdFusion started"

  • [VIA] KT880 Delta FSR with VIA Vinyl has problems with MIC

    I have problem with my MB, can't get to select MIC for input way, all that I get is Vinyl AC'97 Audio (WAVE) for playback device and also for recording device, and that is all i get for recording device. I lost that option since I instaled SATA HDD. Previously I had old paralel ATA HDD. Please HELP!

    Misteriously, the problem is solved. I don't known how happen but is gone.
    But, if i unplug the power cord from the pc or from the UPS the problem persist. I think that is a incompatibility issue with voltages or with video card, anyway is "mid" solved.
    There aren't so many computer shop but i post these links in spanish:
    http://www.computadoraspormenos.com
    http://www.computadorasenlared.com
    http://www.mpmcomputer.com
    http://www.eliptek.com.do
    http://www.samanel.com
    Individual Sale Market
    http://www.emarket.com.do/index.php?seccion=mercado&funcion=ver&categoria=3&PHPSESSID=5388a4b0ddf2f9f76193cee453c8b863
    Thanks a lot for you appreciated help!!!

  • 570GTX TWIN FROZR II OC R win 7 installation problem

    Hello guys,
    I just formatted my computer, I have a fresh installation. When I install the latest Driver 306.97 and restart everything goes crazy.
    Desktop icons disappear, when I press crtl+alt+delete its blacked out, on the other hand i can start programs but  they are invisible i can hear them but cant see them. I tried with updating the windows with all updates. Installing the original driver from the CD.
    Any ideas?
    I also tried loading the motherboard drives first then installing the graphic driver...
    Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
    VGA MSI|N570GTX TWIN FROZR II OC R
    Mushkin Enhanced Blackline 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model 996988
    ASUS P8P67 LE <REV 3.0> LGA 1155 SATA 6Gbps and USB 3.0 Supported
    Corsair Professional Series Gold High Performance 850-Watt Power Supply CMPSU-850AX
    Intel P67 DDR3 2200 ATX Motherboard
    I have NOCTUA NH-D14 as CPU cooler
    SilverStone Fortress FT02
    OCZ Technology 60 GB Vertex 2 Series SATA II 2.5-Inch Solid State Drive

    thats what i did previously... downloaded http://www.msi.com/product/vga/N570GTX-Twin-Frozr-II-OC.html#/?div=Driver&os=Win7%2064 this drive.
    I had no luck with that. Anything else i could try?

  • Wine-mono installation problem.

    On starting of winecfg, the error pops that "Mono is not found and to run .net applications it is needed", I clicked on 'install' but the download doesn't progress, it's stucked like forever (~35-40 minutes) and no, my internet is not slow.
    Is there anyway I can download wine-mono manually and install it ? I did tried wine-mono from sourceforge but the download speed is very poor (like 2 to 5 Kbps). Tried different mirrors too, same result. Is there anyother place from where i can get latest wine-mono ?
    Last edited by NewbLinuxUser (2015-04-18 08:57:20)

    Not sure what you mean. Did you install the package from the repos https://www.archlinux.org/packages/?sort=&q=wine-mono ?

Maybe you are looking for

  • Upgrade my hard drive

    I have a Macbook that I need to upgrade my hard drive to the maximun size and speed possible.  Is it something that I can do or only Apple?  And if so, how difficult is it.

  • How can I download previous version of Photoshop CC because my 3rd party plug-in (Kwik) is not compatible with Photoshop CC 2014.

    In the Creative Cloud where it shows I have Photoshop CC 2014 installed, it says "Previous versions" and doesn't show any prior versions of Photoshop. I need Photoshop CC because my Kwik plug-in won't work in the 2014 version. How can I download it?

  • Mapping conversion of source value 4448601.75 to target value 448601

    Mapping conversion of source value 4448601.75 to target value 4448601 or source value 999999.99 to target value 999999 Here standard functions like round, floor, ceil..etc, will not work because they will convert source value 4448601.75 to 4448602 an

  • Autofill form text fields from database

    I have made a form in asp code with text fields. Behind this page is a database (access). This database contains static information and does not need to be updated. It is only for output. In this form, there are some text fields to be filled in. Refe

  • Coloring a table row

    I have a scenario in which i populate data in table ui thru Rfc call.Now I select a particular row then on clicking of a button the row color should change.how do i change colors of a particular row at runtime? Note:dont not post blogs of colorful ta