Win XP Serv Pk 3 "Limited or no Connectivity" Error on Ethernet and Airport

Hi,
I have a 2009 MacBook Pro (dual boot) with a fresh install of Windows XP, SP3 and Boot Camp drivers. But I can’t get it to work properly with any other computer on a network, connected via ethernet or wifi. I have a "Limited or no Connectivity” message at all times. Other computers on my network can connect to my MBP, but I can’t connect to them. The MBP is sending out hundreds of packets, but only receiving 1 or 2. It also fails when trying to establish an IP address with my network.
I am a long time mac user and unfamiliar with Windows networking, any help would be very much appreciated!
Thanks!
Christopher

OK... I'm... annoyed, to say the least.
I have just set up XP-SP3 under bootcamp. Installation went fine, it boots, I'm in Windoze now.
I can seem to get it to interface with my Airport Extreme basestation. (I had to connect my ethernet to get on-line here)
I get to a window that says "choose a wireless network". I pick my DJ Tempo's network. (It works just fine under OS 10.6.5.)
I click "connect".
I get a window that says "The network 'DJ Tempo's Network' requires a network key (also called a WEP key or WPA key). A network key helps prevent unknown intruders from connecting to this network."
I put in the password for my Basestation, and click "connect".
I then get a window that says "The network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 ascii characters or 10 or 26 hex...
This is probably where my problem lies. My Basestation password is not 5 or 13 characters.
Have I told you enough to arrive at a conclusion?
ANY help will be most appreciated. It's a perfect example of why "I don't do Windoze".

Similar Messages

  • HT1338 Software Update can't connect to the update server. Make sure you're connected to the Internet, and then try again

    I have been getting this message on MAC OS 10.6.3  "Software Update can’t connect to the update server. Make sure you’re connected to the Internet, and then try again". Internet is working fine for everything else. Updating to 10.6.8 and applying all the security updates and patches [directly downloading from the apple website] has not resolved the issue. Read somewhere about a software update enabler for 10.6, installed it, but not helping.. [not sure of the update server settings to be entered] .Is there no way to make the software update work from the Apple Start Menu??

    Problem solved.. Expired rules in Little Snitch caused the glitch

  • WRT54G - Limited or no connectivity error

    My wireless network had been working fine for about 2 months. About a week ago I started to experience an intermittent problem.  I will get an error message on the wireless network icon in the windows icon tray that I have "limited or no connectivity".  The signal strength remains "excellent" and the speed is 54.0 Mbs.  I will sometimes also get a message that there is an IP conflict on the network.  The computer that is wired to the router continues to have internet access.  The problem appears to affect only the wirelessly connected computer.  
    Powering down and then back up the entire network does not resolve the problem.  One night I went to bed with the error occurring, but the next morning things were working. It worked for a few hours, but when I returned in the evening the problem had returned.
    I need help before I have to scrap another wireless router.

    Are you using any fixed LAN IP addresses on your network.  If so, please list the the fixed LAN IP addresses that you are using, and also state your DHCP server range.
    Also, are you running an open (unencrypted) wireless network?

  • Sql server 2000 type4 driver for jdbc connection error

    hello,
    I am trying to connect m ms sql server 2000 database server with type 4 driver.But I am getting an connection error like *"Error Establishing Socket"* .Can any one please help me out?

    Well i personally prefer usage of open source MS SQL SERVER 2k jdbc driver called jtds instead of the driver provided by MS themselves(which is proproteriry) as i had similar problem which i personally encountered when i was using it.
    go through the below link for further info.
    http://jtds.sourceforge.net/
    REGARDS,
    RaHuL

  • Server not found or Unable to connect error message.

    I am running Windows 7 with Firefox 3.6.8, the latest version. From time to time a page will come up "server not found" or "unable to connect." I do not have this problem with Internet Explorer. But, I would prefer to use Firefox. Also, it seems to be getting worse lately. I am using an ethernet connection.

    https://support.mozilla.com/en-US/kb/Server+not+found
    http://kb.mozillazine.org/Error_loading_websites

  • Mini Server, bridging Ethernet and Airport ?

    Hy there.
    I´ve got a Mini running 10.5 Server with Ethernet en0 and Airport. To set up for testing I´m want to set the Mini as a wireless bridge. With NAT and the gateway assistant, I`m only apple to set up routing with a block Airport -> Ethernet. In detail:
    Ethernet 192.168.100.x
    Airport 192.168.1.x with NAT and DHCP
    Clients connected to Airport aren`t able to go to the 192.168.100.x network.
    Is it possible to bridge the two nic´s?
    Aggregation won´t work on Airport.
    Thanks for reply.

    The network configuration details and the goals aren't entirely clear (to me) here, so I'm going to shot-gun several answers here. I (also) don't know how experienced you are with IP networking and terminology; apologies in advance.
    "Bridging" occurs at layer 2 and is relatively comparable to a network cable or such and thus arguably transparent to network traffic (you can't "see" a bridge at the network layer any more than you can "see" a hunk of network cable), where "Routing" is layer 3 and typically involves IP addresses and a routing stack. Bridging doesn't involve an IP network address for the intermediate device, where routing does.
    Your Mac Mini here lacks bridging capabilities, and would be either a non-routing host or (with two NICs and a requirement to route traffic through) an IP router.
    Various Airport devices can be configured as routers or as bridges. The default configuration is the former; as a WiFi router. If you want to run the Airport as a bridge, then it won't have an IP address. Various folks will refer to a WiFi device set up as a bridge as an Access Point, as well.
    Depending on the subnet configuration (and I will here assume you are using two subnets here, the 192.168.1.0/24 and 192.168.100.0/24 subnets) and if you're using your Airport as a router in 192.168.100.0/24, you'll need to set up the Mac Mini or another IP router-capable device in 192.168.1.0/24 as the default IP gateway (default router) within the Airport configuration. That default gateway (router) will itself need a path to the wider Internet, and routes to other subnets.
    Getting a Mac to function as a router and as a network gateway (and with NAT and firewall) is possible, but you'll have to set up the default routes appropriately. It's generally (far!) easier to use an external box for this purpose; a dedicated firewall and NAT and router box. It's also something I typically prefer; having users and software configuration changes and the usual sorts of activity found on a Mac OS X or Mac OS X Server occurring on a firewall can risk (accidentally, unintentionally) open up a remote exposure.
    If you want to use link aggregation with Mac OS X Server, then you'll usually need a network switch capable of IEEE 802.3ad link aggregation. AFAIK, Airport doesn't provide link aggregation.
    Apropos of nothing else in this reply, if you're planning to eventually use VPNs (tunnels), I'd also suggest getting out of 192.168.0.0/16 address range (and into 10.0.0.0/8 or 172.16.0.0/12, per RFC 1918), everybody uses that, and various tunnels need unique subnets both locally and on the target end of the connection.
    Here's an intro to [networking, routers and firewall|http://labs.hoffmanlabs.com/node/275] pieces, and a previous discussion of [IEEE 802.3ad link aggregation, BGP and such|http://discussions.apple.com/thread.jspa?messageID=9141545] here in the forums.
    It's my general preference to block access to the LAN with a dedicated firewall/NAT/router box for the reasons described above as well as other reasons; that box can act as the default gateway for all subnets, as well.
    If I've entirely missed your question with the above answer(s), hopefully the above can help us get a little closer to your particular goal and an appropriate solution.

  • Oracle 8.1.7 on Win 2K Server DC

    I installed an 8.1.7 Enterprise Edition version of Oracle 8i on Win 2K Server DC.
    At the first moment, I ran SQLPlus and there was no errors. Now, when I try to execute SQLPlus again, the following errors are displayed:
    ORA-01034: Oracle not available.
    ORA-27101: Shared memory realm does not exist.
    At the installation process, the database was created by default.
    Any ideas?

    Your Oracle instance is not running. Start it in SVRMGRL, in the command prompt window:-
    SVRMGRLSVRMGR>connect internal
    Connected.
    SVRMGR>startup
    SVRMGR>Oracle instance started etc...
    SVRMGR>quit
    As to why it's not starting, I have installed Oracle on many Windows NT and 2000 servers, and this happens where the Server is a PDC, I have no idea why.
    You can execute the above as a script from autoexec to ensure that the database is running, but I'm sure there's a better way to fix it.
    I installed an 8.1.7 Enterprise Edition version of
    Oracle 8i on Win 2K Server DC.
    At the first moment, I ran SQLPlus and there was no
    errors. Now, when I try to execute SQLPlus again, the
    following errors are displayed:
    ORA-01034: Oracle not available.
    ORA-27101: Shared memory realm does not exist.
    At the installation process, the database was created
    by default.
    Any ideas?

  • Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

    Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
    "Connection Error - Failure to get file list from server. An entry with the same key already exists."
    I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
    is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
    All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
    Issue Persists....
    Thanks in advance,
    Justin

    Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
    This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

  • The server is available on your computer. Access the volumes and files locally.

    I have actually solved this issue. However, it was not easy to find support for this specific issue. Here's the problem and solution that worked for me.
    The Problem
    I had an issue with my Macbook Pro and Mac Pro connecting to each other. All of a sudden, I got this message "The server COMPUTERNAME is available on your computer. Access the volumes and files locally."
    The Solution
    After a bit of digging, I found this article:
    http://www.alexanderwilde.com/2011/04/os-x-lion-connection-error-with-afp-and-wo rkaround/
    Steps 1 and 2 of that article seemed to do the trick for me:
    Launch /Applications/Utilities/Terminal and do:
    sudo chmod o+w /Library/Preferences
    defaults write /Library/Preferences/com.apple.AppleShareClient afp_host_prefs_version -int 1
    Now restart your computer.
    From Finder, select an AFP server, or use “Connect To…”.  This will cause the AFP Client to create the full preferences file.
    Thanks to http://www.alexanderwilde.com for helping me solve this.

    Hi,
    I also encountered this error but in a different situation : after having restored my Lion installation from a Time Machine backup, everything was okay except that I couldn't connect to any disk attached to my Airport extreme.
    I searched for hours and even restored my backup a second time. The problem is specific to only one client since my Macbook was still able to connect to the AE. I ended up resetting all the settings on the AE and restoring them one by one.
    The problem appears when I restore the address range distributed by the AE's DHCP server to the one that was configured before.
    Thus the solution seems to change this address range. Must be something related to a network route or cache or anything like this.
    I hope it will help anybody who encounters this problem. Luckily it seems there are very few : the number of occurences of this problem in google is very low.
    Matt

  • Trying to configure a Win 2003 Server to use TLS server authentication . . .

    I am trying to
    configure a Win 2003 Server to use TLS server authentication following Method 2 in KB 895443 - see below:-
    Method 2: By using the Certificate Request Wizard
    The following steps describe how to obtain a certificate from a Windows Server 2003 Certification Authority. You can also request a certificate from a Windows 2000
    Certification Authority. Additionally, you must have Read permissions and Enroll permissions on the certificate template file to successfully request a certificate. Use this method if one or more of the following conditions are true:
    You want to request a certificate from an Enterprise Certification Authority.
    You want to request a certificate that is based on a template where the subject name is generated by Windows.
    You want to obtain a certificate that does not require administrator approval before the certificate is issued.
    To obtain a certificate, follow these steps:
    Click Start, click Run, type mmc, and then click OK.
    On the File menu, click Add/Remove Snap-in.
    Click Add, click Certificates, and then click Add.
    Click Computer account, and then click Next.
    If you want to add a certificate to the local computer, click Local computer. If you want to add a certificate to a remote computer, click Another
    computer, and then type the name of that remote computer in the Another computer box.
    Click Finish.
    In the Add Standalone Snap-in dialog box, click Close, and then click OK in the Add/Remove
    Snap-in dialog box.
    Under Console Root, click Certificates (Local Computer).
    Note If you configured the Certificates MMC snap-in to manage a remote computer, click Certificates (servername)instead of Certificates (Local Computer).
    On the View menu, click Options.
    In the View Options dialog box, click Certificate purpose, and then click OK.
    In the right pane, right-click Server Authentication, point to All Tasks, and then click Request New Certificate.
    In the Certificate Request Wizard that starts, click Next.
    In the Certificate types list, click Server Authentication, click to select the Advanced check box,
    and then click Next.
    In the Cryptographic Service Providers list, click Microsoft RSA SChannel Cryptographic Provider.
    I get as far as step 11 and I get the error message:-
    The wizard cannot be started because of one or more of the following conditions:
    - There are no trusted certification authorities (CAs) available.
    - You do not have the permissions to request certificates from the available CAs.
    - The available CAs issue certificates for which you do not have permissions.
    This is covered in KB 927066 – see below:-
    To resolve the problem, follow these steps:
    Verify that the CERTSVC_DCOM_ACCESS group exists in the domain that hosts the certification authority. This group is in the CN=Users container.
    To do this, follow these steps:
    Click Start, click Run,
    type Dsa.msc, and then click OK.
    In the left pane, click the Users container.
    Verify that the CERTSVC_DCOM_ACCESS group is in the right
    pane. If the CERTSVC_DCOM_ACCESS group is not in the right pane, go to step 4.
    Verify that the CERTSVC_DCOM_ACCESS group includes the following member groups:
    Domain Users
    Domain Computers
    If these member groups do not exist in the CERTSVC_DCOM_ACCESS group, go to step 4. 
    Note If users or computers in other domains need to enroll against the certification authority, you must also add those users and computers to the CERTSVC_DCOM_ACCESS group. If the current problem occurs on a domain
    controller, you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group. By default, domain controllers are not members of the Domain Computers global group. Therefore, domain controllers
    do not have sufficient DCOM permissions.
    Verify that the CERTSVC_DCOM_ACCESS group has the appropriate DCOM Access permissions and DCOM Launch and Activation permissions on the computer that hosts the certification
    authority.
    Click Start, point to Program,
    point to Administrative Tools, and then click Component Services.
    Expand the Component Services node.
    Expand the Computers node.
    Right-click the My Computer node, and
    then click Properties.
    Click the COM Security tab.
    Under Access Permission, click Edit
    Limits.
    Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Access and Allow
    Remote Access permissions, and then click Cancel.
    Under Launch and Activation Permissions, click Edit
    Limits.
    Verify that the CERTSVC_DCOM_ACCESS group has Allow Local Activation and Allow
    Remote Activationpermissions, and then click Cancel.
    Click Cancel, and then close the Component
    Services console.
    Settings may be incorrect if any one of the following conditions is true:
    The CERTSVC_DCOM_ACCESS group does not exist.
    The default membership of the CERTSVC_DCOM_ACCESS group is incorrect.
    The CERTSVC_DCOM_ACCESS group does not have the correct permissions.
    If any one setting is incorrect, run the following commands at a command prompt. Press ENTER after each command.
    certutil -setreg SetupStatus -SETUP_DCOM_SECURITY_UPDATED_FLAG
    net stop certsvc
    net start certsvc
    Repeat steps 1 through 3 to verify that all the settings are correct.
    Note If the changes affect the group membership of the certification authority server, you must restart the server for the changes to take effect.
    The only part of the above instructions which I have not been able to complete is:-
    “you must also add the Enterprise Domain Controllers group to the CERTSVC_DCOM_ACCESS group”.
    When I click on the CERTSVC_DCOM_ACCESS user then click the Members tab & go to add Enterprise Domain Controllers the option is not there.

    Hi Nick,
    Have you successfully set up an enterprise CA?
    If yes, is the enterprise CA’s certificate located under the Trusted Root Certification Authorities store?
    Best Regards,
    Amy

  • MaxDB install failure on Win 2003 Server

    Win 2003 Server
    MaxDB v 7.6.05.09
    HP Proliant G5
    Good morning,
    We've got a problem with a MaxDB install on a fresh Win 2003 server.
    - The first install process and the demo database worked fine
    - We tried to create a new database instance and it hung. As nothing was working as expected we decided to uninstall maxdb and all its component and to re-start from a clean process. That's were things are becoming weird :
    - The first time the setup assistant hung when installing the kernel
    - The secund time the setup assistant hung when installing the demo database
    - Every following test hangs when installing the kernel
    We tried to do a clean uninstall MaxDB, to watch which registry keys we should restore... but nothings worked as expected.
    We found a link at this address describing the same problem but it doesn't provide us anything to solve our problem.
    Here is our log file :
    INSTALLER_INFO: Version = 7.6.05 Build 009-123-191-997
    INSTALLER_INFO: Changelist = 191997
    INSTALLER_INFO: MakeId = 323091
    INSTALLER_INFO: Type = kit
    SYS_INFO: Host name = SRVBATINOR
    SYS_INFO: System = Windows
    SYS_INFO: Architecture = I386
    SYS_INFO: Version = NT 5.2
    SYS_INFO: Subversion = Service Pack 2
    MSG: collector found 12 archives
    MSG: debug package SDBBAS.SDB is valid
    MSG: debug package SDBKRN.SDB is valid
    MSG: debug package SDBUTL.SDB is valid
    MSG: initializing package "Base"
    MSG: calling preinstall...
    MSG: service "sql6" in  "C:/WINDOWS/system32/drivers/etc/services" found
    MSG: service "sapdbni72" in  "C:/WINDOWS/system32/drivers/etc/services" found
    MSG: Template set indep data path to "c:/documents and settings/all users/application data/sdb/data"
    MSG: Template set indep programs path to "c:/program files/sdb/programs"
    ACTION: make directory "c:/documents and settings/all users/application data/sdb/data/config" mode "775"
    ACTION: make directory "c:/documents and settings/all users/application data/sdb/data/config/install" mode "775"
    MSG: InstallRegistry: space check ok: 41676028 kb on C: (51203980 kb total) available
    MSG: install registry successfully locked
    MSG: InstallRegistry::Log: space check ok: 41676028 kb on C: (51203980 kb total) available
    MSG: writing 0 packages
    MSG: net install registry size = 63 bytes
    MSG: wrote install registry (125 bytes)
    MSG: InstallRegistry: reserved 1024 kb disk space
    getRelease():C:/Program Files/SDB/MAXDB1/pgm/kernel.exe not found
    MSG: migrate server installation data for INSTROOT "c:/program files/sdb/maxdb1"
    MSG: initializing package "Server Utilities"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "Database Kernel"
    MSG: calling preinstall...
    MSG: Template or instance update set dependent path to c:/program files/sdb/maxdb1
    Msg: checking update of package "Database Kernel" in C:Program Filessdbmaxdb1
    MSG: installed package is flaged as invalid => skipping update check
    MSG: initializing package "Redist Python"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "Loader"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "ODBC"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "Messages"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "JDBC"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "Synchronization Manager"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "SQLDBC"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "MaxDB PHP Driver"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    MSG: initializing package "DB Analyzer"
    MSG: calling preinstall...
    MSG: path was set by preinstall script (c:/program files/sdb/programs)
    ACTION: make directory "C:/Program Files/sdb" mode "555"
    ACTION: make directory "C:/Program Files/sdb/programs" mode "555"
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBBAS.TGZ"
    MSG: running postprepare of package Base
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBUTL.TGZ"
    ACTION: make directory "C:/Program Files/sdb/MAXDB1" mode "555"
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBKRN.TGZ"
    MSG: running postprepare of package Database Kernel
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBRDPY.TGZ"
    MSG: running postprepare of package Redist Python
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBLD.TGZ"
    MSG: running postprepare of package Loader
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBODBC.TGZ"
    MSG: running postprepare of package ODBC
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBMSG.TGZ"
    MSG: running postprepare of package Messages
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBJDBC.TGZ"
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SYNCMAN.TGZ"
    MSG: running postprepare of package Synchronization Manager
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBC.TGZ"
    MSG: running postprepare of package Database Connectivity
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBPHP.TGZ"
    STDOUT: start extraction test run of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBANA.TGZ"
    MSG: running postprepare of package DB Analyzer
    MSG: space check ok: 41672820 kb on  (51203980 kb total) available
    MSG: packagedata of package Base changed
    MSG: writing 2 packages
    MSG: net install registry size = 4113 bytes
    MSG: wrote install registry (5162 bytes)
    STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBBAS.TGZ"
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:58:53 bin/
    STDOUT: extracting: -rwxr-xr-x       802816 2008-08-15 21:53:13 bin/dbmevtdisp.exe
    STDOUT: extracting: -rwxr-xr-x       294912 2008-08-15 21:49:43 bin/protconv.exe
    STDOUT: extracting: -rwxr-xr-x       151552 2008-08-15 20:11:07 bin/sdbconfig.exe
    STDOUT: extracting: -rwxr-xr-x         7168 2008-08-16 00:57:39 bin/SDBINST.EXE
    STDOUT: extracting: -rwxr-xr-x         6144 2008-08-16 00:57:40 bin/sdbpack.exe
    STDOUT: extracting: -rwxr-xr-x         7680 2008-08-16 00:57:40 bin/sdbreg.exe
    STDOUT: extracting: -rwxr-xr-x         7680 2008-08-16 00:57:40 bin/sdbregview.exe
    STDOUT: extracting: -rwxr-xr-x        13824 2008-08-16 00:57:39 bin/SDBSETUP.EXE
    STDOUT: extracting: -rwxr-xr-x         7680 2008-08-16 00:57:39 bin/sdbuninst.exe
    STDOUT: extracting: -rwxr-xr-x         7168 2008-08-16 00:57:40 bin/sdbverify.exe
    STDOUT: extracting: -rwxr-xr-x      1257472 2008-08-16 00:35:29 bin/sqlcli.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xsysrc.exe
    STDOUT: extracting: -rwxr-xr-x       323584 2008-08-15 20:24:45 bin/xtcpupd.exe
    STDOUT: extracting: -rwxr-xr-x       294912 2008-08-15 19:55:07 bin/xuser.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_ping.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:58:53 install/
    STDOUT: extracting: -rwxr-xr-x       192512 2008-08-16 00:54:07 install/Grid.dll
    STDOUT: extracting: -rwxr-xr-x       757760 2008-08-16 00:41:09 install/perl58.dll
    STDOUT: extracting: -rw-rr       117099 2008-08-16 00:57:38 install/RESOURCES.TGZ
    STDOUT: extracting: -rw-rr       465022 2008-08-16 00:57:38 install/SDBINST.TGZ
    STDOUT: extracting: -rwxr-xr-x       421888 2008-08-16 00:57:27 install/sdbrun.dll
    STDOUT: extracting: -rwxr-xr-x      1245184 2008-08-16 00:56:33 install/Wx.dll
    STDOUT: extracting: -rwxr-xr-x      2265088 2008-08-16 00:53:37 install/wxmsw24.dll
    STDOUT: extracting: -rw-rr        64327 2008-08-16 00:57:42 install/WXPERL.TGZ
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:58:54 pgm/
    STDOUT: extracting: -rwxr-xr-x      2101248 2008-08-15 21:49:55 pgm/dbmcli.exe
    STDOUT: extracting: -rwxr-xr-x      2101248 2008-08-15 21:49:55 pgm/dbmcli_HelpInst.exe
    STDOUT: extracting: -rwxr-xr-x       217088 2008-08-15 22:11:27 pgm/regupd.exe
    STDOUT: extracting: -rwxr-xr-x       307200 2008-08-15 20:25:09 pgm/sqlping.exe
    STDOUT: extracting: -rwxr-xr-x        49152 2008-08-15 19:46:03 pgm/sqltcp.dll
    STDOUT: extracting: -rwxr-xr-x        49152 2008-08-15 19:46:03 pgm/sqltcp1.dll
    STDOUT: extracting: -rwxr-xr-x        49152 2008-08-15 19:46:05 pgm/sqltcp2.dll
    STDOUT: extracting: -rwxr-xr-x        45056 2008-08-15 19:46:07 pgm/sqltcpn.dll
    STDOUT: extracting: -rwxr-xr-x       281952 2008-08-16 00:58:28 pgm/sqluser72.dll
    STDOUT: extracting: -rwxr-xr-x       372672 2008-08-16 00:58:32 pgm/sqluser73.dll
    STDOUT: extracting: -rwxr-xr-x       393216 2008-08-16 00:58:35 pgm/sqluser74.dll
    STDOUT: extracting: -rwxr-xr-x       438272 2008-08-16 00:58:38 pgm/sqluser74n.dll
    STDOUT: extracting: -rwxr-xr-x       524288 2008-08-16 00:15:41 pgm/sqluser76.dll
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:01 Support/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:02 Support/Mapfiles/
    STDOUT: extracting: -rw-rr      3023564 2008-08-15 21:49:54 Support/Mapfiles/dbmcli.map
    STDOUT: extracting: -rw-rr      1265024 2008-08-15 21:53:13 Support/Mapfiles/dbmevtdisp.map
    STDOUT: extracting: -rw-rr       115063 2008-08-15 20:28:06 Support/Mapfiles/sqltcp.map
    STDOUT: extracting: -rw-rr       115066 2008-08-15 20:28:07 Support/Mapfiles/sqltcp1.map
    STDOUT: extracting: -rw-rr       115148 2008-08-15 20:28:09 Support/Mapfiles/sqltcp2.map
    STDOUT: extracting: -rw-rr       108889 2008-08-15 20:28:13 Support/Mapfiles/sqltcpn.map
    STDOUT: extracting: -rw-rr       125887 2008-08-16 00:58:30 Support/Mapfiles/sqluser72.map
    STDOUT: extracting: -rw-rr       147341 2008-08-16 00:58:33 Support/Mapfiles/sqluser73.map
    STDOUT: extracting: -rw-rr       258131 2008-08-16 00:58:36 Support/Mapfiles/sqluser74.map
    STDOUT: extracting: -rw-rr       739428 2008-08-16 00:58:39 Support/Mapfiles/sqluser74n.map
    STDOUT: extracting: -rw-rr       916710 2008-08-16 00:15:41 Support/Mapfiles/sqluser76.map
    STDOUT: extracting: -rw-rr       593052 2008-08-15 20:24:45 Support/Mapfiles/xtcpupd.map
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:04 symbols/
    STDOUT: extracting: -rw-rr      8252416 2008-08-15 21:49:54 symbols/dbmcli.pdb
    STDOUT: extracting: -rw-rr      3836928 2008-08-15 21:53:13 symbols/dbmevtdisp.pdb
    STDOUT: extracting: -rw-rr       289792 2008-08-15 20:28:06 symbols/sqltcp.pdb
    STDOUT: extracting: -rw-rr       289792 2008-08-15 20:28:07 symbols/sqltcp1.pdb
    STDOUT: extracting: -rw-rr       289792 2008-08-15 20:28:09 symbols/sqltcp2.pdb
    STDOUT: extracting: -rw-rr       281600 2008-08-15 20:28:13 symbols/sqltcpn.pdb
    STDOUT: extracting: -rw-rr      1887232 2008-08-16 00:58:37 symbols/sqluser74.pdb
    STDOUT: extracting: -rw-rr      2059264 2008-08-16 00:58:40 symbols/sqluser74n.pdb
    STDOUT: extracting: -rw-rr      4705280 2008-08-15 20:24:44 symbols/xtcpupd.pdb
    STDOUT: checking unpacked archive... MSG: check file "Support/Mapfiles/sqluser72.map": ok
    MSG: check file "symbols/sqltcpn.pdb": ok
    MSG: check file "pgm/dbmcli_HelpInst.exe": ok
    MSG: check file "bin/x_ping.exe": ok
    MSG: check file "Support/Mapfiles/sqluser74.map": ok
    MSG: check file "bin/SDBINST.EXE": ok
    MSG: check file "install/SDBINST.TGZ": ok
    MSG: check file "pgm/sqluser74.dll": ok
    MSG: check file "symbols/dbmcli.pdb": ok
    MSG: check file "symbols/sqltcp1.pdb": ok
    MSG: check file "bin/SDBSETUP.EXE": ok
    MSG: check file "pgm/sqluser74n.dll": ok
    MSG: check file "Support/Mapfiles/sqltcp.map": ok
    MSG: check file "bin/protconv.exe": ok
    MSG: check file "symbols/sqltcp.pdb": ok
    MSG: check file "Support/Mapfiles/sqltcpn.map": ok
    MSG: check file "install/WXPERL.TGZ": ok
    MSG: check file "install/wxmsw24.dll": ok
    MSG: check file "install/sdbrun.dll": ok
    MSG: check file "bin/xuser.exe": ok
    MSG: check file "pgm/sqluser73.dll": ok
    MSG: check file "pgm/sqluser76.dll": ok
    MSG: check file "symbols/xtcpupd.pdb": ok
    MSG: check file "pgm/sqltcp1.dll": ok
    MSG: check file "Support/Mapfiles/sqluser74n.map": ok
    MSG: check file "pgm/dbmcli.exe": ok
    MSG: check file "pgm/sqltcp.dll": ok
    MSG: check file "install/RESOURCES.TGZ": ok
    MSG: check file "Support/Mapfiles/dbmevtdisp.map": ok
    MSG: check file "Support/Mapfiles/sqluser73.map": ok
    MSG: check file "Support/Mapfiles/xtcpupd.map": ok
    MSG: check file "bin/sdbverify.exe": ok
    MSG: check file "bin/xsysrc.exe": ok
    MSG: check file "Support/Mapfiles/sqltcp1.map": ok
    MSG: check file "Support/Mapfiles/sqltcp2.map": ok
    MSG: check file "install/perl58.dll": ok
    MSG: check file "Support/Mapfiles/sqluser76.map": ok
    MSG: check file "bin/sdbuninst.exe": ok
    MSG: check file "pgm/regupd.exe": ok
    MSG: check file "symbols/dbmevtdisp.pdb": ok
    MSG: check file "pgm/sqlping.exe": ok
    MSG: check file "bin/sdbpack.exe": ok
    MSG: check file "symbols/sqltcp2.pdb": ok
    MSG: check file "pgm/sqltcpn.dll": ok
    MSG: check file "pgm/sqluser72.dll": ok
    MSG: check file "symbols/sqluser74.pdb": ok
    MSG: check file "Support/Mapfiles/dbmcli.map": ok
    MSG: check file "pgm/sqltcp2.dll": ok
    MSG: check file "bin/dbmevtdisp.exe": ok
    MSG: check file "bin/sdbregview.exe": ok
    MSG: check file "bin/xtcpupd.exe": ok
    MSG: check file "install/Grid.dll": ok
    MSG: check file "bin/sdbconfig.exe": ok
    MSG: check file "symbols/sqluser74n.pdb": ok
    MSG: check file "bin/sdbreg.exe": ok
    MSG: check file "install/Wx.dll": ok
    MSG: check file "bin/sqlcli.exe": ok
    STDOUT: ok
    STDOUT: checking system libraries...MSG: update test sytem file "C:/WINDOWS/system32/mfc70.dll"
    MSG: system file "mfc70.dll" inside archive has version 7.00.9466.0
    MSG: installed system file "mfc70.dll" is up to date (version 7.00.9466.0)
    MSG: update test sytem file "C:/WINDOWS/system32/mfc70u.dll"
    MSG: system file "mfc70u.dll" inside archive has version 7.00.9466.0
    MSG: installed system file "mfc70u.dll" is up to date (version 7.00.9466.0)
    MSG: update test sytem file "C:/WINDOWS/system32/mfc71.dll"
    MSG: system file "mfc71.dll" inside archive has version 7.10.3077.0
    MSG: installed system file "mfc71.dll" is up to date (version 7.10.3077.0)
    MSG: update test sytem file "C:/WINDOWS/system32/mfc71u.dll"
    MSG: system file "mfc71u.dll" inside archive has version 7.10.3077.0
    MSG: installed system file "mfc71u.dll" is up to date (version 7.10.3077.0)
    MSG: update test sytem file "C:/WINDOWS/system32/msvcr70.dll"
    MSG: system file "msvcr70.dll" inside archive has version 7.00.9466.0
    MSG: installed system file "msvcr70.dll" is up to date (version 7.00.9466.0)
    MSG: update test sytem file "C:/WINDOWS/system32/msvcr71.dll"
    MSG: system file "msvcr71.dll" inside archive has version 7.10.3052.4
    MSG: installed system file "msvcr71.dll" is up to date (version 7.10.3052.4)
    STDOUT:  ok
    SYS: "C:Program Filessdbprograms insdbconfig.exe" "IndepPrograms=C:Program Filessdbprograms"
    SYS: "C:Program Filessdbprograms insdbconfig.exe" "IndepData=C:Documents and SettingsAll UsersApplication Datasdbdata"
    STDOUT: system path updated successfully
    STDOUT: please reboot your system after installation to take effect changes
    MSG: registry subkey "SOFTWAREMicrosoft" exist
    MSG: registry subkey "SOFTWAREMicrosoftWindows" exist
    MSG: registry subkey "SOFTWAREMicrosoftWindowsCurrentVersion" exist
    MSG: registry subkey "SOFTWAREMicrosoftWindowsCurrentVersionUninstall" exist
    MSG: created registry subkey "SOFTWAREMicrosoftWindowsCurrentVersionUninstallSAP DB (ALL)" successfully
    ACTION: make directory "C:/Documents and Settings/All Users/Menu DÈmarrer/Programmes/MaxDB" mode "775"
    ACTION: make directory "C:/Documents and Settings/All Users/Menu DÈmarrer/Programmes/MaxDB/Command Line Tools" mode "775"
    MSG: start menu shortcuts created
    MSG: packagedata of package Base changed
    MSG: writing 2 packages
    MSG: net install registry size = 32157 bytes
    MSG: wrote install registry (36384 bytes)
    MSG: packagedata of package Server Utilities changed
    MSG: writing 3 packages
    MSG: net install registry size = 32773 bytes
    MSG: wrote install registry (37403 bytes)
    STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBUTL.TGZ"
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:53 bin/
    STDOUT: extracting: -rwxr-xr-x        65536 2008-08-15 21:52:21 bin/sdbinfo.exe
    STDOUT: extracting: -rwxr-xr-x       356352 2008-08-16 00:05:31 bin/sqlrun.dll
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/sysmon.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xbackup.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xinstinfo.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xpu.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_analys.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_cons.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_server.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_show.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_start.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_stop.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_wiz.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_wizard.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_wizstop.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_wiztrc.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:53 env/
    STDOUT: extracting: -rw-rr          122 2008-08-15 22:02:13 env/serv.use
    STDOUT: extracting: -rw-rr          245 2008-08-15 22:02:13 env/xstart.use
    STDOUT: extracting: -rw-rr          542 2008-08-15 22:02:13 env/xstop.use
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:53 etc/
    STDOUT: extracting: -rw-rr          207 2008-08-15 19:42:23 etc/VERSIONS
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:53 pgm/
    STDOUT: extracting: -rwxr-xr-x       483328 2008-08-15 20:11:45 pgm/serv.exe
    STDOUT: extracting: -rwxr-xr-x       307200 2008-08-15 20:11:09 pgm/show.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:54 Support/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:54 Support/Mapfiles/
    STDOUT: extracting: -rw-rr       839796 2008-08-15 20:11:44 Support/Mapfiles/serv.map
    STDOUT: extracting: -rw-rr       540173 2008-08-15 20:11:08 Support/Mapfiles/show.map
    STDOUT: extracting: -rw-rr       615852 2008-08-16 00:05:31 Support/Mapfiles/sqlrun.map
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 00:59:55 symbols/
    STDOUT: extracting: -rw-rr      2575360 2008-08-15 20:11:44 symbols/serv.pdb
    STDOUT: extracting: -rw-rr      2051072 2008-08-15 20:11:08 symbols/show.pdb
    STDOUT: extracting: -rw-rr      2075648 2008-08-16 00:05:31 symbols/sqlrun.pdb
    STDOUT: checking unpacked archive... MSG: check file "bin/x_wizstop.exe": ok
    MSG: check file "bin/x_analys.exe": ok
    MSG: check file "bin/x_cons.exe": ok
    MSG: check file "bin/xpu.exe": ok
    MSG: check file "bin/sysmon.exe": ok
    MSG: check file "bin/x_start.exe": ok
    MSG: check file "pgm/serv.exe": ok
    MSG: check file "env/xstart.use": ok
    MSG: check file "bin/x_server.exe": ok
    MSG: check file "bin/sqlrun.dll": ok
    MSG: check file "etc/VERSIONS": ok
    MSG: check file "bin/x_wiz.exe": ok
    MSG: check file "bin/xbackup.exe": ok
    MSG: check file "Support/Mapfiles/sqlrun.map": ok
    MSG: check file "symbols/show.pdb": ok
    MSG: check file "bin/x_show.exe": ok
    MSG: check file "symbols/sqlrun.pdb": ok
    MSG: check file "env/serv.use": ok
    MSG: check file "env/xstop.use": ok
    MSG: check file "symbols/serv.pdb": ok
    MSG: check file "pgm/show.exe": ok
    MSG: check file "bin/x_wizard.exe": ok
    MSG: check file "bin/sdbinfo.exe": ok
    MSG: check file "bin/xinstinfo.exe": ok
    MSG: check file "bin/x_wiztrc.exe": ok
    MSG: check file "Support/Mapfiles/show.map": ok
    MSG: check file "Support/Mapfiles/serv.map": ok
    MSG: check file "bin/x_stop.exe": ok
    STDOUT: ok
    SYS: "c:program filessdbprograms inx_server.exe" install: 19712 INFO: Service 'XServer' is already installed
    SYS: "c:program filessdbprograms inx_server.exe" remove: 19710 INFO: Service 'XServer' removed successfully
    SYS: "c:program filessdbprograms inx_server.exe" install: 19709 INFO: Service 'XServer' installed successfully
    MSG: SYSTEM PATH is up to date
    MSG: packagedata of package Server Utilities changed
    MSG: writing 3 packages
    MSG: net install registry size = 39793 bytes
    MSG: wrote install registry (45406 bytes)
    MSG: packagedata of package Database Kernel changed
    MSG: writing 3 packages
    MSG: net install registry size = 39793 bytes
    MSG: wrote install registry (45405 bytes)
    MSG: no function "register" in package Database Kernel
    MSG: set function reference "unregister" in package Database Kernel
    MSG: set function reference "preuninstall" in package Database Kernel
    MSG: set function reference "postuninstall" in package Database Kernel
    MSG: no function "verify" in package Database Kernel
    STDOUT: unregister Database Kernel 7.6.5.9
    WRN: cannot execute command: xregcomp -u "c:program filessdbmaxdb1pgmdbpinstall": cannot create process, Le fichier spÈcifiÈ est introuvable.
    WRN: cannot execute command: xregcomp -u "c:program filessdbprogramsliblivecachedbg": cannot create process, Le fichier spÈcifiÈ est introuvable.
    SYS: dbmcli -R "c:program filessdbmaxdb1" inst_unreg : Error! Connection failed to node (local) for database (no dbname):
    SYS: dbmcli -R "c:program filessdbmaxdb1" inst_unreg : dbmsrv executable not found
    STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBKRN.TGZ"
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:15 bin/
    STDOUT: extracting: -rwxr-xr-x       274432 2008-08-15 21:51:01 bin/backint.exe
    STDOUT: extracting: -rwxr-xr-x       802816 2008-08-15 21:53:13 bin/dbmevtdisp.exe
    STDOUT: extracting: -rwxr-xr-x       552960 2008-08-15 21:53:27 bin/dbmevthndl_display.exe
    STDOUT: extracting: -rwxr-xr-x       569344 2008-08-15 21:53:37 bin/dbmevthndl_winlog.exe
    STDOUT: extracting: -rwxr-xr-x       290816 2008-08-15 21:48:43 bin/dbmsrvctl.exe
    STDOUT: extracting: -rwxr-xr-x        41705 2008-08-15 19:51:15 bin/ireport.py
    STDOUT: extracting: -rwxr-xr-x       245760 2008-08-15 21:52:11 bin/pipe2file.exe
    STDOUT: extracting: -rwxr-xr-x      1232896 2008-08-15 21:51:09 bin/sdbfill.exe
    STDOUT: extracting: -rwxr-xr-x       356352 2008-08-16 00:05:31 bin/sqlrun.dll
    STDOUT: extracting: -rwxr-xr-x        53248 2008-08-15 19:55:01 bin/sqlver.exe
    STDOUT: extracting: -rwxr-xr-x        53248 2008-08-15 19:55:01 bin/sqlwhat.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xkernprot.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xservice.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/xtracesort.exe
    STDOUT: extracting: -rwxr-xr-x        40960 2008-08-16 00:05:33 bin/x_diagnose.exe
    STDOUT: extracting: -rwxr-xr-x       331776 2008-08-15 21:53:55 bin/x_python.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:07 cluster/
    STDOUT: extracting: -rwxr-xr-x      2121728 2008-08-15 20:24:13 cluster/dbmsrv_clu.exe
    STDOUT: extracting: -rwxr-xr-x        81920 2008-08-15 20:12:33 cluster/SAPDBMSCSEx.dll
    STDOUT: extracting: -rwxr-xr-x       122880 2008-08-15 20:12:43 cluster/sapdbmscsman.dll
    STDOUT: extracting: -rwxr-xr-x        77824 2008-08-15 20:12:07 cluster/SAPDBMSCSMan.exe
    STDOUT: extracting: -rwxr-xr-x        57344 2008-08-15 20:12:01 cluster/SAPDBMSCSRes.dll
    STDOUT: extracting: -rwxr-xr-x       307200 2008-08-15 20:12:57 cluster/service_clu.exe
    STDOUT: extracting: -rwxr-xr-x       499712 2008-08-15 20:12:55 cluster/serv_clu.exe
    STDOUT: extracting: -rwxr-xr-x       339968 2008-08-15 20:12:53 cluster/stop_clu.exe
    STDOUT: extracting: -rwxr-xr-x       339968 2008-08-15 20:12:51 cluster/strt_clu.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:07 demo/
    STDOUT: extracting: -rw-rr      3110911 2008-08-15 19:51:15 demo/HOTEL.py
    STDOUT: extracting: -rwxr-xr-x          367 2008-08-15 19:51:15 demo/ltutorial.py
    STDOUT: extracting: -rw-rr        11333 2008-08-15 19:51:15 demo/tutoriallib.py
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:17 doc/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:19 doc/FirstSteps/
    STDOUT: extracting: -rw-rr         3455 2008-08-15 19:51:15 doc/FirstSteps/index.html
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:18 doc/FirstSteps/Java/
    STDOUT: extracting: -rw-rr         1019 2008-08-15 19:51:15 doc/FirstSteps/Java/DemodbData.class
    STDOUT: extracting: -rw-rr         1536 2008-08-15 19:51:15 doc/FirstSteps/Java/DemodbData.java
    STDOUT: extracting: -rw-rr         1599 2008-08-15 19:51:15 doc/FirstSteps/Java/HelloMaxDB.class
    STDOUT: extracting: -rw-rr         1459 2008-08-15 19:51:15 doc/FirstSteps/Java/HelloMaxDB.java
    STDOUT: extracting: -rw-rr         1959 2008-08-15 19:51:15 doc/FirstSteps/Java/HowToJava.html
    STDOUT: extracting: -rw-rr         1305 2008-08-15 19:51:15 doc/FirstSteps/Java/StateMaxDB.class
    STDOUT: extracting: -rw-rr         1064 2008-08-15 19:51:15 doc/FirstSteps/Java/StateMaxDB.java
    STDOUT: extracting: -rw-rr          227 2008-08-15 19:51:15 doc/FirstSteps/maxdbenv.cmd
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:18 doc/FirstSteps/ODBC/
    STDOUT: extracting: -rw-rr         4510 2008-08-15 19:51:15 doc/FirstSteps/ODBC/HelloMaxDB.c
    STDOUT: extracting: -rw-rr         1293 2008-08-15 19:51:15 doc/FirstSteps/ODBC/HowToODBC.html
    STDOUT: extracting: -rw-rr          393 2008-08-15 19:51:15 doc/FirstSteps/ODBC/Makefile
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:18 doc/FirstSteps/Perl/
    STDOUT: extracting: -rw-rr          973 2008-08-15 19:51:15 doc/FirstSteps/Perl/demodbData.pm
    STDOUT: extracting: -rw-rr         1894 2008-08-15 19:51:15 doc/FirstSteps/Perl/HowToPerl.html
    STDOUT: extracting: -rwxr-xr-x          960 2008-08-15 19:51:15 doc/FirstSteps/Perl/StateMaxDB.pl
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:19 doc/FirstSteps/Python/
    STDOUT: extracting: -rw-rr          871 2008-08-15 19:51:15 doc/FirstSteps/Python/demodbData.py
    STDOUT: extracting: -rwxr-xr-x          859 2008-08-15 19:51:15 doc/FirstSteps/Python/HelloMaxDB-API.py
    STDOUT: extracting: -rwxr-xr-x          859 2008-08-15 19:51:15 doc/FirstSteps/Python/HelloMaxDB.py
    STDOUT: extracting: -rw-rr         3043 2008-08-15 19:51:15 doc/FirstSteps/Python/HowToPython.html
    STDOUT: extracting: -rwxr-xr-x          865 2008-08-15 19:51:15 doc/FirstSteps/Python/StateMaxDB.py
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:20 doc/FirstSteps/SQLDBC/
    STDOUT: extracting: -rw-rr         3522 2008-08-15 19:51:15 doc/FirstSteps/SQLDBC/HelloMaxDB.cpp
    STDOUT: extracting: -rw-rr         1329 2008-08-15 19:51:15 doc/FirstSteps/SQLDBC/HowToSQLDBC.html
    STDOUT: extracting: -rw-rr          563 2008-08-15 19:51:15 doc/FirstSteps/SQLDBC/Makefile
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:10 env/
    STDOUT: extracting: -rwxr-xr-x         6260 2008-08-15 21:53:37 env/APPS.py
    STDOUT: extracting: -rw-rr         3800 2008-08-15 21:53:37 env/CNR3DATA.py
    STDOUT: extracting: -rw-rr         8216 2008-08-15 21:53:37 env/CNR3TAB.py
    STDOUT: extracting: -rw-rr       201779 2008-08-15 22:02:13 env/cserv.pcf
    STDOUT: extracting: -rw-rr         1861 2008-08-15 21:53:37 env/DBANA.py
    STDOUT: extracting: -rw-rr        17874 2008-08-15 21:53:39 env/DBMVIEWS.py
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:08 env/en/
    STDOUT: extracting: -rw-rr         7609 2008-08-15 22:02:13 env/en/DBM.en
    STDOUT: extracting: -rw-rr        15713 2008-08-15 21:53:39 env/GARBAGE.py
    STDOUT: extracting: -rw-rr          249 2008-08-15 22:02:13 env/general.use
    STDOUT: extracting: -rwxr-xr-x         1304 2008-08-15 21:53:45 env/getpackages.py
    STDOUT: extracting: -rw-rr         1144 2008-08-15 21:53:39 env/INFO.py
    STDOUT: extracting: -rw-rr        14609 2008-08-15 21:53:45 env/installib.py
    STDOUT: extracting: -rw-rr        90473 2008-08-15 21:53:39 env/JDBC.py
    STDOUT: extracting: -rw-rr          396 2008-08-15 22:02:13 env/kernprot.use
    STDOUT: extracting: -rwxr-xr-x          949 2008-08-15 21:53:45 env/lapps.py
    STDOUT: extracting: -rw-rr         8269 2008-08-15 19:51:15 env/lsystab.py
    STDOUT: extracting: -rw-rr        19514 2008-08-15 21:53:39 env/ODBC.py
    STDOUT: extracting: -rw-rr         1241 2008-08-15 21:53:39 env/ORADD.py
    STDOUT: extracting: -rw-rr       266421 2008-08-15 21:53:41 env/ORADDCOM.py
    STDOUT: extracting: -rw-rr         9586 2008-08-15 21:53:41 env/ORADDSYN.py
    STDOUT: extracting: -rw-rr       158400 2008-08-15 21:53:41 env/ORADDV.py
    STDOUT: extracting: -rw-rr         1400 2008-08-15 21:53:41 env/PRECOM.py
    STDOUT: extracting: -rw-rr        50345 2008-08-15 21:53:45 env/REPOSITORY.py
    STDOUT: extracting: -rw-rr        61439 2008-08-15 21:53:39 env/SAPDBLOADER.py
    STDOUT: extracting: -rw-rr         4483 2008-08-15 21:53:41 env/SHOWCMD.py
    STDOUT: extracting: -rw-rr        49869 2008-08-15 21:53:41 env/SQLDBC.py
    STDOUT: extracting: -rw-rr        48352 2008-08-15 21:53:41 env/SYSDBA.py
    STDOUT: extracting: -rw-rr        59678 2008-08-15 21:53:43 env/SYSDBACOM.py
    STDOUT: extracting: -rw-rr        16770 2008-08-15 21:53:43 env/SYSINFO.py
    STDOUT: extracting: -rw-rr       114665 2008-08-15 21:53:43 env/SYSINFOCOM.py
    STDOUT: extracting: -rw-rr        17793 2008-08-15 21:53:43 env/TRIGGER.py
    STDOUT: extracting: -rw-rr         3203 2008-08-15 21:53:43 env/UDE.py
    STDOUT: extracting: -rw-rr         6596 2008-08-15 21:53:45 env/WA.py
    STDOUT: extracting: -rw-rr        54914 2008-08-15 21:53:43 env/XDD.py
    STDOUT: extracting: -rw-rr       106448 2008-08-15 21:53:43 env/XDDCOM.py
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:11 lib/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:11 lib/python2.3/
    STDOUT: extracting: -rw-rr         6867 2008-08-15 19:51:15 lib/python2.3/optlib.py
    STDOUT: extracting: -rwxr-xr-x       135234 2008-08-15 19:51:15 lib/python2.3/pyexpat.pyd
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:11 lib/python2.3/sdb/
    STDOUT: extracting: -rw-rr        14852 2008-08-15 19:51:15 lib/python2.3/sdb/dbapi.py
    STDOUT: extracting: -rwxr-xr-x       507904 2008-08-15 21:54:03 lib/python2.3/sdb/dbm.pyd
    STDOUT: extracting: -rwxr-xr-x       487424 2008-08-15 21:54:07 lib/python2.3/sdb/loader.pyd
    STDOUT: extracting: -rwxr-xr-x       475136 2008-08-15 21:54:15 lib/python2.3/sdb/sql.pyd
    STDOUT: extracting: -rw-rr          208 2008-08-15 19:51:15 lib/python2.3/sdb/__init__.py
    STDOUT: extracting: -rwxr-xr-x        61503 2008-08-15 19:51:15 lib/python2.3/zlib.pyd
    STDOUT: extracting: -rwxr-xr-x        49218 2008-08-15 19:51:15 lib/python2.3/_socket.pyd
    STDOUT: extracting: -rwxr-xr-x        57407 2008-08-15 19:51:15 lib/python2.3/_sre.pyd
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:11 misc/
    STDOUT: extracting: -rw-rr         2437 2008-08-16 00:38:45 misc/create_demo_db.cmd
    STDOUT: extracting: -rw-rr          417 2008-08-16 00:38:45 misc/drop_demo_db.cmd
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:17 pgm/
    STDOUT: extracting: -rwxr-xr-x       200704 2008-08-15 21:52:15 pgm/backup.exe
    STDOUT: extracting: -rwxr-xr-x       380928 2008-08-15 20:10:53 pgm/cons.exe
    STDOUT: extracting: -rwxr-xr-x        45056 2008-08-15 20:10:33 pgm/cr_param.exe
    STDOUT: extracting: -rwxr-xr-x       940032 2008-08-15 19:51:15 pgm/dbghelp.dll
    STDOUT: extracting: -rwxr-xr-x       299008 2008-08-15 21:49:01 pgm/dbmreg.exe
    STDOUT: extracting: -rwxr-xr-x       454656 2008-08-15 21:49:37 pgm/dbmshm.exe
    STDOUT: extracting: -rwxr-xr-x      2105344 2008-08-15 21:48:31 pgm/dbmsrv.exe
    STDOUT: extracting: -rwxr-xr-x      1843200 2008-08-15 21:49:17 pgm/dbmsrvscd.exe
    STDOUT: extracting: -rwxr-xr-x       299008 2008-08-15 21:48:49 pgm/dbmstart.exe
    STDOUT: extracting: -rwxr-xr-x       299008 2008-08-15 21:48:53 pgm/dbmstop.exe
    STDOUT: extracting: -rwxr-xr-x       299008 2008-08-15 21:49:05 pgm/dbmunreg.exe
    STDOUT: extracting: -rwxr-xr-x        69632 2008-08-16 00:15:35 pgm/dbpinstall.dll
    STDOUT: extracting: -rwxr-xr-x      1073152 2008-08-15 20:33:23 pgm/diagnose.exe
    STDOUT: extracting: -rwxr-xr-x      7258112 2008-08-15 21:48:17 pgm/kernel.exe
    STDOUT: extracting: -rwxr-xr-x       118784 2008-08-15 20:25:15 pgm/libhsscopy.dll
    STDOUT: extracting: -rwxr-xr-x      1204224 2008-08-16 00:11:25 pgm/liboms.dll
    STDOUT: extracting: -rwxr-xr-x       159744 2008-08-16 00:16:23 pgm/libsqlcls.dll
    STDOUT: extracting: -rwxr-xr-x      1191936 2008-08-16 00:17:23 pgm/libSQLDBC.dll
    STDOUT: extracting: -rwxr-xr-x      1269760 2008-08-16 00:20:23 pgm/libSQLDBC_C.dll
    STDOUT: extracting: -rwxr-xr-x      3022848 2008-08-15 22:01:27 pgm/lserver.exe
    STDOUT: extracting: -rwxr-xr-x        20545 2008-08-15 19:51:15 pgm/pysapdb.exe
    STDOUT: extracting: -rwxr-xr-x       974915 2008-08-15 19:51:15 pgm/python23.dll
    STDOUT: extracting: -rw-rr      2071185 2008-08-15 19:51:15 pgm/python23.zip
    STDOUT: extracting: -rwxr-xr-x        45056 2008-08-15 20:10:31 pgm/renparam.exe
    STDOUT: extracting: -rwxr-xr-x       294912 2008-08-15 20:11:51 pgm/service.exe
    STDOUT: extracting: -rwxr-xr-x       417792 2008-08-15 20:11:55 pgm/sqlinst.dll
    STDOUT: extracting: -rwxr-xr-x      1359872 2008-08-15 20:11:59 pgm/sqlmsg.dll
    STDOUT: extracting: -rwxr-xr-x       319488 2008-08-15 20:11:01 pgm/stop.exe
    STDOUT: extracting: -rwxr-xr-x       319488 2008-08-15 20:10:57 pgm/strt.exe
    STDOUT: extracting: -rwxr-xr-x        98304 2008-08-15 22:11:33 pgm/StudioUtil.dll
    STDOUT: extracting: -rwxr-xr-x        49152 2008-08-15 20:25:11 pgm/sysrc.exe
    STDOUT: extracting: -rwxr-xr-x        73728 2008-08-15 20:11:57 pgm/systemrc.exe
    STDOUT: extracting: -rwxr-xr-x       229376 2008-08-15 22:11:43 pgm/TableDefC.dll
    STDOUT: extracting: -rwxr-xr-x        45056 2008-08-15 21:53:29 pgm/Tools_WinEvtLog.dll
    STDOUT: extracting: -rwxr-xr-x        73728 2008-08-15 22:01:47 pgm/tracesort.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:17 sap/
    STDOUT: extracting: -rw-rr          147 2008-08-15 19:51:15 sap/dbpinstall.lst
    STDOUT: extracting: -rw-rr          761 2008-08-15 21:50:29 sap/grantxdb.dbm
    STDOUT: extracting: -rwxr-xr-x        18192 2008-08-15 19:51:15 sap/lcinit.bat
    STDOUT: extracting: -rwxr-xr-x       126976 2008-08-16 00:15:27 sap/lvcbench.dll
    STDOUT: extracting: -rw-rr           89 2008-08-15 19:51:15 sap/saprfc.ini
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:44 pgm/
    STDOUT: extracting: -rwxr-xr-x     14577664 2008-08-15 23:36:03 pgm/slowknl.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:45 Support/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:00:57 Support/Mapfiles/
    STDOUT: extracting: -rw-rr       505962 2008-08-15 21:51:00 Support/Mapfiles/backint.map
    STDOUT: extracting: -rw-rr       661472 2008-08-15 20:10:53 Support/Mapfiles/cons.map
    STDOUT: extracting: -rw-rr       121797 2008-08-15 20:10:32 Support/Mapfiles/cr_param.map
    STDOUT: extracting: -rw-rr      1265024 2008-08-15 21:53:13 Support/Mapfiles/dbmevtdisp.map
    STDOUT: extracting: -rw-rr       913124 2008-08-15 21:53:26 Support/Mapfiles/dbmevthndl_display.map
    STDOUT: extracting: -rw-rr       918119 2008-08-15 21:53:36 Support/Mapfiles/dbmevthndl_winlog.map
    STDOUT: extracting: -rw-rr       802618 2008-08-15 21:49:36 Support/Mapfiles/dbmshm.map
    STDOUT: extracting: -rw-rr      3115022 2008-08-15 20:24:12 Support/Mapfiles/dbmsrv-clu.map
    STDOUT: extracting: -rw-rr      3049582 2008-08-15 21:48:31 Support/Mapfiles/dbmsrv.map
    STDOUT: extracting: -rw-rr      2607026 2008-08-15 21:49:16 Support/Mapfiles/dbmsrvscd.map
    STDOUT: extracting: -rw-rr        78229 2008-08-16 00:15:35 Support/Mapfiles/dbpinstall.map
    STDOUT: extracting: -rw-rr      1937316 2008-08-15 20:33:22 Support/Mapfiles/diagnose.map
    STDOUT: extracting: -rw-rr       155915 2008-08-15 20:10:31 Support/Mapfiles/get_page.map
    STDOUT: extracting: -rw-rr     11970292 2008-08-15 21:48:16 Support/Mapfiles/kernel.map
    STDOUT: extracting: -rw-rr       191857 2008-08-15 20:25:15 Support/Mapfiles/libhsscopy.map
    STDOUT: extracting: -rw-rr      2152785 2008-08-16 00:11:24 Support/Mapfiles/liboms.map
    STDOUT: extracting: -rw-rr       259698 2008-08-16 00:16:22 Support/Mapfiles/libsqlcls.map
    STDOUT: extracting: -rw-rr      1983758 2008-08-16 00:17:23 Support/Mapfiles/libSQLDBC.map
    STDOUT: extracting: -rw-rr      2270630 2008-08-16 00:20:22 Support/Mapfiles/libSQLDBC_C.map
    STDOUT: extracting: -rw-rr      3030264 2008-08-15 22:01:26 Support/Mapfiles/lserver.map
    STDOUT: extracting: -rw-rr       241759 2008-08-16 00:15:26 Support/Mapfiles/lvcbench.map
    STDOUT: extracting: -rw-rr        22799 2008-08-15 19:51:40 Support/Mapfiles/odbcreg.map
    STDOUT: extracting: -rw-rr       437361 2008-08-15 21:52:10 Support/Mapfiles/pipe2file.map
    STDOUT: extracting: -rw-rr       170094 2008-08-15 20:12:32 Support/Mapfiles/sapdbmscsex.map
    STDOUT: extracting: -rw-rr       260595 2008-08-15 20:12:42 Support/Mapfiles/sapdbmscsman.map
    STDOUT: extracting: -rw-rr       130593 2008-08-15 20:12:01 Support/Mapfiles/sapdbmscsres.map
    STDOUT: extracting: -rw-rr       864387 2008-08-15 20:12:55 Support/Mapfiles/serv-clu.map
    STDOUT: extracting: -rw-rr       573796 2008-08-15 20:12:57 Support/Mapfiles/service-clu.map
    STDOUT: extracting: -rw-rr       545676 2008-08-15 20:11:50 Support/Mapfiles/service.map
    STDOUT: extracting: -rw-rr     15115432 2008-08-15 23:36:03 Support/Mapfiles/slowknl.map
    STDOUT: extracting: -rw-rr       674679 2008-08-15 20:11:54 Support/Mapfiles/sqlinst.map
    STDOUT: extracting: -rw-rr       138012 2008-08-15 19:55:01 Support/Mapfiles/sqlver.map
    STDOUT: extracting: -rw-rr       137724 2008-08-15 19:55:00 Support/Mapfiles/sqlwhat.map
    STDOUT: extracting: -rw-rr       100215 2008-08-16 00:05:33 Support/Mapfiles/sql_run.map
    STDOUT: extracting: -rw-rr       126593 2008-08-15 20:25:11 Support/Mapfiles/sysrc.map
    STDOUT: extracting: -rw-rr       205806 2008-08-15 20:11:57 Support/Mapfiles/systemrc.map
    STDOUT: extracting: -rw-rr       329621 2008-08-15 22:11:43 Support/Mapfiles/TableDefC.map
    STDOUT: extracting: -rw-rr       180003 2008-08-15 22:01:47 Support/Mapfiles/tracesort.map
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:01:45 symbols/
    STDOUT: extracting: -rw-rr      1199104 2008-08-15 21:51:00 symbols/backint.pdb
    STDOUT: extracting: -rw-rr      2092032 2008-08-15 20:10:53 symbols/cons.pdb
    STDOUT: extracting: -rw-rr       281600 2008-08-15 20:10:32 symbols/cr_param.pdb
    STDOUT: extracting: -rw-rr      3836928 2008-08-15 21:53:13 symbols/dbmevtdisp.pdb
    STDOUT: extracting: -rw-rr      3058688 2008-08-15 21:53:26 symbols/dbmevthndl_display.pdb
    STDOUT: extracting: -rw-rr      3083264 2008-08-15 21:53:36 symbols/dbmevthndl_winlog.pdb
    STDOUT: extracting: -rw-rr      2485248 2008-08-15 21:49:36 symbols/dbmshm.pdb
    STDOUT: extracting: -rw-rr      8563712 2008-08-15 20:24:12 symbols/dbmsrv-clu.pdb
    STDOUT: extracting: -rw-rr      8391680 2008-08-15 21:48:30 symbols/dbmsrv.pdb
    STDOUT: extracting: -rw-rr      7703552 2008-08-15 21:49:15 symbols/dbmsrvscd.pdb
    STDOUT: extracting: -rw-rr       420864 2008-08-16 00:15:35 symbols/dbpinstall.pdb
    STDOUT: extracting: -rw-rr      4803584 2008-08-15 20:33:21 symbols/diagnose.pdb
    STDOUT: extracting: -rw-rr       338944 2008-08-15 20:10:31 symbols/get_page.pdb
    STDOUT: extracting: -rw-rr     36047872 2008-08-15 21:48:12 symbols/kernel.pdb
    STDOUT: extracting: -rw-rr       470016 2008-08-15 20:25:15 symbols/libhsscopy.pdb
    STDOUT: extracting: -rw-rr      5868544 2008-08-16 00:11:24 symbols/liboms.pdb
    STDOUT: extracting: -rw-rr      1264640 2008-08-16 00:16:21 symbols/libsqlcls.pdb
    STDOUT: extracting: -rw-rr      4713472 2008-08-16 00:17:22 symbols/libSQLDBC.pdb
    STDOUT: extracting: -rw-rr      5180416 2008-08-16 00:20:21 symbols/libSQLDBC_C.pdb
    STDOUT: extracting: -rw-rr      7171072 2008-08-15 22:01:25 symbols/lserver.pdb
    STDOUT: extracting: -rw-rr       642048 2008-08-16 00:15:26 symbols/lvcbench.pdb
    STDOUT: extracting: -rw-rr      1207296 2008-08-15 21:52:10 symbols/pipe2file.pdb
    STDOUT: extracting: -rw-rr      3058688 2008-08-15 20:12:32 symbols/sapdbmscsex.pdb
    STDOUT: extracting: -rw-rr      1002496 2008-08-15 20:12:42 symbols/sapdbmscsman.pdb
    STDOUT: extracting: -rw-rr       330752 2008-08-15 20:12:01 symbols/sapdbmscsres.pdb
    STDOUT: extracting: -rw-rr      2739200 2008-08-15 20:12:55 symbols/serv-clu.pdb
    STDOUT: extracting: -rw-rr      2141184 2008-08-15 20:12:56 symbols/service-clu.pdb
    STDOUT: extracting: -rw-rr      1944576 2008-08-15 20:11:50 symbols/service.pdb
    STDOUT: extracting: -rw-rr     40643584 2008-08-15 23:35:57 symbols/slowknl.pdb
    STDOUT: extracting: -rw-rr      2321408 2008-08-15 20:11:54 symbols/sqlinst.pdb
    STDOUT: extracting: -rw-rr      2075648 2008-08-16 00:05:31 symbols/sqlrun.pdb
    STDOUT: extracting: -rw-rr       306176 2008-08-15 19:55:01 symbols/sqlver.pdb
    STDOUT: extracting: -rw-rr       306176 2008-08-15 19:55:00 symbols/sqlwhat.pdb
    STDOUT: extracting: -rw-rr       248832 2008-08-16 00:05:33 symbols/sql_run.pdb
    STDOUT: extracting: -rw-rr      2214912 2008-08-15 20:12:51 symbols/start-clu.pdb
    STDOUT: extracting: -rw-rr      2206720 2008-08-15 20:12:52 symbols/stop-clu.pdb
    STDOUT: extracting: -rw-rr       306176 2008-08-15 20:25:10 symbols/sysrc.pdb
    STDOUT: extracting: -rw-rr       388096 2008-08-15 20:11:57 symbols/systemrc.pdb
    STDOUT: extracting: -rw-rr       846848 2008-08-15 22:11:43 symbols/TableDefC.pdb
    STDOUT: extracting: -rw-rr       887808 2008-08-15 22:01:47 symbols/tracesort.pdb
    STDOUT: checking unpacked archive... MSG: check file "Support/Mapfiles/diagnose.map": ok
    MSG: check file "doc/FirstSteps/ODBC/HowToODBC.html": ok
    MSG: check file "lib/python2.3/_socket.pyd": ok
    MSG: check file "Support/Mapfiles/get_page.map": ok
    MSG: check file "pgm/dbmsrv.exe": ok
    MSG: check file "env/INFO.py": ok
    MSG: check file "symbols/dbmsrv-clu.pdb": ok
    MSG: check file "pgm/diagnose.exe": ok
    MSG: check file "symbols/cons.pdb": ok
    MSG: check file "misc/create_demo_db.cmd": ok
    MSG: check file "symbols/sapdbmscsres.pdb": ok
    MSG: check file "symbols/cr_param.pdb": ok
    MSG: check file "Support/Mapfiles/dbpinstall.map": ok
    MSG: check file "lib/python2.3/sdb/__init__.py": ok
    MSG: check file "symbols/dbmevthndl_winlog.pdb": ok
    MSG: check file "symbols/libSQLDBC_C.pdb": ok
    MSG: check file "bin/xtracesort.exe": ok
    MSG: check file "bin/x_diagnose.exe": ok
    MSG: check file "symbols/pipe2file.pdb": ok
    MSG: check file "pgm/Tools_WinEvtLog.dll": ok
    MSG: check file "symbols/dbmshm.pdb": ok
    MSG: check file "pgm/cons.exe": ok
    MSG: check file "sap/grantxdb.dbm": ok
    MSG: check file "demo/tutoriallib.py": ok
    MSG: check file "demo/HOTEL.py": ok
    MSG: check file "symbols/liboms.pdb": ok
    MSG: check file "env/cserv.pcf": ok
    MSG: check file "Support/Mapfiles/TableDefC.map": ok
    MSG: check file "lib/python2.3/_sre.pyd": ok
    MSG: check file "pgm/service.exe": ok
    MSG: check file "doc/FirstSteps/Python/HowToPython.html": ok
    MSG: check file "doc/FirstSteps/ODBC/HelloMaxDB.c": ok
    MSG: check file "Support/Mapfiles/libSQLDBC.map": ok
    MSG: check file "doc/FirstSteps/Java/DemodbData.java": ok
    MSG: check file "sap/saprfc.ini": ok
    MSG: check file "pgm/dbghelp.dll": ok
    MSG: check file "cluster/strt_clu.exe": ok
    MSG: check file "symbols/libhsscopy.pdb": ok
    MSG: check file "symbols/dbmsrv.pdb": ok
    MSG: check file "symbols/sapdbmscsman.pdb": ok
    MSG: check file "cluster/SAPDBMSCSMan.exe": ok
    MSG: check file "pgm/tracesort.exe": ok
    MSG: check file "Support/Mapfiles/sqlinst.map": ok
    MSG: check file "bin/sqlwhat.exe": ok
    MSG: check file "lib/python2.3/pyexpat.pyd": ok
    MSG: check file "pgm/libSQLDBC_C.dll": ok
    MSG: check file "Support/Mapfiles/sapdbmscsman.map": ok
    MSG: check file "Support/Mapfiles/sapdbmscsres.map": ok
    MSG: check file "Support/Mapfiles/dbmevthndl_winlog.map": ok
    MSG: check file "bin/x_python.exe": ok
    MSG: check file "symbols/sql_run.pdb": ok
    MSG: check file "pgm/python23.dll": ok
    MSG: check file "env/SQLDBC.py": ok
    MSG: check file "symbols/tracesort.pdb": ok
    MSG: check file "cluster/SAPDBMSCSRes.dll": ok
    MSG: check file "cluster/stop_clu.exe": ok
    MSG: check file "pgm/sqlinst.dll": ok
    MSG: check file "pgm/StudioUtil.dll": ok
    MSG: check file "Support/Mapfiles/slowknl.map": ok
    MSG: check file "doc/FirstSteps/Python/HelloMaxDB.py": ok
    MSG: check file "symbols/lserver.pdb": ok
    MSG: check file "Support/Mapfiles/serv-clu.map": ok
    MSG: check file "pgm/cr_param.exe": ok
    MSG: check file "bin/backint.exe": ok
    MSG: check file "bin/sqlrun.dll": ok
    MSG: check file "pgm/libSQLDBC.dll": ok
    MSG: check file "Support/Mapfiles/kernel.map": ok
    MSG: check file "symbols/kernel.pdb": ok
    MSG: check file "bin/dbmsrvctl.exe": ok
    MSG: check file "env/UDE.py": ok
    MSG: check file "symbols/dbmsrvscd.pdb": ok
    MSG: check file "symbols/sqlinst.pdb": ok
    MSG: check file "doc/FirstSteps/Java/DemodbData.class": ok
    MSG: check file "env/lsystab.py": ok
    MSG: check file "sap/lcinit.bat": ok
    MSG: check file "lib/python2.3/zlib.pyd": ok
    MSG: check file "doc/FirstSteps/Perl/StateMaxDB.pl": ok
    MSG: check file "pgm/python23.zip": ok
    MSG: check file "doc/FirstSteps/Java/HelloMaxDB.class": ok
    MSG: check file "symbols/dbmevtdisp.pdb": ok
    MSG: check file "env/installib.py": ok
    MSG: check file "pgm/renparam.exe": ok
    MSG: check file "doc/FirstSteps/Python/StateMaxDB.py": ok
    MSG: check file "env/TRIGGER.py": ok
    MSG: check file "pgm/libhsscopy.dll": ok
    MSG: check file "symbols/serv-clu.pdb": ok
    MSG: check file "pgm/systemrc.exe": ok
    MSG: check file "pgm/dbmunreg.exe": ok
    MSG: check file "Support/Mapfiles/sysrc.map": ok
    MSG: check file "Support/Mapfiles/libhsscopy.map": ok
    MSG: check file "bin/dbmevtdisp.exe": ok
    MSG: check file "doc/FirstSteps/ODBC/Makefile": ok
    MSG: check file "Support/Mapfiles/dbmsrv-clu.map": ok
    MSG: check file "pgm/stop.exe": ok
    MSG: check file "Support/Mapfiles/service-clu.map": ok
    MSG: check file "Support/Mapfiles/lserver.map": ok
    MSG: check file "Support/Mapfiles/libsqlcls.map": ok
    MSG: check file "symbols/backint.pdb": ok
    MSG: check file "Support/Mapfiles/systemrc.map": ok
    MSG: check file "symbols/get_page.pdb": ok
    MSG: check file "lib/python2.3/sdb/sql.pyd": ok
    MSG: check file "Support/Mapfiles/dbmsrv.map": ok
    MSG: check file "env/APPS.py": ok
    MSG: check file "env/kernprot.use": ok
    MSG: check file "Support/Mapfiles/lvcbench.map": ok
    MSG: check file "symbols/systemrc.pdb": ok
    MSG: check file "symbols/sqlver.pdb": ok
    MSG: check file "pgm/liboms.dll": ok
    MSG: check file "cluster/service_clu.exe": ok
    MSG: check file "env/ORADDSYN.py": ok
    MSG: check file "Support/Mapfiles/backint.map": ok
    MSG: check file "env/SYSINFOCOM.py": ok
    MSG: check file "Support/Mapfiles/dbmevthndl_display.map": ok
    MSG: check file "cluster/SAPDBMSCSEx.dll": ok
    MSG: check file "pgm/slowknl.exe": ok
    MSG: check file "symbols/slowknl.pdb": ok
    MSG: check file "symbols/sqlwhat.pdb": ok
    MSG: check file "symbols/TableDefC.pdb": ok
    MSG: check file "doc/FirstSteps/SQLDBC/HelloMaxDB.cpp": ok
    MSG: check file "env/CNR3DATA.py": ok
    MSG: check file "doc/FirstSteps/index.html": ok
    MSG: check file "doc/FirstSteps/Java/HowToJava.html": ok
    MSG: check file "bin/pipe2file.exe": ok
    MSG: check file "doc/FirstSteps/Perl/demodbData.pm": ok
    MSG: check file "bin/dbmevthndl_winlog.exe": ok
    MSG: check file "Support/Mapfiles/tracesort.map": ok
    MSG: check file "symbols/lvcbench.pdb": ok
    MSG: check file "demo/ltutorial.py": ok
    MSG: check file "symbols/sapdbmscsex.pdb": ok
    MSG: check file "bin/xservice.exe": ok
    MSG: check file "doc/FirstSteps/Python/HelloMaxDB-API.py": ok
    MSG: check file "symbols/libSQLDBC.pdb": ok
    MSG: check file "env/REPOSITORY.py": ok
    MSG: check file "Support/Mapfiles/cr_param.map": ok
    MSG: check file "lib/python2.3/optlib.py": ok
    MSG: check file "cluster/serv_clu.exe": ok
    MSG: check file "symbols/sysrc.pdb": ok
    MSG: check file "env/ORADDCOM.py": ok
    MSG: check file "doc/FirstSteps/SQLDBC/Makefile": ok
    MSG: check file "pgm/dbmsrvscd.exe": ok
    MSG: check file "symbols/diagnose.pdb": ok
    MSG: check file "pgm/TableDefC.dll": ok
    MSG: check file "doc/FirstSteps/Perl/HowToPerl.html": ok
    MSG: check file "Support/Mapfiles/sqlwhat.map": ok
    MSG: check file "symbols/stop-clu.pdb": ok
    MSG: check file "cluster/dbmsrv_clu.exe": ok
    MSG: check file "pgm/sysrc.exe": ok
    MSG: check file "pgm/kernel.exe": ok
    MSG: check file "Support/Mapfiles/sql_run.map": ok
    MSG: check file "doc/FirstSteps/Java/StateMaxDB.class": ok
    MSG: check file "Support/Mapfiles/dbmsrvscd.map": ok
    MSG: check file "symbols/service-clu.pdb": ok
    MSG: check file "symbols/dbmevthndl_display.pdb": ok
    MSG: check file "Support/Mapfiles/odbcreg.map": ok
    MSG: check file "env/SAPDBLOADER.py": ok
    MSG: check file "bin/sqlver.exe": ok
    MSG: check file "env/general.use": ok
    MSG: check file "sap/dbpinstall.lst": ok
    MSG: check file "pgm/dbpinstall.dll": ok
    MSG: check file "doc/FirstSteps/Java/StateMaxDB.java": ok
    MSG: check file "env/en/DBM.en": ok
    MSG: check file "sap/lvcbench.dll": ok
    MSG: check file "pgm/lserver.exe": ok
    MSG: check file "env/getpackages.py": ok
    MSG: check file "env/lapps.py": ok
    MSG: check file "Support/Mapfiles/dbmshm.map": ok
    MSG: check file "Support/Mapfiles/service.map": ok
    MSG: check file "misc/drop_demo_db.cmd": ok
    MSG: check file "lib/python2.3/sdb/dbm.pyd": ok
    MSG: check file "env/WA.py": ok
    MSG: check file "symbols/dbpinstall.pdb": ok
    MSG: check file "bin/ireport.py": ok
    MSG: check file "Support/Mapfiles/sapdbmscsex.map": ok
    MSG: check file "Support/Mapfiles/libSQLDBC_C.map": ok
    MSG: check file "Support/Mapfiles/liboms.map": ok
    MSG: check file "lib/python2.3/sdb/dbapi.py": ok
    MSG: check file "doc/FirstSteps/Java/HelloMaxDB.java": ok
    MSG: check file "env/ORADDV.py": ok
    MSG: check file "doc/FirstSteps/maxdbenv.cmd": ok
    MSG: check file "pgm/pysapdb.exe": ok
    MSG: check file "pgm/libsqlcls.dll": ok
    MSG: check file "env/GARBAGE.py": ok
    MSG: check file "symbols/libsqlcls.pdb": ok
    MSG: check file "bin/xkernprot.exe": ok
    MSG: check file "Support/Mapfiles/dbmevtdisp.map": ok
    MSG: check file "env/SYSINFO.py": ok
    MSG: check file "symbols/sqlrun.pdb": ok
    MSG: check file "env/XDDCOM.py": ok
    MSG: check file "bin/sdbfill.exe": ok
    MSG: check file "lib/python2.3/sdb/loader.pyd": ok
    MSG: check file "env/XDD.py": ok
    MSG: check file "doc/FirstSteps/SQLDBC/HowToSQLDBC.html": ok
    MSG: check file "pgm/backup.exe": ok
    MSG: check file "env/ODBC.py": ok
    MSG: check file "Support/Mapfiles/pipe2file.map": ok
    MSG: check file "Support/Mapfiles/cons.map": ok
    MSG: check file "pgm/dbmshm.exe": ok
    MSG: check file "env/SYSDBA.py": ok
    MSG: check file "env/CNR3TAB.py": ok
    MSG: check file "env/ORADD.py": ok
    MSG: check file "env/PRECOM.py": ok
    MSG: check file "pgm/strt.exe": ok
    MSG: check file "cluster/sapdbmscsman.dll": ok
    MSG: check file "Support/Mapfiles/sqlver.map": ok
    MSG: check file "env/DBANA.py": ok
    MSG: check file "env/SHOWCMD.py": ok
    MSG: check file "pgm/dbmstop.exe": ok
    MSG: check file "env/SYSDBACOM.py": ok
    MSG: check file "symbols/start-clu.pdb": ok
    MSG: check file "bin/dbmevthndl_display.exe": ok
    MSG: check file "doc/FirstSteps/Python/demodbData.py": ok
    MSG: check file "pgm/dbmstart.exe": ok
    MSG: check file "env/DBMVIEWS.py": ok
    MSG: check file "env/JDBC.py": ok
    MSG: check file "pgm/sqlmsg.dll": ok
    MSG: check file "pgm/dbmreg.exe": ok
    MSG: check file "symbols/service.pdb": ok
    STDOUT: ok
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/index.html" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/Perl/HowToPerl.html" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/Python/HowToPython.html" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/ODBC/HowToODBC.html" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/Java/HowToJava.html" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/misc/create_demo_db.cmd" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/misc/drop_demo_db.cmd" modified by installer
    MSG: file "c:/program files/sdb/maxdb1/doc/FirstSteps/maxdbenv.cmd" modified by installer
    SYS: "C:Program FilessdbMAXDB1 indbmsrvctl.exe" start
    SYS: "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": ERR
    SYS: "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": -24913,ERR_SERVICEDB: Cannot register service database instance for C:Program FilesSDBMAXDB1
    STDERR: error occured while executing "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1"
    STDERR: "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": ERR
    "C:Program Filessdbprogramspgmdbmcli.exe" -R "C:Program FilessdbMAXDB1" inst_reg -k "C:Program FilessdbMAXDB1": -24913,ERR_SERVICEDB: Cannot register service database instance for C:Program FilesSDBMAXDB1
    STDERR: installation exited abnormally  at Fr, Jan 09, 2009 at 18:17:25
    MSG: packagedata of package Redist Python changed
    MSG: writing 4 packages
    MSG: net install registry size = 40263 bytes
    MSG: wrote install registry (46259 bytes)
    STDOUT: start real extraction of "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/Max31.tmp/SDBRDPY.TGZ"
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:04:43 bin/
    STDOUT: extracting: -rwxr-xr-x       331776 2008-08-15 21:53:55 bin/x_python.exe
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:04:43 lib/
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:04:44 lib/python2.3/
    STDOUT: extracting: -rw-rr         6867 2008-08-15 19:51:15 lib/python2.3/optlib.py
    STDOUT: extracting: -rwxr-xr-x       135234 2008-08-15 19:51:15 lib/python2.3/pyexpat.pyd
    STDOUT: extracting: drwxr-xr-x            0 2008-08-16 01:04:43 lib/python2.3/sdb/
    STDOUT: extracting: -rwxr-xr-x       507904 2008-08-15 21:54:03 lib/python2.3/sdb/dbm.pyd
    STDOUT: extracti

    HI there,
    it really does look like as the "uninstallation" was done by merely deleting files from the filesystem.
    This will always lead to problems when you try to re-install a MaxDB afterwards.
    Uninstallations should be done via SDBUNIST to avoid such issues.
    Based on the error messages like:
    getRelease():C:/Program Files/SDB/MAXDB1/pgm/kernel.exe not found
    MSG: migrate server installation data for INSTROOT "c:/program files/sdb/maxdb1"
    MSG: installed package is flaged as invalid => skipping update check
    WRN: cannot execute command: xregcomp -u "c:program filessdbmaxdb1pgmdbpinstall": cannot create process, Le fichier spÈcifiÈ est introuvable.
    >WRN: cannot execute command: xregcomp -u "c:program filessdbprogramsliblivecachedbg": cannot create process, Le fichier spÈcifiÈ est introuvable.
    we can tell: the MaxDB installation registration had not been deleted correctly.
    If I'd to guess, I'd say you just deleted whatever was in the folder "c:program filessdb" and crossed fingers that this would do.
    Anyhow, on this system, due to the usage of non-SAP-standard folder layout check this one, the installation registration can by found in the all users data folder:
    >MSG: Template set indep data path to "c:/documents and settings/all users/application data/sdb/data"
    This would have to be removed as well.
    Anyhow, maybe you want to read the documentation before messing up your system by try and error:
    Installation Manual
    regards,
    Lars

  • Error during installation of SAP on win 2003 Server

    Hello All,
    I am trying to install SAP 4.6 on win 2003 server. The process of installation has completed for almost more than 9 hours. I am getting an error during "Database post processing". When I clicked "retry" the installation has stopped and restarted the system. I tried to start the SAP server which turns from Yellow to green. In my case, it turns to yellow and cannot proceed further.
    Also, is it necessary to stop the Oracle services till the end of the installtion?
    In addition, please send me Installation guide for the same to my mailid:
    [email protected]
    Please do let me know your inputs on how to resolve the issue.
    Thanks in advance.
    Regards
    Noor Basha

    -> which database are you on?
    -> sap 4.6 is rather old...think about installing supported releases such as 4.7 or erp2004/2005
    -> what were your guides/notes you referred to during the installation?
    GreetZ, AH

  • Oracle 8.1.6 On Win'2000 Server 5.00.2195 SP1

    I tryed to Installed Oracle 8.1.6 On Win'2000 Server 5.00.2195 (Stardard Edition) SP1....The Moment I clicked on Oracle Universal Installers mail page "Install" the page closes down and the next page never comes...
    Please Help !!!!!

    Hi,
    I don't have a suggestion, but I can say that I am running fine with the exact same configuration. Win2k server, sp2 and Oracle 8.1.6.

  • LMS 3.2 on Win 2008 Server - Web Server Issue

    Hi,
    I just installed LMS 3.2 on Windows 2008 Server Standart X64 and the CiscoWorks Web Server service does not start (Apache service is down but Tomcat up).
    All other services seem to be correctly started even if this is quit long.
    When I try to manually start the Apache Service with "pdexec Apache", i got :
    ERROR:Get reply from server failed:
    ERROR: Daemon Manager startup in progress. Please wait.
    When the deamon is up, the second line disapeared but apache is still not responding and of course, the URL is unreachable.
    This is a HP Proliant Server with 12Go RAM, is there a maximal size for the paging file ?
    I did not modify TMP and TEMP variable, should I have done it before the installation ?
    it appears to be some service startup issue on win 2008, is there bug fix or work around ?
    pdshow attached
    Thanks for your help, this is quit urgent.
    Cedric.

    >>>  is there a maximal size for the paging file ?
    There's indeed a swap file issue with Win 2008. See the first reply in this thread for corrective action: https://supportforums.cisco.com/message/675893#675891
    Though it may not apply, because you've installed LMS 3.2 ok, since you seem to be aware of it, the TMP/TEMP variables do need to be shortened, as noted in this post: https://supportforums.cisco.com/message/677383#677383
    Is your Win 2008 Server running any Microsoft Service Packs? Because AFAIK Win 2008 SP2 is not yet supported, and no one seems to have any luck on it with LMS 3.2 yet.
    After LMS 3.2 is up and running, if you can't log in to the web GUI, you might be running into the CSCtb17186 bug, described in this post: https://supportforums.cisco.com/message/676256#676256

  • Error after upgrading from 10.2.0.1 to 10.2.0.2 on Win 2003 server

    Hi,
    I just upgrade oracle 10.2.0.1 on Win 2003 server(32-bit) to 10.2.0.2. The installation seemed to be successful. (no errors) utlrp.sql ran ok as well. However, when I tried to start the upgraded database, I got the following error:
    SQL> startup
    ORACLE instance started.
    Total System Global Area 293601280 bytes
    Fixed Size 1289064 bytes
    Variable Size 96470168 bytes
    Database Buffers 188743680 bytes
    Redo Buffers 7098368 bytes
    Database mounted.
    ORA-01092: ORACLE instance terminated. Disconnection forced
    Any ideas?
    Thank you very much for your help.

    Looks like, you have only upgraded Oracle Software from 10.2.0.1 to 10.2.0.2. After that, immediately you are trying to bring the DB up. In that case you will receive an error "ORA-01092: ORACLE instance terminated. Disconnection forced".
    Did you upgrade your 10.2.0.1 Database after the software upgrade? I mean did you execute the following steps.
    SQL> STARTUP UPGRADE;
    SQL> SPOOL patch.log
    SQL> @?/rdbms/admin/catupgrd.sql
    SQL> SPOOL OFF
    SQL> SHUTDOWN IMMEDIATE;
    SQL> STARTUP;
    SQL> @?/rdbms/admin/utlrp.sql
    If not please execute them, and also follow the README document of the patch carefully.
    Regards,
    Sabdar Syed,
    http://sabdarsyed.blogspot.com/

Maybe you are looking for

  • Flat File Upload as CSV File in BPS.

    Hi Friends, We have to upload CSV file to BPS and as of now we are able to upload tab spaced file as per the How to Document. Kindly can some body post the COMPLETE CODE changes for Uploading the CSV File in both LOAD and WEB Function Modules. For co

  • PLEASE CAN YOU TELL ME HOW TO GET PHOTOSHOP CC TO RECOGNISE MY PRINT PROFILES?

    Profile problem A question Adobe do not seem to be able to answer. Or rather they do not understand my problem. I am having a problem getting Colour profiles for my printing papers recognised by Photoshop CC in My Mac OSX10.10.1 Yosemite To put the p

  • Scanner input error

    I want to make a very simple program that allows the user to enter a key/character and have the corresponding unicode value returned. The problem is that I receive an error after the input of any character. Here is the code: import java.util.Scanner;

  • Should I see EJBs in JNDI tree?

    Should I be able to see my deployed EJBs in the JNDI tree of WLS6.1? I can see the session beans that I have deployed, but not my entity beans. Thanks, Malone

  • Oracle Designer Import - Missing Application Systems

    Hi, I'm tryiing to import an Oracle Designer data model into SQL Developer Data Model 3.0, which I downloaded today. I seem to have my connection to the Designer repository set up OK and I can select the non-versioned Workarea. When I click Next none