Win10 upgrade problem on LeNovo C50 30 All in One

I tried to upgrade my LeNovo C50 30 All in One, but got Microsoft message indicating incompatibility with NVIDIA GeForce 820A, though product was sold with free upgradeDownload on Lenovo website W10 upgrade for Intel and GeForce 820A but couldn't install them because of OS version Win 8.1.Could someone give me help on how to proceed.Thanks in advance

hi LordMichael091,
Welcome to the Lenovo Forums.
If you have the Lenovo® C225 (3079 or 3095) then this doesn't have a built-in bluetooth module as listed in this pdf data sheet. Otherwise, try to download Aida64 Extreme and post the bluetooth device here for us to verify the correct driver.
Here's a sample screenshot on how to identify a device using Aida64 Extreme:
Spoiler (Highlight to read)
Let me know your findings,
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

I want to upgrade my current desktop PC 1030cq all in one graphics card to 1gb

i want to upgrade my current desktop PC 1030cq all in one graphics card to 1gb

RS, welcome to the forum.
Which of these computers is yours? We need this information to answer your questions correctly.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Looking for 2GB of ram to upgrade my hp pav 20-b010z all in one

I am trying to find just 2GB of ram so I can upgrade my HP Pav 20-b010z all in one computer. My product # C1A32AV#ABA. It only came with 2 GB.
I have DDR3-1066MHz SODIMM Memory and Windows 8 64-bit. I only have one stick in the computer. I was told that I need to use PC3-12800. I'm pretty new to all of this.
Could someone please tell me what kind of ram I need to use that would be compatible with my computer. What brand too, please. If there is one by HP I would gladly like to use that.
Thank you for any help you can provide
This question was solved.
View Solution.

Hi:
Please take a look at the product specs for your PC at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03569440&tmp_task=prodinfoCategory&cc=us&dlc=en...
The PC3-12800 memory downclocks to 1066 MHz (PC3-8500).
You can install up to 16 GB of memory in your PC.
Why do things half measure? 4 GB is the minimum memory I would run a 64 bit OS on, and have it work acceptably.
I would just buy 2 x 8 GB of PC3-12800 memory and have all the memory you'll ever need, and get it now while it is cheap.
Here is a link to a place where you can get good PC3-12800 memory cheap.
I defaulted the search to PC3-12800. You can refine the search by clicking on the memory size, etc on the left side of the page.
Read the reviews and get what makes the most sense to you.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007609%20600000410&IsNodeId=1&name=DD...

Power up problems on my HP 7520 all in one printer

My HP 7520 e powered down whilst in the process of printing. when the power pack is disconnected from the printer and powered back up from the mains supply a green light shows on the actual power pack. when the power pack is connected to the printer the power fails immediately.

Hi , Welcome to the HP Forums! I noticed that you are having power up problems on your HP 7520 all in one printer. I am happy to look into this for you! Please try the steps within this guide, The HP Printer Does Not Turn On or Respond When the Power Button is Pressed. As it deals with power related issues. (Even though the guide title may not match your issue, I believe the solutions will help.) Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

Hi i have problems with my iMac g4 all in one

hi i have problems with my imac g4 all in one ive installed a airport card and its running fine but when i try to connect to my wirless router it connects but i still have no internet,it tells me it cannot find server,im with utility warehouse
has the airport card got its own secruity???????if so how can i disable it????or do i need a dongle??
or would it be best to get hold of utility warehouse
i have another mac running on it and my iphone and an android pad so the g4 is the only one thats not
please help some one as i would like to sell it to a friend who in need of a computer but needs it to be wireless
ty

Reset security questions
http://support.apple.com/kb/HT5312
If you do not have a Rescue email, you need to contact apple support, they will guide you through the process of resetting your security questions.
https://ssl.apple.com/emea/support/itunes/contact.html

LENOVO C SERIES ALL IN ONE DESKTOP PC

Hi...Im new to this site and just wanted to ask a question,
I bought a lenovo all in one c series pc..Only a few days ago,
I got it home and booted it up as you do,
Then it went to mircosoft updates and found 45 updates....So it downlosaded them and it went to reboot but all i got was a blank black screen with just the wireless light and the power light on...
Any ideas to what is happening ?....
Im from the UK if that helps
Rob

I have had the exact same problem and it is confirmed it is down to the Intel GMA 3150 update that Windows Update installs for you.
I recommend you print or write the following instructions down before doing them as restarts are required throughout the process.
If the Intel GMA 3150 update has been installed you'll find your computer will go blank once it's loaded into Windows. There is an update available from Lenovo that I'll explain about below, but first you need to uninstall that update that is causing the problem. Press the power button on your Lenovo All-in-One for it to automatically switch off. Then turn your computer on again. AS SOON AS YOU SEE THE LENOVO START UP SCREEN, continue to press the F8 key until you see many options listed on a black background with white text (basically keep pressing the F8 key for 5-10 seconds when you see the Lenovo bootup logo). The reason for this is because the F8 key is registered just after the Lenovo bootup logo. If you don't see anything on your screen within 10 seconds, your display may be turned off even though the power is on - press the button next to the power button on your display to turn it on, and you should see the options I described.
Now use your Arrow Key on your keyboard to select Safe Mode (choose the first option) and it'll eventually boot into Windows. Then go to the Start menu, right-click on Computer and select Properties. Then from the new window that'll appear, select Device Manager from the left hand side. Then in the newer, smaller window, double-click under "Display" and find the Intel Graphics Media Accelerator option - right-click on it and select "Uninstall". Make sure from the next window that pops up you select the checkbox to delete the files relating to the driver. It will probably ask you to restart your computer at this point. Your computer should boot up into Windows as usual but everything will appear bigger than usual.
When you're logged into Windows, go to the Start menu, search for Windows Update and launch the program. From the left of the new window, select "Change settings" and where it says "Important updates" there's a drop down box; choose "Download updates but let me choose whether to install them". This is a temporary measure to ensure the Intel GMA 3150 driver isn't reinstalled until we install the update from Lenovo that fixes this issue.
Now, this blank screen issue has been rectified by Lenovo in the form of a software update that is available from http://consumersupport.lenovo.com. From there enter your serial number (found on the back of your computer) - or alternatively select the option that starts at the top of the list of Lenovo computers - for instance, my All in One is Lenovo C200 so it's listed as "3000 C200". From there, find the BIOS update that can be installed via the operating system which is at the top of the list of the drivers available. Download the .exe file, run the application for it to install itself and then restart your computer once it is installed. Then go back to the downloads page at http://consumersupport.lenovo.com and also download the second file which has a .txt extension (I believe); these are the instructions. Follow the simple instructions. Once you have followed the instructions you'll see it asking you to enter any key to restart. For me it didn't restart the computer so I had to do this manually by pressing the Windows key on the keyboard which opens the Start menu and using the arrow keys to get to the Restart section of the Start menu. Once your computer restarts, go back to Windows Update and change settings back to "Install updates automatically". Now click OK and then back at the left section select "Check for updates". Once it has checked for updates click on the "important updates available" link in the Windows Update window and find the Intel Graphics Media Accelerator option (if you can't find it, from the left select "Optional", it should be in there instead. Whichever one it is in, make sure all updates are DESELECTED in both Important and Optional and then go back to whichever section the Intel Graphics Media Accelerator Update is in, and select that update, then click OK from the bottom right and go ahead and install it. Once it is installed, you'll find your display goes black. Don't worry at this point, this is the update installed. Wait 1 minute and then press the power button for 3 seconds for your computer to turn off (once you press the power button it'll take a few seconds to turn off). Turn on your computer again and you'll find it boots back into Windows fine with that Intel update that previously caused a blank screen at start up. Everything is now done and the Intel update is now installed. The reason it causes a black screen after it is installed I don't know, but after turning off/on again, everything works fine - since the BIOS update has fixed the blank screen at start up problem.
Hope this helps. I know it's in depth, but it shouldn't take too long. I'm a customer and not a staff member at Lenovo, by the way and I did everything I described above when I had the same problem. A Lenovo staff member over the phone did explain about the Intel GMA driver causing problems when I called for an unrelated problem and then it happened to me later on, realising it's the Intel GMA driver that Windows Update installed.
My personal tech blog

Printing problem with HP deskjet 3050 all in one J610 series

I have a HP deskjet 3050 all in one J610 series which I am using with Windows Vista Version 6.0 (Build 6006: Service pack 2). Connecting is by USB port. I have not used the printer for some time, but have done all the maintence checks & it is good to go. When I want to print a letter the only thing that gets printed is the email address which is coloured blue. I think the problem is in the settings of the printer features. I can print the letter in gray scale but this is not easy to read and not suitable for business dealings.
I would appreciate help with this problem. A definition of the terms used in the printer features might help me resolve it by my self.
Thanks
This question was solved.
View Solution.

Hello @Tellen,
Thank you for visiting the HP Support Forums! I understand you are running into some print quality problems with your HP Deskjet 3050. I see when you attempt to print a letter you will only see the email address and its in blue ink.
First I would like you to click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
What does the PSDR find? If you are still not getting black text, please continue here: Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series
If after the troubleshooting has been done and you are still seeing the issue leave me with the following information:
1. What is your current Operating system, Windows or Mac and which version?
2. How is the printer connected, USB or Wireless?
3. If you print a test page from the front panel do you see the same issue?
I hope to hear from you soon.
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Problem Installing HP PhotoSmart Premium All-in-One C309g

I have a Wireless PhotoSmart Premium All-in-one Printer, model C309g. In the last 4 days, I've had 7 tech calls to HP as I cannot print. One got me printing temporarily from 2 laptops, but then failed. Most recently, after the latest tech's assistance, my printer cannot find or connect to my network. Each tech had their own theory, from a problem w/ router relating to N/G/B speed (???), a firewall blocking communication between printer/laptop, MAC address filter and the router (D-link wireless G/N/B) changes the IP address on the printer. My case was escalated 2 days ago at HP, but I have not yet heard back from them. Needless to say, I am not happy w/ HP.
I have just enough experience to be dangerous, but I do have some experience and I've learned alot by watching the HP techs. Anything anyone can suggest would be greatly appreciated!
Thanks!

You are wonderful!!!
Yes, I know my passphrase.
There were times when all items PASSED. Initial setup error msg indicated problem w/ MAC code filtering. Tech was able to resolve. At this point, the printer cannot connect to router. It sees it, asks for passphrase, errors off. All recent diagnostics run indicate FAIL for No Filtering.
BTW, throughout ALL of this, the Wireless indicator light on the printer is illuminated, wh/ led me to believe I had connectivity all along.
I was told by tech the router assigns different IP addresses for the printer (dunno why), neither of which will open in explorer. Tried to set printer manually (subnet mask IP, etc) but it kept going back to auto detect IP.
THANK YOU SO MUCH for your time. I am still interested in learning more, but I have a previous appt. If I have NOT taken the product back before I get back on line, I would still be interested in your ideas. I will check back tomorrow. Have a wonderful evening!

Problem setting up HP 6310 all-in-one printer/scanner

I have just installed archlinux for the first time, and so far everything is working great except for a HP 6310 all-in-one printer/scanner. This printer is connected by wire to a router, and the computer communicates with the router over a wireless connection. I have managed to install the printer through cups and print a test page. The problem is getting hplip and sane set up. I belive that if I get hplip set up correctly that that will take care of the sane problem.
Trying to install the printer with hp-setup:
[mike@archy ~]$ sudo hp-setup -i 192.168.1.104
Password:
HP Linux Imaging and Printing System (ver. 3.9.12)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
Setting up device: hp:/net/Officejet_6300_series?ip=192.168.1.104
| PRINT QUEUE SETUP |
Please enter a name for this print queue (m=use model name:'Officejet_6300'*, q=quit) ?
Using queue name: Officejet_6300
Locating PPD file... Please wait.
error: No PPD found for model officejet_6300 using new algorithm. Trying old algorithm...
Found PPD file: drv:///hp/hpcups.drv/hp-officejet_6300_series.ppd
Enter a location description for this printer (q=quit) ?computer room
Enter additonal information or notes for this printer (q=quit) ?
Adding print queue to CUPS:
Device URI: hp:/net/Officejet_6300_series?ip=192.168.1.104
Queue name: Officejet_6300
PPD file: drv:///hp/hpcups.drv/hp-officejet_6300_series.ppd
Location: computer room
Information:
error: Printer queue setup failed. Please restart CUPS and try again.
Restarting cups doesn't change anything.
Running hp-check gives this:
[mike@archy ~]$ hp-check
HP Linux Imaging and Printing System (ver. 3.9.12)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
| SYSTEM INFO |
Basic system information:
Linux archy 2.6.32-ARCH #1 SMP PREEMPT Sat Jan 23 13:53:44 UTC 2010 i686 Intel(R) Pentium(R) III CPU 1133MHz GenuineIntel GNU/Linux
Distribution:
unknown 0.0
Checking Python version...
OK, version 2.6.4 installed
Checking PyQt 4.x version...
OK, version 4.6.2 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.2
error_log is set to level: debug
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.9.12 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.12
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.9.12
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.12.29
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = hp:/net/Officejet_6300_series?ip=192.168.1.104
[installation]
version = 3.9.12.29
date_time = 01/24/2010 15:48:05
| DISCOVERED USB DEVICES |
No devices found.
| INSTALLED CUPS PRINTER QUEUES |
Officejet_6300_series
Type: Unknown
Device URI: socket://192.168.1.104
PPD: /etc/cups/ppd/Officejet_6300_series.ppd
PPD Description: HP Officejet 6300 Series, hpcups 3.9.12
Printer status: printer Officejet_6300_series is idle. enabled since Sat 23 Jan 2010 02:26:45 PM CST
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
| USB I/O SETUP |
Checking for permissions of USB attached printers...
HP Device 0xb1d at 004:002:
warning: Device URI: (Makeuri FAILED)
| USER GROUPS |
lp wheel network video audio optical storage scanner power users mike
| SUMMARY |
error: 1 error or warning.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
I have a feeling that the problem is here:
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.
Something about the backend isn't right, but I'm out of my depth here. Any suggestions would be appreciated.
One other point. It works with no problem in Ubuntu with both hplip and sane, so I know it is possible. I just haven't figured out the trick yet.

Well, it's fixed now, but I'm not sure why. I hooked up a HP 3970 usb scanner to my computer and when I started xsane it not only found it, but also found the 3610 all-in-one on the network. I checked hp-tools, and the 3610 was there also.So everything is working now, but I'm still curious as to why the 3610 wouldn't work with sane and hp-setup until I plugged in the 3970 to the computer.

Problems Printing to HP 2610 All-in-one

Hi Folks,
First off, I'm a Windows person so please don't assume I know the internals of OS-X very well (my wife is the Mac user, but is not the household "techie"). That said...
When we try to print documents to the HP 2610 All-in-one (USB connected directly to her G4), the print dialog comes up looking "almost" normal. The bottom of the print dialog only offers a "?", "Supplies.." and "Cancel" (but the left half of the cancel button is chopped off). "Send FAX Now" (greyed out) is also there. No print button! "Supplies" offers to sell me ink cartidges and "cancel" of course cancels the print job. Where is the "Print" button and how do I get it back?
System preferences, System Profiler shows the printer as available, the default, USB and running HP driver version 7.3.0 (the latest one HP offers and the one I installed after upgraging to OS-X 10.4.3) is 7.3.1). System Preferences, Printers also shows the printer as available and on a USB port.
I have tried printing from TextEdit, Office:X Word: Service Release 1 and AppleWorks 6 (6.2.2) and get the same messed up print dialog.
Oddly... the system has no problems printing to a Brother 1440 Laser (not defaulted) connected via USB to one of my Windows XP Pro systems. It can't print to it's direct connected USB HP 2610.
Dual 1.25Ghz PowerPC G4 Mac OS X (10.4.3) 768MB DDR SDRAM

Hi Folks,
First off, I'm a Windows person so please don't assume I know the internals of OS-X very well (my wife is the Mac user, but is not the household "techie"). That said...
When we try to print documents to the HP 2610 All-in-one (USB connected directly to her G4), the print dialog comes up looking "almost" normal. The bottom of the print dialog only offers a "?", "Supplies.." and "Cancel" (but the left half of the cancel button is chopped off). "Send FAX Now" (greyed out) is also there. No print button! "Supplies" offers to sell me ink cartidges and "cancel" of course cancels the print job. Where is the "Print" button and how do I get it back?
System preferences, System Profiler shows the printer as available, the default, USB and running HP driver version 7.3.0 (the latest one HP offers and the one I installed after upgraging to OS-X 10.4.3) is 7.3.1). System Preferences, Printers also shows the printer as available and on a USB port.
I have tried printing from TextEdit, Office:X Word: Service Release 1 and AppleWorks 6 (6.2.2) and get the same messed up print dialog.
Oddly... the system has no problems printing to a Brother 1440 Laser (not defaulted) connected via USB to one of my Windows XP Pro systems. It can't print to it's direct connected USB HP 2610.
Dual 1.25Ghz PowerPC G4 Mac OS X (10.4.3) 768MB DDR SDRAM

Problem down loading driver for All-in-one Printer

I tried to down load driver for HP Photosmart C4183 All-in-One on my laptop with OS Windows 7 Premium. During the process of installing each time it request me connecting the USB cable it gives a message that the driver am trying to install is faulty,I also tried it with my Toshiba note-book the same message appears. This is the first time am using this particular product. There some information on my computers Ineed to print ,I am only able to use the copier. Is there a way to repare the USB cable online,if it's the problem

i have a hpo deskjet printer f2180 but lost my disc how do i connect too my lap top

UPGRADE MEMORY - HP ENVY Recline Touch All in One – 23-k300br

Hi from Brasil How do I UPGRADE MOMERY of HP ENVY Recline Touch All in One – 23-k300br ???Is there a VIDEO... or a MANUAL showing that ??? ThanksYours Sincerely

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how you are looking to upgrade the RAM on your desktop computer, and I would be happy to assist you in this matter! To upgrade the memory, I recommend following the steps in this document on Adding or Replacing Memory for HP Envy Recline 23 TouchSmart All-in-One PCs. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Printer start-up problem. HP Deskjet 2050 All-in-One J510 series. Part# CH350A

Whenever I first turn on printer it immediately prints a page and says I need to scan the page and realign it. Also, the colors are somewhat faded looking.
This question was solved.
View Solution.

Hey RedDave,
If the unit is printing an alignment page on each start up, then the unit is failing to align. If the unit fails to align, then it will attempt to do so on the next start up. Do you get an alignment failed message on the computer screen?
I would advise following the steps in the document linked below to troubleshoot this condition in your Deskjet 2050 J510 series All-in-One.
'Alignment Failed' Error Message Displays on the Computer
Let me know how it goes,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Printing problem on HP Photosmart C5280 All-in-One

Hi,
I'm trying to print a single page calendar but it's coming out with streaks in 3 places. I tried 3x and the streaks are always in the same place. I'm using Konica Inkjet Paper QP Premium Photo Glossy, which is supposed to be suitable for all modern inkjet printers. Is this an ink problem, a printer problem or a paper problem?

My guess would be a print settings issue. I would suggest setting the media type to Photo paper rather than automatic and set the quality to "Best".
If that does not help please provide more details - are the streaks at a consistent spacing? Where are they on the page? What color are the streaks?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Wireless setup problem for HP Officejet J6480 All - in - One printer

I can not get my printer setup wirelessly. When I send a print job to it, the message comes back, printer offline.
I can hook up the USB cable and it prints fine. I installed the software on my IMac as instructed. I used the HP Printer manager. My IMac is setup with the airport and I have a wireless router.
Through the setup button on the printer I printed off the "wireless network test report" and the "HP network configuration" page. They show no errors.
Can anyone help me out?
I need to be able to wirelessly print from my IMac, a Gateway desktop, a Dell laptop and a Toshiba laptop.

connecting Wireless to HP j6480 printer
Problem is when I go to menu and press wireless network printer option. It’s just press menu then use the arrow keys on each side of the OK button. Then press down to Wireless Network Wizard. Press the OK button. I think the Wireless Network Wizard is the third option down when you are in the Wizard. It will then ask you for the wep for your router. I have the Verizon Jet pack from Verizon. But I assume you could use any router. My router wep was all numbers for example 99000627xxxxx all numbers. I tried and tried and kept putting in the wep but it kept coming back wrong wep code. What I did not watch was the numbers I was putting in were wrong. For example when I was putting in 990000627XXXXX that was not being put in. What was being put in was something like ypt$&^ etc. I did not know when you were putting in the numbers you had to keep pushing on the 9 key until a nine came up, then it would go to the next number you had to put in. You had to do the same for the second, third, fourth and etc until you entered all of the code. Then the wireless router connected. Why does someone not tell you that.

Win10 upgrade problem on LeNovo C50 30 All in One

Similar Messages

Maybe you are looking for