Win10 wlan fails after upgrade from Win7

Worked fine on Win7Upgraded to Win10.The WLAN key on the keyboard in now orange, even while booting or in BIOS setup.Device Manager shows the Broadcom WLAN device is active and functioning. Networking can't find the adapter- has an X in the Wi-Fi connect window.Network troubleshooter says to turn on WLAN via switch or keyboard. Since the light on the key is always orange, is it a BIOS issue?WLAN settingss shows WI-FI as Off. You can't change the state to on. (Works fine on my ProBook 6460 on Win10, but that was a clean install.) LAN adapter working fine. I tried an older Win8 driver set from the HP Website. No difference.

No one else having this issue?It's really strange , since device manager says the driver is installed and happy. The F12 key just turns Flight mode on/off -- makes no difference to WLAN working.I even remove the Broadcom WLAN adapter and replaced it, to make sure the connection was good. I hate going back to Win7.

Similar Messages

After upgrade from Win7 SP1 to Win10, HDMI is not recognised

I recently upgraded my Envy 14 from Win7 sp1 to Win10, after that my external monitor is not recognised (connected via HDMI port), I tried reinstalling the drivers from recovery manager but that did not help.

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that since your upgrade to Windows 10, you are having an issue using the HDMI on your Notebook. Here is a document I found for you called HP Notebook PCs - Troubleshooting HDMI Display and Sound Issues. Please use the information in this document to check your settings and to troubleshoot specific problems. Are you getting any specific error messages?I understand that it is not working for you via HDMI, but are you getting one of either the sound or the video?Did you happen to try another HDMI cord? Please follow these provided troubleshooting steps, re-post and let me know how everything went. Thank you!Have a great day!

YC_GEN app engine failed after upgrading from EPM 8.9 to 9.1 Rev1

we tried upgrading our EPM 8.9 + tools 8.49.23 application to EPM 9.1 + tools 8.53.08. After upgrading when we tried to run the YC_GEN app engine it failed with the below error.
Error:
17449 20.26.27 0.000111 321: &ln_1 = &lbi_1.Execute();
17450 20.26.27 0.017373 ErrorReturn-> 2 - Interlink Definition: Execution failed. (122,2) DERIVED_CG_BAT.CG_BATCH_PRV.FieldFormula Name:LoadDepends PCPC:27203 Statement:321
Called from:YC_GEN_TBLS.MAIN.GBL.default.1900-01-01.UpdDpnds.OnExecute Statement:2
17451 20.26.27 0.000080 <<< end-ext Nest=01 LoadDepends DERIVED_CG_BAT.CG_BATCH_PRV.FieldFormula Dur=2.480543 CPU=1.190000 Cycles=94840
17452 20.26.27 0.000028 <<< end Nest=00 YC_GEN_TBLS.MAIN.GBL.default.1900-01-01.UpdDpnds.OnExecute Dur=2.486408 CPU=1.190000 Cycles=94874
17453 20.26.27 0.008761 Database Options: override_connection_reset: 0
we tried using libpsfidrvr.so file which delivered with EPM as well as with tools both is not working.

I resolved my issue. Renamed search.sqlite and reinstalled Firefox 9.0.1
All default search engines are now available.

ICal delegation failing after upgrade from Snow Leopard to Lion

I've just upgraded our Snow Leopard server to run Lion Server.
I have a problem with iCal Server.
Individual calendars work OK: can be accessed from iCal / iThings and so on, and via web interface. But calendar delegation doesn't.
If I open Accounts / Preferences / Delegation from any version of iCal / Calendar I get this error:
In the server calendar server error log I see the following:
[twext.web2.dav.method.report_expand#error] Error reading property (u'http://calendarserver.org/ns/', u'calendar-proxy-read-for') for resource /principals/__uids__/BCDF1D53-4447-40A2-A035-B30F6E2EEDE4/: <StatusResponse 403 Unable to list properties: /Volumes/StorageHD/Library/Server/Calendar and Contacts/Documents>
Anyone got any ideas what is going on and / or how to fix?
Thanks in advance for any help available.

OK - Fixed it.
Turns out the cure is to use the Webcal Interface to re-create the delegations. A bit tedious, but doing this presumably forces a rewrite of the file that previously cannot be accessed. Means you need to set up the delegation again for each account - but this at least is an improvement over not being able to do anything at all.
Once fixed, delegation works just fine.
Hope this helps someone else solve the issue etc.

After upgrading from Win7 to Win8 Premiere Pro hangs on loading ExporterAVI.prm during start up

I've researched this problem extensively online and via the Adobe forums. The problem seems to have a multitude of causes and solutions, none of which worked for me. The only thing I haven't tried is a complete reformat and reinstallation of my OS which seems a rediculously drastic solution for what seems like a bug with either PP CS6 or Win8.
Also, as far as I can tell, I haven't made any other changes to Premiere whatsoever since the upgrade.
Thanks in advance for any help you can offer.

Yes, I've tried re-installing twice, but to no effect. I've tried every solution I could find online (and there were many) short of reformatting and reinstalling my OS, and nothing has worked.

Wls-10.3.4 AD auth failed with ADF 11.1.1.3 app after upgrade from 10.3.3

Hi,
i have posted same issue on wls-10.3.4 Active Directory Authentication failed after Upgrade from 10.3.3
I'm not sure if this could be an adf or wls topic.
we have a wls 10.3.3 Installation with ActiveDirectory authentication provider.
Delegated authentication against AD has worked very well.
Now we have installed wls 10.3.4 and have configured the ActiveDirectory authentication provider in the same manner.
Users and groups are listed like before in wls console, but authentication from our running ADF application is answered with "invalid username or passwort".
No exceptions are logged in domain or admin server logs.
The application was developed and compiled (ojdeploy) with jdev 11.1.1.3.
wls 10.3.4 domain is upgraded with adf 11.1.1.3 libs.
Authenication over wls console with AD credentials also fails.
Has anybody made same experiences or workarounds?
Thanks in advance
Andre

Hi,
you should take a look at the ADF security files , especially the jazn xml file. Try to open your PS2 application in the new Ps3 Jdev and look if there are changes to the jazn.xml.
Or you can check the jazn data xml file in the fmwconfig folder of the config domain folder.
and check all the authenticators if everything has the sufficient control flag.
hope this helps

No sound after Windows 10 free upgrade from WIN7 on G71-340US laptop with IDT CODEC.

After free upgrade from WIN7 to WIN10 my laptop no longer has any sound (with internal or external speakers). I have tried uninstalling IDT driver and allowing Windows 10 to reinstall the driver through scan for HW changes - still no sound. I would appreciate any guidance or fixes for this problem. Thank you.

I am happy to report I now have sound on my G71-340US laptop. After further trial and error troubleshooting I found that there is an app called IDT PC Audio (aka IDT HD Sound) installed on my laptop by HP (OEM) I think. While I'm not exactly sure what this app's function is it appears it is related to activating IDT HD Codec drivers functionality. Somehow I decided to look in Task Manager - Startup and saw this IDT PC Audio listed. I clicked on disable and then a minute later clicked on enable. After I did that, as simple as it appears, I now was able to hear sound both on internal and external speakers. This is the first time I heard any sound since upgrading to WIN10. I have checked it several times by re-booting my laptop and each and every time I now have sound. I'll continue to test this through the week and see if it continues to be OK. Meanwhile, I thought I would share this potential fix (or workaround) with all concerned. Perhaps others will find this useful and provide me your feedback. Keeping my fingers crossed! PS. BTW, if anyone out there knows what IDT PC Audio is by all means share your knowledge. I am curious why this app doesn't appear more often in the forum posts and how it may relate to the WIN10 upgrade. Sorry, but I don't recall what prompted me to look at Task Manager - Startup but I'm glad I did. It's great to hear sound again!

Unit test fails after upgrading to Kodo 4.0.0 from 4.0.0-EA4

I have a group of 6 unit tests failing after upgrading to the new Kodo
4.0.0 (with BEA) from Kodo-4.0.0-EA4 (with Solarmetric). I'm getting
exceptions like the one at the bottom of this email. It seems to be an
interaction with the PostgreSQL driver, though I can't be sure. I
haven't changed my JDO configuration or the related classes in months
since I've been focusing on using the objects that have already been
defined. The .jdo, .jdoquery, and .java code are below the exception,
just in case there's something wrong in there. Does anyone have advice
as to how I might debug this?
Thanks,
Mark
Testsuite: edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest
Tests run: 15, Failures: 0, Errors: 6, Time elapsed: 23.308 sec
Testcase:
testGetAllUsersWithFirstName(edu.ucsc.whisper.test.integration.UserManagerQueryIntegrationTest):
Caused an ERROR
The column index is out of range: 2, number of columns: 1.
<2|false|4.0.0> kodo.jdo.DataStoreException: The column index is out of
range: 2, number of columns: 1.
at
kodo.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4092)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:82)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:66)
at kodo.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:46)
at
kodo.jdbc.kernel.SelectResultObjectProvider.handleCheckedException(SelectResultObjectProvider.java:176)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.handleCheckedException(QueryImpl.java:2460)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:32)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
at
edu.ucsc.whisper.core.manager.DefaultUserManager.getAllUsersWithFirstName(DefaultUserManager.java:252)
NestedThrowablesStackTrace:
org.postgresql.util.PSQLException: The column index is out of range: 2,
number of columns: 1.
at
org.postgresql.core.v3.SimpleParameterList.bind(SimpleParameterList.java:57)
at
org.postgresql.core.v3.SimpleParameterList.setLiteralParameter(SimpleParameterList.java:101)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.bindLiteral(AbstractJdbc2Statement.java:2085)
at
org.postgresql.jdbc2.AbstractJdbc2Statement.setInt(AbstractJdbc2Statement.java:1133)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.PoolConnection$PoolPreparedStatement.setInt(PoolConnection.java:440)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.LoggingConnectionDecorator$LoggingConnection$LoggingPreparedStatement.setInt(LoggingConnectionDecorator.java:1
257)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at
com.solarmetric.jdbc.DelegatingPreparedStatement.setInt(DelegatingPreparedStatement.java:390)
at kodo.jdbc.sql.DBDictionary.setInt(DBDictionary.java:980)
at kodo.jdbc.sql.DBDictionary.setUnknown(DBDictionary.java:1299)
at kodo.jdbc.sql.SQLBuffer.setParameters(SQLBuffer.java:638)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:539)
at kodo.jdbc.sql.SQLBuffer.prepareStatement(SQLBuffer.java:512)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:332)
at kodo.jdbc.sql.SelectImpl.execute(SelectImpl.java:301)
at kodo.jdbc.sql.Union$UnionSelect.execute(Union.java:642)
at kodo.jdbc.sql.Union.execute(Union.java:326)
at kodo.jdbc.sql.Union.execute(Union.java:313)
at
kodo.jdbc.kernel.SelectResultObjectProvider.open(SelectResultObjectProvider.java:98)
at
kodo.kernel.QueryImpl$PackingResultObjectProvider.open(QueryImpl.java:2405)
at
com.solarmetric.rop.EagerResultList.<init>(EagerResultList.java:22)
at kodo.kernel.QueryImpl.toResult(QueryImpl.java:1445)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:1136)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:901)
at kodo.kernel.QueryImpl.execute(QueryImpl.java:865)
at kodo.kernel.DelegatingQuery.execute(DelegatingQuery.java:787)
at kodo.jdo.QueryImpl.executeWithArray(QueryImpl.java:210)
at kodo.jdo.QueryImpl.execute(QueryImpl.java:137)
at
edu.ucsc.whisper.core.dao.JdoUserDao.findAllUsersWithFirstName(JdoUserDao.java:232)
--- DefaultUser.java -------------------------------------------------
public class DefaultUser
implements User
/** The account username. */
private String username;
/** The account password. */
private String password;
/** A flag indicating whether or not the account is enabled. */
private boolean enabled;
/** The authorities granted to this account. */
private Set<Authority> authorities;
/** Information about the user, including their name and text that
describes them. */
private UserInfo userInfo;
/** The set of organizations where this user works. */
private Set<Organization> organizations;
--- DefaultUser.jdo --------------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<sequence name="user_id_seq"
factory-class="native(Sequence=user_id_seq)"/>
<class name="DefaultUser" detachable="true"
table="whisper_user" identity-type="datastore">
<datastore-identity sequence="user_id_seq" column="userId"/>
<field name="username">
<column name="username" length="80" jdbc-type="VARCHAR" />
</field>
<field name="password">
<column name="password" length="40" jdbc-type="CHAR" />
</field>
<field name="enabled">
<column name="enabled" />
</field>
<field name="userInfo" persistence-modifier="persistent"
default-fetch-group="true" dependent="true">
<extension vendor-name="jpox"
key="implementation-classes"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
<extension vendor-name="kodo"
key="type"
value="edu.ucsc.whisper.core.DefaultUserInfo" />
</field>
<field name="authorities" persistence-modifier="persistent"
table="user_authorities"
default-fetch-group="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultAuthority" />
<join column="userId" delete-action="cascade"/>
<element column="authorityId" delete-action="cascade"/>
</field>
<field name="organizations" persistence-modifier="persistent"
table="user_organizations" mapped-by="user"
default-fetch-group="true" dependent="true">
<collection
element-type="edu.ucsc.whisper.core.DefaultOrganization"
dependent-element="true"/>
<join column="userId"/>

</field>
</class>
</package>
</jdo>
--- DefaultUser.jdoquery ---------------------------------------------
<?xml version="1.0"?>
<!DOCTYPE jdo PUBLIC
"-//Sun Microsystems, Inc.//DTD Java Data Objects Metadata 2.0//EN"
"http://java.sun.com/dtd/jdo_2_0.dtd">
<jdo>
<package name="edu.ucsc.whisper.core">
<class name="DefaultUser">
<query name="UserByUsername"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT UNIQUE FROM edu.ucsc.whisper.core.DefaultUser
WHERE username==searchName
PARAMETERS java.lang.String searchName
]]></query>
<query name="DisabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==false
]]></query>
<query name="EnabledUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT FROM edu.ucsc.whisper.core.DefaultUser WHERE
enabled==true
]]></query>
<query name="CountUsers"
language="javax.jdo.query.JDOQL"><![CDATA[
SELECT count( this ) FROM edu.ucsc.whisper.core.DefaultUser
]]></query>
</class>
</package>
</jdo>

I'm sorry, I have no idea. I suggest sending a test case that
reproduces the problem to support.

Vpn fails after upgrade to 10.8.5

After upgrading from SL to Mountain Lion the Apple vpn client connections fail. They were connecting fine before the upgrade. They also work fine from other computers (Windows) on my network to the same addresses, so the remote side is functioning, and there have been no changes on the remote side.
The error message is "The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator." The Console messages indicate the server does in fact respond, but there is a problem with Phase 1 IKE. Message lines are pasted here with the IP addresses masked (the addresses are correct though).
10/12/13 5:33:39.340 PM configd[18]: SCNC: start, triggered by SystemUIServer, type L2TP, status 0
10/12/13 5:33:39.360 PM pppd[2104]: pppd 2.4.2 (Apple version 596.15.2) started by admin, uid 503
10/12/13 5:33:39.363 PM pppd[2104]: L2TP connecting to server '999.999.999.999' (999.999.999.999)...
10/12/13 5:33:39.363 PM pppd[2104]: IPSec connection started
10/12/13 5:33:39.379 PM racoon[2105]: Connecting.
10/12/13 5:33:39.380 PM racoon[2105]: IPSec Phase1 started (Initiated by me).
10/12/13 5:33:39.380 PM racoon[2105]: IKE Packet: transmit success. (Initiator, Main-Mode message 1).
10/12/13 5:33:39.465 PM racoon[2105]: IKE Packet: receive success. (Initiator, Main-Mode message 2).
10/12/13 5:33:39.469 PM racoon[2105]: IKE Packet: transmit success. (Initiator, Main-Mode message 3).
10/12/13 5:33:39.583 PM racoon[2105]: IKE Packet: receive success. (Initiator, Main-Mode message 4).
10/12/13 5:33:39.588 PM racoon[2105]: IKE Packet: transmit success. (Initiator, Main-Mode message 5).
10/12/13 5:33:42.671 PM racoon[2105]: IKE Packet: transmit success. (Phase1 Retransmit).
10/12/13 5:33:45.754 PM racoon[2105]: IKE Packet: transmit success. (Phase1 Retransmit).
10/12/13 5:33:45.760 PM racoon[2105]: Received retransmitted packet from 999.999.999.999[500].
10/12/13 5:33:48.839 PM racoon[2105]: IKE Packet: transmit success. (Phase1 Retransmit).
10/12/13 5:33:57.752 PM racoon[2105]: Received retransmitted packet from 999.999.999.999[500].
10/12/13 5:34:00.832 PM racoon[2105]: IKE Packet: transmit success. (Phase1 Retransmit).
10/12/13 5:34:09.465 PM pppd[2104]: IPSec connection failed
10/12/13 5:34:09.466 PM racoon[2105]: IPSec disconnecting from server 999.999.999.999
About the configuration -- the apple client is using preshared key with ppp user/password auth. The user/password and psk all work in other clients, have re-entered them many times, have deleted then recreated the connection in Network Preferences. Have restarted the racoon service, and even rebooted several times.
Googled around and found a number of reports of similar problem after upgrade to Lion or Mountain Lion, haven't found anything that works so far. Have disabled my antivirus, have rebooted network router, have changed access control in Keychain Access to allow access from all applications. Can't change the remote side configuration because of other users, need to find a way to solve this on my client side. I do have backups that would allow me to roll back to Snow Leopard, but does anyone have any other solution, would like to have a better alternative. Appreciate any/all suggestions, thanks.

Thanks again, good point. I wasn't doing this on first few tries but eventually realized I needed to clean up Keychain Access because of all the duplicates I created (orphans) so yes I did delete connection and corresponding keychains then recreate then change access. Along the way I noticed that every time I later applied a change to an existing connection setting I had to return to Keychain Access and change the access control settings again, they revert back to 'confirm' from 'all access' at each change. So even if it worked for me I realize it isn't a permanent fix.
And iCloud is 'inactive', so I guess Back to My Mac is disabled too, I don't know that app but assume so since it needs iCloud. Is there a better way to be sure it can't interfere? I do think I'm getting some phase 1 traffic out and back to the remote server evidenced by the console log, so seems the ports are not being blocked.

Screensavers don't work after upgrade from 10.3.9

After upgrading from 10.3.9 my screensavers have not been working. Apple screensavers say looking for slides, and computer name is showing a folder icon and when selected an open file window pops up. All installed 3rd party savers working fine-

Search for "com.apple.screencapture.plist", and toss it. Restart.
In the same folder, if the above fails, look for the "ByHost" folder. Look for all the files similar to "com.apple.screensaver.000a27ae9f06.plist" that do not mention any other application. Toss those. Restart

Issue with VO extension after upgrading from 11i to R12

Hi All,
We are facing issue with VO extension after upgrading from 11i to R12(12.1.3).
Most of the cases we are facing issue as given below,
oracle.apps.fnd.framework.OAException: oracle.jbo.AttributeLoadException: JBO-27022: Failed to load value at index 21 with java object of type java.lang.Boolean due to java.sql.SQLException.
Please help me out to resolve this issue.
Any help/suggestion will highly appreciate.
Thanks & Regards,
Sunita

Hi Gyan,
Thanks for the response.
There is one attribute has added in VO query.
In VO.xml file ViewAttribute definition is as given below,
<ViewAttribute
Name="DisplayApproveButton"
IsUpdateable="false"
IsQueriable="true"
IsPersistent="false"
Type="java.lang.Boolean"
ColumnType="NUMBER"
AliasName="DisplayApproveButton"
Expression="xxh_invoice_approval_pkg.check approval(invoice_id)"
SQLType="BIT" >
</ViewAttribute>
Thanks & Regards,
Sunita

Maxdb give Kernel error after upgrade from 7.3 to 7.5

Hi, our DBA is running into problems after upgrading from 7.3 to 7.5. When we attempt to start the DB we get this error:
dbmcli -d sd3 -u XXXXXX,XXXXXX db_online
ERR
-24994,ERR_RTE: runtime environment error
1,Check knldiag! Kernel died before reaching ADMIN state
The details of the error in knldiag are:
2008-07-02 14:22:39    19     11554 COMMUNIC UKT8 attached big comseg at 0x700000060000000
2008-07-02 14:22:39    19     11555 COMMUNIC UKT8 big comseg ends at      0x7000000601803F8
2008-07-02 14:22:39    16 ERR 20152 RTE      UNIX change owner with chown(knltrace,964,202) failed: Not owner
2008-07-02 14:22:39    16     11000 vdevsize 'knltrace', 666 failed
2008-07-02 14:22:39    16 ERR 11202 vdiagini vdevsize of kernel trace file unsuccsessful
2008-07-02 14:22:39    16 ERR 11599 BTRACE   -
> Emergency Stack Back Trace <----
As said, he performed the upgrade and now we can't start the DB, anybody that had the same issue?
We run on AIX 5.3 and from the unix side, nothing changed. After 7.5 we plan on going to 7.6 but that is in the stars I guess...
We posted a high message with SAP and since over 10 hours nobody picked the message up... we are getting kind of desperate... Any pointers are appreciated...
thanks

Hello Thomas,
-> If you run the database update using the database update tool, the permissions/ownership will be set correctly for the database software & the permissions/ownership of the database log files will be also changed correctly.
     Please check the upgrade log in the /sapdb/data/wrk
-> Please check the ownership of the files in the database RUNDIRECTORY.
For example, if the database owner:group of your database is sdb:sdba, then
-rw-rw----   1 sdb        sdba u2026.     knltrace
-> Please update the thread with the output of the following commands :
           sdbregview -l
           xinstinfo SD3
           id sdb
          ls -l <runditectory>
< rundirectory is the database parameter value and by default is /sapdb/data/wrk/SD3 >
        more /etc/opt/sdb
Thank you and best regards, Natalia Khlopina

C6150 won't print after upgrade from Vista to Win 7

Hello.
I have a C6150 AIO that worked fine under Vista. Since I've upgraded to Win 7, I cannot get a printout from any application or the Windows test print. The HP Solution Center test print works fine.
- Printer is hooked up wirelessly
- I've installed the latest driver from HP that is supposed to be Win 7 ready
- I've also installed the patch they recommend after upgrading from Vista
There is no error. Print job shows up briefly in the print manager window, then disappears as though it printed. I'm at a loss, any help would be appreciated.
Paul
This question was solved.
View Solution.

I hope I have now sorted this problem.....
After numerous atems to install HP Windows 7 drivers & apps and failing I decided to restore the PCs to the day before I first installed the Drivers etc.
Then I unistall HP software and reinstalled the new drivers etc. This I had to do a couple of times on the Laptop (restore 3 days back).
After installing the HP software you can print a test page, print OK. Then goto printer properties and ty to print a test page from there, if this is unsuccessful restore system and start again. Most it took me was three attemps.
Now allI have to do is hope that the windows updates dont mess it all up again!
Hope this helps you......... Good luck

Elements 5 will not start from the windows old file after upgrading from vista to win 7

Elements 5 will not start from windows.old after upgrading from vista to win 7

Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
What exactly happens ? Can you see the processes running in Task-manager?

After upgrade from 10.2.0.1 to 10.2.0.4 enterprise manager not working

after upgrade from 10.2.0.1 to 10.2.0.4
on windows enterprise manager is not working
Edited by: 830525 on Mar 24, 2012 9:44 AM

F:\Documents and Settings\hakem>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://M1C3:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
cl service is starting..........................................................
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
F:\Documents and Settings\hakem>NET HELPMSG 3547
A service specific error occurred: ***.
EXPLANATION
A service-specific error occurred.
ACTION
Refer to the Help or documentation for that service to determine the problem.
that's what happen while trying to start db console

Win10 wlan fails after upgrade from Win7

Similar Messages

Maybe you are looking for