Win2012R2 VM internet access via WIFI fine but not through a client's Web Proxy Server

Hi
I have a number of VMs running on my win 8.1 laptop. They normally access the internet via the host WIFI in a bridged config. No real issues tho sometimes it takes a reboot to clear out any stale DNS entries.
Now when I go on a client site my internet access on the host laptop is via a web proxy on a LAN connection. If I want this same access running on a standalone "all in" VM , I have a issue since it does not know about the web proxy and it is not
even on the client's LAN . No internet, means no Azure or Office 365.....
So this doesn't make any difference
Is there a way around this .. do I need share a folder/drive or authenticate myself on the Proxy, from the VM.
Anyone had this issue?
Daniel
Freelance consultant

Hi Daniel,
>>Now when I go on a client site my internet access on the host laptop is via a web proxy on a LAN connection.
"LAN connection" means physical NIC (Realtek PCIe GBE Family Controller) ?
" web proxy " means adding a proxy server IP in IE ?
Bounding the NIC (Realtek PCIe ) to external virtual switch then connect all VMs to that external virtual switch ,still can not access ?
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

I am having trouble with our Comcast e-mails. Going thtough the internet oprion they are fine, but not through your website.

When using your website to access Comcast and our e-mails the e-mails are disorganized and words above them are out of line. If I access Comcast through internet explorer the inbox and e-mails are normal. I have re-booted the computer countless times and reset the modem to no avail. It appears that the issue is with Firefox.
== This happened ==
Every time Firefox opened
== Yesterday, 5/3/10.

Same issue, not sure of resolution, have downloaded latest version of firefox.

HT201365 I do not have my iPad 3 connected to the internet via a mobile account. Of course I have Internet access via wifi. Am I still protected by this service?

I want to know if my iPad is protected through the theft protection in iOS 7. I have wifi connectability, but mobile service connection that I subscribe to.

I mostly use Safari. But I also tried it on Firefox, Mozilla, and Camino. Mac OS X. It's my work computer, so I've only tried it at the office. I have to be connected through the Ethernet cable to access my files and email on the server.

No internet access via WiFi!

Hi there!
I used to be connected PPoE for years to the internet via the classical way: Mac mini 2009 --> Ethernet cable --> Router (Thomson ST780)
If I suppress the Ethernet cable, why am I unable to connect to the internet using Airport and the WiFi Network I set up on my router?
Many thanks in advance for your answers!

That solved my problem!
The IP was wrong, also:
there wasn't a router and DNS set.
Thanks, LaPastenague!

TS1368 My wifi works fine and I can access the store fine, but when I try to install an app, I get the message "cannot connect to iTunes store"

My wifi works fine and I can access the store fine, but when I try to install an app, I get the message "cannot connect to iTunes store"

I am guessing there is an issue with the store right now considering so many people are having the same problem on different platforms. I can't access it with my iPod Touch 4th Gen, yet my wifi is working and I can access the internet using other apps, but when I go to update a couple of apps from the iPod, I get the same error message after I try to sign in to the store.

Can I share my internet connection via wifi AND use my wireless printer at the same time?

Not completely familiar with wifi capabilities. I have this new setup in my office. I want to share my iMac internet connection via wifi so I can text and check emails using my iPhone (no cell service inside the building). Which works fine. However, I now cannot print wirelessly to my HP printer (LaserJet Pro 400 color). Once Internet sharing is off, I can print just fine. Any other wireless options, or just go get a long USB cable?

Hi,
It is not a multitasking printer, other devices may keep it therefore the best option in this case: connect it to your wireless router and all devices which are conntected to this router can sahre the printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Internet access via hairpinning for Spoke to Hub IPSec VPN

I have a hub and spoke configuration with a number of site-to-site IPsec VPNs from 857's terminating on an 1811 at the hub. Also in the mix is a client-to-site (EZVPN) which also terminates at the hub.
I need to ensure all traffic destined for the internet goes out through the hub 1811. I've looked at trying to use a form of hairpinning so that "interesting traffic" from remote sites gets NATted at the hub router to the internet.
I have seen a number of configurations (in these forums) where internet-directed traffic from EZVPN clients is forced via a hairpin out via the hub router. I am trying to emulate that feature with the site-to-site IPSec VPNs - where internet directed traffic from spokes must go through the hub router, and not be permitted to go directly to the internet from the spoke routers.
Attached are configs for the hub router and one of the spoke routers, and a pdf diagram.
I can get traffic to the internet (in my test lab) from the lookback connector (1.1.1.1) by extended command pings, I have connectivity from the spoke1 lan to the hub lan (pings again); but not from the spoke1 lan to the internet via the hub router.
Thanks in advance for any help
Phil

Thanks, guys. Yes, those two access lists did need some attention.
I've changed the access list on the spoke router from
access-list 120 permit ip 192.168.8.0 0.0.0.255 192.168.0.0 0.0.255.255
to
access-list 120 permit ip 192.168.8.0 0.0.0.255 any
which allows traffic from the spoke lan out to the internet via the hub router. I've also taken NAT off the spoke router.
But I also need to change the matching access list on the hub router. I changed the old access list from
access-list 121 permit ip 192.168.0.0 0.0.255.255 192.168.8.0 0.0.0.255
to
access-list 121 permit ip any 192.168.8.0 0.0.0.255
but I couldn't pass any traffic over the VPN. If I remove access-list 121 completely, then traffic does pass, but the crypto map on the hub router becomes "incomplete".
When the tunnel is up, and passing traffic, I can ping an internet address (in my lab), but not all traffic is getting through. Every second ping times out, often there are 3 or 4 pings that time out.
Any suggestions as to what to do with the access list (121) on the hub router, and what can I do to get more reliable results (i.e. get every ping to work)?
TIA
Phil

Why can't I use my mac as a WiFi extender if it is receiving it's internet connection via WiFi?

Now I'm not the most tech savvy person, but why is it I can't use my mac as a WiFi extender if it is getting its internet signal via WiFi? Would it mess up the original signal it's receiving?

You can do it.. but we do not recommend the use of a computer to do a task that a cheap router can handle better..
But what you need is a second wifi card. In a Mac there are a number of ways to achieve that.. without card slots .. USB wireless sticks that are Mac compatible is one way.
You set up the computer with ICS (internet connection sharing) just look it up.
You receive signal on whichever network you have .. Ethernet being hugely superior of course.. and then the computer can act as router/bridge to duplicate that connection via any other network connection it has.. on a Mac with thunderbolt.. you could use a second ethernet via adapter.. or wifi with USB stick etc.
However.. a cheap second hand Apple router will work far better doing the same wireless extend.. without requiring your computer to be on 24/7 for any other client to use.

Iphone6 touch id stops internet access both wifi and cellular

iPhone 6 64GB iOS 8.0.2 Verizon - With Touch ID on (at least one fingerprint is configured), there are times when I depress HOME to wake the device and then try to use the fingerprint reading service, internet access stops both on wifi and cellular. Turning wifi off and on doesn't help. The wifi signal shows as OK. No subsequent internet access on either wifi or cellular. Have to restart the device (I hold the home and power buttons together until the Apple logo displays).
Right now, it is OK to not use Touch ID. In fact, since I specify how long to wait before locking the device it is actually more convenient to not use Touch ID.
However, when Apple Pay is available this will be a significant problem.
Any advice? Thank you.

I have not verified this, but I have read that the ios 6 ipad uses either the cell network or the wifi network, but not both at the same time.
You should be able to test this.
I'm not enough of a network tech to know if you could get this to work, but there are mifi devices that do wifi to cellular.
Here is one example:
FreedomPop provides 500meg of free 4g cellular data per month! You do need to buy a wireless device at $39. There are ways of getting bonus megs. One gig of addition data costs $10 per month. I used about 10megs per hour of internet surfing.
When signing up, you need to be careful with your selections. On some screens, the free option is a small link below the large button. FreedomPop employs a Pavlovian Dog < Operant conditioning > thing of getting you used to clicking on the large button then they change the large button to a paid add-on.
Once you setup your account, you need to go to your account options screen to turn off automatic paid data download once you exceed your quota.
The performance seems about like my DSL connection.
http://www.freedompop.com/offers.htm?experience=organic.default
http://www.freedompop.com/coverage
Get it before they go broke.
Robert

TS2370 My iPhone detects my my Belkin G5 series wifi router but not connecting, I searched in internet and found many people have similar experience. Please tell , how can I fix it?.

My iPhone detects my my Belkin G5 series wifi router but not connecting, I searched in internet and found many people have similar experience. Please tell , how can I fix it?.

Try rebooting the router. Just remove the power for a few seconds. No settings are lost.

Problem = always shut down when connect to the internet (both via wifi & mobile data)

problem = always shut down when connect to the internet (both via wifi & mobile data) my problem is my phone (sony z1) regularly shut down automatically when connect to the internet (both via wifi & mobile data). it just happens after i downloaded and installed the latest available software (as following): Android version: Google Android 4.3 (Jelly Bean) Latest available software: 14.2.A.1.136 Release started: 2014-01-30 please suggest how to fix this problem.

I suggest you disable any battery savers or task killers if you have.Boot your phone in safe mode and see how it is:
http://talk.sonymobile.com/t5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

I'm lost with my new "used" iPod touch 4th gen. Just downloaded iOS 6; seems to be trying to access a WIFI signal but I have it hard wired into my MAC and I do not have WIFI. Need iPod for dummies.

I'm lost with my new "used" iPod touch 4th gen. Just downloaded iOS 6; seems to be trying to access a WIFI signal but I have it hard wired into my MAC and I do not have WIFI. Need iPod for dummies - very basic and simple help.

On the computer you should be able to go to the network properites. Go to the TCP part and unchec the line that says obtaind DNS automatically and check the one that says use the following. Add the 8.8.8.8 and Google other 8.8.4.4.
For more info see:
https://developers.google.com/speed/public-dns/

AP Extreme (WiFi Access Point)... LAN... Web Proxy Server help.

Hello...
I need a little help configuring this Airport Extreme as a Wireless Access point, serving a bunch of iPads via the schools LAN connection for which traffic is routed through a Web Proxy Server. I've been told to set it up as a bridge as the PC LAN and Proxy are providing NAT but can't seem to crack it.
The WiFi side of things is up and running, we can all see and connect to the AP.
I'm told that it was working fine before the school break in the summer, then something was changed and the position of the AP altered.
The Web Proxy Server is normally accesses from the PC's via the following address... IP > 10.12.14.122 // PORT > 3128
I'm not certain where the Proxy settings need to go in the new 'simple' Airport Utility, can't see a place for Port at all?!?
(I've taken the AP home, tried it on my home network and it works fine, so we know its all OK and its down to config).
Here are some screen images of the settings as they are, that do not work.
(I was trying a few different settings hence the screens like Static/DHCP etc.)
Any help is greatly appreciated.

Hi Daniel,
>>Now when I go on a client site my internet access on the host laptop is via a web proxy on a LAN connection.
"LAN connection" means physical NIC (Realtek PCIe GBE Family Controller) ?
" web proxy " means adding a proxy server IP in IE ?
Bounding the NIC (Realtek PCIe ) to external virtual switch then connect all VMs to that external virtual switch ,still can not access ?
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Webservice end up in Access via 'NULL' object reference not possible error

Hello everyone,
I have a particular issue when I run a webservice on webclient but when i run on sap R/3 it works fine.
The dump which it give when I test the web service is
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "RPCTRSU0" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
The code where it ends up in error is
2607 data: l_wb_interface type ref to fp_wb_interface.
2609 data: p_interface_data type ref to
                                  fb_interface_data.
2610 data: l_interface TYPE REF TO
                               if_fp_interface.
2611 data: l_exceptions type ref to cx_root.
2613 data: l_parameters         type ref to
                                       if_fp_parameters,
2614       l_parameter_table    type tfpiopar.
2615 data: l_fpintf_name type fpname.
2616 data: wa_dd03p type dd03p,
2617        DD40V_WA type dd40v.
2618 data: l_intf_imp_item type line of tfpiopar.
2620     l_fpintf_name = i51t8_adb_fpint.
2621            TRY.
2622               l_wb_interface = cl_fp_wb_interface=>load(
2623                                      i_name = l_fpintf_name
2624                                      i_mode =
                                  if_fp_wb_object=>c_mode_read
2626                                      i_language = sy-langu
2627                                ).
2628             CATCH cx_fp_api_usage into l_exceptions.
2629 *              RAISE error.
2630             CATCH cx_fp_api_repository into l_exceptions.
2631 *              RAISE error.
2632             CATCH cx_fp_api_internal into l_exceptions.
2633 *              RAISE error.
2634           ENDTRY.
2635
>>>>>     l_interface ?= l_wb_interface->get_object
2637     p_interface_data = l_interface->get_interface_data( ).
2638     l_parameters = p_interface_data->get_parameters( ).
Please let me know how to go about twith this error
Regards,
Raj

x

Access via NULL reference object not possible

Hi friends,
I have created an wda application which uses the table popin to display data.
So that i have created a view with two of the fields as link to action UI element.
In the Events/Actions of the link to action element i implemented the following logic.
data wd_table_cell_editor type ref to cl_Wd_view_element.
data wd_table_column type ref to cl_wd_table_column.
data wd_popin type ref to cl_wd_table_popin.
data id type string.
 wd_table_cell_editor ?= wd_this->m_view->get_element( id ).
wd_table_column ?= wd_table_cell_editor->get__parent( ).
wd_popin = wd_table_column->get_popin( ).
context_element->set_attribute( name = 'SELECTED_POPIN' value =
wd_popin->id ).
So when i click on the link to action in the table column of the field am getting the following error
Access via NULL reference object not possible.
While debugging i have noticed that this error was coming at the below step of the code.
wd_table_cell_editor ?= wd_this->m_view->get_element( id )
in the m_view->get_element( id ) does not contan any value , its showing as table , as null value cannnot be assigned may be its throwing the above error.
But i didnt understand why the view is not getting UI element id ....
Can one please suggest me where might be the wrong....
Regards
Sireesha.

Hi nithya,
Could you please calrify the doubts for the following q's.
1. As u said in the above post, i have changed the code to the below.
 data: lr_table type ref to cl_wd_table,
lr_table_col type ref to cl_wd_table_column.
lr_table ?= wd_this->m_view->get_element( 'TABLE' ).
lr_table_col = lr_table->get_column( ID = 'TABLE_CONNECTID' ).
wd_popin = lr_table_col->get_popin( ).
(At the above step which is in bold , eventhough there is value in lr_table_col->get_popin , its not assigning a value to the wd_popin, throwing same error NULL etc.,)
context_element->set_attribute( name = 'SELECTED_POPIN' value =
wd_popin->id ).
2. Before changing the code suggested by u, the follwoing was the code from standard example.Its working fine in the application wdr_test_table.I have debugged the code.The value is getting assigned into wd_table_cell_editor.
The same thing i have done but its failing to assign the value. thats y its throwing null reference error. Here i have a confusion how its assigning a value and y not in the z application.am giving the code below which is in standard and my application.Please clarify these.
data wd_table_cell_editor type ref to cl_Wd_view_element.
data wd_table_column type ref to cl_wd_table_column.
data wd_popin type ref to cl_wd_table_popin.
wd_table_cell_editor ?= wd_this->m_view->get_element( id ).
( Note : wd_this->m_view->get_element contains value but not assigning it to the wd_table_cell_editor and same code in the standard behaving correctly like assigning the view value to the cell editor. Y this behavior, please advice me)
wd_table_column ?= wd_table_cell_editor->get__parent( ).
wd_popin = wd_table_column->get_popin( ).
context_element->set_attribute( name = 'SELECTED_POPIN' value = wd_popin->id )
Regards
Sireesha.

Win2012R2 VM internet access via WIFI fine but not through a client's Web Proxy Server

Similar Messages

Maybe you are looking for