Win2k8 Remote Control Not Working With SRSS 4.2 + SRWC 2.2

Hi there.
I have an install of Windows Server 2008 (32bit) with SRSS 4.2 & SRWC 2.2 setup. I was previously on SRSS 4.1 & SRWC 2.1 and having the same issue I am having now, which to me tells me this problem is unresolved or i'm being a total muppet. (hopefully not the last one)
Windows Terminal Server environments has this awesome remote control feature where you can login to an RDP session which is already active and take control of the session while the end user is still logged in.With Server 2003 this works perfectly fine- it's brilliant. WIth 2008 it is a nightmare. It works for a split second and then closes off. The end users session also gets locked out (not logged out) and they have to put their windows credentials in to carry on working again.
Now... I can remote control users who are logging in via Remote Desktop on Windows XP/Vista etc.. but I can't with the Sun Ray Sessions. Does the SRWC 2.2 fully compatible with RDP 6.1 or is there any information anyone can give me to point me in the right direction of resolving this issue, like I said.. Win 2k3- Works like a dream....
Any help would be greatly appreciated.
Regards
- Joe.

I just realised I hadn't posted the logs from SRSS Server with the issues. I have just tried on another WIN2K8 Server which wasn't configured by myself or my company and the same symptoms occurred. See logs below:
Oct 1 10:58:06 ESL-SOLARIS-SPARE kiosk:uttsc[4095]: [ID 702911 user.notice] /opt/SUNWuttsc/bin/uttsc[104]: 4116 Abort
Oct 1 10:58:06 ESL-SOLARIS-SPARE Sun Ray Connector proxy:[4117]: [ID 855542 user.error] Child closed socket prematurely, session shutdown
Oct 1 10:58:06 ESL-SOLARIS-SPARE kiosk:uttsc[4123]: [ID 702911 user.error] /opt/SUNWuttsc/bin/uttsc exited with error code 134 - exiting
Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcrit: [ID 702911 user.notice] Info: critical application uttsc (pid=3902) exited with non zero status: 134
Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 422571 user.info] Info: a critical application has exited.
Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 126805 user.info] Terminating Kiosk Primary Session ( pid=3902 )
Oct 1 10:58:06 ESL-SOLARIS-SPARE kioskcritd[3752]: [ID 308018 user.info] kioskcritd stopped
Oct 1 10:58:07 ESL-SOLARIS-SPARE utauthd: [ID 794400 user.info] SessionManager0 NOTICE: EMPTY: ACTIVE session
Oct 1 10:58:15 ESL-SOLARIS-SPARE kiosk:utkioskconfig:refresh[4381]: [ID 702911 user.info] Enabled Kiosk Mode for display ':2'
Oct 1 10:58:15 ESL-SOLARIS-SPARE dtlogin[4274]: [ID 118685 user.info] pam_sunray_amgh::[DPY=2] AMGH_SUMMARY: token=pseudo.00144fb78760, username=, AMGH_Done?=NO(Local Session), Details=AMGH is not configured., AMGH_Target=*NONE*
Oct 1 10:58:15 ESL-SOLARIS-SPARE dtlogin[4274]: [ID 976841 user.info] pam_kiosk: pam_sm_authenticate: Initiating Kiosk session with user utku2
Oct 1 10:58:15 ESL-SOLARIS-SPARE kioskcritd[4420]: [ID 190395 user.info] kioskcritd started
Oct 1 10:58:57 ESL-SOLARIS-SPARE Sun Ray Connector proxy:[4612]: [ID 855542 user.error] Child closed socket prematurely, session shutdown
Anyone able to help me out?

Similar Messages

Apple remote contra not working with Lion

I installed Lion and my littele apple remote control does not work anymore with my mac book pro.
Is there any solution for that?
Thanks

It's not working for me either.
I know that Lion doesn't include Front Row, but the remote is not working with any other application (ex. iTunes).
Please somebody help us!

HT1619 my remote is not working with the new imac 27" :(

my remote is not working with the new imac 27" i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

<http://store.apple.com/us/product/MC377LL/A/apple-remote>
"Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
<http://www.iospirit.com/products/remotebuddy/>

Remote Control does work with Sylvania Color TV/DVD Model 6520FDF

I cannot get the remote control to work the volume on a Sylvania Color TV/DVD Model 6520FDF TV. Can anybody help me?

Have you tried the scan mode to scan for the proper code?
TV/DVD combo units are notoriously hard to program to universal remotes. So if you did a scan and none of them worked then the likelihood is that the remote just will not work with that unit. If you have not tried a scan, here is the instructions to do so.
WHAT IF NONE OF THE CODES WORKED?
If none of the codes worked, try the following procedure. (As before, we will use the example of a TV. For other devices use the appropriate Device Key instead of the TV key in step 2 and 3.) 1. Turn on your TV.
2. Press and hold the TV key.
3. While holding down the TV key, press OK. 4. Release both keys. The Device Keys will blink twice.5. Press 9 - 2 - 2. 6. Point the remote at the TV.
7. Press PLAY.8. Press FASTFORWARD (FF). Every time you press FF the remote sends out a new power-off command to the TV. Keep pressing FF until the TV turns off. (You can press REWIND to go back.) 9. When the TV turns off, you have found the right code. Press OK to store this code. Note: There are over 300 TV and DVD codes. The most common codes are tried first, but you may still need to press over 300 times to find the right code. If you reach the end of the list of codes the entire remote will flash twice and return to normal operation. You can exit programming at any time by pressing Exit.
Message Edited by spacedebrismark on 05-17-2009 02:26 PM
====================================================================================
Error exists between keyboard and chair.

My remote will not work with my TV @nywhere card, Please help.

I have just installed my TV @nywhere card and it works great. I have all the cables plugged in right but I can't get the remote control to work. I even tried a new battery. I'm running windows XP pro. Any Suggestions?

What's wrong with it is it's broken. The power button is broken. The dock port may be broken. The battery may have reached the end of its useful life.
Make an appointment at the genius bar of your local Apple Store and have it checked out. There are no words that will fix failed or broken hardware other than "here is my credit card"...
An out of warranty replacement for an iPhone 4 is only $149.

What remote controls will work with the iMac 27inch.

Okay I hung the new iMac on the wall in my kitchen. Used the apple adapter I have a little apple remote control that works the dvd player fine. Of course the wireless keyboard and the wireless mouse work fine. I have an elgato tuner because this iMac is my dvr/tv does anyone have a remote that will work the iMac as a dvd and work the elgato hybrid tuner. Just trying to make this simple. Thanks

iTunes itself, that is it's built-in remote speaker function, will work only with an Airport Express. There may be other wireless speakers that have their own drivers or transmitter; someone else here may be able to make a recommendation.
Message was edited by: Dave Sawyer

Remote control not working on Touchsmart 610-1030uk

Had been working fine for long time. Now out of warranty. Battery fine. Indicator on remote and on PC (white LED on front panel) both show IR is working. Mouse and keyboard still work fine. I have tried uninstalling and reinstalling drivers for Microsoft eHome infrared transceiver but still can't get the machine to respond to remote control.
Any thoughts?
This question was solved.
View Solution.

Hello frrw. Sorry to waste your time. I changed the batteries and it works fine. It seems the red LED on the remote and the white LED on the PC that flashes when I press a button on the remote do not mean that the batteries are strong enough.
Meanwhile I have that recurring problem with blu-ray players. I will post a new question and maybe you can help.
Many thanks.

BT Vision Box and Remote Control not working prope...

Hi,
Can anybody help me please?
I have a black BT Vision Box. The remote control had increasingly been sticking so tonight I just turned the power off tonight, left it off for 20 seconds and turned it back on.
It seemed to turn back on and reboot itself normally, it took the amount of time it normally does on a couple of occasions when it froze a few months back. However since I rebooted it approximately 3 hours ago it has been turning itself off and rebooting itself every 10 minutes or so. On one occasion when I turned it off on the front of the machine and left it for a few minutes, it turned itself on and started rebooting itself again.
The remote control is worse than when it was sticking, now there is a delay of up to 30 seconds after I press a button. Sometimes it does not work at all, when that happens it just becomes stuck and eventually reboots itself.
So far I have tried turning it off and on again, I have also tried rebooting the internet connection (which is working fine). I have tried pressing the off button on the actual box for 10 seconds and resetting it that way. I have put new batteries in the remote. Nothing has worked. If anyone can help me that would be great.
Solved!
Go to Solution.

Hi,
Unfortunately I can't get that far now.
I turned all TV related systems off last night in an effort to see if it would work properly today.
I came home from work and turned everything on. The system boots itself up until it gets to a grey screen that says "Nearly there..." with the BT logo in the bottom right corner. It stays like that for approximately one minute. Then it turns itself off and starts rebooting itself again.
I have tried pressing the on/off button on the front of the box and holding it in for 10 secs or so until the box turns itself off and reboots but the effect is still the same as above.
Do you have any other suggestions pleaase, aside from throwing it in the bin?

Remote control not starting with window

Hi there
I have a X-Fi? sound card, with a remote control... I just want it to start with windows, but if I check " Acti'vete the RC when Windows Starts" , I still have to do it manually...
I've already tried to reinstall entertainment center, but it has no longer effects on it.
Do you know what I have to do ?
What kind of registry key should I add to get it automatically ?
Or, at least, what kind of shortcut do i have to put in "start" directory ?
Lots of questions, just problem
P.s. : sorry for my english speaking

I had to go through this process when an iCloud shared photostream would not display on the Apple TV screensaver.
Two easy solutions.
When you press the Menu button, does the Apple TV light blink? If not, go to the Second option below.
If yes, begin with the First option below.
First option:
Reboot Apple TV. Hold down the Menu button and the Down button at the same time until the light blinks, then unplug the device for six seconds, and plug it back in.
After the Apple TV reboots, see if your remote is working. If not, continue to the second option.
Second option:
Un-pair the remote, then re-pair the remote.
To un-pair it, hold down the Menu button and the Left button at the same time until an icon appears on the screen showing a remote with two cloud-like icons. That means the remote is un-paired.
To re-pair the remote - or to pair it with the Apple TV for the first time - hold down the Menu button and the Right button at the same time. It should pair with the Apple TV almost immediately.
Both options have worked for me, when occasional Apple TV issues happen.

Remote Control only works with Battery Cover

Hello.
I previously thought that my remote control for the Audigy 2 ZS Platinum did not work at all even after I went through the process of a clean hardware and software install.
I had noticed from the first time that I placed the remote on my desk that the battery compartment rattled but thought little of it until I could not get the remote control to function and began the troubleshooting process.
After replacing the battery with a fresh one, and the remote still not functioning, I decided to simply place the battery in the remote without the cover and voila, the remote began to work. I also tested it with the original battery that it shipped with, to be thorough, and discovered that it also worked. It appears that the cover prevents contact between the battery and the terminal inside the remote.
I hope this process helps another user and would like to know Creative's take on this situation and whether or not I can do a simple replacement via their warranty or if I have to send the remote in at cost to me for two weeks of testing first.

They should be able to just send a replacement, it sounds like that one is faulty alright.
The contact details for Customer Support (in the different regions) are:
Americas Customer Support
European Customer Support
Asia Customer Support
Cat

Re: EJB Control not working with methods that contain arguments

John,
I'm not qualified to answer your EJB control question, but before you
become too disillusioned with page flows I'd like to mention that the
request scoped data form and and the return-to="page" issues you
mentioned have been addressed for the next service pack. We've
introduced the ability to specify a page flow scoped form bean which
lives for the life of the page flow, and we've clarified the return-to
values to include both "currentPage" and "previousPage" which should
clarify the expected behavior.
I hope you give it a try.
Thomas
John Hundley wrote:
Oh well guess you guys gave up on this one. Thats ok, I have utilized a workaround
that forgoes your non working controls just like I have workarounds for your dataforms
that do not maintain their data between pages, your retrun to page that does not
work etc.... At this rate I should have just used struts and JBoss.
"John Hundley" <[email protected]> wrote:
oop's attached the wrong one here is the right one.
"John Hundley" <[email protected]> wrote:
Ok I have attached one of my beans.
"Anurag" <[email protected]> wrote:
John,
For a stateless session bean, the ejbCreate() method is called for
every
individual method call. This is because the bean instance is returned
to the
pool after every method call, it does not hold any state.
I am still surprised about the behaviour you are seeing.
Can you just attach your stateless session bean. You need not sendthe
dependent files, since we only want to sniff the call made to the stateless
EJB method, and are not concerned with the implementation.
Regards,
Anurag
"John Hundley" <[email protected]> wrote in message
news:[email protected]...
Anurag,
I am using the GA release. My control looks identicle toTraderEJBControl.jcx
except of course it is extending a different home and bean interface.The
bean
itself does not exacly match the traderbean but it does look very
similar
to MusicBean.java
in the tutorialsApp. One thing that has me a bit confused is the
fact
the
create()
method is being called every time I make a method call on the control.Shouldn't
the bean only be created once at the first method call and persistfor the
life
of the session?
John
"Anurag" <[email protected]> wrote:
John,
Have you tried running the ejbControl/TraderEJBClient.jws in SamplesApp.
It
does involve calling methods on the stateless EJB TraderEJB through
an
EJB
control, which accept parameters and run fine.
Could you also confirm that you are using the 8.1 GA release, andnot
the
beta.
Regards,
Anurag
"John Hundley" <[email protected]> wrote in message
news:[email protected]...
Raj,
I cannot attach them here. I am not sure how you would test them
anyway
as I
would have to send you my Oracle schema and you would have to
set
up
a
database
instance. There is no way I can do that. If you could please
send
me an
e-mail
I can attach the relevant files in reply and you could take a
look
at them
and
see if you see any obvious problems.
Thanks,
John
"Raj Alagumalai" <[email protected]> wrote:
John,
Can you attach the ejb jar, the jcx and the jws files that you
have
created.
I will test and get back to you.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"John Hundley" <[email protected]> wrote in message
news:[email protected]...
Hi,
I have created an EJB control on a stateless session bean.
For
some
reason when
I attempt to call a method on my control that takes any number
of
arguments I
get a java.lang.IllegalArgumentException yet if I call a method
that
takes
no
arguments everything works fine. I used the debugger to walk
through
the
code
and have discovered that every time I call any method on the
control
the
create()
method gets called, this is exactly where the error is occurring.It is
almost
like the control is trying to pass my method args to the create()
method
instead
of the method I am calling. I have tested all of the methods
in
the
ejb
by manually
coding everything (getInitialContext ejb.create etc) in a .jsp
and
calling
all
of the methods within that .jsp. There they all work fine
so
I
am
pretty
sure
the control is doing something funky. Any ideas as to what
is
going
on
and how
I can fix it?
Thanks,
John

Was this issue ever resolved ? We are running into the same problem.
The last response is "I'm not qualified to answer your EJB control question."
Can this be escalated to someone who can please ?
Regards
Shahriar

Will remote control earphones work with the nano 5th gen?

I've been trying to figure out if the remote control earphones will work with the 5th generation nano. It doesn't look like it comes with it, which is very sad, so I'm wondering if it would be worth it to buy it separately. Does anyone know if you can still use it to change songs and volume etc. on the nano? Please help!

Good to know! Thank you very much

EJB Control not working with methods that contain arguments

Hi,
I have created an EJB control on a stateless session bean. For some reason when
I attempt to call a method on my control that takes any number of arguments I
get a java.lang.IllegalArgumentException yet if I call a method that takes no
arguments everything works fine. I used the debugger to walk through the code
and have discovered that every time I call any method on the control the create()
method gets called, this is exactly where the error is occurring. It is almost
like the control is trying to pass my method args to the create() method instead
of the method I am calling. I have tested all of the methods in the ejb by manually
coding everything (getInitialContext ejb.create etc) in a .jsp and calling all
of the methods within that .jsp. There they all work fine so I am pretty sure
the control is doing something funky. Any ideas as to what is going on and how
I can fix it?
Thanks,
John

Oh well guess you guys gave up on this one. Thats ok, I have utilized a workaround
that forgoes your non working controls just like I have workarounds for your dataforms
that do not maintain their data between pages, your retrun to page that does not
work etc.... At this rate I should have just used struts and JBoss.
"John Hundley" <[email protected]> wrote:
>
>
>
oop's attached the wrong one here is the right one.
"John Hundley" <[email protected]> wrote:
Ok I have attached one of my beans.
"Anurag" <[email protected]> wrote:
John,
For a stateless session bean, the ejbCreate() method is called for
every
individual method call. This is because the bean instance is returned
to the
pool after every method call, it does not hold any state.
I am still surprised about the behaviour you are seeing.
Can you just attach your stateless session bean. You need not sendthe
dependent files, since we only want to sniff the call made to the stateless
EJB method, and are not concerned with the implementation.
Regards,
Anurag
"John Hundley" <[email protected]> wrote in message
news:[email protected]...
Anurag,
I am using the GA release. My control looks identicle toTraderEJBControl.jcx
except of course it is extending a different home and bean interface.The
bean
itself does not exacly match the traderbean but it does look very
similar
to MusicBean.java
in the tutorialsApp. One thing that has me a bit confused is the
fact
the
create()
method is being called every time I make a method call on the control.Shouldn't
the bean only be created once at the first method call and persistfor the
life
of the session?
John
"Anurag" <[email protected]> wrote:
John,
Have you tried running the ejbControl/TraderEJBClient.jws in SamplesApp.
It
does involve calling methods on the stateless EJB TraderEJB through
an
EJB
control, which accept parameters and run fine.
Could you also confirm that you are using the 8.1 GA release, andnot
the
beta.
Regards,
Anurag
"John Hundley" <[email protected]> wrote in message
news:[email protected]...
Raj,
I cannot attach them here. I am not sure how you would test them
anyway
as I
would have to send you my Oracle schema and you would have to
set
up
a
database
instance. There is no way I can do that. If you could please
send
me an
e-mail
I can attach the relevant files in reply and you could take a
look
at them
and
see if you see any obvious problems.
Thanks,
John
"Raj Alagumalai" <[email protected]> wrote:
John,
Can you attach the ejb jar, the jcx and the jws files that you
have
created.
I will test and get back to you.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"John Hundley" <[email protected]> wrote in message
news:[email protected]...
Hi,
I have created an EJB control on a stateless session bean.
For
some
reason when
I attempt to call a method on my control that takes any number
of
arguments I
get a java.lang.IllegalArgumentException yet if I call a method
that
takes
no
arguments everything works fine. I used the debugger to walk
through
the
code
and have discovered that every time I call any method on the
control
the
create()
method gets called, this is exactly where the error is occurring.It is
almost
like the control is trying to pass my method args to the create()
method
instead
of the method I am calling. I have tested all of the methods
in
the
ejb
by manually
coding everything (getInitialContext ejb.create etc) in a .jsp
and
calling
all
of the methods within that .jsp. There they all work fine
so
I
am
pretty
sure
the control is doing something funky. Any ideas as to what
is
going
on
and how
I can fix it?
Thanks,
John

XFI-64 Bit Driver, remote control not work

I have just installed the 64Bit drivers for my X-fi Fatality. The sound works however the 'sound console' that plugs into the dri've bay at the front of my pc does not seem to be working. I press start on the remote control and nothing happens. The X-fi volume icon does not appear in the system tray. When I boot up the 32 bit version of windows all is well and i can use the remote control and all of its functions. Can anyone help as this is now very frustrating.

Originally Posted by MiLoCzE
Hi men, if you will use remote control, you must install ECUP_PCVTAPP_LB_3_40_21 . :-)
What is " ECUP_PCVTAPP_LB_3_40_21 " ?
I searched on the internet and all I could find about it is that it's a virus? Can you tell me something more about that file ?
http://www.pc-face.com/exe-file-erro...exe-fix-22694/

The app "remote" is not working with itunes - please help!

I click the add library button and it shows me the code - as soon as it shows me the code I see the icon for the ipad in my itunes window. i type in the code, but it's not working ... it beeps after about 10 seconds and then the same window is displayed saying "please enter the passcode"

From my understanding, I thought an app with a + sign meant that it is optimized for ipad and/or iphone, and you pay one price, and can download on two devices. remote is NOT optimized for ipad, but it should work. It did work on my laptop, which is why I'm frustrated it won't work on my desktop --- what's even stranger is the fact that my desktop "sees" it ... it's just the code isn't working

Win2k8 Remote Control Not Working With SRSS 4.2 + SRWC 2.2

Similar Messages

Maybe you are looking for