Win32 application not valid

Awhile ago I posted a topic about iTunes 7.0.I am having trouble downloading the new software.Whenever I finish downloading the iTunes 7.0 software,a message pops up on the screen that says 'The publisher cannot be verified'.I still click run,and another message pops up that says 'The Win32 application is not valid'.I have a dial-up connection,so I don't know if my connection has something to do with this.What does this mean?Is there any way I can fix this problem so I can successfully download iTunes 7?
I really don't want to end up taking my iPod Nano back to the store.
Any help would be greatly appreciated.
-Ashlee

OK, I too had this problem, was at it for 2 1/2 days. My girlfriend bought her son an ipod also, she got a disc with hers that I didn't get with mine. I picked up her disc last night and this is what i did. I installed the disk, big help. But then I had to go into my system configuration utility setup and under the general tab you select selective setup, and load system services then click launch or ok. I tried to write everything down while I was doing it. It worked for me because was able to get on and d/l songs onto my sons ipod nano.
I know it is fustrating but this is what worked for me. I think it is a block on your computer to not let something from another computer company (apple) onto your computer.
Anyway, I hope it works for anyone who tries it.
GOOD LUCK!

Similar Messages

FPM application - Not validating the Input at Review time

Hello Guru,
I am creating new FPM application from existing, as we have some issues in existing application. In existing application when I click on Review button it will fire below FPM event and validate the data and gives error message if any validation error.
fpm.raiseReviewAndSaveEvent(IFPM.EVENT_REVIEW, IFPM.EVENT_SAVE,
new VAC("Old DC Name", "Old Component Name" ));
In my new application when I click on Review button it does not validate the data and even not display validation error messages. I have changed according to my new DC as below.
fpm.raiseReviewAndSaveEvent(IFPM.EVENT_REVIEW, IFPM.EVENT_SAVE,
new VAC("New DC Name", "New Component Name" ));
My question is how FPM konws which fields it has to validate?
Do I have to mention this information somewhere, if yes then how Can I put information for my new DC?
Hope this helps to understand my requirements.
Your help will be appreciated.
Thanks,
Ameet

Hi,
Please double check if MCU on FE server works well, when two participants are connected, the session is essentially peer-to-peer. When three or more participants are connected, the Application Sharing feature depends on the Front End Server Multi Point Control
Unit (MCU) to provide the sharing stream to all parties.
Please check if port 5065/TCP is available on Front End server.
Please also troubleshooting with the help of Recommended Steps part in the link below:
http://blogs.technet.com/b/nexthop/archive/2012/11/05/lyncmd-troubleshooting-lync-server-2010-application-sharing-internal-and-remote-scenarios.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I am trying to download icloud control panel via icloudsetup.exe to windows Toshiba laptop and get a message" \icloudsetup.exe is not a valid Win32 application. Can anyone help? I am new to Apple stuff.

Need help for icloud photo stream, have activated ps on iphone 4 and set up icloud back up for email, contacts, iwork, and find my ihone. Need to find photos that we thought were being saved/shared as well but evidently not. Found on another search that I may need the icloud control panel so tried to download it but when try to install i get, C:\Users\Downloads\icloudsetup.exe is not a valid Win32 application. I am using a Toshiba laptop with windows 7, which the system requirements are met. I am new to Apple stuff, so any and all help would be greatly appreciated.

It suggests the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Error message, not a valid win32 application

Please help if you can, because I am new to computers. I have downloaded itunes (setup), which is only 11 meg, but it should of been 56 meg. When I click on it now, it say's run, then itunes setup exe is not a valid win 32 application.
I have tried this about 4 or 5 times, even deleting the whole file and re-installing several times. Please help, many thanks

Have you had a look at this troubleshooting page? It may be of some help: iTunes: Windows reports that iTunesSetup.exe is not a "valid Win32 application"

ITunes set up gives an error message saying not a "valid win32 application"

I am using Windows 7 and trying to download iTunes, but when I try to open the iTunes set up it gives an error message saying that it is not a "valid win32 application". It does the same for downloading quicktime. I have no idea what this means or what to do about it.

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

When i try to install Firefox 4 on my 64 bit Windows 7 Ultimate, error that it is not a valid win32 application

When I downloaded the Firefox 4 installer and tried to install the software, an error message appeared that the application was not a valid win32 application. have deleted the file, re-downloaded it but with same effect. Therefore I cannot install Firefox 4
I have Windows 7 Ultimate 64 bit, 4 GB internal memory,
Intel i7 processor. language English

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files

I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application How can i download i

I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application How can i download it?

In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Scanstate.exe from USMT 5.0 from Windows 8.1 ADK fails on Windows XP with "%1 is not a valid Win32 application"

We started to test our Windows XP SP3 (32-bit) to Windows 7 migration zero-touch task sequence in ConfigMgr 2012 R2 and we can't get past the following error from the "Capture User State" step running on XP...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The task sequence execution engine failed executing the action (Capture User State) in the group (Capture Files and Settings) with the error code 2147942593
Action output: ... params successful
Building USMT command successful
Successfully connected to "\\JHQCM01.jhq.net\SMPSTOREE_FB121F31$\A1ADF87C012E6998B5753B112299BEE4F8868207FAE3D75671798DF6A7DD1A33"
Executing command line: "C:\_SMSTaskSequence\Packages\JHQ0004E\x86\scanstate.exe" "\\JHQCM01.jhq.net\SMPSTOREE_FB121F31$\A1ADF87C012E6998B5753B112299BEE4F8868207FAE3D75671798DF6A7DD1A33"
/o /localonly /encrypt /keyfile:*** /efs:copyraw /v:5 /vsc /l:"C:\WINDOWS\CCM\Logs\SMSTSLog\scanstate.log" /progress:"C:\WINDOWS\CCMLogs\SMSTSLog\scanstateprogress.log" /i:"C:\_SMSTaskSequence\Packages\JHQ0004E\x86\MigApp.xml"
/i:"C:\_SMSTaskSequence\Packages\JHQ0004E\x86\MigDocs.xml" /i:"C:\_SMSTaskSequence\Packages\JHQ0004E\x86\MigExclusions.xml" /uel:90 /ue:VM0142511382\* /configC:\_SMSTaskSequence\Packages\JHQ0004E\config.xml
Invoking ReleaseSource on USMTPackagePath C:\_SMSTaskSequence\Packages\JHQ0004E
OSDMigrateUserState finished: 0x800700c1
CreateProcess failed. Code(0x800700C1)
Command line execution failed (800700C1). The operating system reported error 2147942593: %1 is not a valid Win32 application.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To troubleshoot, we tried running the x86 version of scanstate.exe (from USMT from the Windows 8.1 ADK) manually by just double clicking on it on a few Windows XP SP3 systems and we get a similar error as seen below...
So, we thought maybe USMT from our Windows 8.1 ADK install maybe somehow corrupt, but downloading and installing it again results in the same error, so it does not seem to be a file corruption issue. The x64 version of scanstate.exe works
fine on 64-bit OS's, its just Windows XP SP3 (32-bit) we are seeing this error.
Has anyone successfully using scanstate.exe from USMT 5.0 from the Windows 8.1 ADK successfully to capture user state from a Windows XP SP3 (32-bit) system?
Regards,
JJ

Windows 8.1 ADK comes with a newer version of USMT (NOT 5.0) and crashes. I learned this today the hard way. I hope Windows 8.0 ADK's loadstate.exe works for restoring to a 8.1 machine.
Yesterday i used Windows Easy Transfer to move from XP to 7, and then re-did the backup in 7 so it would be compatible with 8.1, and it only restores files, not settings.
So i will test USMT 5.0 in this same scenario, because i have 30 machines to change to newer machines with 8.1

Error when installing VMM - %1 is not a valid Win32 application

Hi all
I'm attemping an install of SCVMM and despite installing all prerequisites I'm faced with the following when I launch the installer/disc and click 'Install':
"Error starting the Virtual Machine Manager Setup Wizard. %1 is not a valid Win32 application"
this error is the proceeded with another:
"Microsoft Visual C++ 2010 Redistributable was not successfully installed. The selected Virtual Machine Manager feature cannot be installed without this prerequisite. Retry setup or manually install Visual C++ 2010 Redistributable
from Microsoft Download Center."
The latter package is already installed and I have re-downloaded and re-installed as well to no avail. All .Net packages are installed too.
I'm running a Windows Server 2012 R2 x64 virtual machine in a HyperV host (HyperV Server 2012) and have navigated the disc and launched the "SetupVMM.exe" located in the amd64 directory as I realise the above Win32 error points to a x86 application
- still no joy, the same errors!
I have tried the installer in a VMWare 2012 server with the same error and on a physical Windows 7 machine again same error so this makes me think I'm either missing something basic or have overlooked something seems the environment doesn't seem to make
a difference (although obviously not attempted a x86 environment but SCVMM is listed as x86 or x64).
This is for a lab test and personal experience before production so I realise running SCVMM within a virtual machine that is hosted on the same hypervisor isn't good practice - but it's a start :)
Thanks in advance for any help you can give me.
Sam

Are you installing directly from the ISO? If so, you can try with a new ISO in case this is broken. Also make sure your machine is joined to the domain and that you are executing the setup in the context of a local administrator.
Eventually, try to copy the ISO to local disk and run setup from there.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Error 'RecoveryMgr.exe is not a valid Win32 application' when trying to restore in Win7

I really hope someone can help as this is driving me mad!
System details - G62 Notebook running Windows 7
The notebook crashed after a Windows update and wouldn't boot up. I made it into the recovery manager and back my files before restoring to factory settings.
Since getting back in I am unable to get my files back. I have tried through the recovery manager but it does not allow me to see the files on the dvd. I have also tried through backup and restore but no joy there either. When I click on RecoverMgr.exe on the dvd I get error 'RecoveryMgr.exe is not a valid Win32 application' and it won't open.
I hope someone has managed to solve this before as I would love my files back. All suggestions greatly appreciated and thanks in advance.

Thanks Mumbodog. Unfortunately I have tried and the files won't copy. Starting to think they are corrupt! Have tried on a few different PC's but no luck. Really annoyed Any other suggestions?

When I try to open Firefox 4.0 I get an error message saying that it is not a valid Win32 Application. What do I do? I am using Windows XP Sp3

I downloaded Firefox 4.o exe. When I tried to open it I got an error message stating that it was not a valid Win32 application. I am using windows XP SP3. How do I get it to open?

[[Firefox is already running but is not responding]] has steps that you can try. It sounds like you may have something that is hanging your browser on exit (probably an extension or a locked profile) and the steps on that page should help clear it up.

ITunesSetup.exe not a valid WIN32 Application????

I've been deployed to Afghanistan for the past 13 months and have another 4 to go. I'm trying to download Itunes 7.0.2 and when I go to install it I get an error that reads ITunesSetup.exe is not a valid WIN32 application. What the **** does this mean. I only have a couple of days to get this fixed and my Ipod crashed with that RavMon virus lastnight. Anyone please help

I had the very same problem with installing, and have no idea what it means. I've searched all over support, and asked the very same question about 4 months back.
One odd thing about it, though. It didn't seem to make a difference when installing. The installer would get partially finished, and the error would appear. The installer would then start "rolling back actions" and when you would think it would close, it would start back up again. I have no idea why, but the installation completed normally, and my itunes works fine.
If it doesn't work the first time, try it a couple more times. That's what happened with me.

ITunesSetUp.exe is not a valid iTunes Win32 application? (Windows 7)

I just installed Windows Ultimate for Windows 7 on my computer after a new hard drive was installed. I downloaded iTunes 9.0 but when I clicked iTunesSetUp.exe
I got the following error message:
"iTunesSetUp.exe is not a valid iTunes Win32 application".
What do I need to do to install iTunes 9.0?
Thanks in advance,
Dressy

Try the instructions in this article.
(22799)

Itunessetup.exe is not a valid win32 application?

I am trying to install the newest version of iTunes, but no matter what I try, the same error message comes up and won't let me install -- itunessetup.exe is not a valid win32 application.
What do I do?
Thanks.

Espero que alguien hable español ya que yo tengo el mismo problema. Y hasta el dia de hoy no he podido utilizar mi ipod. Gracias anticipadas...hmc

Itunessetup.exe is not a valid win32 application?!? help!

has anyone else been getting an error message when trying to upgrade to itunes 7 that says something to the effect of "itunessetup.exe is not a valid win32 application" ???
does anyone know what this means or how i can fix it??

grgatzby,
Empty the cache files of your browser and temp directory as described here: http://docs.info.apple.com/article.html?artnum=93976
Then save the file again to another location on the computer.
If you cannot clear the cache, try to download the iTunes and quicktime setup installer from the quicktime site: http://www.apple.com/quicktime/download/win.html
Jason

Win32 application not valid

Similar Messages

Maybe you are looking for