Win32 exception in FormDesigner.exe

i am unable to open my LiveCycle Designer.
I keep getting the following error message:
"An unhandled win32 exception occurred in FormDesigner.exe"
any ideas??

Found a solution: http://forums.adobe.com/message/2140571#2140571

Similar Messages

Win32 exception in FormDesigner.exe error when inserting a table

I'm trying to insert a simple table on a document but every time I try I get a pop-up that "Adobe LiveCycle Designer ES has encountered a problem and needs to close." When I looked into it a bit further it appears to be an issue of "an unhandled win32 exception in FormDesigner.exe"
Any ideas?
Thanks!

Found a solution: http://forums.adobe.com/message/2140571#2140571

Unhandled win32 exception in crw32.exe

Post Author: eddieedwards
CA Forum: Upgrading and Licensing
I have installed Crystal Reports XI Developer's Edition on a Windows 2003 SP2 box, and now whne I try to launch the application I get the error: "unhandled win32 exception in crw32.exe" and it tries to launch the debugger. I downloaded and installed CRXI SP4, but it did not make any difference. Any ideas?
Thanks,
Mike

Post Author: eddieedwards
CA Forum: Upgrading and Licensing
Turns out this was an operating system issue. The new (to me, at any rate) Data Execution Prevention feature was set to its default and was preventing Crystal from starting. Silly me.

Possible cause for unhandled Win32 exception?

Hi,
Using SDK 7.0.5, I'm calling AVDocOpenFromASFileWithParams on an AVDocOpenParamsRec that specifies a sourceDoc. Suppose the sourceDoc has only recently been opened and may still be in the process of loading. Is it possible that this could result in an unhandled Win32 exception in acrobat.exe? I'm running version 8.1.5.
Thanks,
Daniel Sheiner

Our code is completely inside DURING/HANDLER blocks. I've spent the morning sweeping through for any fragments of code that weren't. I did find a few, but after adding DURING/HANDLER blocks around them, the problem persists.

An unhandled win32 exception occured in java.exe , While running JNI

I'm trying to use JNI to call 3rd party VB DLL , like this
JNI <> VC++ DLL <> VB DLL
In VC++DLL ,I have function(named Open) that call 3 function in VBDLL
I have tested c++ code this function (by copy it and paste in normal vc++ project) ,and It works !
But when I call this function(Open) via JNI , I've got "An unhandled win32 exception occured in java.exe" by Visual Studio Just-in-Time Debugger !!
I think the problem is in the 3rd function that I call in Open, because when I remove the 3rd function It doesn't raise any exception.
Before I do this, I alrealdy test every function in VBDLL in VB Project , and they work fine (Include the 3rd function that I think It cause exception).
Can anybody tell me what's going on here ?
or anything that I can do to fine What cause this problem ?
Thanks in advance ^^
Edited by: voteforpedro on Sep 2, 2008 4:18 AM

You either have a pointer problem or you are calling the 3rd party library in an unexpected fashion.
In terms of testing the most likely reason is that it wasn't tested enough. Moving/changing code modifies the layout in memory which can expose previously hidden pointer problems.

CS3 crashes with a message of "an unhandled win32 exception has occurred in photoshop.exe"

I have been able to use Photoshop CS3 just fine but all of sudden it'll randomly crash with a message in Microsoft's Just In Time debugger stating "An unhandled win32 exception has occurred in photoshop.exe" I have Visual Studio 2008 installed and the 3.5 framework that comes with it that's why I have the JIT debugger.
My system meets minimum requirements for Photoshop CS3, and I have used Photoshop CS3 before just fine (prior to reformatting).
Thank you for your time.

Try resetting your preferences with the ctr-alt-shift. If successful will get window outlining options.

Recurring crash in WWAHost.exe: Error: "An unhandled win32 exception occurred in WWAHost.exe[]". How to diagnose/fix?

It's now 4days, I keep getting this Error from Start up. Am using
windows8.1, since about a year now, first time I get any Error.
I can't tell what really caused it, I am a Web/Desktop programmer and for the past 1 month, I haven't done any
Desktop programming or windows store Apps, am just using Dreamweaver and
Firefox for my Current E-commerce Web Apps, now for the past
4days, this is happening...
One recurring problem is the following dialog, which
pops up every few second, and it's annoyingly annoying.

Hi Erick,
Did this error appear when you test your Dreamweaver application using Just-In-Time Debugger?
This problem may because the absolute path of the shell resides in the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\shell with a value c:\windows\explorer.exe or c:\winnt\explorer.exe.
To resolve this problem, modify the value of the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\shell with a value explorer.exe.
For the details, please refer to this article:
BUG: You receive an "Unhandled Win32 exception" error message you use the Just-In-Time (JIT) debugger
https://support2.microsoft.com/kb/811191?wa=wsignin1.0
In addition, I suggest you ask MSDN forum for more professional help:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vsdebug
Karen Hu
TechNet Community Support

Visual Studio Just-In-Time Debugger error "An unhandled win32 exception occurred in AcroRd32.exe [31

I installed Reader X and when I tried opening it, I received a Visual Studio Just-in-time Debugger error "An unhandled win32 exception occurred in AcroRd32.exe [3116]. I uninstalled, rebooted and tried reinstalling and received the same error.
I tried disabling the just in time debugger mentioned in http://www.programmerfish.com/disable-visual-studio-just-in-time-debugger/ and received the error "An unhandled win32 exception occurred in AcroRd32.exe [4080]. Just-in-time debugging this exception failed with the following error: No installed debugger has just-in-time debugging enabled. In Visual Studio, Just-in-time debugging can be enabled.....
I do have Microsoft Visual Studio 2005 installed.
Any ideas?

We discovered that Reader X users that had an older version of PGP installed received this error. We implemented a registry change on these devices which resolved the issued. PGP recognized it was an incompatibility issue on their end, and supposedly, with the newer version of PGP it will be resolved. In order to resolve this, try using Adobe Readers whitelisting feature. Below are the steps to follow:
i.   Add a registry entry enabling the use of whitelisting:
       [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Adobe\Acrobat Reader\10.0\FeatureLockDown]
       "bUseWhitelistConfigFile"=dword:00000001
ii. Create a whitelist file called "ProtectedModeWhitelistConfig.txt" and place it
       in the Adobe Reader executable path i.e. C:\Program Files\Adobe\Reader 10.0\Reader
iii. The ProtectedModeWhitelistConfig.txt file will need to contain the string
       SECTION_ALLOW_ANY = *PGPhk*

SAP B1 881 - an unhandled win32 exception occurred in upgrade.exe [3772]

Hi,
I'm trying to upgrade a db from version 800238 (2007 SP01 PL13) to version 881312 (881 PL04) and the upgrade allways fail giving the error «an unhandled win32 exception occurred in upgrade.exe » and it opens the debugger.
If i debug it, it shows the message «Unhandled exception at 0x103bfba3 in Upgrade.exe: 0xC0000005: Access violation reading location 0xfffffbc4.»
I've upgraded other dbs from other versions.
What can be the problem?
Best Regards
Paulo Serol

Windows Server 2003 R2 SP2
SQL Server 2005 SP3
Info on Management Studio:
Microsoft SQL Server Management Studio 9.00.5000.00
Microsoft Analysis Services Client Tools 2005.090.5000.00
Microsoft Data Access Components (MDAC) 2000.086.3959.00 (srv03_sp2_rtm.070216-1710)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 6.0.3790.3959
Microsoft .NET Framework 2.0.50727.42
Operating System 5.2.3790

Large document - An unhandled win32 exception occurred in InDesign.exe

I am working on a medical directory that contains information about doctors e.g. address, specialty, interests etc. Data is being pulled out of SQL Server in XML format.
I have designed a template in InDesign which holds the style information and then those styles are mapped to XML tags.
The number of doctors that are pulled out of SQL Server in XML format are around 243000. The resulting number of pages for these entries could be around 5000. XML file size is 62.4MB.
Whenever I try to import this XML file I get the following exception that says:
There are few steps involved during XML import process:
1) Processing elements for import
"successful"
2) Handling Content
Following exception occurs at this step
An unhandled win32 exception occurred in InDesign.exe [4815]
Possible Debuggers
"a list of possible debuggers"
Do you want to debug using the selected debugger?
"Yes" or "No"
3) Handling Post Import
"never reached"
4) Autoflowing text
"never reached"
The above problem never occurs if I am dealing with number of records that result in less than 1000 number of pages.
Any suggestion about the cause of this exception?
or any suitable alternative in this case?
Thanks in advance

Thanks very much Spier for your quick response.
"I've never worked with XML import, but my suspicion is that this isn't so much a limitation of ID as of your system resources. That's a LOT of pages to have to keep in memory, and working in chunks is probably a more viable solution"
I agree with you in this case and I broke down the section in smaller chunks as follows:
A separate XML for:
Doctors with surname starts with A
Doctors with surname starts with B
Doctors with surname starts with C
Doctors with surname starts with Z
Now there are two scenarios
1. Import all XMLs in one ID template one by one
Import XML and append each time to existing contents.
Continue this process until all XML files have been successfully imported to ID and then save the file as ID document.
This all appears to be fairly simple and straightforward but the story ends (ID crashes) when the resulting number of pages exceeds 1000.
2. Create a separate document for each XML chunk and combine at later stage
Import XML for, let say, Doctors with surname starts with A.
Save as ID document.
continue this process until ID documents have been created for each chunk.
There is a possibility of fewer number of doctors on the last page of each IDD leaving the, let say, half of the page empty.
This is not acceptable.
Doctors with surname starts with B must start right after the last doctor with surname starting with A not on the new page.
This is where I am struggling with dividing the data in small chunks.
If we can overcome this situation then I am sure that small chunks are the way to go but so far I am struggling with both of the scenarios mentioned above.
"particularly if export to PDF is filing on larger docs, too. You can assemble multiple PDFs into a single file in Acrobat in a matter of seconds."
This is a very good point and will be helpful during the process but I will be more concern about importing XML at this point of time.
Hope you understand both of the scenarios explained above.
Thanks very much again for your quick response!!!!!!!!!!!!!!!!!!!!!!!

An unhandled Win32 exception occurred in crw32.exe 5048. Crystal 2008 Crash

I have been using Crystal Reports 2008 with no problem. I have recently installed the trial version of Crystal Server 2008 and am encountering a problem where the reports are now crashing when I try to edit them within Crystal. It happens at various times, but particularly when trying to update a parameter field or add one to a report. The Visual Studio Just-In-Time Debugger window pops up, listing as a possible debugger "New Instance of Visual Studio 2005". An line at the top of the window shows "An unhandled Win32 exception occurred in crw32.exe 5048.
We were using .Net v2.0, I've upgraded to v3.0 and no change. I've turned off DEP.
I uninstalled Server 2008 and all started working fine again. Reinstalled Server 2008 with antivirus etc disabled, and the problem returns, the reports keep crashing.
Getting desperate, any suggestion please?
Regards, Diane

Hi Henry,
Crystal Reports 2008 is not officially tested with SQL Server 2008.
Try with this:
1. Reduce the 'Hardware acceleration' setting in Microsoft Windows.
2. To access the 'Hardware acceleration' setting in Microsoft Windows:
Click Start > Settings > Control Panel > System > Display > Settings > Advanced > Troubleshooting.
There are typically six possible settings for 'Hardware acceleration': from 'None' to 'Full'.
If you are using Dual monitor run the CR application on primary monitor cause Dual monitor is not tested with CR.
If still the issue occurs then manually un-install and reinstall the application.
Regards,
Shweta

An unhandled win32 exception occurred in crw32.exe

Hi,
We just got a new Win2003 small business server and installed Crystal Reports 2008 and Crystal Reports Server 2008.
I'm trying to work with some existing reports created in CR XI that access SQL Server 2005. I am able to access SQL Server tables but any time I attempt to access a stored procedure I get the error:
An unhandled win32 exception occurred in crw32.exe
I have turned off DEP completely (NoExecute=AlwaysOff in Boot.ini). The stored procedures have been around a long time and definitely work.
Any suggestions?
Thanks,
Rob

Hi Rob,
VS 2003 is only compatible with CR 9.1 (Bundle version which comes with VS), CR XI R1 and CR10.
VS 2005 is only compatible with CR 10.2 (Bundle version which comes with VS), CR XI R2 and CR 2008.
VS 2008 is only compatible with CR 10.5 (Bundle version which comes with VS), and CR 2008 SP0.
You can download platform supported guide from the following link which will help you to create compatible environment:
[https://websmp105.sap-ag.de/bosap-support]
Hope this helps!!
Regards,
Shweta

Un unhandled win32 exception occurred in B1mail.exe (5824)

We work with internal e-mails to send an overview to the projectleaders for the jobs they have to do the next day.
After installing SBO 2007A these mails are only send when we have to restart the server.
We also have the next message : "Un unhandled win32 exception occurred in B1mail.exe (5824)"

Dear André,
In order to solve this issue I would do as follows:
1) De-install Server Tools
2) Switch off DEP according to Microsoft Knowledge base: http://support.microsoft.com/kb/875352
1. Click Start, right-click My Computer, and then click Properties.
2. Click the Advanced tab, and then click Settings under the Startup and Recovery field.
3. In the System startup field, click Edit. The Boot.ini file opens in Notepad.
4. In Notepad, click Find on the Edit menu.
5. In the Find what box, type /noexecute, and then click Find Next.
6. In the Find dialog box, click Cancel.
7. Replace policy_level with AlwaysOff.
WARNING Make sure that you enter the text accurately. The Boot.ini file
switch should now read:
/noexecute=AlwaysOff
8. In Notepad, click Save on the File menu.
9. Click OK two times.
10. Restart the computer. NOTE: This step is very important at this stage!
11. Install Server tools.
12. Restart the computer again.
Kind regards
Mario Schoenberg
Senior Support Consultant
SAP Business One Forums team

An unhandled win32 Exception Occurred in sawserver.exe[5360]

Hi All,
When we clicked on one particular Dashboard page we got the below error , but its working for other Dashboards pages:-
and due to this error the presentation services is stopped.
Visual Studio Just-In-Time Debugger Open which message as
"An unhandled win32 Exception Occurred in sawserver.exe[5360]
On the Application.log at path
<OracleBI_Home>\OracleBI\oc4j_bi\j2ee\home\application-deployments\analytics
i got the error message as :-
10/06/09 15:51:48.51 analytics: An existing connection was forcibly closed by the remote host
10/06/09 15:51:48.51 analytics: Servlet error
java.net.SocketException: Connection reset
     at java.net.SocketInputStream.read(SocketInputStream.java:168)
     at java.io.FilterInputStream.read(FilterInputStream.java:111)
     at com.siebel.analytics.web.sawconnect.SAWConnection$NotifyInputStream.read(SAWConnection.java:131)
     at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
     at java.io.BufferedInputStream.read(BufferedInputStream.java:235)
     at com.siebel.analytics.web.sawconnect.sawprotocol.SAWProtocol.readInt(SAWProtocol.java:162)
     at com.siebel.analytics.web.sawconnect.sawprotocol.SAWProtocolInputStreamImpl.readChunkHeader(SAWProtocolInputStreamImpl.java:232)
     at com.siebel.analytics.web.sawconnect.sawprotocol.SAWProtocolInputStreamImpl.startReadingNewMessage(SAWProtocolInputStreamImpl.java:46)
     at com.siebel.analytics.web.sawconnect.SAWServletHttpBinding.forwardResponse(SAWServletHttpBinding.java:105)
     at com.siebel.analytics.web.SAWBridge.processRequest(SAWBridge.java:307)
     at com.siebel.analytics.web.SAWBridge.doPost(SAWBridge.java:335)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
I check the already post on this Forum but not helped much.

Your Presentation services has crashed. If you are not running the latest OBIEE release you should try upgrading. Otherwise only Oracle Support will be able to help as this is an application crash.

An unhandled win32 exception occurred in TNSLSNR.EXE [1040].

Hi
I have received following error after enabling Automatic Shared Memory Management in 10.2.0.3.0.
An unhandled win32 exception occurred in TNSLSNR.EXE [1040].
Any body know why this error occurs.
-Rushang

Are you installing 10g Disco on the same server where R12.1.1 is installed ? If so, are you using a separate ORACLE_HOME for the Disco install and following all of the steps in this MOS Doc ?
Using Discoverer 10.1.2 with Oracle E-Business Suite Release 12 [ID 373634.1]
HTH
Srini

Win32 exception in FormDesigner.exe

Similar Messages

Maybe you are looking for