Win7 64-bit PDF Preview works- except with PDF Forms?

I have Win7 64-bit with Adobe Acrobat X Standard installed. I receive PDFs as attachments in Outlook 2010, and for the most part, the PDF preview works fine. Downloaded PDFs that I have in a folder with the Preview Pane work fine as well. However with PDF forms, which have cells that you can manually fill in, i.e. name, hire date, etc. I receive an error "Please wait, If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document." This happens in both Outlook 2010, and the Windows Explorer preview pane panel. The attached website does not fix my issue as the registry key is correct. Any ideas? Thanks! http://www.pretentiousname.com/adobe_pdf_x64_fix/#downl

Hello NI_LV_82_User,
The DIAdem PDF output is not compatible with Windows 7 (DIAdem 11.1 was released in July 2009, Windows 7 was made available in October 2009). The DIAdem R&D department is currently working on a fix to add this functionality under Windows 7. We are working to provide a solution as soon as possible and will make the release of the Service Pack known here on the forum as soon as it is available.
Message Edited by Otmar on 11-30-2009 02:13 PM
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Similar Messages

I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"

I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"

COPY QTMovieWin.dll FROM c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"

Safe cs4 ai file with txt as pdf or at least with pdf compatibility. font licensing restrictions...

HI I have been trying to save PDF and ai file with PDF compatibility. I used the ai font brand new era outline G98 , and it shows me message that the font could not be embeded, and safe with PDF because of licensing restrictions....??? What do I do? I am not an expert in illustrator.

Radana,
This may be one for the Typography forum;
http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
you may get the best possible answer from Dov there.

PDF Preview working intermittently from workspace for FR reports

We are facing a strange issue while running HFM reports from workspace and taking PDF Preview, the report runs fine but when going for the PDF preview we dont get it every time.
Some it works when we try again by clicking on PDF preview button again,
Sometime it does not work for all the reports.
The issue gets tempararily resoloved when we reboot the servers. But can re-occur any time.
We are using Hyperion 11.1.1.3 on Windows 2003 SP 2, with Ghost Script 8.54 (32 Bit)
Currently are seeing few errors FRPrintSrv.log
03-31 09:33:32 ERROR PrintInstanceThread     Error generating printout for report instance '/Users/Final Reports/PGBU/OLDBUT01/NEWCOVER'. Return code: -1
04-01 01:26:53 ERROR PrintInstanceThread     Could not print instance: 'OLDBU016'. The print file was not produced.
04-01 01:26:53 ERROR PrintInstanceThread     Error generating printout for report instance '/3Yasir(PGBU)/OLDBUT03/OLDBU016'. Return code: -1
04-01 05:06:53 ERROR PrintInstanceThread     Could not print instance: 'OLDBU016'. The print file was not produced.
04-01 05:06:53 ERROR PrintInstanceThread     Error generating printout for report instance '/3Yasir(PGBU)/OLDBUT03/OLDBU016'. Return code: -1
04-01 05:07:30 ERROR PrintInstanceThread     Could not print instance: '103'. The print file was not produced.
04-01 05:08:01 ERROR PrintInstanceThread     Could not print instance: '103'. The print file was not produced.
04-01 05:08:01 ERROR PrintInstanceThread     Error generating printout for report instance '/Users/Delivery_Export_Reports/B104/103'. Return code: -1
04-05 10:46:34 ERROR PrintInstanceThread     Error generating printout for report instance '/Users/Delivery_Export_Reports/OLDBUT03/OLDBU016'. Return code: -1
04-05 10:52:53 ERROR PrintInstanceThread     Could not print instance: 'ACCBYRC2'. The print file was not produced.
04-05 10:52:53 ERROR PrintInstanceThread     Error generating printout for report instance '/Users/Delivery_Export_Reports/ACCBYRC2'. Return code: -1
04-05 11:20:47 ERROR PrintInstanceThread     Could not print instance: 'ACCBYRC2'. The print file was not produced.
04-05 11:20:47 ERROR PrintInstanceThread     Error generating printout for report instance '/Users/Delivery_Export_Reports/ACCBYRC2'. Return code: -1
Regards
Rajeev Rumale
Edited by: Rajeev Rumale on Apr 6, 2011 4:49 AM

Yes, Oracle support recomanded installing GPLghost script 8.63 version , earlier we were using AFL Ghost Script 8.54.
But we have met only partial success till now, it worked in Developmented envrionment but did not work in other environment.
The issue still open

Win 7 pro 64 bit does not work nice with tv tuners

my win 7 pro 64 bit will not work with three recommened tv tuners, though not specific to 64 bit . I know one works great withmy old 32 bit xp system. all three different recommended tuners crashed my system three times amd informed me the flash player that comes in the software is not compatable with my system. also flash player stand along in my system will not work right all the time. worked so well in my old system? any thoughts on this dilemma. really do not want to return my new diamond tv wonder hd 750 card. otherwise this system blazes very appy with it, thanks.

This forum is for Firefox support, you should try the customer support for the manufacturers of the TV tuner cards.

PDF Preview handler error with outlook 2013 on RDS 2012R2

Anyone had any issues with outlook x64 2013 office and "PDF Preview handler", we are running adobe 11 with server 2012 R2. CHecked all the recommended reg settings are correct:
"Change the AppID value to {534A1E02-D58F-44f0-B58B-36CBED287C7C}"
However still prompted with "this file cannot be previewed because of an error with the following previewer: PDF Preview handler"
Also causes a popup box to say an internal error has occurred.
Loads fine when you double click the attachement.

Hello i got nearly the same problem. Selecting the .pdf attachment in outlook. error code says that no preview can be showed, because the needed preview isn't installed.
Server 2012 R2 as Terminalserver, Outlook 2013, newest version of adobe reader XI.
I've already checked the following:
- outlook>options>trustcenter>trustcenter settings>attachment handling .. the box disable preview is clear .. furthermore outlook>options>trustcenter>trustcenter settings>attachment handling>attachment and documentpreview .. all
boxes including pdf preview handler are filled.
- adobe reader XI>edit>presettings?>e-mail-account ... outlook is standart.
- Registryentry: "Change the AppID value to {534A1E02-D58F-44f0-B58B-36CBED287C7C}"
- also i repaired the adobe installation and i reinstalled it a few times.
- even checked the access-rights on the temp. directorys outlook uses for attachments and the users have full access.
i have no more clue what it can be..
so may you have the solution for me or at least some tips.
Thanks,
Nikolai

Error message while clicking PDF Preview of a ADOBE interactive form

Hi -
I am creating an ADOBE interactive form having Tables, few text fields and E-mail submit button. The scripting language used is FormCalc.
Whenever I am clicking on PDF Preview to see the form layout and to check other functionality, I am getting an error message:
Error message -
Error: syntax error near token '|' on line 1, column 14.
Script failed (language is formcalc; context is xfa[0].form[0].data[0].Mainpage[0].Subform3[0].Table2[0].Row1[0].RATING[0])
script=this.isnull || (this.rawvalue >= -32768 && this.rawvalue <= 32767
I checked my scripts and there is no syntax error in that. My form is also working absolutely fine except getting this error message pop up whenever I try previewing my form.
Can you please tell me, what can be the possible reason.

I tried everything, but couldn't figure out the reason for error. I wrote the script again, but the error is still coming.
Here is a part of my script. I have written this script on Email submit button in preSubmit event, to check if the RATING field value is less than or equal to 3. depending upon this condition, I am making the COMMENT field as mandatory. The same script is repeated for all the RATING & COMMENT fields.
if (data.GyanMainBodyPage.Subform2.Table1.Row1.RATING1 <= 3)
then
              data.GyanMainBodyPage.Subform2.Table1.Row1.COMMENT1.mandatory = "error"
              data.GyanMainBodyPage.Subform2.Table1.Row1.COMMENT1.mandatoryMessage = "Please fill corresponding comment"
else
              data.GyanMainBodyPage.Subform2.Table1.Row1.COMMENT1.mandatory = "disabled"
endif

Does PDF conversion work Word to PDF?

I see it often says converts PDF to word. Does it work Word to PDF?

Impossible to say without knowing full details about how you made the conversions before and what happens when you try now.

I want to use my Macbook Air 2011 as an external disk for my iMac 2011. I connected the two with a Thunderbolt cable and when starting the MacBook Air I pressed "T" and it worked except with Office documents. Can anybody help?

I want to use my MacBook Air as an external disk to my iMac. I talked to Apple care and we solved it by connecting a Thunderbolt cable between the two computers. I then turn on the MacBook Air while pressing the "T" and it works. I can sit and work on my iMac and grab/change/save the files that are in my MacBook Air EXCEPT for the Microsoft Office files. I called Microsoft and they can't solve it. They say it might be a problem with the Thunderbolt cable. Has anybody have this problem?
Both computers are 2011 and they both have Office 2011.
Thanks in advance,
Alejandra

For Word it says "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters (for example, /)"
For Excel it says "the file could not be found. Check te spelling of the filename, and verify that the file location is correct. If you are trying to open the file from your list of most recently used files on the File menu, make sure hat the file has not been renamed, moved or deleted.
I tried this with many different documents, and I always get the same message.

Safari 7.0.4 will not allow Acrobat to open PDF files, Works ok with Chrome?

I cannot open PDF files with Acrobat using Safari 7.0.4
No problem if I use Chrome
Help

OK I will try to elaborate this time with pictures so it is clear what I am asking and what the issue I am facing is.
The specific option I want to be able to use from within the Adobe Acrobat Pro user interface is
File\Create\Batch Create Multiple Files
When I select that menu item a floating tool bar thing pops up that I can drag and drop files onto.
If I drag excel or powerpoint documents onto it and press OK it converts them fine. If I drag MS word documents into it the documents appear in the list but when I click OK it says no files processed.
In the process of troubleshooting I also tried using the Add Files button. That is when I discovered that MS word documents (*.doc, *.docx) are not showing up in the list of supported file types.
The same thing happens when I try converting a single file using the File\Create\Create PDF From File menu item. Just like above the MS word documents do not show up in the list of supported file types.
Looking in my registry entries as suggested by the article linked to by one of the posters above I can see both *.doc and *.docx types registered in the correct place.
Unless I can use the batch convert command as intended by the time my trial period runs out in 13 days I cannot justify buying this software. If converting the documents one at a time was acceptable I would just use Save As PDF from within MS Word which works just fine. I need the batch convert function so I can convert my whole library of word documents to PDF at once.
Any further assistance greatly appreciated!
Regards,
Gray

32 bit switch not working Mac with CS5

I have a couple of friends that are having an issue with Mac OS and CS5. As you know , we should be able to switch using teh Get Info and activate the 32 bit switch. It looks like it works, but every time PS starts up it starts in 64 bit. This is happening on both a SL and Lion version of OS. Any ideas other than trash prefs? thanks. We have done exhustive repair disk permissions, etc so I am a bit stuck on what might be the cause.

We're having the same issue thru our support portal where we've had a dozen or so
in the last month where CS5.x won't open in 32 bit even though the 32 bit switch is
checked in the Get Info dialog. Repairing disk permissions, creating a new admin,
deleting PS prefs, changing R/W permissions on PS folders, etc., etc., ad infitum
and nothing works. A few have even re-installed CS5.x to no avail and we've seen
this issue on Snow Leopard and all versions of Lion.
And it has nothing to do with a user re-starting CS5 too quickly as some of these
systems have been running in 32 bit mode as default for several months. Also, the
issue didn't coincide with any OS X or CS5.x update that we can figure.
GM

ITunes 10.6.3 for Win7 64 bit does not work for iPad apps

I have downloaded and installed iTunes 10.6.3 64 bit for Window 7 four times - and re-installed 3 times. When it asks if I would like to repair, I way yes. This does not correct the problem. I have an iPad 2 w/ 3G and Wi-Fi.
My problem is that while the iTunes on my Windows PC (running Windows 7 Professional, w/Service Pack 1 - 64-bit) will start, and will show my iPad when the iPad is connected, when I click on the iPad listing, and then on the Apps tab - this feature is basically unusable. This screen shows the basic Home Screen - with all icons dimmed, and then smaller versions along the right side of the basic home screen and my 2 others I've created.
1. All of the home screens shown - and all icons - are dimmed.
2. There is no list of apps along the left side.
3. Clicking on any of the home screens or on any of the icons does nothing.
Therefore I'm not able to choose any apps to sync from the iPad to the PC - nor am I able to re-position any of the apps from one screen to another.
4. Clicking on the Sync Apps button on top left - says "All existing apps and their data on the iPad will be replaced with apps from this (the PC's) iTunes Library. In other words, the only thing I can do is sync from my PC to the iPad - thereby wiping out any new apps on the iPad.
5. Clicking on the Sync button in the lower left does nothing.
So basically, there is no syncing from my iPad to the PC -- period.
HELP!!!
(Oh - also when I connect my iPad, it says there is an update to the 5.1 operating system and would I like to update, but when I say Yes, it warns that I have purchased software on the iPad that has not yet been transferred to iTunes and I should do that first. But of course, since I can't sync, I can't do that first.)

I've also got a similar problem. I upgraded yesterday & today I find (mainly with previously purchased tracks) that iTunes only playes about 51sec of a track. The whole track plays when using "Quicktime" but this doesn't help me when I'm trying to put together a playlist.
Can anyone out the help?

IE-11- Barcode font- not viewable in preview - worked fine with IE9

I have a website that allows users to preview and print cover sheet that has barcode font.
<form method="post" action="SearchPage.aspx?Parameter1=6&BarcodeFontName_DocumentID=Free+3+of+9+Extended&BarcodeFontFileName_DocumentID=FRE3OF9X.TTF&BarcodeFontSize_DocumentID=60&BarcodeFontHasTextBuiltIn_DocumentID=False"
id="form1">
Any suggestions?
On IE9,
On IE 11 ( Of course, after installing fonts)

Hi,
f12>DOM explorer.... use the find tool to select and highlight the element that is using that font-face. The cascaded style rules are displayed on the rhs of the DT.
f12>Console tab, any blocked content is listed in the console.
f12>Emulation tab, what documentMode does your page/site use? Have you validated and corrected your markup errors? (note: the font tag is depreciated... replace with span elements)
validator.w3.org/nu
File>Properties... to determine which IE security zone your site maps to (expected internet)
Tools>Internet Options>General tab, 'Accessibility' button... there are settings for "Use font styles specified on web pages"..
Post questions about html, css and scripting for website development to
http://stackoverflow.com. If possible include a link to your website or a mashup with your questions.
Questions regarding Internet Explorer 8, 9 and 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers or to
raise a question, it's highly recommended you head on over to http://answers.microsoft.com/en-us
Rob^_^

DNS Fix Works - Except With VPN Engaged

i've added the two dns servers from opendns.com, which seems to have fixed my surfing issue, both wired and wireless (had timeout/connection dropped problems w/certain sites: google, wikipedia, et al.).
however - when i engage my vpn (HotSpot VPN, fwiw), the dns problems are back, even though the new servers are manually specified in the prefs.
any ideas?

When you connect to VPN, your DNS settings are overwritten by whatever your VPN server says.,
That's because you typically have internal hostnames that are not visible to the public and the VPN reconfigures your machine to use the internal DNS server on the other side of the VPN link.

.PDF file not downloading with .pdf extension

Hi there,
I recently received the following from a user:
Hi I downloaded the PDF copy of the Good Design plan from the link: http://www.designcouncil.org.uk/en/Design-Council/Files/System-Files/Download/ Tried a couple of times, and the link downloads a file simply called "The" and it is not recognised as a PDF I manually added the suffix.pdf and the file is intact and working but just wanted to let you know. I'm using Firefox 2.0.0.16 on Mac
The original file was called, The_Good_Design_Plan.pdf, and we have renamed it to, thegooddesignplan.pdf - it now works correctly.
I'm guessing that all .pdf files need to be named without any ascii characters within their file name for them to work properly?
We have a large number of pdf's that are named as such: 'this_is_a.pdf' - should we remove all instances of '_' to avoid the above problem in the future?
Thanks for any help or advice.
Warren Vonk
UK Design Council

We use underscores in file names all the time with no issue.
Not sure what the issue was. Might have been on the clients end.

Win7 64-bit PDF Preview works- except with PDF Forms?

Similar Messages

Maybe you are looking for