Win7 and now Server Error [2007]: "Database connection information not acce
I support a 8.3.x server with Insight plugin in use. This has worked for some time now with WinXP. The issue comes into play when the company is upgrading users to Win7 stations. First, the zero-admin (download and install setup launch) is failing. The Install window opens but doesn't seem to be able to complete. Then, when we do get the plugin installed via the manual download and install, we then reach a point where the bqy will not connect with the Server Error [2007]: "Database connection information not accessible. Processing is disabled." If we proceed from there, we'll get Server Error [6] PUB_NullArgument errors and empty "Show Values" limit boxes. So it's like the .oce information is not received on the Win7 platform - it still works fine on WinXP installations.
And, I know it can work, as the PC Support personnel were able to get this working on one PC.
Any suggestions?
Thanks,
Keith
I assume that there has been no reply to this thread. The problem still persists, with intermittent success. I hope that someone can shed some light onto the Server Error [2007]: "Database connection information not accessible. Processing is disables." message.
Thanks again,
Keith
Similar Messages
-
IR web client server(0):Database connection information not accessible.
Hi,
We upgraded our system from Hyperion 9.3 to EPM 11.1.2.2. We mainly use the reporting tools SQR production and Interactive reporting.
Using workspace as an admin if I run a BQY everything works fine but when I try to do the same as other users I get the error "server(0):Database connection information not accessible. Processing is disabled" from the
I have migrated everything form the old version and haven't changes anything since. It looks like a provisioning issue and I tried looking and comparing everything from the present production(old 9.3 system).
Did anyone else face the same issue before? Any suggestions on where to look into.
Thank you in advance.Hi ,
You have to go to my oracle support website link is : https://support.oracle.com/epmos/faces/MosIndex.jspx?_afrLoop=7929796452543&_afrWindowMode=0&_adf.ctrl-state=113hdvh7xd_4
login with your oracle ID and password you have for your company and search for the document number in the "search knowledge base" which will show up on the top right corner of the page.
The search will show you the document and you can access it.
Hope this helps. -
Hi,
Wondering if anyone knows what's going on with my Filemaker Database that will not view properly on my desktop after upgrading from 10.5 to 10.6.8 on
my MacBook Pro. Is this a Java issue? The data is all there but all I see is blank boxes when I open or click on a specific area in the database.
My Java version is SE 6 1.6.0.37-bo6-434.Let me understand:
- you have purchased named canon, which is conencted to your PC running windows xp
- downloaded driver for win xp, and canon works fine
- canon is connected to that PC via USB
- that Canon is also activated as network printer, by allowing print sharing in windows; how did you set that option?
- now, you are in Mac OS x 10.6.8, downloaded Canon driver for Mac OS X, installed it, detected printer on the network, printer was installed; was it detected as attached to that PC running win XP? or not?
or you set canon by being connected to your mac directly via USB?
Now, there are some questions you should answer as some details are missing, and your initial text is not clear. Can you print if Canon is connected directly to your mac? did you try that? if not, do it before answering. -
Recieving error 8001: Database connection could not be found
In hyperion reports 11.1.1.3 I am trying to create a new report. I created a new connection and after i created a new grid I wanted to see what is looks like. when I launched it. I recieved the error 8001: The database could not be found 8c5a0a4_13c44c8A227_-7d10 I tried other connections I recieved the same error. Just to make sure I tested an extising report and it worked fine. Can some one please tell me what I am missing and what do i need to do to get this wo work. Any help is appreciated
I logged out of Hyperion reports and logged back into the application and I had a connection with no issues
-
Error during database connection to the database : MS SQL Server 2008 R2
Hi All,
I am working with ABAP Proxy to Rec JDBC( Integrating XI with MS SQL Server 2008 R2). I am using SAP PI 7.0
I am getting error in RWB at communication channel monitoring :
Error during database connection to the database URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:microsoft:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST': SAPClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver'
I have given Connection details at Rec JDBC Communication channel as :
JDBC Driver as : com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection : jdbc:sqlserver://10.1.92.111:1433;database=XONTUSERVENTURA_ORG_TEST.
Please help me in this regard. I really appreciate your valuable information and time.
Thanks and Regards,
Ayub.
Edited by: Ayubsajjid on Feb 15, 2012 8:49 AMHi All,
Thanks for all your valuable inputs on my question...
As per all your inputs, we have to install/Deploy the below required jar files in the aii_af_jmsproviderlib.sda file
ojdbc14.jar
msbase.jar
mssqlserver.jar
msutil.jar
Can you please tell me from where we will exact this .jar file, bcoz we have search lotzz but we helpless.
We install from this link http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=21599--> we download sqljdbc_3.0.1301.101_enu file >sqljdbc_3.0>enu-->in that I find sqljdbc.jar and sqljdbc4.jar files only . I cant above said .jar files.
Please help me.
Regards,
Ayub. -
I just upgraded to iTunes version 10.6.0.40 and now I am having problems connecting to my Airport Express and I get an error message 15000. Does anyone know what that means? I am using an ethernet cable so it is not a wireless problem. Trying to find out if this is realated to the iTunes upgrade. Any ideas out there?
Sure...
See this Apple article for a Hard reset of a Factory reset.
http://support.apple.com/kb/HT3728 -
Please tell how to store jpeg images in SQL Server using NI Database Connectivity Toolset.
http://www.w3schools.com/sql/sql_datatypes.asp
You setup a field as BLOB and store the binary of the picture there. Depending on the database it can be called differently as you can see in the link, in SQL server there's even a Image datatype.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV -
Workspace Error 8001: The Database Connection could not be found
We had to reboot all our windows servers recently and since then all the database connections in the database base manager in workspace are gone.
I can see all the existing reports but cannot use any of them as I dont have any connections.
Also I cannot create any new connections
I get the error 8001: The Database Connection could not be found: 13cbd63_12b5e2a8b73_-7f8f when I try to create a new connection.
Not sure what the problem is.
Any suggestions?Hi Pat,
It loks like your Biplus relational DB is corrupted, try with those steps:
1. De-register BI+ from Shared Services (Config Utility->Hyperion Reporting and Analysis > Deregister from Shared Services)
2. Configure against the backup database (Drop and recreate tables option).
3. Re-register BI+ with Shared Services.
4. Re-deploy BI+.
5. Test Workspace and add new connections.
Regards. -
Error during database connection (JDBC)
Hello!
When I try testing my connection to MSSQL (using sender JDBC channel) in communication channel monitoring (RWB)i can read that Error explanation:
Error during database connection to the database URL 'jdbc:microsoftsqlserver://<DB_IP_ADRESS>:1433;databaseName=XXXX' using the JDBC driver 'com.microsoft.jdbc.sqlserver.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL 'jdbc:microsoftsqlserver://<DB_IP_ADRESS>:1433;databaseName=XXXX''
Before I did the communication channel configuration I did the driver instalation and deploy like in document "HowTo_ConfigExtAdapters". In Adapter Monitor (RWB) i can see the JDBC adapter instaled and started (gray square).
Any idea what is wrong?hi,
try this:
jdbc:microsoft:sqlserver://
and not
jdbc:microsoftsqlserver
Regards,
michal -
I downloaded iOS 8.2 on my iPhone 5s 32 GB and now my phone won't connect to the iTunes store, and my iTunes Match is turned off and won't turn back on... I'm trying to log in from Settings > iTunes & App Store... not working... I have reset the phone twice, tried via cell service, and rebooted my wireless router..
As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
https://www.apple.com/support/systemstatus/
Edit -
I have an iPhone 4s, and I reset the content and setting. It turned on, I chose English, Australia, and now, I am unable to connect/activate my iPhone through Wi-Fi, and for an unknown reason, it will not allow me to use cellular data or iTunes. I'm not sure of what to do. It's quite frustrating, and all I need is advice, and help. I would much appreciate it. Thank-you.
In order to download to your phone over the air, you need to be connected to WiFi.
It's possible the Internet connection through Verizon is not stable enough for the downlaod to begin (it is a very large download).
You might want to head over to Starbucks with your laptop for the afternoon and see if you can download it over their WiFi. -
hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
i tried to up date my i phone 4 to iOS 5 then it wiped my phone and now it tells me to connect to iTunes and that the iPhone is in recovery mode and when i connect it goes to preparing to install to iPhone but never goes any further how do i restore the phone
by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update. -
I updated my 4s to IOS 8 and now it won't automatically connect with my Ford SYNC. I have to turn the phone off and then on again for it to connect.
Why is this? My husband's 4s is still on IOS7 and it still connects automatically.I do not know if this will help.
For a limited time Apple will allow you to downgrade to 7.1.2. Hurry do not wait.
See brownox second post here:
Are there known problems with hdmi screen display and iOS 8?
and
http://www.gottabemobile.com/2014/09/17/downgrade-ios-8-to-ios-7/ -
I updated my iPhone 5 software and now it won't stay connected to wi-fi
I updated my iPhone 5 software and now it won't stay connected to wi-fi
Icloud uses you Apple ID. It one of the Key feature on the new ATV. Restart the ATV, if that doesn't work unplug it and restart it. It should resolve the issue
Maybe you are looking for
-
I have a G5, a laptop and an iPhone being sync'd with MobileMe. The iPhone is new last week. I have been sync'ing the two computers via MobileMe for a few months. Yesterday I noticed on the MacBook in iCal that all the event start and stop times had
-
hello i have a few problems and i hope somebody has a solution my first problem is that how can i install windows vista without using a disk drive and my second problem is that should i tick mark the option which says Install windows 7 while using bo
-
Calling Oracle Function in PHP
Hi, I'm calling a oracle function in php, the function has 1 IN parameter and 1 OUT parameter. The OUT parameter is BOOLEAN type.How to bind php variable for BOOLEAN type? Thanks. srinath.
-
How to resize the DEFAULT tablespace...
When I use "Portal Configuration Assistant" to Install Oracle Portal, I got an alert from step 5 of 6 : "The Portal Configuration Assistant has halted because it has detected that the amount of free space available in the Default tablespace is less t
-
My last computer crashed and my new computer doesn't have a disk drive. I downloaded the CS6 package, put in my serial number, but during install it is still requiring a disk. What do I do?