Win7 and Reader X - default settings for ALL users/profiles

I have a custom browser/app that opens PDF's within the app which can sometimes cause issues. I found that if I set Reader X to not open in the browser (Edit>Preferences>Internet - uncheck "Display PDF in Browser") that this does resolve most issues. My problem...when changed this only affects the current user/profile that's logged in. Potentially there can be dozens of users on these laptops. The other setting is when opening a PDF, I get the warning about Protected Mode not being able to be used due to the current configuration. I can select "Always open with Protected Mode disabled" and I no longer get the message; but again, current user/profile only.
Is there a way to set these settings for ALL users/profiles? Running Win7 (32bit) with Reader X.

I do not know why you experience this; what exactly happens when a non-admin users attempts to highlight something?
You are talking about highlighting in the same document?

Similar Messages

How to set the default settings for all users in 11.1.1.3

I have couple of questions
1. How can I change the default setting for all the users so that whenever they log in the planning takes them to the Task lists mode. Or is this a one time thing which they need to do individually ?
2. How can I set the defalut setting for all the users so that they can see the same page when they log into Workspace ?

For workspace have a read of - http://docs.oracle.com/cd/E12825_01/epm.111/bpmui_admin/assigning_default_preferences.html
For planning you can't really set it without hacking tables.
Cheers
John
http://john-goodwin.blogspot.com/

How to change settings for all users?

Hi All,
In cPro we have User Settings button. On clicking that we get a Tabstrip where you will find "User" tab.
my question is: How can we change the default settings for all users e.g setting the checkbox "Scheduling only manually" to true ?
Best Regards,
Arti.

Hi Arti,
In cProjects the authorizations can be managed either by authorization profile administration by system administrator for General authorizations or by Project specific authorizations for individual cProjects elements by Project owner.
Try the first one and I hope you will get the solution.
Regards,
Nishit Jani
Award points only if you find the information useful.

How to configure default parental settings for all users (10.7)?

Hello,
I've made a silent installation of iTunes using MSI files and it works well.
I need to enable parental controls and configure it. Users must be preventing of changing these settings.
At the end of the iTunes installation I automatically created registry keys :
[HKEY_LOCAL_MACHINE\SOFTWARE\Apple Computer, Inc.\iTunes\Parental Controls]
"AdminFlags"=dword:001b7ac5
"AdminMoviesLimit"=dword:000000c8
"AdminTVShowsLimit"=dword:000001f4
"AdminRatingSystemID"=dword:0000000b
"AdminGamesLimit"=dword:0000012c
According to http://support.apple.com/kb/HT2102 it is the procedure to set default parental settings for all users and to lock these settings.
When iTunes is first launched, parental settings are not set nor locked.
I use iTunes 64 bits on Windows 7 64 bits.
Where is the mistake?
Thanks in advance.

You can set up a system cache for sharing jars: See here: http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/enterprise_config.03.06.html

Set a default layout for all users via DIAPI

Hello everyone,
I am attempting to set a default report for all users/business partners using the DI-API.
I can accomplish this in the B1 application via Tools> Layout Designer...>Set as Default
If there are entries in the RDFL table for this layout, I am prompted to delete these entries and set this layout as the default for all users/BP's
Based on the SDK Documentation, the following code should accomplish the same thing via the DI-API
(stripped down for clarity)
Dim oDefaultReportParams As DefaultReportParams
oDefaultReportParams = oLayoutService.GetDataInterface(ReportLayoutsServiceDataInterfaces.rlsdiDefaultReportParams)
oDefaultReportParams.LayoutCode = sMyLayoutCode
oDefaultReportParams.ReportCode = sMyReportCode
Me.oLayoutService.SetDefaultReport(oDefaultReportParams)
Code executes fine, but it doesn't have the expected impact on settings. The above code adds an entry to the RDFL table rather than changing the DfltReport field in the RTYP table like I expected, so instead of setting the default report globally for all bps/users, its adding an entry to the RDFL table to set the value for a specific user/bp
I experimented by including and setting the following properties to every combination I could think of with the same results
oDefaultReportParams.UserID = 'tried 1, 0, -1
oDefaultReportParams.CardCode = 'tried "", "0", "-1"
Am I misunderstanding the API, or using the wrong objects/calls...? If all else fails I could accomplish this via the UI-API instead, but the application was intended to be a stand alone app that didn't rely on SAP B1 application running, so any help or suggestions would be much appreciated.
Thanks!

Hi,
Please repost at SDK forum to get quick response. Close this thread here with helpful answer.
Thanks.

Set default password for all users including csv file

I would like to set the default password for all users
including the ones imported in the csv file?
Also now the default passwrd in set to the email address. How
do i change that setting to the "login" setting in the csv file so
those users can loin with that password?
Kinda the same question but do yuo get the idea?
Thank you,
Chip

You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
http://www.rubicode.com/Software/RCDefaultApp/

Set default application for *all* users

Hello people, my 1st post here, so forgive me for possible imprecisions, ambiguity, inappropriateness....
When I search how to set/change the default app for opening some type of file I always find the answer "through the getinfo". But doing that, I only change the default application for the current user.
I want to do that for all users of my mac, without repeating the getinfo process for each of them.
Is there any adminstrative tools for doing that?
Thank you.

You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
http://www.rubicode.com/Software/RCDefaultApp/

Security settings for all users

I recently developed a document that requires digital signatures and have been testing it. The only downside is that when a user opens the document, Adobe prompts for the installation of new security settings, and it installs it for that user only. I need to add a registry key to the new security settings, but it is only available to be added to the current user hive. Does anyone know how to install the new settings for all users?
Here is the registry key I need to add.
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cPubSec]
"bSelfSignCertGen"=dword:00000000
Im using Adobe Reader 9.3 and Win XP.
Any help would be terrific!
Thanks.

Hi,
There are really two separate issues. First, is Adobe pushing updates to the Acrobat Address Book (i.e. adding certificates as trust anchors) and the second issue is how you can push your own update to disable the creation of self-signed digital IDs. Although the two issues share an underlying mechanism, they are separate and you cannot leverage one for the other.
First issue first. Adobe has entered into partnership with certain Certificate Authorities and has created a mechanism to add their certificates to the Acrobat Address Book (aka Manage Trusted Identities) using http to send a copy of the Security Settings file that contains only digital IDs. There are two ways to trigger the download process. One is to go into the Preferences, select Trust Manager, and click the Update Now button in the Automatic Updates group box. The other method is to load the DigSig plug-in (beginning with Acrobat 9, plug-ins no longer load a launch in order to speed up the launch process). As I'm sure you have deduced, opening a file with a signature field cause the DigSig plug-in to load which in turn triggers the automatic download. The reason we have limited the automatic download to DigSig being loaded is because the vast majority of people viewing PDFs are not using the digital signature functionality (much to my personal chagrin because the more people use digital signatures, the better my job security ) and we didn't want to bother them with an update they would never need. People already complain that there are too many updates, and we are trying to limit the irritability factor. To close the loop on this function, once the download process has been triggered the Acrobat check two more things before it does the update, 1) has it been a month since I checked and, 2) if it has been a month is there a new file to download. This way we are not pestering people with unneeded updates, or if they do need the update, at least not too often. And finally, Address Book management has to be on a per user basis. A certificate that you may elect to trust could be a certificate that the next person want to specifically keep untrusted. The Windows Certificate Store, Mac Keychain and Firefox Certificate Manager all work on a per user basis.
That brings us to what you would like to do. The good news is you can use the Export Security Settings featrue to create a distributable file that will set the preference. The real question is how will you distribute the file, but before we get to that, here is how to create the file.
With Acrobat closed, set the registry setting you noted in the message above
Launch Acrobat
Select the Advanced > Security > Export Security Settings menu item
Click the Deselect All button on the Export Security Settings dialog
Select the Signing Preferences Settings checkbox
Click the OK button on the Export Security Settings dialog
Select Signature Creation Settings and note "Allow creation of self-signed Digital IDs" is set to No
Click the Export button on the toolbar
Follow the on screen dialogs. You don't have to encrypt the file, but you must sign it with a certifying signature
At this point you have the file available for distribution. You could e-mail it to your intended recipients with import instructions, or you could post if for download, or you could set the Preference the to automatically push the file from a server. To check this feature out select the Edit > Preferences menu item and then select Security from the Categories list box. You would need to select the Load security settings from a server checkbox and then set up the URL. As an aside, you can also export these settings by selecting the Automatic Update Settings checkbox on the Export Security Settings dialog noted in the bullet points above. You have a chicken and egg problem in that you have to get the users to first manually import the file in order to set up the automatic import. That I can't help you with, you're just going to have to decide what works best for you.
Good luck,
Steve

How to set the same General settings for all users

Hi Experts,
How can i set the same general settings for all users e.g. marking the checkbox "Display header" to true for all users? General settings are possible under User Settings Button.
Regards,
Arti.

Hi Arti!
You can default user settings in a PFCG role, in the "personalization" tab.
If you have a PFCG role that is common to all your users, you can set the default values here.
However it does not prevent them to change these settings later, except if you modify the "user settings" fields properties in cProjects application.
Matthias

How do you set default programs for all users when deploying Windows 8.1?

I have my Windows 8.1 image set up the way I want including the start screen, theme, etc. But how can I set the default programs for all users. Most of out computers are non-touch and I want the desktop apps (e.g. Windows Photo Viewer), not the store apps
to be the default for opening pictures, videos, etc. Can that be done?

Great question, this has been bugging me too!
So, I did some research by using "Set Default Programs" app in Windows 8. Then I ran the super ProcMon.exe tool from Sysinternals.com <Thanks Mark!>
After filtering out the junk, I could see some *interesting* writes to the registry:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserChoice]
"Hash"="57y87/ogggU="
"ProgId"="PhotoViewer.FileAssoc.Jpeg"
But the "Hash" part had me concerned. I did some internet searching for the hash, and came across a post and a pointer to a blog with some answers. This is both good news and bad.
Background:
One of the problems with Windows XP is that any program can come in and party on the entire system. No, I don't want you to put a shortcut on the desktop, install a crappy IE Toolbar, and change the default file association for *.jpg files to your app, I
just wanted to play a stupid game. Since Windows 7, Microsoft has been attempting to block that functionality from the stupid applications, and give them back to the user. Take note of the last line in the ITaskbarList3 interface:
Applications cannot programmatically pin themselves to the taskbar. That functionality is reserved strictly for the user.
Of course that sucks for us IT Pros who may wish to create *default* working environments for corporate images, but there are some tricks we can do.
Solution:
This blog appears to have the answer:
http://blogs.technet.com/b/mrmlcgn/archive/2013/02/26/windows-8-associate-a-file-type-or-protocol-with-a-specific-app-using-a-gpo-e-g-default-mail-client-for-mailto-protocol.aspx
New for Windows 8 is a dism command: /Get-DefaultAppAssociations that allows you to export a control case from a known good computer. Microsoft the supports importing the exported xml file via GPO. For example, before I changed the file association, .AVI
was pointing to the Modern App, after the change the /export-DefaultAppAssociations shows change to the new app:
From:
<Association Identifier=".avi" ProgId="AppXhjhjmgrfm2d7rd026az898dy2p1pcsyt" ApplicationName="Video" />
To:
<Association Identifier=".avi" ProgId="VLC.avi" ApplicationName="VLC media player" />
I am still doing some investigation to see if a GPO is required, or if you can inject the association into a local user account. Also, if you do have some Modern Windows 8 Touch Tablets, it would recomend keeping most of the Modern App defaults in place,
perhaps seperate GPO's for Desktops/Laptops vs Tablets?
-k
Keith Garner - keithga.wordpress.com

Setting Default Preferences for All Users in Crystal Reports Server 2008 v1

We are currently looking to set the default preferences in the CMC for all of our users.
I did locate this page Link: [How to set default preferences for all users in Infoview 3.1/CRS 2008]
The first part of the thread did seem promising but I am unable to find the sample .jsp code that people recommended.
I would assume that this scenario is common enough that someone knows a way to set universal preference defaults.
Thank you

I thought I could just run it too but when I attempt to I get a Windows Script Host error:
Script: C:\User Prefs.vbs
Line: 1
Char: 1
Error: Expected statement
Code: 800A0400
Source: Microsoft VBScript compilation error.
I noticed the first most line seems to be markup for a web interface though I am not familiar with vbs so I may be wrong. I used the publishing wizard to put the script on the CMC to attempt to run it through the CMC but it still does not work.

CMDLET commands regarding setting a default font for all users using OWA on an exchange 2010 platform

HI,
We are running Exchange 2010 and are migrating users from 2003 to 2010 with no problems. The client has asked me to set OWA font to LuidaSans which I can do for individuals with no problems. However, when I try and run the following command
Get-Mailbox -Resultsize Unlimited | Set-MailboxMessageConfiguration -LucidaSans but then got a message to state
"property composefontname can't be set on this object becuase it requires the object to have version 0.1 <8.0.535.0> or later. The object's currant version is 0.0 <6.5.6500.0>"
What object is this reffered to? Can anyone help please?
Thanks
Paul

Hi,
To set a default font for all users, you can use this command: -
Get-Mailbox | Set-MailboxMessageConfiguration -DefaultFontName "Trebuchet"
You can use any font style in place of “Trebuchet”.
I hope this information will be helpful for you.
Thanks and regards
Ashish@S
Ashish@V

Update hosts file and Change proxy settings for all users on Mac

I am in a large environment with many Mac users. We have a Windows based proxy server that we are switching over within a few weeks. So far we are manually having to go to each Mac and change the proxy settings under the users account. This is a very long and painstaking process as users are on vacation etc. and our cutoff date is fast approaching for the old proxy.
we also are having to log into each workstation as administrator go into the terminal and so sudo passwd root then change the password then do sudo vi /etc/hosts to edit the hosts file.
Is there a way to change the proxy server setting for safari and firefox globally without having to log in as each user on the Mac ?
Or is there an automated way through a script that the users can run ?
These macs authenticate to active directory. They do not have a mac server but I was told to post this question here versus the desktop area.

Most browsers include an [automatic proxy configuration (PAC) mechanism|http://en.wikipedia.org/wiki/Proxy_auto-config] and the transparent configuration of proxies, and Safari and Firefox are no different here.
The usual approach here is to have folks visit a site and select the PAC file, or to push the file out. Here is a comfiguration example from [UConn|http://helpdesk.uconn.edu/trouble/proxy/autoprox.html], and another from [Rice|http://proxy.rice.edu/setup.php], and there are others around and visible via Google.
The [pactester|http://code.google.com/p/pactester> tool might be useful, too.
If y'all get some DNS entries set up (various web browsers have [Web Proxy Auto Discovery (WPAD)|http://en.wikipedia.org/wiki/WebProxy_AutodiscoveryProtocol], when last I checked [Safari needed a little help|http://www.macosxhints.com/article.php?story=20090711031033128]) and have your firewall raise an appropriate diagnostic page, you won't have to go through this again, either.
None of this stuff is particularly specific to Mac OS X or to Safari; the PAC stuff is fairly generic, and WPAD is used with various boxes. (Try Safari with WPAD, but you might still need to reference that PAC file. And if you do, using WPAD-compliant naming would probably be a reasonable approach.)
The hosts files? You're really still using those? Any chance you can get real DNS working? That's a whole lot less work, and now is the time to deploy that; if you're going to mess with everything, then you can use that effort and that requirement to (also) move forward in your networking capabilities.

Make firefox default browser for all users without firefox checking for default browser

Hi,
we have 2 citrix servers in the same farm . We want to make firefox the default browser for all of our users.We also want to ignore the settings that they decide themselves influencing the default browser. 
Now the citrix forum suggested that i made a gpo that edits the folowing register keys:
HKCR\http\shell\open\command Change the value in the default key to firefox.exe location. 
HKCR\http\shell\open\ddeexec Change the value in the default key to Firefox HKCR\https\shell\open\command Change the value in the default key to firefox.exe location. 
HKCR\https\shell\open\ddeexec Change the value in the default key to Firefox
so i did that , and all our links now open through firefox. 
However we still get the question to make firefox our default browser while it already is defined as default browser since it opens links using firefox.
the 2nd strange thing we encountered is when we open pdf's using firefox , firefox opens but the pdf's won't open untill we make firefox default browser using the provided popup window when we start firefox 
i have googled this for days now without a proper answer . i even tried to run the "firefox.exe -silent -setDefaultBrowser" command to fix it on my personal profile without any luck.that's why i am relying on your answer

Just in case, check this article for the missing information
[[Setting Firefox as the default browser does not work - What to do]]

Setting automatic update settings for all users

Hello all,
I'm trying to roll out Quicktime 7.6 to our corporate desktops with the automatic update feature within Quicktime disabled. In past installs we were able to make the setting change and then copy the quicktime.qtp file to the "C:\Documents and Settings\All Users\Application Data\Apple Computer\quicktime" directory on all the computers and all would be good. However with 7.6 is appears this file is now housed under the individual user's profile. Is there a way to make this a global setting for all users logging in to a pc?
Thanks in advance!
KC

We have a similar problem in a High School, using Windows XP Pro, QT 7.x and Active Directory. While going to a Spanish Exam web page that uses QT, the students get locked into an auto update process. As restricted users, they can neither abort or accept the update, and are unable to complete the exam. We have found that unchecking the preference for auto update as an admin user does not uncheck it for anyone else. Under C:\Documents and Settings, there is no folder for Apple Software except for myself, once I have opened the QT preferences. I assume that Apple has hidden the location of the default preference to force updating, without regard to how that would work in a locked-down environment. It sure creates havoc when 30 students sit down for a timed and graded online exam!! Any answers out there?

Win7 and Reader X - default settings for ALL users/profiles

Similar Messages

Maybe you are looking for