Win7/ iTunes 8 and 9 = Large, fonts, unreadable text

I have this same issue in iTunes 8 and 9.
In short.. something is wrong with the fonts, and I cannot read lots of on-screen text.
Here's but one example of my issue..
http://i360.photobucket.com/albums/oo47/jeremym302/itunes1.png
Thoughts?

FrankBobandy wrote:
well that just seems weird that itunes wouldnt have these capabilities if they want me to port all my stuff to them, make them a bit more diverse and useful as a media outlet.
Can't be of much help. iTunes has been the only media manager I've used since SoundJam (which was really it's direct ancestor as Apple bought it and turned it into iTunes) so I've never really had a problem with moving things to iTunes.
so i have my itunes library on a brand new time capsule, and some albums lag upto 2 minutes to go form one song to the next...the same album every time even if i was listening to other songs in itunes that play flawlessly and accurately.
Again, outside my knowledge as I don't have a Time Capsule. To be sure to get an answer to that question, I'd suggest you start a new thread with a descriptive title so that people who do know will see it. They may not look at a post about tagging. You may also want to post it over in the Airport and Time Capsule forum.
Sorry I couldn't be of more assistance.
Best of luck.

Similar Messages

[SOLVED] firefox3 : huge icons and large fonts with big pixels issue

hi all,
i have a weird issue regarding firefox3b3 (and firefox3b4 from mozilla.org as well). Firefox2.0.12 is running fine, but the beta of 3 has insanely huge fonts and icons so big that I cannot use it properly.
I have removed my .mozilla folder but that did not help, i have reinstalled it, downloaded the true ff3b4 from mozilla.org but all the same problem. On windows and solaris ff3 is running fine. Does anyone know what is doing this and how to fix it? icons are so large that it is even starting to get pixelated. I also tried <ctrl> - and <ctrl>/ and <ctrl>0 but none of those help either.
thanks,
stefan.
Last edited by stefan1975 (2008-03-02 19:26:16)

i have finally found a solution that Really works on the Ubuntu forum, i still had the same issue on my laptop (why it behaves different from my desktop i dont know, maybe because hwd -xs didnt make a 1920x1200 modeline in xorg.conf) but the following acutally works:
1) Go to about:config in ff3
2) Search "dpi". The value may be set to -1 (maybe auto-detection)
3) Change it to 96 (default dpi)
4) Enjoy Firefox 3!!!
stefan

I was cleaning my computer up one day and I think I may have deleted something pertaining to iTunes and now it won't let me update to the newest version. It won't even let me uninstall iTunes or bonjour.

I need help!

What error messages are you getting when you try to uninstall iTunes and Bonjour? (Precise text, please.)

When printing Apple articles on a Mac 10.7, some of the text is lost and the font is larger on pages 2 and on.

When I print Apple support articles, the font size increases from page one to subsequent pages and some of the text is lost. This is true on Canon i960 and MG 8120 printers. It does not happen on other multi page documents. It is only true with Firefox. Safari works fine.

Please provide a public URL or reduced test case that exhibits this issue.
Does it appear correct in Print Preview?

How to keep alignment in Windows LARGE and SMALL fonts

For years, I fought with LabVIEW, trying to keep things looking decent in both Windows LARGE and SMALL font sizes.
By this, I mean Settings - Control Panels - Display - Settings - Advanced - General - Font Size
I love to use large fonts - I run my display at 1600x1200 and it just looks better.
But if you plop an indicator on a panel in LARGE fonts, save it, then open it with SMALL fonts in effect, it looks horrible.
N.I. Doesn't care about this - just look at how ugly their own examples get when viewed in LARGE fonts.
So I developed a method to make the bottom of the label text line up with the bottom of the numerical text, whether in LARGE fonts or SMALL.
Click here for examples. Basically, I turn OFF the SIZE to TEXT attribute and right-justify the label (if on the left of the numeric).
This works OK, except I have just discovered that it depends on the text being the default size.
If I have a 17-pt numeric with a 17-point label, then they both appear as 13-pt when I switch to SMALL fonts - great -- they're still aligned.
But if I have a 17-point numeric with a 16-pt label, when I switch to SMALL, the numeric shrinks to 13, but the label stays at 16, and is thus vertically misaligned with the numeric.
So how can I have a 17-pt numeric with a 13-pt label, and have them BOTH shrink when I switch to SMALL fonts?
I suppose I could use property nodes, and detect the switch myself, but I have 50+ of these on a single VI to do - that would be ugly to watch the labels jumping around.
I suppose I could have two VIs - one for LARGE fonts and one for SMALL, but I don't want to duplicate th
e code.
Any other ideas?
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

It is true that we don't have a
solution. It isn't that we don't care, but the solution choices stink.
Well, I'll stand by my opinion that N.I. doesn't care - when using the default app font, there *-IS-* a solution - the link in my original post points to a page that I show my employees on how to solve the problem. It is solvable, for the case of using the default font and size. Yet N.I. uses the default font and size, but LOOK HOW THEIR EXAMPLES APPEAR (see attached files). This is how the example software looks, out of the box. These are not ancient examples, either.
It is NOT my opinion that, because there apparently is no solution for non-standard sizes, the stuff looking ugly is NI's fault.
But when a solution DOES exist for standard sizes, why they don't apply it is beyond me. Even some of the LabVIEW dialogs suffer from this.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks
Attachments:
ChartsPict.png ‏22 KB
MenusPict.png ‏15 KB
GraphPicts.png ‏31 KB

Acrobat 9 - hyper link issue and print in larger font

I am using Acrobat 9 and have two issues :
When I try to convert a web page to pdf file i.e. through the print command in FF, the text links are there in the new file but without the underlying hyper links ?
How can I print the files with a larger font. It is okay for seeing it on monitor but too small for me when I print.
thanks.

Do as AbhigyanModi suggests or use the Adobe Acrobat plugin that should be in your web browser if you're using Internet Explorer. This happened because you "printed" to convet to PDF. You have to use either AbhigyanModi method or use the Internet Explorer plugin to save active hyperlinks.
In terms of the font size -- You can set up the web capture preferences first. Explore the menu that AbhigyanModi suggests or use the built in help. It's there for a reason.

I need to input text from PC to iPad with large font size. Too much to ask?

Works well with PC to PC using just software likge Windows Live Messenger, but not with iPad because I haven't seen a Messenger app for iPad that can display large fonts or has custom font size option. They all use small font size that can't be changed.
I've also tried many VNC apps by writing the text in my PC to notepad and using the VNC to display the large text for iPad. Probelm is VNC's wont work well with 3G.
Is this really too much to ask from iPad?
If some app developer reads this, I'll buy an app for 50$ that has white background and can receive text sent from PC with custom font sizes. Doesn't have to have any other features. Just receive text from PC using the existing IM softwares like Windows Live etc or simple custom software.

I was wondering if you could help me out with my current situation. It seems like it is similar to your previous I/O delima. I think I might have to parse the data, but i dont know how to do that yet. I basically have to put the information from one text file into a database, and it is formatted in one way, and i need to format it a different way that SQL statements can read. Here are 2 entries of about 12,000 that i have in one text file:
1
UI - 4
TI - 117-28
Y2 - -32676
RP - NOT IN FILE
SO - <None Specified> -1 ;():
2
UI - 11721
TI - The mechanism of genetic recombination in Escherichia coli.
MH - mechanism
MH - recombination
MH - Escherichia coli
RP - NOT IN FILE
SO - Cold Spring Harb Symp Quant Biol 1953 ;18():75-93
This is only 2 of the records, You notice that the record number is first, followed by another field ex. (UI), which then the data stored in that field are after the "-"
Thanks for your help

My wife has vision problems. She has trouble reading her text when composing in 14 point font. How can she increase the font when composing without emailing out a larger font?

My wife has vision problems. She has trouble reading her text when composing in 14 point font. How can she increase the font when composing without emailing out a larger font?

Option + Command + 8 turns this function On and Off.

I replaced my iPhone with a Galaxy 5 and am not receiving all of my text messages. The sales person told me to remove my phone number from iTunes to stop this from happening. Is that true? What does iTunes have to do with text messages?

I replaced my iPhone with a Samsung Galaxy5 and I am not receiving all of my text messages now. The rep at the store told me to go to iTunes and take my phone # off of the account and that would fix the problem. Is that true? What does iTunes have to do with text messages anyway?

You need to remove your phone number from the iMessage system.
Read here: http://support.apple.com/kb/ts5185
~Lyssa

Why each time I try to save my day's work,version WITH mark-ups and version w/o, does it say "you have placed a large amount of text on clipboard do you want to access this? What is clipboard and how can I just save my work in its proper file?

I don't get this clipboard thing! I have created two files, one for the MS with mark-ups, and one for the unmarred version, each living in their own spot in my "house." It seems to be merging the two versions and I have to go in and re-paste and then it always says "you have placed a large amount of text on clipboard do you want to be able to access this?" and it prompts me to say no but I am afraid I'll lose my day's work so I just tap cancel. I highlight the day's revision and select "copy" to paste into the unmarked doc. before I save on the marked up or working doc. It is when I try to close that one that the clipboard issue pops up. What can you tell be about saving doc. in two places and how to NOT get it on clipboard? Thanks! I am not super computer savvy so layperson's language much appreciated!

Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert

How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text?

How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text? Please help! I'm technologically challenged.

Most forms (99% or more) are created for simple text input, where you cannot change anything.
The creator of the form could allow Rich Text input (which allows you to change font, text size, color, etc.), but frankly I have never seen such a form, and I wouldn't know how they look. But I'm sure they would show some kind of controls to alter the text appearance.

HT1386 I have Mac itunes and a touch 2G. My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes. The music and videos sync, but apps & podcast will not. All checked to syn

I have Mac itunes and a touch 2G. My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes. The music and videos sync to the 4G, but apps & podcast will not. All are checked to sync. During sync, it gets to "determining apps to sync" then immediately goes to "finished syncing". No apps or podcasts from my Mac itunes are on the touch 4G.

You can only sync to one iTunes library but you can manage music and videos among different computer/libraries.
It appears that you are trying to sync with a different library.
- If you want to make the Mac you syncing computer:
--- Connect the iPod to the computer and make a backup by:
iOS: How to back up
--- Restore the iPod from that backup. Note that synced media like apps and music are not in included in the backup.

Why Acrobat x professional is changing the text formatting specifically the font family and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exact

Why Acrobat x professional is changing the text formatting specifically the font family and the font size of the text in my pdf on exporting it to Microsoft word file format ?How should i stop Acrobat x professional from doing that so that i get an exactly same word file on exporting it from its pdf counterpart?

I was testing the preciseness & efficiency of Adobe acrobat x professional's doc conversion capabilities. As i have to take a document editing project in future which is going to need lot of pdf to word and vice versa conversions . What I did was I created a test word document converted into a pdf using a pdf maker in my word 2007 , Acrobat did convert the document from word to pdf keeping everything in the source file intact , However when i tried the other way round and attempted to convert the same pdf to word 2007 file format I lost my formatting ?So the font that I used to create the pdf are the ones taken from word 2007 which i believe is using the fonts that are installed in my computer. Any suggestions on how to preserve the formatting of the document after converting it from pdf to word file format?
Regards
Mike

My classic has come up with a sreen which 5 lins of text (in large font) Line 1 says 5 in 1 line 2 sdrampass L3 chksum any ideas I've tried the MENU CENTRE BUTTON with no joy HELP

My classic has come up with a screen which has 5 lines of text (in large font) Line 1 says 5 in 1 Line 2 sdrampass L3 chksum Any ideas ? I've tried the MENU + CENTRE BUTTON with no joy HELP

Hi starbugdriver,
I recommend trying the iPod classic troubleshooting assistant here:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Have a good one!
- Ari

How do I save a font and it's size and color in a text box as a default

I am using Adobe Acrobat XI for Mac and can't figure out how to set a default font for text boxes. I don't seem to be able to access the properties to set the default by highlighting a properly formatted text box and pressing ctrl-e. Is there another key combination for Mac? Or another method for setting defaults? I'm finding I have to set the font, size and color every time I open a new Acrobat doc and want to add a text box. Also, the choices are not even saving with the document. The fonts already typed save correctly, but on reopening, I have to reset if I want to add more text.
Thanks in advance for any help,
Tom Carlson

Thanks for the suggestions. I've got a Logitech G700S Mouse with a right click button, so right-clicking isn't an issue. Unfortunately, the I can't seem to find the menu to "Use Current Properties as New Defaults." I may not have described the problem correctly.
I am adding text to a pre-existing pdf document, not creating a form. I would like to be able to set a default font, size and color for text, so that when I enter text in a text box onto the pdf document, it has those properties. If I select the text box that is properly formatted (not the text, but the box) and right click, the only choices I get are:
Cut
Copy
Delete
Select All
Deselect All
Arrange>
Edit Using>
So I gues my question is if one can even format a text box as a default or a "style" or the like. I tried setting a default font, size and color for "comments" also in the Acrobat preferences, but even that didn't seem to stick when I opened a new doc. This all may just be a Mac / Mavericks interaction flaw. Anybody have any other ideas?
Tom

Win7/ iTunes 8 and 9 = Large, fonts, unreadable text

Similar Messages

Maybe you are looking for