WIN7 Starter drivers for deskjet450ci will not install successfully.

Hi,
HP web site tells me WIN7 Starter drivers include those for Deskjet 450ci mobile printer, but they won't install. Error just tells me that installation was unsuccessful, with no suggestions for a fix. Could sure use some fresh ideas! Thanks!

Hi,
Did you follow these steps to install the printer?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01874725&lc=en#N161
If you experience any error by following these steps try following this document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02663702&lc=en&cc=us&dlc=en
If there is still no difference try using another USB cable and check for any change, ensure the USB is not longer than 2-3 meters long, as well be sure to connect it directly to a free USB port of your laptop and not via any USB Hub, extension or a docking station.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Avast for mac will not install unless I close safari and mail but both are closed. I turned off computer and started again but same message appears.

    avast antivirus for mac will not install unless I close safari and mail which are both off. I have shut down my imac and started again but same message when I tired to install. Help please.

    jejerry wrote:
    do you use any antivirus software ...
    In General 3rd Party AV Software is Not Required as Mac OS X tends to look after itself.
    Read Here  > https://discussions.apple.com/thread/4545776?tstart=0
    See Here  >  Antivirus Discussion

  • Update for keynote will not install...how to remove update or ignore?

    How can I ignore an update for Keynote that will not install? I also have an update for my printer that I have installed 4 times but it still shows as needing to be installed?

    Try hiding the Keynote app in the Trash where the Mac App Store can't see it. Then try to redownload it from your Purchases list. You should get the most recent version available.

  • Drivers for MX700 will not load

    I tried to use the scanner on my Pixima MX700 multifunction printer and it would not work.  I downloaded all new software from the Canon website, drivers and all and the drivers will not load.  Help.

    Hello!
    So that the Community can help you better, we will need to know the version of Windows or Mac in use, and any specific error messages you may be running into.
    If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
    Thanks and have a great day!

  • ICloud Control Panel for Windows will not install on Win 7 64-bit

    I already installed iTunes 10.5 and I downloaded the iCloud Control Panel for Windows and when I tried installing it I got the following error message:
    I cannot find a a 64-bit of iCloud (if that is what I need). The 64-bit iTunes installed ok. What am I doing wrong?

    I don't know how to answer that question, Rob, or why I would be able to. Obviously people will have different configutrations. It really just points to the question I am asking. I can only assume Adobe hasn't tested it thoroighly enough and is not making any effort to find out why, which suggests to me they don't really care enough about their users to bother. This issue has been raised often enough and nothing has been done.

  • The latest itunes for windows will not install

    I have an old PC running windows and I want to transfer my itunes songs to my ipad. I can't do this until I update iTunes but trying to update does nothing, either from iTunes or from the web page. I've tried rebooting the PC, still doesn't work. How do I get iTunes to update? Or, how do I transfer to the iPad without updating? The version of iTunes I have is older than 10.5, not sure where to find version #. Thanks!

    Hi b noir, thanks for offering to help. i documented the whole process:
    Itunes transfer from pc to ipad.
    1. Connect ipad to PC 
    2. Pc recognizes ipad as a camera, gives me list of programs to launch, not sure if this has any relevance, no itunes on list, instead its kodak easyshare, ms doc wizard, ms camera sharing, ms word,mp navagator ex, omnipage, photoshop - I ignore this screen
    3. Launch itunes, get screen, "ipad requires v 10.5 or later' go to itunes.com. I click ok
    4. I get screen, still in itunes, "a new version (10.7) is available." I click download.
    5. That screen goes away but nothing happens. No download starts.
    6. Checked itunes folder on my hard drive, no sign that anything new has downloaded
    7. Launch safari, go to itunes.com, hit download button
    8. Nothing seems to be happening.
    9. I get "thank you for downloading itunes" screen.
    10. Still nothing new in itunes folder.
    11. Get AVG screen telling me to restart my pc to finish download process.
    12. During shutdown, I get screen,"the instruction at 0x100066dd referenced memory at 0x100066dd. The instruction could not be read." Gave me options to terminate program or debug. I did not choose either. No idea if this is relevant.
    13. PC rebooted anyway.
    14. Launched itunes
    15. Got same message as before - "ipad requires v 10.5 or later' go to itunes.com. I click ok 
    16. Even though ipad is plugged in all this time, the screen that thinks the ipad is a camera does not come up this time.
    17. There is nothing to the left of the itunes interface that lists devices - this is where ipad would appear, right?
    18. Ipad appears on My Computer control panel
    19. My version of itunes is 10.3.1.55
    20. In itunes, i go to Help - Run Diagnostics - run all but Cd/Dvdtest
    21. Secure Link to Itunes store failed, everything before that is ok. I click Help. nothing happens. Store appears in itunes so I don't see why this would fail.
    22. Since help doesn't work, I move on in test. Two more fail screens: itunes helper not running, no ipad found. help brings up appropriate pages for both. Both recommend removing and reinstalling itunes.
    23. Device sync also fails.
    If it would be quickest to delete and reinstall itunes, I am willing to do that. My music would not be deleted correct? What about playlists (not as important to me).
    I also have all my music backed up to CD. It would be tedious to copy that all to ipad, but if there is a way to do it and no other option, I could do that.
    Sally

  • Flash Player 10 for IE (will not install, FIX Try this)

    OK Everyone here is how to fix Flash Player 10 Install problem
    I had the problem that Flash Player activex would not complete the install.
    I tried everything, I reinstall windows XP sp3, I reinstall IE 8
    I cleaned, uninstalled and even a tried a reg cleaner (waste of money)
    I used all the troubleshooting information from Adobe . (did not work)
    I was just about to reinstall XP and then I tried.
    Danger do not try this unless you are comfortable updating and using the registry files.
    Make back up before trying .
    This is what worked for me.
    I went to run regedit , went to HKEY_Classes_ROOT, Right Mouse click to show menu,Click on permissions
    Add the Administrator Group, then give it full rights , then Advance in same window,  Clicked the box replace permission on all child object ect. Then clicked Apply.
    This will add the Administrator group and give rights to all items in the HKEY_Classes_ROOT, which looks like what Flash Player installer is looking for.
    After that, Use the Flash uninstaller from Adobe restart computer the install Flash Player ActiveX from Adobe
    Good Luck

    Could you put all of that in an icon please ???
    They said to look at permissions.
    \                            Crazy in love,   Bob

  • Photoshop CS6 for Mac will not install. I get a list of errors. How can I resolve this?

    Hi all, I am running Mac OS 10.6.8 (Snow Leapard) on a Mac Pro Dual Core Intel Xeon with 2.66 GHz and 3 GB RAM.
    I have tried to install Photoshop CS6 from the purchased disc and again from a downloaded trial version from Adobe. Both having the exact same install errors issue. I still have CS4 loaded since I wish to run with this suite for a while before I fully switch to CS6
    Below is the summary of errors. I look forward to hearing from some one soon!!  
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF006, DF016 ... WARNING: DS012, DW016 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 6 error(s), 10 warning(s)
    WARNING: DW016: NOTE: Cannot set action to the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0
    WARNING: DW016: NOTE: Cannot set action to the payload {0256558F-A0FF-4FCF-99C2-96D2EE3201D9} Suite Shared Configuration CS6 3.0.0.0 as it is already upgraded by the payload {C346BBCF-A687-4500-BB19-EE9C2D6FF284} Suite Shared Configuration CS6 3.0.0.0
    ----------- Payload: {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0 -----------
    WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 21)
    WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 22)
    ----------- Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -----------
    WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 11)
    WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 12)
    ----------- Payload: {48623899-C152-457D-9B30-1F957332AC2F} AdobeColorPhotoshop CS6 4.0.0.0 -----------
    WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 3)
    ----------- Payload: {78E38D75-4D92-4F6E-B631-17A436BED680} AdobeColorVideoProfilesCS CS6 4.0.0.0 -----------
    WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 5)
    ----------- Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 -----------
    ERROR: DF006: The path "/Library/ScriptingAdditions/Adobe Unit Types.osax" already exists and is not a directory, Please rename or delete and retry(Seq 2255)
    ERROR: DF016: Unable to create directory "/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents" with mode 775(Seq 2255)
    ERROR: DF006: The path "/Library/ScriptingAdditions/Adobe Unit Types.osax" already exists and is not a directory, cannot create path "/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents",Please rename/delete "/Library/ScriptingAdditions/Adobe Unit Types.osax" and retry(Seq 2255)
    ERROR: DW063: Command ARKCreateDirectoryCommand failed.(Seq 2255)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Photoshop CS6 International English Language Pack_AdobePhotoshop13-en_GB: Install failed

    Try
    Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5 (should still apply to CS6)
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • Itunes for windows will not install

    SInce Christmas, I have tried installing iTunes for my Ipod shuffle. I have NIS and I've followed some instructions I found on a thread to add itunes and ipod into my programs and "permit all"- that usually freezes the computer. I wind up sending error reports to windows and cold booting the computor. I think I successfully installed both itunes and ipod into My Computer/Downloads. However- - neither via shortcut on my desktop or thru programs can I access itunes. The icon is there, and nothing happens. I am pretty sure it has to do wit NIS. In one instance I did try disabling the security and firewall features- but a lot of crap got onto my desktop. help!

    Kellie,
    remind me, did you try an EWIDO scan? Sounds like a malware problem to me. Go download EWIDO, its free and the only program that I know of that is catching the particular variant of malware that is blocking iTunes. Its a nasty bug that started showing up in October or so.
    The website is www.ewido.net/en/
    Use that scan about twice a week. It blows Mcafee and Norton out of the water.
    Good Luck.
    PS I recommend picking up LsvaSoft's AdAware SE, its free and available for free downloads on their website. It scans and removes spyware. Use that twice a week as well to maintain a healthy PC.

  • Mail Update for Mavericks will not install

    Downloaded the Mail update for Mavericks.  When I run the installer, it says my volume does not meet the requirments for this update.
    Thoughts?

    Yes. The Mail Update requires 13A603 to install.
    Allan

  • FixPack 1 for CR2008 will not install

    I'm trying to install cr2008_fp1.exe.  At some point in the installation, it's looking for CrystalReports.msi in Local Settings\Temp\RarSFX0\package.  There is no such file in that directory (only a CrystalReports.msp).
    So I popped in my 2008 install disk, and pointed it at the CrystalReports.msp found in the package directory of the CD.  The following message appears:
    The file 'D:\package\CrystalReports.msi' is not a valid installation package for the product Crystal Reports 2008.  Try to find the installation package 'CrystalReports.msi' in a folder from which you can install Crystal Reports 2008.
    So now I'm stuck.  Anyone have any ideas?
    Thanks!
    Ron Moses
    Edited by: ConEst Support on Jul 17, 2008 12:52 PM

    You need to have CR2008 Service Pack 0 installed before installing any fix packs (If you don't, your CR version number would be 12.0.0.549).
    Download SP0 from here:
    Where to download service pack 0 for CR2008

  • Updates for CS4 will not install...

    I am running CS4 on Windows 7 (64 bit).  I cannot get any updates to install.  The installation bar starts cross the window then returns to the beginning and does it again....a never ending loop.  I once heard that when I installed PS I should do it under adminiatrator permissions.  If this true....what are they talking about ?  Any help is appreciated....

    First, WHICH version of Vista 32-bit? It must be at least Home Premium, but if things started to install the first time that probably isn't the issue.
    Second, if the installer is reporting you don't have SP1 it's worth checking. Did you specifically download and install SP1? I don't know, because I don't run Vista, if SP1 would be an automatic update, or if only the security patches included in it would be automatic.
    In XP you can right-click on My Computer and select properties. On the general tab it will tell you what service packs are installed. There has to be an equivalent in Vista, so you should check and be sure SP1 is listed.
    Peter

  • Photoshop CS6 for windows will not install.

    I have already copied the lesson files to my hard drive as the book instructs, however there is no autorun screen, or even a shortcut/icon that says Adobe Photoshop, the same applies for Adobe Bridge. What am I doing wrong? I need this for a college course and have already missed an assignment because I cannot get it to work. Please help?

    Products
    Here is a link to the Student Store -- you should be eligible for a discount through your school. I don't see CS6 on there, so you may have to get the cloud instead to get the discount. (You can find out from the chat window that will show up if you stay on the page for a few minutes). If you just need Photoshop, the Photographers bundle is the best deal.

  • Adobe Photoshop Elements 11 for Mac will not install

    I have downloaded a test version of Adobe Photoshop Elements 11 but when I come to hit the install button nothing happens. I have updated Adobe Air and Application Manager and I am on Mac OS 10.8.2, any ideas?

    The Great Snorer reviewing the log files is primarily accomplished by doing a search on the words ERROR and FATAL within the log file.  If you are unable to locate the log files though then I would recommend contacting our support team and working with them directly.
    For the best assistance, I recommend our chat support at http://adobe.ly/yxj0t6.  Our chat representatives can provide a personalized experience to resolve the issue you have described.

  • Itunes 7.0 for windows will not install Error 1392

    I get an error message when i try to update to 7.0 It says could not set security file for file 'C:\documents and settings\all users\application data/apple computer/itunes/SCinfo\'.Error1392

    Hopglock,
    You have your permissions on that folder or another folder in the hierarchy set to read only permission or some other security lock down. You need to turn off read only or change security permission so that the iTunes installer can write to
    the
    C:\documents and settings\all users\application data\apple computer\itunes\SCinfo
    folder.

Maybe you are looking for