Win7 Taskbar tab previews way too small

Is there anyway to incease the size of the Win7 Taskbar tab previews? They're so small its nearly impossible to make out what page I'm trying to load.
Thanks!

There are a couple of add-ons that can assist with this, [https://addons.mozilla.org/en-US/firefox/addon/6965/ Default FullZoom Level] or [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint].

Similar Messages

  • Icons and toolbar text is way too small and hard to read (kind of fuzzy)

    The toolbars (menu bars) at the top of the screen have letters and icons and symbols that are way too small to read. Also the background color options are limited. Light black on grey is hard to read. I have tried customizing all that I can. There used to be a thing in control panel called display, and we could pick all sorts of fonts and colors for all those toolbar strips. Where did that go? I am VERY FRUSTRATED!!

    I've tried those, and have just decided to go back to 3.6. Firefox just seems to have too much input lately trying to tweak and adjust. Meanwhile, the later versions just end up looking worse and worse with each iteration. Icons too small, monochromatic tool bar, making icons harder to distinguish, and, worst of all, frequent crashes.
    Perhaps some of these problems are because I'm using XP, but I've noticed many if not all of the appearance deficiencies with my laptop running Win7. Probably the most annoying thing about later versions, though, is the inability to set memory time for history. This alone is a deal breaker for me, and ultimately, as IE has gotten better, I may just go back there.

  • Font in Menu Bar and Drop Down list way too small

    I just tried PSE 10 and was very surprised to see that Adobe did not address the problem with the font size being way too small in the menu bar and drop down list.  I cannot possibly read the font - so the program is basically unusable.  I am using a new 17inch laptop.  Is it possible that after all the complaints Adobe didn't fix this problem in PSE 10?  Are they even working on it?  I love the program but unfortunately I am going to have to switch to something else because there is no way I can read the font and thus cannot use the program at all.  Very, very disappointing.  Hopefully they are working on a fix???

    Photoshop CS5 Essential has preferences that offer users the opportunity to adjust menu bar background color as well as font size.  For example,
    "UI Font Size
    If you find that Photoshop's interface text is a little too small for comfort, you can increase its size by changing the UI Font Size option to either Medium or Large. And no, this option isn't just for old folks with poor eye sight. Working on a very high resolution monitor can make Photoshop's interface text appear very small. Personally, I like to set my font size to Large which I find helps to avoid eye strain. You'll need to close and then re-open Photoshop for the change to take effect:
    Change the font size to increase some of the text in Photoshop's interface.
    (From an article by Steve Patterson at http://www.photoshopessentials.com/basics/cs5/preferences/ .
    Why not Photoshop Elements?  ?
    Lensw

  • TS1347 Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

    Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

    Settings>General>Accessibility>Increase Contrast
    Settings>General>Accessibility>Bold Text
    are some settings that may help.
    There are other settings there ...they may not be to your liking but try them all anyways.
    But that's about all you can do for now...except to voice your opinion to Apple here:
    http://www.apple.com/feedback/ipad.html

  • HT1750 The serial #  is way too small to read!!!!  Make it BIGGER!

    The serial #  is way too small to read!!!!  Make it BIGGER!

    You are talking to users like yourself, not Apple. Try here to talk to Apple. In the meantime, if you select About This Mac in the Apple menu and then select More Info, you'll find the serial number there too. And if that is too small you can copy it just as if you were using a word processor and then paste it into a text editor and make the font bigger.

  • Help Viewer Font Size Way Too Small

    Hello,
    The font size of the adobe help viewer content is way too
    small (it looks like a 4 pt or something). I can hardly read it at
    all. Can someone please tell me how to enlarge it?
    Thanks a lot!
    Mike

    Hi Mike
    I recall that earlier incarnations of the help viewer had a
    zoom setting that would allow for this. Sadly, it seems to have
    disappeared and I'm unsure why.
    Perhaps it will be helpful to know that you may view the
    Captivate help as basic web pages? The URL is below:
    Click here
    to view
    Cheers... Rick

  • My toolbox print is way too small

    the font on my toolbox is way too small and I can't change it

    Do you mean the Firefox use interface?
    See:
    * Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/162063/

  • I bought Adobe CS6 Design Standard, however on my new laptop (3840x2160 pixel screen) the program interface is way too small and i cannot size it larger. Anyone an idea?

    I bought Adobe CS6 Design Standard, however on my new laptop (3840x2160 pixel screen) the program interface is way too small and i cannot size it larger. Anyone an idea?

    Hi,
    Is there any particular application's interface that is coming up small or is it happening with all the products?
    Cheers,
    Kartikay Sharma

  • How do I make icons bigger? All icons are way too small for speedy use. no matter what I do they remain too small. Is there a way of getting them the same size as previous versions?

    All icons, such as refresh page, back, forward, stop and home etc; are just too small for comfortable use. For now I am uninstalling Firefox 4 and going back to 3.x. even the zoom page icons are too small.

    "I had read that GarageBand or the Musical Typing there can sometimes not display properly when the resolution is changed."
    Well, did you checked GB after you changed your resolution?
    Which setting did you change to?
    You & I have the same size iMac screen. My resolution setting is 1280x800. Everything fits perfectly in the windows & on desktop including the menu bar.
    All info in my windows are showing. I did not need to adjust my browser font size settings. I am sure you are aware of the browser font size settings. I use FF & the settings are in Preferences>Content.
    In the Finder window you can enlarge the icons & fonts also.
    Finder>View>Show View Options.

  • CS3 Bridge: Preview image too small

    Hi,
    Here's what I'm using:
    Photoshop CS3: 10.0.1
    Bridge: 2.1.1.9
    ACR: 4.6.0.30
    No matter what mode I coose (lightbox, horizontal/vertical filmstrip ...), the preview image occupies a very small part of the preview pane and I find no way to resize it. The thumnail pane and the thumbnail images themselves are resizable all right.
    I tried purging the cache and that didn't help.
    Any help would be very much appreciated.
    Thanks,
    Prabal.

    Hi,
    I wanted to report another experiment that possibly points out where the problem is.
    Case 1:
    I placed the preview and content panes one above the other. Like so (preview pane at the top):
    Then I started pulling the horizontal separator between the two panes to shrink the size of the lower pane and this caused the preview image to starting to get bigger to fit the preview pane real estate space. Look at the image below (and note that the bigger image is not rendered correctly) and note that at the time of taking the screenshot, I did not yet release the horizontal separator:
    Finally, just as I released the horizontal separator bar, the image in the preview pane got resized to its initial small size:
    Any clue?
    Thanks,
    Prabal.

  • Thunderbird **Main Screen** Font is WAY TOO small - and there are no provisions to change that text size!

    I see lots and lots of complaints but NO suitable answer! Most answers don't even answer the question but instead tell how to increase MESSAGE font size - not the main screen "message list". Suggestions to change screen resolution are common but are ludicrous. One would have to change resolution every time they went in or out of Thunderbird! CTRL+ is also suggested but does not work on the message list. Creating and inserting CSS into the profile is a ridiculous suggestion for most users. And changing advanced settings is only an option for a guru - from my experience less than 10% of the folks I know would even look at the advanced settings - and less than 10% of those few would actually attempt such changes. This has been an ongoing complaint for a looong time.
    It's time someone stepped up to the plate and provided a reasonable method of changing the size of the text on this screen.
    Or do you want to limit you users to only programmer types?

    I have recently made the switch in the last week to Thunderbird from Apple Mail. I have been a Firefox user for many years. Near enough from the beginning. So far I am impressed with Thunderbird but it is lacking something that I don't get with Firefox. Font size is a big issue for me too and it's straining my already short sighted and possibly making (damaging) my eyesight more by using Thunderbird.
    Though I agree with everything you are saying. I am one of those users who would prefer to change things within thunderbird itself rather than go and install another third party addon. I by no means am a guru but I have a fairly good understanding of things and would like to learn more about the about:config side of things treading carefully. I have tweaked things in Firefox this way. and disabled some items for security reasons. I am having difficulty finding info within the Mozilla site on this side of things and have yet to go down the search engine route for research into this.
    I would like to change not only the main message list as you suggest but also the From, Subject, Reply To, To and Route content along with the Reply, Forward, Archive btns along with any other content etc, above the main message content. As well as my folders.
    I feel Thunderbird is lacking accessibility features for those with bad vision or using smaller screen sizes. What I would like is a + and - with percentage btn like in Firefox that zooms in and out the complete page in a more responsive web like way. This would greatly improve things for many users. I'm sorry Mozilla but being able to zoom in and out with a keyboard shortcut in the main message content is not good enough.

  • Bridge CS4 image Previews are too small

    In Bridge CS4 I cannot get the preview images to display anything larger than a large thumbnail view, see image below.  I have tried all of the Preferences in Edit menu (e.g. Thumbnail: do not process files larger than set to 10,000 MB, cache options are keep 100% previews in cache checked/automatically export cache to folders when possible checked/cache size slider is set to 50%, software render has been checked/unchecked/generate monitor size previews checked).  None of these options change anything for the size of the image preview.  I have a DX10.1 ATI Radeon HD4890 XOC 1GB, so my video card is not the issue.  I am running Windows 7 Ult x64 on ASUS P8P67 Deluxe with 16GB RAM and over 2 TB of HDD space. So my system should not be an issue either.  These are Sample artwork images that were installed with Illustrator cs4.  How do i increase the size of these images?
    Also, these images are showing everything in the ai image, not the individual images in each ai file.  How do i get it to show the individual images in each AI file like they were separate images, like Illustrator?

    Actually, you just solved both of my problems with your question.  I never thought about how the images were created/saved.
    It turns out that for some reason when i re-save the images as version CS4 of course and all options selected in dialog box now the images act correctly and resize accordingly when the separator is moved and will get quite large as they should.
    I also had to use my mouse and select each artboard/image inside the file then re-saved with same settings as above to get multiple images to show up with the buttons at bottom of image in preview mode.  Now all is good.
    These are the default installed sample artwork images.  Not sure why they were like this, may have been some kind of format/process error. Thanks a lot Curt Y.
    Message was edited by: jst1969

  • Photoshop cs5.5 -  loaded on windows 8  - way too small! top and side

    Hi,
    I just loaded CS5  (and 5.5 updates) onto my windows 8  microsoft surface pro 3 computer.
    the top and sides are soooo small you can't even read it.
    I mainly use photoshop; but I loaded the entire web premium set of dvd's.
    is there anything I can do?
    thanks!

    No, I'm on the Cloud now. I've owned Photoshop 5 (1998), 6, 7 CS CS2 CS3 CS4 CS6 CC and now CC 2014.
    Just went from Windows to Mac.
    Photoshop Elements is a permanent license. You buy it, you keep it. Elements has its' own forum where those who know the program will answer your question.
    Anyway thanks for the "correct". You only give it out if anyone settles your questions and you need no further discussion. It closes the case.
    "Helpful" awards 5 points towards a score and "like" is recognition of good information.
    Gene

  • Prints mapquest directions way too small, not like in prior versions.

    mapquest directions are printed very small, which did not happen on earlier versions of firefox.

    Hard Reset – While printer is powered ON, pull
    the power cord from the printer then from the
    wall. After 30 seconds reconnect power to
    wall and printer. This will trigger a ‘dirty power
    up’ and restore the printer to a known good
    condition (if it is possible). No user settings
    are lost with a ‘hard reset’.
    This ‘Hard Reset’ is one of the most powerful
    tools to use when the printer hardware is not
    functioning properly!
    if not resolved, While printer is powered ON, pull
    the power cord from the printer then from the
    wall. on the printer control panel press & hold Help key & Down Arrow ...while holding both keys down reconnect power to
    wall and printer. It will trigger a partial reset.
    if not fixed...printer may have a hardware failure.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • Font way too small on Help Panel

    Hi
    I have recently have a problem with the font in the help
    panel being really small, out of all the books only
    'Actionscript3.0 Language and Components' is legible, all the rest
    are tiny . I have tried the technote at
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_18954&sliceId=2
    and adjusted the pages.js script so that it has to read the css
    file mentioned in the technote but still nothing. Anybody any ideas
    ? Thanks.

Maybe you are looking for