Win7 will not recognize my ATI 5870 video card in Bootcamp

HI,
I have a MAC pro 1.1 and I have an ATI 5870 video card.  On OS 10.9.3 the mac sees the video card just fine, but when I use Bootcamp and run Win7 I can’t get the card to work properly.  I tried to go to ATI and download the drivers but I keep "no such card found on your device" error from ATI or I can’t fine the correct drivers.  When I run Dxdiag the video area shows me no video card information aside from this card is working properly.  Can anyone assist me please?
Thank s in advance.

have you tried to download the correct bootcamp driver zip for your mac and manually install the latests Radeon amd driver from that?
Apple - Support - Downloads

Similar Messages

  • Win7 will not recognize my ATI 5870 video card on Bootcamp

    HI,
    I have a MAC pro 1.1 and I have an ATI 5870 video card.  On OS 10.9.3 the mac sees the video card just fine, but when I use Bootcamp and run Win7 I can’t get the card to work properly.  I tried to go to ATI and download the drivers but I keep "no such card found on your device" error from ATI or I can’t fine the correct drivers.  When I run Dxdiag the video area shows me no video card information aside from this card is working properly.  Can anyone assist me please?
    Thank s in advance.

    A Mac Pro 1,1 technically can't run Mac OS X 10.9 without a hack.  Thus it is unlikely the Boot Camp drivers Apple included for it would recognize anything on it newer than is supported.  You could try using another Virtualization engine that speaks to all graphics chips with their own drivers:
    https://discussions.apple.com/docs/DOC-2741

  • My new Mac Pro will not recognize my old Canon video camera

    My new Mac Pro will not recognize my old Canon video camera

    We've used the 400 to 800 firewire cables with limited success in the past...dropped frames was the main problem. Only used them until the Sonnet FireWire PCIe Card came in to allow a 400 firewire.

  • My mac will not recognize my kodak 8gb memory card what do i do

    my mac will not recognize my kodak 8gb memory card what do i do?

    Follow up to Linc's post above: Are you using the SD card reader in the Mac or an external card reader?
    Stedman

  • Cisco 1760 router will not recognize wic1-dsu-t1-v2 card in slots 3 or 4

    My 1760 router will not recognize a wic1-dsu-t1-v2 card in slots 3 or 4. They only work in slots 1 & 2. Never saw this before where the same card would not work in different slots.
    Need assistance.
    Thanks,
    Ron
    Router#show version
    Cisco Internetwork Operating System Software
    IOS (tm) C1700 Software (C1700-IPBASE-M), Version 12.3(6c), RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Tue 20-Jul-04 07:00 by kellythw
    Image text-base: 0x80008120, data-base: 0x80C74650
    ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
    Router uptime is 20 minutes
    System returned to ROM by power-on
    System image file is "flash:c1700-ipbase-mz.123-6c.bin"
    cisco 1760 (MPC860P) processor (revision 0x500) with 55598K/9938K bytes of memory.
    Processor board ID FOC0849230K (3846615071), with hardware revision 0000
    MPC860P processor: part number 5, mask 2
    Bridging software.
    X.25 software, Version 3.0.0.
    1 FastEthernet/IEEE 802.3 interface(s)
    2 Serial network interface(s)
    WIC T1-DSU
    32K bytes of non-volatile configuration memory.
    32768K bytes of processor board System flash (Read/Write)
    Configuration register is 0x2102
    Router#show flash
    System flash directory:
    File  Length   Name/status
      1   7517112 c1700-ipbase-mz.123-6c.bin 
    [7517176 bytes used, 25775112 available, 33292288 total]
    32768K bytes of processor board System flash (Read/Write)
    Router#show diag
    Slot 0:
            C1760 1FE VE 4SLOT DV Mainboard Port adapter, 3 ports
            Port adapter is analyzed
            Port adapter insertion time unknown
            EEPROM contents at hardware discovery:
            Hardware Revision        : 5.0
            PCB Serial Number        : FOC0849230K
            Part Number              : 73-7167-05
            Board Revision           : B0
            Fab Version              : 04
            Product (FRU) Number     : CISCO1760
            EEPROM format version 4
            EEPROM contents (hex):
              0x00: 04 FF 40 03 16 41 05 00 C1 8B 46 4F 43 30 38 34
              0x10: 39 32 33 30 4B 82 49 1B FF 05 42 42 30 02 04 FF
              0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
              0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
            WIC/VIC Slot 0:
            FT1 4351
            Daughter card-Version 4 TLV Cookie Format
            Hardware Revision        : 1.1
            PCB Serial Number        : FOC09053XP1
            Part Number              : 73-8346-04
            Board Revision           : A0
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Deviation Number         : 0-0
            Product (FRU) Number     : WIC-1DSU-T1-V2     
            Top Assy. Part Number    : 800-22193-02
            CLEI Code                : IP4I380GAB
            WIC/VIC Slot 1:
            FT1 4351
            Daughter card-Version 4 TLV Cookie Format
            Hardware Revision        : 1.2
            PCB Serial Number        : FOC10073JND
            Part Number              : 73-8346-05
            Board Revision           : A0
            RMA Test History         : 00
            RMA Number               : 0-0-0-0
            RMA History              : 00
            Deviation Number         : 0-0
            Product (FRU) Number     : WIC-1DSU-T1-V2     
            Top Assy. Part Number    : 800-22193-03
            CLEI Code                : IPUIAPRRAA

    Hi Ron,
    Slots 3 & 4 are for VICs only.
    Have a look at the Location/ Function table here:
    http://www.cisco.com/en/US/products/hw/routers/ps221/products_tech_note09186a00800c3399.shtml
    cheers,
    Seb.

  • My g4 will not recognize my USB SD flash card

    I am trying to use my USB SD flash card to open some pictures and I get a message that my with 10.4.11 G4 will not recognize the card. I used it yesterday.

    What USB SuperDrive...?
    For the Apple USB SuperDrive, see > Troubleshooting the slot-loading SuperDrive or take it to your local AASP and have it checked out.

  • When I try to import video, Lightroom-4 will not recognize the video files. How do I fix that?

    Lightroom 4 will not recognize the video files.  It will only import the photo files.  How do I import the video files?

    You might provide some additional information, such as what types of videos, from what cameras, and what version of LR4 you are using.

  • ITunes 11.1.0.126 (Win7/64) will not recognize iPhone 5 (neither iOS 6 nor iOS 7)

    iTunes 11.1.0.126 (Win7/64) will not recognize iPhone 5 (neither iOS 6 nor iOS 7).
    Windows can see the USB-connected iPhone.

    With iTunes 10 and iOS 6 it was OK

  • How can you get Premiere Elements to recognize hardware.  It will NOT recognize my Dazzle Video Capture device or either of two HP DVD burntes. I feel like I wasted my money.

    That should have read, It will NOT recognize my Dazzle device or either of 2 HP DVD burners.

    TNTerri
    What version of Premiere Elements are you using and on what computer operating system is it running?
    If Premiere Elements 13, please be advised that it does not support DV or HDV capture firewire. And, any USB devices
    have never worked for that purpose for Premiere Elements (any version).
    As for the burner not being recognized in the Burner Location field of burn dialog of the program, please consider
    (if you are dealing with DVD CD burner rather than a Blu-ray DVD CD burner.
    CD, DVD drive not recognized after Adobe application install | Windows
    Depending on how matters progress, you may want to do an uninstall reinstall using the following scheme
    Uninstall, the usual Control Panel way
    Do a free ccleaner run through to get rid of leftovers from incomplete installs reinstalls
    CCleaner - PC Optimization and Cleaning - Free Download
    Reinstall with antivirus and firewall(s) disabled.
    We might even involve later a deletion of the Adobe Premiere Elements Prefs file and, if necessary, the whole Folder in
    which it exists. More on the latter later.
    ATR

  • How can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

    how can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

    To sync photos from a Mac or Windows PC to your device using photo applications
    Make sure you have the latest version of iTunes installed.
    In iTunes, select your device's icon in the Devices list on the left.
    Click the Photos tab.
    Choose "Sync photos from."
    On a Mac, choose iPhoto or Aperture from the pop-up menu.
    On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
    Note: Some versions of Photoshop Album and Photoshop Elements don't support collections. You can still use them to sync all your photos.
    If you want to sync all your photos, enable the option for "All photos, albums, events, and faces." If you want to sync photos from only some albums, events, or faces, enable the option for "Selected albums, events, and faces" and then select the albums you want. If syncing on a Mac with iPhoto version 6.0.6 or later, you may enable the option to "Include videos" to sync videos directly from iPhoto to your device. (Requires iOS 3.0 or later).
    Click Apply.
    To sync photos from a folder on your hard disk to your device
    Drag the images you want into a folder on your computer. If you want images to appear in separate photo albums on your device, create folders inside the main folder and drag images into the new folders.
    In iTunes, select the device icon in the Devices list on the left.
    Choose "Sync photos from."
    Select Choose Folder from the pop-up menu and choose your main image folder.
    Click Apply.

  • Vista will not recognize my iPod

    I have an iPod video and my Vista system will not recognize it. I downloaded and installed iTunes 7.5XX, but I still can not get it to recognize the iPod. Any help would be greatly appreciated.

    I think I had the same problem as you guys, Vista wouldn't recognize my ipod but it was seen in device manager as a mass storage device. What happen to me was vista ask me if I wanted to format my ipod so it would work with vista like a dummie I said yes and from that time on it was not seen in my computer and in itunes. I ended up putting it on a new computer, when I installed itunes I plug in my ipod and this time itunes seen it and told me it was corruped, I was able to backup the music and videos I had on it to the new computer then I did a restore on the ipod and now all work good.
    Message was edited by: csmi
    Message was edited by: csmi

  • Photoshop will not recognize upgraded RAM.

    I recently upgraded my Mac Pro to about twice the RAM it had before. Sadly, my Photoshop CS5 does not recognize the upgrade and insists that my drive does not have enough RAM to open GL. It won't save preferences and doesn't recognize me as an administrator and will not recognize that photoshop is unlocked. Lots of issues. I've tried uninstalling and reinstalling the program with no success. Any suggestions.

    Photoshop already recognizes your added RAM, because it gets the RAM information from the OS every time it launches.  See the details in the performance panel of preferences.
    But you're talking about a warning that tells you you don't have enough VRAM on your video card - and that has little or nothing to do with the DRAM installed in your machine.
    For VRAM, you'd have to upgrade your video card/GPU.

  • IMovie 11 will not recognize panasonic hdc-sd90 camera

    I have just shot my first clip with this video camera and am trying to import it into imovie 11 but imovie will not recognize the camera even though the video camera shows up in system profiler ? any suggstions please.

    One cable, or an adapter plug for the cable? I assume the former.
    If the Sony works, you can capture using that most likely.
    About this Mac>More Info
    You should see the camera identified here:
    If it's not seen by the OS it can't be seen by iMovie, regardless of the version you're using.

  • I movie will not recognize .mpg files

    I have recently transferred all my PC videos to my I Mac. I am trying to make movies using I Movie but it will not recognize these files. Any thoughts?

    .MPG files are containers to various encoding formats, some of which are not supported by iMovie. Just because the files are playable in QuickTime, does not mean the files are editable in iMovie.

  • Will the 5870 Video card run off...

    I have a 5870 Video card in a 2012 Mac Pro using 2 power connections off the motherboard. No available power connections right now.
    I need a spare power connection off the motherboard to run an Avid HDX card, (fan only), so will the 5870 Video card run ok split (Y) off one power connection?
    I've got the cable, but I didn't want to just do it and ruin something.
    Thanks for the help.

    Mac Pro community is here.
    How about using serial ata power connector for Avid HDX card and motherboard 2 power connectors for graphic card, if you do not install 4 HDDs?
    serial ATA power connection

Maybe you are looking for

  • HT2203 How do I export a file from the new iMovie 10.0.2 to iPod size?

    How do I export a file from the new iMovie 10.0.2 to iPod size? I used to be able to do this and it would save as a m4v file but I can no longer do this and the files are too big.

  • XSLT concat() problem.

    Help guys, this XSLT is getting me down! Im quite simply trying to take a string, and replace tabs with 4 non-breaking space characters. Can someone please explain to me why the following template doesnt work? It should take in a string, perform the

  • Creating a fillable and editable pdf?

    How do i turn a pages document into a fillable and editable pdf?

  • Permissions error saving or exporting iWork 3 files

    Using Numbers 3.0.1. I consistently get permissions errors Saving As or exporting a Numbers (or the new Keynote) document. Even to my Desktop. I've recently repaired permissions on this machine (via booting to the Recovery Partition). Occasionally ch

  • Oo4o trailing white space

    Hi, I am using oo4o in ASP page, to select data from an Oracle 8.1.7 database. Using the Oradyanaset / Orasession. This works fine but I have a couple of queries where the data returned contains trailing white space. However, I have noticed that in m