Win7/X-Fi XtremeMusic Card ONLY SPDIF options in Sound no analog

Hi All,
Here is my issue. Recently I had a Western Digital HD crash on me...
I rebuilt the box with new seagate dri've and Windows 7 again (same RC as before)
I installed Win7, no problem. started installing the required drivers for my hardware.
(Before when I did have sound on my Win7 Installation, I upgraded from?XP 32 bit to Win7 64?because of lack of time)
When I finally start installing the Creative driver, This is the driver -->?[url="#">Creative Sound Blaster X-Fi series driver 2.8.003 [/url]and also tried XFXA_W7DRVBETA_US__04_0090
however after rebooting i could only see SPDIF Out Device in my Device Manager. I removed the driver completely and also removed the device from the Device Manager then rescanned for hardware changes so it would detect it again.
Windows was able to to detect the device with no problems.
Windows then named the device Creative SB X-Fi and no driver was installed. (makes sense, it knows what type of device it is now) however, when re-installing the driver I had the same result. So I once again removed the device and driver. Then used the Autoupdate feature Creative provides and it found a completely different driver version for my card, so I decided to try it. the autoupdate downloaded and installed? the same version yet again and of course with the same results.
I also removed driver and device as well and physically moved the card?to another PCI slot still same results.
So basically, the only thing that's changed in my config of the box, is new HD, and move of card from one PCI slot to another.
Previous setup was, OS was upgraded from XP 32Bit to Win7 64bit, (all worked fine). After clean install, nothing.. Driver will not recogonize analog connection to speakers. Only SPIDIF connection shows in Playback Tab, no Analog at all.
no Recording, Sounds?options available in sound properties
Is there another driver I can try to get the analog to work? Do you have any idea why this is happening, and what the fix for this is? Perhaps I missed?a post on this within these forums, if so could you point me to the solution?
This is a real pain and I have no sound whatsoever.
Thanks,
Coolcat!!!

DWell, I've had the same problem for more than two years. I've tried uninstalling and reinstalling the drivers more than 20 times. I've tried reinstalling Windows 7 x64. I even bought a hole new system, but the problem remains in Windows 7 x64 and windows Vista x64.
I gave creative 300 dollars for this card, and their support can' solve the problem. Thank you for pissing in my face! I will never, NEVER buy creative again!

Similar Messages

  • I can't download applications because of freaking credit cards can't find the click and buy or none there's only 3 options visa MasterCard and Amex can anyone help me please........

    Can anyone please help solve my problem regarding the credit card option so I can download free application from app store there no options for clickandbuy or none Thera only 3 options VISA,MasterCard and Amex.....please I really need help here".........

    This page explains how to create an account without a credit card (I'm not sure whether it's possible in all countries) : http://support.apple.com/kb/HT2534

  • Lync 2013 user appears twice in Lync, once with all features, a second time with only the option to make a voice call

    Hi,
    I'm using 15.0.4551.1007.
    A user appears twice in my contact search but in the second instance he has a phone icon and I can only make a video call to the user.
    His contact card only shows a phone number in 'Other'.  The number appears in his other contact card but not in the same format.
    I suspected he is somewhere in my contacts but a search found nothing.  He's not listed twice in the Exchange GAL either.
    Where can Lync be getting this information?  it doesn't happen to every user and he's enabled the same way as everybody else in Lync.
    Thanks,
    rudif

    Open Lync option, click Personal tab. Choose None under Personal information manager.
    Then sign out and sign in to check if you can see the contact twice for the specific user.
    Please also check if other users have this issue. If they do have, the problem locates on the address book server or Active Directory.
    If only you have this problem, try to delete the Lync cached file for you user.
    Lisa Zheng
    TechNet Community Support

  • How to prevent the use of wild cards in select-option

    Hello experts,
    Is it possible to prevent the use of wild cards in a select-option? If yes, how is it done please?
    I have a
    SELECT-OPTIONS: o_comp  FOR dbtab-field OBLIGATORY DEFAULT 'FI'.
    and, I want to prevent the users for giving in some thing like FI* with the wildcard bc it would lead to dump.
    I want an error message to display and prevent the users for making such entry.
    Please I need your help and I would be very grateful.
    Thanks
    Nadin

    You have to use SELECT_OPTIONS_RESTRICT to restrict input allowed. Call this FM in INITIALIZATION or SELECTION-SCREEN OUPUT sections.
    Sample :
    TYPE-POOLS: sscr.
    INITIALIZATION.
    * Restrict SELECT-OPTIONS
      PERFORM restrict_select.
    FORM restrict_select.
      DATA: restrict TYPE sscr_restrict,
            opt_list TYPE sscr_opt_list,
            *** TYPE sscr_***.
    * Défine select-options modes (aka option list)
    * - ALL standard - all options allowed
      CLEAR opt_list.
      MOVE 'ALL' TO opt_list-name.
      MOVE 'X' TO: opt_list-options-bt,
                   opt_list-options-cp,
                   opt_list-options-eq,
                   opt_list-options-ge,
                   opt_list-options-gt,
                   opt_list-options-le,
                   opt_list-options-lt,
                   opt_list-options-nb,
                   opt_list-options-ne,
                   opt_list-options-np.
      APPEND opt_list TO restrict-opt_list_tab.
    * - EQU only equality allowed (list of values)
      CLEAR opt_list.
      MOVE 'EQU' TO opt_list-name.
      MOVE 'X' TO opt_list-options-eq.
      APPEND opt_list TO restrict-opt_list_tab.
    * Affect modes to parameters or block of parameters
    * ALL by default
      CLEAR ***.
      MOVE: 'A'          TO ***-kind,
            '*'          TO ***-sg_main,
            'ALL'        TO ***-op_main.
      APPEND *** TO restrict-***_tab.
    * EQU to internal material number
      CLEAR ***.
      MOVE: 'S'          TO ***-kind,
            'S-MATNR'    TO ***-name,
            'I'          TO ***-sg_main, " no exclusion
            'EQU'        TO ***-op_main. " only value list
      APPEND *** TO restrict-***_tab.
    * Call  FM
      CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
           EXPORTING
                restriction = restrict
           EXCEPTIONS
                OTHERS      = 1.
    ENDFORM.                    " restrict_select
    In the sample, only select-options for matnr is restricted to single value list.
    For your request build a mode with all options except "pattern" ones : CP and NP.
    Regards

  • Valid Size not available for this Creation (Greeting card only) - Elements 10 for Mac

    I purchased Adobe Photoshop/Premiere Elements 10 for my MAC and am getting "VALID SIZE NOT AVAILABLE FOR THIS CREATION" when I try to create a GREETING CARD only.  All other options in CREATE work.
    I have read other forums on here and have tried everything they have said and it still does not work.  I have tried:
    opt, cmd and shift to delete preferences
    uninstalled and reinstalled
    performed updates on both my MAC and the program
    Can anyone PLEASE suggest other solutions to this problem?  Perhaps I am doing something wrong.  Thanks!

    Hi - My file structure is somewhat different than the file structure that you describe in the first part of your note (My system is Windows XP with Service Pack 3).  This is what my file structure looks like: 
        C:/Program Files/Adobe/Elements 10 Organizer/locales/en_US
             >application_swfs
             >Plug-Ins
             >Suppport Files
    No Creation Graphics folder, no Kodak Gallery Folder, no files with the name E9_preview_photocard_1(or2).jpg.
    I perfromed a hard drive search on filename E9_preview_photocard* and found these files under:
         C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\10.0\Locale\en_us\CreationGraphics\local
    I performed a hard drive search on Kodak Gallery and found the file under:
         C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\10.0\Locale\en_us\CreationGraphics\Kodak Gallery
    This Kodak Gallery folder contains 10 files, 2 of which appear to be related to Greeting Cards.  These are 5x7_adobe_folded_cards and 5x7_adobe_folded_cards_zoom
    Regarding the 235x120 greeting files, I search and found these under
         C:\Documents and Settings\All Users\Application Data\Adobe\Photoshop Elements\10.0\Photo Creations\photo layouts
    NOW WHAT???
    thanks

  • XtremeMusic card being found as an XtremeGamer card.. W

    I bought the X-fi XtremeMusic card Product on box is listed as SB0460Product on actual sound is listed as the same, SB0460.However, when I try to install the installtion CD it tellsme I have an ExtremeGame card.Also the auto update said the same thing before I even installed the software.So what gives? Why is my Music card, which had better features, showing up as the Gamer card?AMD 64 4000+Windows XP x64 Professional with all updates.X-fi XtremeMusic SB04602 Gigs of DDRAMAsus A8n-sli Deluxe Motherboard with onboard sound turned off in Bios.Only sound drivers installed are the ones that came in the XtremeMusic box.Everything on the box picture matches the actual card EXCEPT on my card there a heatsinkove the actual chip. But everything else is exactually like the XtremeMusic card.
    ?Message Edited by techware on -27-200607:05 AM

    I would expect the software driver to atleast know?the card's name... I mean, this is one?of?the very basic stuff a driver should do, now think about?the complicated parts of the code,?where functionallity comes into place. "does it actually matter, Isn't the software installed the same?" - go figure I say... note:?athlon64 3200asus a8n-sli deluxe,?2g ram,7800gt sli x2xp pro x64xtrememusic (without heatsink,? installation CD?made before xtremegamer was born)?I have none problems whatsoever. one of the lucky-boys around, buy hey.. will this baby work on a new mother/system Im planning to buy? :angry:Message Edited by applejack on -27-200606:37 PM

  • SD card only works if inserted at boot up in a Pavilion p6-2419 Desktop

    I recently updated my computer from Windows 8 to Windows 8.1. Now, my SD card reader does not work. The only way I can get it tio work is by putting an SD card in the reader slot prior to turning the computer on. The system seems to load a default driver but only if it sees a card inserted. If I start the computer with no card inserted, no driver is initiated and therefore it won't recognize a card when inserted after. I have gone to the driver updated page for my computer and no driver is listed. Is there a Windows 8.1 driver available for this reader?

    OK, I guess I need to be really specific here.
    First of all, my SD cards work just fine in my HP Pavilion g6-1d44ca Notebook PC.
    Secondly, this card reader in my desktop PC is an internal card reader that HP built into my desktop PC. I have no clue as to who the manufacturer is. I would certainly think that HP would know what components they used in their own PC's. If HP could tell me the manufacturer and make/model of the internal card reader in my desktop PC, then I would attempt to go to that manufacturer's website and try and find a driver for it. Since the before mentioned notebook pc of mine also has an internal card reader, I can go to the HP support page for that notebook and find the driver for it quite easily. I just look under "Driver - Storage" and there it is "Realtek Card Reader Driver". Amazing! However, when I go the the support page for this subject desktop PC, I find nothing for the card reader. Why?
    Lastly, you tell me I should unistall the USB devices in Device Manager and reboot. Well this could be very problematic considering I use as USB mouse and keyboard and once I uninstall these devices, I will have no control over my PC and I will have only one option but to power the PC off rather than performing a normal shut down.
    Please, if HP cannot provide me with the Windows 8.1 driver for the card reader component that they installed into my computer, at least tell me who the manufacturer and model is so that I can do it myself as it appears this effort is too much for the folks at HP to do it themselves in support of their customers.

  • I bought this iPhone from Apple Retail Store for the full amount, but  it does not work with my SIM card only works with AT&T

    Hello,
    I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
    I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
    Thanks,
    Best Wishes

    When did you buy it?
    Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
    What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason.  Return it and get your money back, then use that to purchase an unlocked phone.

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • I want to install apps from itunes to my ipod and manage them manually but there is only one option to do that replaces my apps on ipod with apps in my itunes library . Is there any way to install the apps without replacing them??

    I want to install apps using itunes from my pc but there is only on option for doing that i.e. itunes replace the installed apps with apps on itunes. Is there any other way for doing that without replacing my apps ???

    Ipod touch will sync with one computer at a time.  If you sync to another then it will erase the current content and replace with content from the new computer.

  • How do I reinstall Yosemite on my retina MacBook Pro when the only disk option to choose is Recovery HD and it is locked?

    I was trying to install windows 8 on boot camp but it said the disk couldn't be partitioned because some of the files couldn't be moved. So I went into disk utility and selected my HD (the second option) and clicked erase but I went super quick and I believe there was an error. Now I am trying to reinstall OS X Yosemite but when I click on "Re-install" Yosemite the only two options for where I want to install it are my recovery HD (which is 650MB total) and my Wininstall bootable windows USB. I don't know if I did something serious or how to reinstall Yosemite when I can't select or do anything with the first main Macintosh HD option in Disk Utility. Please help!

    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.

  • I don't have a credit card (only debit cards), how do I add my kids to our family share?

    I keep getting an error that I need to prove I am an adult and add a credit card to my iTunes account. I don't have credit cards, only debit cards, and that doesn't seem to be acceptable. Any help would be appreciated.

    That doesn't seem like a good system. Is there any alternative?
    Not that I know of. You could do it the old way and simply share the same Apple ID for family purchases.

  • How do I remove my credit card info from my children's apple id's and restrict their Itunes and app purchases to gift cards only?

    Hello All,
         Does anyone know how to restrict your children's Itunes purchases to gift cards only and remove my credit card information from their Apple ID's and devices?
    Appreciate your thoughts,
    Brian

    Log into your child's iTunes Store account and follow the instructions in this support article to get to the account information:
    http://support.apple.com/kb/HT1918
    and select "none" for the payment method.
    Regards.

  • HT201303 How do I delete a credit card from payment options?

    How do I delete a credit card from payment options in the itunes store?

    How did you solve it? I just waited until my credit card expired and kept a gift card balance always running so that I did not have to give them my personal credit card info. They admitted to almost and/or being hacked so why not aloow PayPal or using a credit card without keeping its info?
    Thank you,
    [email protected]

  • I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to sen

    I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to send emails with photos embedded. I like adding the frames and backgrounds and I think it's easier for recipients to look at the photos. Thanks for any suggestions of things to try.
    Gail

    I had a similar problem in that my wife's iphone 5 could not send pics with imessage.  Had to set the settings to default to SMS or whatever.  After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed.  They changed the router channel, which is something that I am capable of doing myself.  After that, the pics go over imessage.  My own Iphone didn't have the problem.  We are both latest IOS 7.0.6.

Maybe you are looking for