Win7 x64, 8GB RAM, CS4 - page file?

Hello all,
I have CS4 running on Windows 7 x64 with 8GB RAM (DDR2, 800MHz) and I'm wondering how much MB/GBs for page file I need. Currently is OS making 8GB page file. Is it enough or I should enter lower value? I think that when you have more memory you need page file less.
BTW I'm on DTP PC so large files in InDesign, Photoshop and Illustrator are my daily routine.

By itself, InDesign, a 32-bit application, can only access 2GB of memory at one time. The 64-bit version of Photoshop can use whatever it can get. Other than Photoshop, for you, the biggest advantage of WIndows 7 64-bit is that when running multiple programs in parallel, with more real memorY (and you have 8GB of that), there will be much less paging than otherwise.
In terms of the paging file size, the OS recommended / default size should suffice. In any case, with that amount of real memory, I would not extend the paging file beyond 12GB tops!
- Dov

Similar Messages

Reader XI w/ win7 x64 8GB RAM, pdf shows 'out of memory'

Good afternoon, title says it all. I gather this is nothing new but thought I'd throw my hat into the ring. For what it's worth this approx 500kb pdf not only gives out of memory on reader xi but also only shows as a blank page on foxit
The page is at
https://workspaces.acrobat.com/?d=HCs5d4qzwoVFHbMOwP3Ppw
See what you think.Thanks to all
Scott

It's pretty comprehensively broken, not least by some HTML injected at the end of the file.
I suspect it was served by a web server which injected some code related to AJAX, whatever that is, despite the fact that this would break the PDF. The PDF data itself, especially some JPEG image data, was mangled far beyond repair.

When attempting to install Id on Win7 x64, stall on installing help files.

I've tried uninstall of CS6 (partial install that occurs during attempt) and use the CC Adobe cleaning tool with no change in symptom when trying to install again.

Hi,
Please go to Control Panel -> Programs and Features and uninstall Adobe Help Manager and then try to install indesign on your system it should get install.
if still not work then
Go to C:/program files(x86)/Adobe/Adobe Help ,
move this folder on the desktop ,
run the installation again for the software.
Regards,
Jatin Dembla

CS4 x64 16GB RAM

Hi,
My system:
Windows Vista x64
RAM 16GB
Photoshop CS4 64bit and configurated to use 12GB of RAM (preferences)
Photoshop manages up to 4GB RAM only, but it generate a lot more data in swap file (disk scratch) without using the 8GB RAM available.
What happend?

So Photoshop sees the 16gb...and you allocate 12gb - which it sees and utilises. How big are the files you are using? I reckon it doesn't need all 12gb ram so wont use it.
I have 16gb and CS4 will only use all the ram when I am using mega massive files.
Try pushing up the image size /complexity so that they are around 6gb (saved file size) and see what happens....

On my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

thanks for your reply.
in Dutch it says that there are no updates available. I know that after
installing cs4 there are updates but i can't load them automatically. I did
a delete and reinstall, but still get the message.
kind regards,
2014-09-23 16:28 GMT+02:00 Atul_saini123 <[email protected]>:
on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the
automatic update voor CS4 master collection. I removed my panda antivirus
and still can't automatically update. somebody any suggestion? created
by Atul_saini123 <https://forums.adobe.com/people/Atul_saini123> in *Downloading,
Installing, Setting Up* - View the full discussion
<https://forums.adobe.com/message/6755843#6755843>

WIN7 x64 Home Basic, 0x80070013 when trying to write or delete files. Disk is write protected.

Hi,
My SD card reader is not able to write or delete and format sd cards.
WIN7 x64 Home Basic, 0x80070013 when I trying to write or delete files. When I trying to format I can see a message that disk is write protected.
The card is not locked, it's work in Lenovo Idea Pad s10 without any problem, It's also work in my Pentax camera.
I'm almost sure that the problem is software, but can't find solution.
Could Any one help me please?
Laptop is new, 8 days in use.

I have network shutdown 2.0.1 installed and the pcns process normally would be abend in 1 or 2 minute's time. What could be the problem ? Consider to upgrade the network shutdown to 2.2.1 version. Could the problem be resolved in new version ? Any precaution needs to be taken when installing the new version ?
Terence.

Problems deploying Windows 7 x64 computers with more than 8GB RAM

SCCM 2012 R2 CU1
Windows 7 x64
We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
- we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
The error shows in 3 different ways – depending of the computer model.
1) BSOD – STOP 0x000000F4. Disk error.
2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently fail every time after the error has begun. If we reduce (remove physically)
the memory to max. 8GB of RAM, they successfully run the Task Sequence. We get the above errors on both Lenovo and HP machines with more than 8GB.
I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
error on both m93p and M83. At least not the BSOD on the M93p ;-)
Tried setting SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
the same problem.
Investigating the smsts.log on a computer with the 0x87D00269 error.
Policy Evaluation failed, hr=0x87d00269 InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
you have not previously used.
Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords. And again why only on computers with more than 8GB RAM.
Anyone else had problems rolling computers with more than 8GB og RAM?
Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
Why does it only affect machines with more than 8GB RAM?
How to get rid of the 0x87D00269 error?
Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
Any help or hints would be appreciated!
Thanks
Anders

We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
Machines with >4GB of RAM
Lenovo ThinkPad T540p failed applying drivers with 80040005
Black screen/white cursor issues intermittently
No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
Daniel Ratliff | http://www.PotentEngineer.com

Photoshop CS4 (64bit) & Win7 x64 problem fixed

I just wanted to post this to help anyone who might be having this problem.
Here's the problem. When you use Photoshop's lasso tool, you can press ALT at the same time, and it would turn into a magnetic lasso tool that you can use to make straight lines.
Well, what would happen is that I would be making a selection, and then suddenly the screen (both screens, as I'm using a dual screen setup) would flicker, and the selection would complete by itself, and I would be SOL, as, obviously, the selection is not what I wanted.
I could replicate this without fail. I'm halfway done with making a perfect selection, and bam!, this crap happens, and I have to start all over again. It happens ALL the time, no matter what Photoshop setting I used. Photoshop was completely updated, and all my device drivers (video card, mouse drivers, etc.) were all at their latest. So I started looking outside Photoshop, as I was thinking it might be another software problem.
After much trial and error, I narrowed it down to Task Manager. I had Task Manager running in my tray. If I closed Task Manager (not minimize, close), restarted Photoshop, and made my selection using the lasso tool, the issue would go away, but would come back randomly.
The fix? Run Photoshop CS4 in Vista compatibility mode. This solves the problem completely.
I know a lot of you will probably say that you have Photoshop CS4 running flawlessly on Win7 x64, but I have 3 computers, each with completely different configurations, one of them being a laptop, that I was able to replicate this on. Once I ran Photoshop in Vista compatibility mode on each computer, the problem was completely solved.
So I hope this helps anyone who has run into this problem.

I confirm he is a blond wanna be.
function(){return A.apply(null,[this].concat($A(arguments)))}
Hudechrome wrote:
It won't work for me. I never used Vista.
(I will neither confirm or deny I am a blonde!)
Thanks for sharing.

Need advice on Page file settings in Windows 7 x64

Hi Guys
I just opgraded my main CS6 rig to a total of 32 GB RAM. This means, that the system has added allocated space for the page file on my system drive, a 128 GB Corsair Pro SSD disc, and I therefor only have 23 GB free.
I was wondering if I could put some or all of it on another, 240 GB SSD I have in my system that I use for PPRO previews, media cache etc. or I should simply upgrade my system drive to the 240 GB version?
I have 2 600 GB WD Raptor 10K rpm drives too, one for media and one for render, could maybe put it there too?
I am a bid unsure how to do this rigth, so any advice would be appreciated
Thanks in advance.
Ulf

....I am sure soon you will hear from others on this forum more knowledgeable than me....but, from what I've read hear before, to produce the fastest performance with your current equipment would be to keep your OS and programs only on your current "C" drive. Assuming these SSDs are SATA III for best performance, you would then place a static pagefile at least 1.5x your installed system memory,(at least 48 GB), on the 240GB SSD, along with the previews, cache, and media cache files.
    No need to worry about any "SSD reliability" issues on that drive, as all those files can easily be re-created.
    Then , for fastest performance, you would create a 2 disk onboard RAID 0 with the two Raptors to place your media on for fastest editing performance. However, you must use an additional disk as the primary location of your important, original media files.....then, you would copy those onto the RAID for editing speed.
   Then, you may either : export to the 240GB SSD for faster export.....then copy those to that new additional 7200 RPM you must buy,or, just export to that new drive directly,( may take a little longer).
   Newer Marvell controlled, ( not Sandforce), SSDs are supposedly able to handle "incompressible data", (like digital video files), well, without slowing down during writes. Storage Review and other sites have tested these.....Plextor and Corsair Pro series SSDs look to be the best,but, expensive. I have NOT had any trouble so far with my SATA II Corsair F120 SSDs....at the time, 2 years ago, that drive was rated as having read and write speeds of over 200MB/sec. My tests showed that to be true. A large,cheap Marvell controlled SSD is the Crucial M4,( just issued new firmware)......it was as low as $339 for a 512GB recently.
    In general, you will hear criticism here on using SSDs for video editing. Without using a huge RAID array and expensive controller card....the standard recommendation for a system like yours is to have a five drive setup.....plus backup. One drive for OS and programs, plus two -2 drive onboard RAID 0 arrays.
    Use of a single 7200rpm disk,( at 100-130MB/sec.) can slow you while editing.....hence the fast RAID arrays. Speed of OS drive is not that critical, once the program is up and running....it is your "project" disk speed that is important.
   Once re-configured, you should visit the PPBM5 website, and see how your rig does with the benchmark test compared to other setups.

PrE-10 Will not start in Win7(x64)

I sincerely hope this is not redundant, but I have spent days on this forum looking for answers, but with no luck. I have seen many similar questions, but none of the 'fixes' proposed are relevant, or do not work for me.
History:
I have been running PrE-10 since its release, on Win-7(32-bit). I recently had a system crash after installing Windows-8 Beta and had to wipe my hard drive and start from scratch. This time I loaded Win-7 (x64). All my original apps I had stored on an external drive. Some re-installed, some not. I had to re-download PSE-10, and PrE-10 as 64-bit apps.
PSE-10 and the associated Organizer, work fine as before. PrE-10 however does not start. I get the splash screen, with the options of NEW, OPEN and Organizer. Of these, only Organizer opens. The other two options either bring up a Windows Error box 'Pre-10 has failed to start', or it just sits and does nothing.
It is not a system limitation as I have far more than the requirements needed to run it and as I said, it worked fine in the 32-bit version, and nothing else has changed (that I have input), so I am baffled.
As I said, I have done many of the proposed fixes I have seen on the forum, if they are pertinent to my system, and even some that were not. I have now completed the reinstallation of most of my applications, and so far only PrE is causing a problem, but it is very important to me as I am working on a project that requires it.
I have done a Belarc report, but I do not see a link to upload it. I see links for images, videos, tables and weblinks, but nothing for files (pdf). I will attempt to load it as an image and see if this works. I do not want to post it as text or HTML as it is 7 pages long! (Nope, it does not insert). Perhaps someone can tell me how to upload the file.
Here is a system summary:
OS Name
Microsoft Windows 7 Ultimate
Version
6.1.7601- Service Pack 1 Build 7601
Other OS Description
64-bit
OS Manufacturer
Microsoft Corporation
System Name
DOUG-IQ775
System Manufacturer
HPQOEM
System Model
SLIC-CPC (TouchSMart IQ-775)
System Type
x64-based PC
Processor
AMD Turion(tm) 64 X2 Mobile Technology TL-58, 1900 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date
American Megatrends Inc. 5.15, 11/26/2007
SMBIOS Version
2.4
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume1
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
User Name
DOUG-IQ775\DOUG
Time Zone
US Mountain Standard Time (AZ)
Installed Physical Memory (RAM)
   4.00 GB
Total Physical Memory
   4.00 GB
Current Available Physical Memory 1.68 GB
Total Virtual Memory
           8.00 GB
Available Virtual Memory
           5.32 GB
Page File Space
           4.00 GB
Page File
C:\pagefile.sys
STORAGE
USB Flash Memory, s/n 001D0F1FCF2DC8C08406020B, rev 1.00
Generic Flash Disk -- drive 8, 8GB s/n 03483DBB, rev 8.07
WDC WD16 00BEVS-60RST0 -- drive 7, 160GB s/n WDC WD1600 WD-WXC108351497
Generic CF Reader -- drive 5, s/n 058F12M111B, rev 1.01
Generic SM/SD/MS Reader -- drive 6, s/n 058F12M111B, rev 1.00
Century EX35SW4_SB4-A USB Device -- drive 1, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-B USB Device -- drive 2, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-C USB Device -- drive 3, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-D USB Device -- drive 4, s/n 011E011D3B, rev 0100
HARD DRIVES
c:/D:(NTFS on drive 0) *
500.11 GB
k: (NTFS on drive 7)
160.03 GB
w: (NTFS on drive 1)
250.06 GB
x: (NTFS on drive 2)
250.06 GB
y: (NTFS on drive 3)
250.06 GB
z: (NTFS on drive 4)
250.06 GB
WDC WD16 00BEVS-60RST0 USB Device [Hard drive K:] (160.04 GB) -- drive 7, SMART Status: Healthy
WDC WD50 00AAKS-65TMA SCSI Disk Device (500.10 GB) -- drive 0, s/n WD-WCAPW3069745, SMART Status: Healthy
Drives new – drive encryption
Memory Modules c,d
1660.37 Gigabytes Usable Hard Drive Capacity
914.49 Gigabytes Hard Drive Free Space
CD/DVD
TSSTcorp DVDR/RW TS-T632L ATA Device [Optical drive]
Software Versions & Usage
     i Adobe Download Assistant
     i Adobe Help
     i Adobe Photoshop Elements Editor Version 10.0
   ı i Adobe Photoshop Elements Version 10.0
   ı i Adobe Premiere Elements Version 10, 0, 0, 0
     i Adobe Systems Incorporated - Elements Organizer Version 10.0
   ı i Adobe Systems Incorporated - ElementsAutoAnalyzer Version 10, 0, 0, 0
       Adobe Reader and Acrobat Manager Version 1.5.7.0
    i Adobe Reader Version 10.1.3.23
     i Adobe Systems, Inc. - Shockwave Flash Version 11,3,300,270
   ı i Adobe Updater Startup Utility Version 2.2.0.2 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)
   ı i Adobe® Flash® Player Update Service Version 11,3,300,270
     i Amazon MP3 Downloader Version 1.0.0.0
     i Any Audio Converter Application Version 3, 3, 8, 1
     i Any DVD Converter Application Version 4, 0, 1, 1
   ı i Apple Inc. - QuickTime QuickTime 7.7.2 (1680.56)
   ı i Apple Push
     i Apple Software Update Version 2.1.3
   ı i Belarc, Inc. - Advisor Version 8.2g
     i Canon IJ Driver Uninstaller Version 1.2
     i Canon IJ Utility Uninstaller Version 1, 3, 0, 0
   ı i CANON INC. - CNSLMAIN.EXE Version 1, 4, 3, 0
     i CANON INC. - MP Navigator EX Version 1, 0, 7, 0
     i CyberLink - CLDownloader Version 2.3.0.2715
     i CyberLink - DZM Version 2.05.3206
   ı i CyberLink Corp. - PowerDirector Version 9.0.0.2930
   ı i Google Chrome Version 21.0.1180.75
   ı i Google Update Version 1.3.21.103
   ı i GSpot Codec Information Appliance Version 2, 7, 0, 1
   ı i Igor Pavlov - 7-Zip Version 9.20
   ı i INR Desk Version 2.0.0.0
   ı i Microsoft Corporation - Internet Explorer Version 9.00.8112.16421
   ı i Microsoft Corporation - Windows Installer - Unicode Version 5.0.7600.16385
        Microsoft Corporation - Windows® Search Version 7.00.7600.16385
   ı i Microsoft Malware Protection Version 4.0.1526.0
     i Microsoft Network Inspection System Version 4.0.1526.0
   ı i Microsoft Security Client Version 4.0.1526.0
     i Microsoft ® Windows Script Host Version 5.8.7600.16385
   ı i Microsoft® .NET Framework Version 2.0.50727.4927
     i Microsoft® .NET Framework Version 3.0.6920.5011
     i Microsoft® .NET Framework Version 4.0.31106.0
   ı i Microsoft® CoReXT Version 7.250.4232.0
   ı i Microsoft® Windows® Operating System Version 12.0.7600.16385
     i OpenOffice.org 3.4 Version 3.04.9590
     i OpenOffice.org Base Version 3.04.9590
     i OpenOffice.org Calc Version 3.04.9590
     i OpenOffice.org Draw Version 3.04.9590
   ı i OpenOffice.org Impress Version 3.04.9590
     i OpenOffice.org Math Version 3.04.9590
     i OpenOffice.org Writer Version 3.04.9590
     i OpenOffice.org Writer(Web) Version 3.04.9590
   ı i Orbitdownloader.com - Orbit Downloader Version 4, 1, 1, 1
     i PlotSoft L.L.C. - PDFill PDF Editor with FREE PDF Writer and PDF Tools Version 9.0.0.9
     i PlotSoft LLC - PDFill FREE PDF and Image Writer Version 9.0.0.9
   ı i Realtek - ReStart Application Version 500, 1001, 719, 2007
   ı i Realtek - RtlService Application Version 700, 1004, 1207, 2009
   ı i RichVideo Module Version 2.0.1.5417
     i Safer Networking Limited - Secure Shredder Version 1.9.0.0
     i Safer Networking Limited - Spybot - Search & Destroy Version 1, 5, 2, 0
     i Safer Networking Limited - Spybot - Search & Destroy Version 1, 6, 0, 30
     i Safer Networking Limited - SpyBot-S&D Version 1, 6, 2, 0
   ı i Safer Networking Ltd. - Spybot - Search & Destroy Version 1, 6, 0, 0
     i SmartSound Sonicfire Pro Version 5.7.1
     i Sun Microsystems, Inc. - Java(TM) Platform SE 6 Version 6.0.0.105
     i The Audacity Team - Audacity® Version 1,3,13,0
Can anyone help me get this app going... please!!
Thanks in advance!
DN

This is frustrating! I just answered this post at length, but when I posted it it disappered!
Guess I have to start over and hope for the best!
Is that an HP laptop?
No, it is a desktop. However it is an HP 'hybrid' all-in-one, and uses a lot of laptop hardware and software to keep the low profile case.
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
I read this and it does not apply to my system.
Otherwise, unless I missed it, I do not see mention of your graphics/video card brand/model and driver number
This is why I asked how to upload the Belarc report! Too much info to post. Here is the Graphics info.
Name
NVIDIA GeForce Go 7600
PNP Device ID
PCI\VEN_10DE&DEV_0398&SUBSYS_2A40103C&REV_A1\4&1BC86A40&0&0020
Adapter Type
GeForce Go 7600, NVIDIA compatible
Adapter Description
NVIDIA GeForce Go 7600
Adapter RAM
256.00 MB (268,435,456 bytes)
Installed Drivers
nvd3dum,nvd3dumx.dll
Driver Version
7.15.10.9804
INF File
oem12.inf (nv_NV3x section)
Color Planes
Not Available
Color Table Entries
4294967296
Resolution
1440 x 900 x 59 hertz
Bits/Pixel
32
Display
Nvidia Flat Screen [Monitor] 19.25" vis
Driver
c:\windows\system32\drivers\nvlddmkm.sys (7.15.10.9804, 5.73 MB (6,006,696 bytes), 1/25/2007 6:43 PM)
Check the ATI or nVidia or ??? website to be sure you have a current driver
Another interesting story, that! Nvidia/GeForce does an auto detect and correctly identifies the graphics card, and sends me to a link to upgrade the driver. The driver page says it is for Vista x64 and Win7 x64 (even its long name has 'win7-x64' in it). I download and attempt an install, and it comes back with "you are running Windows 7 64-bit. This driver is for Vista only. Installer closing." I went back and tried 4 other Win-7 x64 drivers, all reported the same thing, even though they state on the site they are for Win7 x-64. I then went to the Device Manager and tried to update the driver, but it reported using 'the most current driver available'. So I uninstalled the current Nvidia driver, which put me into VGA mode. I then went to Windows Update and did a search for updates. It found a missing Nvidia driver and called it 'Nvidia Driver for Win7 x64'. I downoaded and installed it and my system returned to normal 1440 x 900 display. I checked the driver info and it is the same driver as the original, including the release date, so apparently the original driver was in fact x64 compatible, and there does not appear to be an updated driver for it.
Also, for laptops... if that is what you have
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modul es.html
-http://forums.adobe.com/thread/1001579
It is not a laptop, but as it uses many laptop softwares and hardware, I will check these and see if they help. I will post the results.
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
There are no DISPLAY options in my BIOS setup. There is also no update available for the BIOS from HP
Thanks for the help.
DN

Interlacing in capture from miniDV now occurs with upgrade to Win7 x64

Hi there...
this is my first attempt to post a question on the forum, so thankyou in advance for any help or advice.
I used to run Prem Pro CS4 on a Windows XP (32bit) system with no problems at all.
I since upgraded my OS to Win7 x64 and a perculiar thing happened - when capturing from MiniDV the capture preview is very interlaced -with camera motion. With capture complete and clips placed in the timeline, the interlacing is not at all evident. - it is only apparent at the capture stage.
Thinking it was my Nvidia 8600GT graphics card, I upgraded to Nvidia 9800GT (1GB) - still the same problem. RAM was also give an upgrade to 8GB.
I understand the concept behind interlacing - what has me puzzled is why with win7 this capture interlacing has happened and for the sake of clarity would love to have it rectified.
Otherwise Premiere runs smooth as silk.
Any thoughts or advide would be greatly appreciated
Cheers
Matt
Gigabyte GA-P35-DS3P (rev 2.1)
Intel Q6600 Quad core
DDR2 - 8GB
Video: ASUS EN9800GT (1Gb)
HDD: sys.150GB + 2 x editing / authoring

Can't tell you why it happens. Can only suggest it's not really an issue. Ignore it and keep on editing.

Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO

I have a brand new:
i5 4570
MSI Z87-G45 Gaming
250GB Samsung 840 EVO
1x 8GB Corsair ValueRam DDR3 1600
I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
Bios settings are okay, everything is recognized
USB Legacy - Kingston Datatraveler
HDD Legacy - Samsung 840 EVO
Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
What I've tried so far:
Switch out the SATA cables and power cables
Switch through the various SATA ports on the MB 1 through 6
Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
Update UEFI to V 1.50
All the above result in the case mentioned.
I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
What am I missing here, I would really want to install Win7 instead of Win8
Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
Any clues, tips, hunches??

Quote from: Bernhard on 25-October-13, 18:33:41
Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
Hmmm not sure, thanks for the reply, will have to look into that later today!
I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
::EDIT::
Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued

I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit ? And office pro 2013 64 bit too?

I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows programs I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit or just install 32 bit? (Going with Win7 as I hate Win8). And I will install Office Pro 2013 64 bit too or 32 bit or is that automatically selected by the underlying OS (I use Word, Excel and Access mainly for a membership database of a local club) ? I am not a power user so would appreciate advice on way to go

Again thank you. If I only use word, excel and access in the Win environment and Mac OS for email and safari for internet do I need anti virus software . Ie my connection to the world is mac only and I use office pro only to ruin the club, newsletters, membership database etc. and of course anything I do there can drag/drop to the mac environ to email. That's my understanding anyway. Next will my existing .pst file copy directly into mac mail or do I have to runs translator as I recall reading something about that ages ago when I started thinking Mac

Consumption of a lot of page file space with Solution Manager over windows

HI guys,
I have installed Solution Manager 4.0 SP10 over Windows 2003 Server, Standard Edition. The server has 4 Gb of RAM and 10Gb of page file.
Before to start Solution Manager the memory used is 500Mb and the used page file is 1Gbytes, but when I start Solman, the memory used grow up to 3.8 Gbytes and the pagefile to 7Gbytes.
Is this behaviour normal?, should I need near to 8Gb to run SolMan in memory?
does someone experience or tips regarding this is issue?
Thanks in advance for your comments guys!!!!
Regards Carlos Pozo.

Hi Ragu,
All SAP guides talk about aprox. 10Gb in Win and aprox. 20Gb (max.) in Unix.
You are right (also....;-) ), but my question is regarding the consumption of this page file, for example, we have XI 3.0 installed in AIX (ABAP+JAVA like Solman), and we have 8 Gbytes of RAM installed, in scenario we have in average 1.5Gbytes of free memory and not swap space used, that means in average XI use 6,5 Gbytes of memory (including DB instance, oracle 9.2), with at least 15 users connected, in contrast Solman has only one user connected and only 6 dialog wp and use almost 10Gbytes (adding RAM and SWAP space).
Is normal that Solman 4.0 need so much memory to run?
Do you know some way to decrease the swap consumption?.....
I know, I know.......I'm asking almost for magic solutions......

32-bit ODAC 11.2.0.2.1 Installed on Win7 X64 with Oracle 11gR2 x64

I have Visual Studio 2010 x64 installed on a Win7 x64 Enterprise system, along with Oracle Express Edition 11gR2 x64. I downloaded and installed 32-bit ODAC 11.2.0.2.1 so I could use Oracle databases with Visual Studio, along with SQL Server.
When I tried to run InstallAllOracleASPNETProviders.sql in SqlExplorer, I got an error
D:\app\PaulK\product\11.2.0\client_1\ocijdbc11.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform. Vendor code 0.
Everything was working fine before I installed ODAC 11.2.0.2.1.
I've seen references to a beta x64 version of ODAC. Where do I find it? Do I have to uninstall the 32-bit ODAC first? Will uninstalling the 32-bit ODAC fix SqlExplorer?
Thanks.

PaulK wrote:
I have Visual Studio 2010 x64 installed on a Win7 x64 Enterprise system, along with Oracle Express Edition 11gR2 x64. Not sure I follow. Neither VS 2010 or XE 11.2 exists in a 64-bit release. What precisely do you have installed?
I downloaded and installed 32-bit ODAC 11.2.0.2.1 so I could use Oracle databases with Visual Studio, along with SQL Server.Since VS is a 32-bit app (though it can run on 64-bit OS and produce 64-bit binaries), it needs 32-bit libraries, yes.
Is MS SQL Server instance a 32-bit or a 64-bit install? Perhaps both 32-bit and 64-bit clients are needed for planned setup.
D:\app\PaulK\product\11.2.0\client_1\ocijdbc11.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform. Vendor code 0.It seems you are running SQL Developer on a 64-bit java machine. The 64-bit jvm obviously can't load a 32-bit dll, which I'm guessing was found via the 32-bit ODAC's PATH entry. Entry was listed first since Client/ODAC was installed last. Did you use Connection type TNS in SQL Developer? (Or Use OCI/Thick driver ticked in the database / advanced options, in Preferences.)
What's the version of SQL Developer?
Everything was working fine before I installed ODAC 11.2.0.2.1.If I'm correct in various assumptions, you have to cater for different environments/requirements.
E.g to run SQL Developer with correct set of libs.
set PATH=<path to libraries for sql developer/jvm>;<remaining PATH stuff>
x:\some\path\here\sqldeveloper.exe
Another way could be to use Instant Client and drop required lib files (.dll) in proper location within SQL Developer home. (So that it will find proper dlls directly in "cwd" instead of searching via PATH.)
I've seen references to a beta x64 version of ODAC. Where do I find it? There are both production and beta releases.
64-bit ODAC home page:
http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
Edited by: orafad on Dec 3, 2011 10:20 PM
Edited by: orafad on Dec 4, 2011 1:31 AM

Win7 x64, 8GB RAM, CS4 - page file?

Similar Messages

Maybe you are looking for