Win7 x64 SysPrep Image Issue

I have been trying to create a new image that is syspreped for Windows 7 Pro x64. I have created the system and tried to take an image. I get about 75% into the image and the system seems to get stuck copying files up to the server. It run through the same set of files repeatedly without end. I let the process continue last night to see how long it would take before failure. I ended up stopping the process an hour and a half later. The system seemed to be processing the same group of files inside the Windows directory (something to do with amd64) for over a half an hour.
I also tried to Multicast the image over to a different system (Master/Client) and the image became stuck at the same point.
I did reboot and run the sysprepped system to see if something was wrong with the setup that would fail and give me an idea on what to fix. The sysprep ran and deployed as designed without error.
Has anyone ran into this issue?
System Specs: HP 6735b, Win7SP1x64 syspreped on a 50GigByte partition 3 Gig of RAM. (Only Windows no add-ons)
ZCM > 10.3.1.0 / SLES10.2
Thanks
Rich

I haven't tried this, but maybe you could ZIP the folder up so that later
when you restore the OS image you restore the ZIP and extract. This would
have to be done all from the imaging command line (bash).
It's a really hacky way, but I think it could work.
Jared Jennings
Senior Systems Engineer, Computer Integrated Services (CIS)
http://www.ciscony.com
My Blog and Wiki with Tips, Tricks, and Tutorials
http://jaredjennings.org
Twitter@ jaredljennings

Similar Messages

  • MDT 2012 Win7 x64 capture fails - boot loop

    Hi everyone,
    I'm pretty new to MDT and having a problem capturing a Win7 x64 reference image.
    It seems to start out fine doing the Sysprep and so on, but then it has to restart the computer and after that it goes into a boot loop. After this, I have been forced to format and reinstall Win7 on the computer. This picture shows what it loops through
    in about 20 seconds - and it shows nothing else than what's on these pictures :)
    www.jaded.dk/boot_loop.png
    I have been Google'ing alot, but can't find any post with the same issue, since most other get an error msg which I dont.
    Here is some info about the setup.
    I'm deploying the task sequence locally using these commands:
    net use * \\mdtserver\DeploymentShare$ /user:domain\username
    cscript \\mdtserver\DeploymentShare$\Scripts\LiteTouch.wsf
    Server running MDT 2012 U1 - Win server 2008 R2, 64 bit
    The laptop on which i'm trying to capture the ref img is a HP Elitebook 8470p. It is fully patched with windows updates and I have installed a few apps like Office 2010, flash player, reader etc.
    The "Rules" on my MDT Workbench is like this:
    [Settings]
    Priority=Default
    Properties=MyCustomProperty
    [Default]
    OSInstall=Y
    SkipCapture=NO
    SkipAdminPassword=YES
    SkipProductKey=YES
    SkipComputerBackup=YES
    SkipBitLocker=YES
    SkipTimeZone=YES
    SkipLocaleSelection=YES
    InputLocale=0406:00000406
    KeyboardLocale=0406:00000406
    KeyboardLocalePE=0406:00000406
    SystemLocale=0406:00000406
    UILanguage=0406
    UserLocale=0406:00000406
    My task sequence looks like this:
    www.jaded.dk/task_seq.png
    I don't know where to find a log of the capture, to get a hint of what has gone wrong.
    Hope you can help me out here :) And please let me know if you need more info.
    Thanks
    Morten

    Thank you both for answering.
    ccatlett_sogeti:
    I didn't seem to have Windows Deployment Services installed on my server. I just installed it and added WinPE boot files as bootimage according to this guide: http://blogs.technet.com/b/manojnair/archive/2011/11/23/exploring-mdt-2012-beta-2-part-6-of-10-integrating-mdt-2012-beta-2-with-windows-deployment-services-wds.aspx
    Is that correct?
    Keep in mind that I don't use PXE at the moment, if that makes any difference :)
    David:
    I will try to add SLShareDynamicLogging. I set it like this - hope it's correct:
    SLShareDynamicLogging =\\MDTSERVER\DeploymentShare$\Logs\%ComputerName%

  • Another Issue to Add under Win7 x64

    Having upgraded from Vista x64 to Win7 x64 siz days ago, all went smooth with Adobe products (there was no re-install of Adobe's products), but for some issues with Photoshop 64.
    While working on a large image (more than 1GB in size) using the 64 bit version of Photoshop, I ran into a number of niggley problems as follows:
    The clone would not pick up on newly selected targets
    Colors changed when viewing the file at full size (it was a 160inch x 86inch size), i.e. reds turned green
    Attempting to change from a RGB color format to CMYK, it performed the task, but did not show it as this was happening.  Due to being blind I opened the 32 bit version where everything worked correctly and it was not until checking the folder with explorer that I saw the 64 bit version had done the job.  Needles to say, I am leary of using it's converted file.
    Both the 32 and 64 bit version flicker when loading from Bridge, but not when loading as a standalone.
    Of interest, with the exeption of OnOne, where the UAC has to be turned off and the system restarted before it would load, all other plug-ins seem to work OK.
    I'm not complaining, just sharing my findings in the hope it helps getting these issues remedied.
    If anyone has found solutions to the above, I'd love to hear from you.
    Cheers,
    Michael

    Your system looks great. I have two 300 gig velociraptor running just sata. I don't run RAID
    I don't see where anything could be causing the issues in your system
    Here is a windows 7 tweaking guide I used. Pay attention to the magnifier option (second one down). It might hold a clue for you. I don't know if it not playing well with CS4 (or not a issue at all). Just interesting.
    Anyways, there are a lot of tweaks that I used to speed Windows 7 up. There are a lot of others on the net too.
    http://www.maximumpc.com/article/features/20_windows_7_tweaks_tips_%E2%80%93_every_secret_ uncovered_date
    hope the link posts this time

  • Could not create WMI locator class (80040154) - Win7 x64 OSD

    Hello All,
    I'm attempting to deploy a Win7 x64 OS to a Dell Optiplex 3010 through SCCM 2012 via PXE, a process I've done many times in the last few months. All of a sudden, on this one machine, I can't get it to work.
    The first strange thing that happened is, after the initial check for a PXE server I am told to "Press F12 for network service boot". I've never seen that before on any other system. Secondly, after supplying the password to begin the OSD process
    I'm met with error message 80040154. An excerpt from my log file is below:
    spLocator.createInstance( ((bUseAdminLocator == true) ? CLSID_WbemAdministrativeLocator : CLSID_WbemLocator ) ), HRESULT=80040154 (e:\nts_sccm_release\sms\framework\core\ccmcore\wminamespace.cpp,264)    TSPxe    1/8/2015 10:00:45
    AM    268 (0x010C)
    Could not create WMI locator class (80040154)    TSPxe    1/8/2015 10:00:45 AM    268 (0x010C)
    spNamespace.Open(c_szCIMv2Namespace), HRESULT=80040154 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,604)    TSPxe    1/8/2015 10:00:45 AM    268 (0x010C)
    Failed to connect to WMI namespace \\.\ROOT\CIMV2 (Code 0x80040154)    TSPxe    1/8/2015 10:00:45 AM    268 (0x010C)
    TS::Policy::GetClientIdentity (&m_oHttpTransport, m_sSiteCode, sMediaGuid.c_str(), m_sClientGUID, m_sNetbiosName, bUnknown, sServerNames, sImportedClientIdentity), HRESULT=80040154 (e:\qfe\nts\sms\framework\tscore\tspolicy.cpp,867)    TSPxe  
     1/8/2015 10:00:45 AM    268 (0x010C)
    I see this error happening for people attempting a Win 8.1 OSD without the proper WMI file. But that's not what I'm trying to do. This exact process has worked on many other Optiplex 3010's and 3020's since May when I started using it. Any suggestions?

    Ok, here's what was happening. Boy do I feel stupid.
    When I went to enter this latest batch of computers into SCCM, I went into the BIOS, copied the MAC, and used it as I should to import the system into SCCM. I assigned it to my OSD collection, then deployed my OSD TS to that collection. This is when I started
    having major issues. Reason being: I transposed two of the digits in the MAC I entered. As a result, the computer booted as part of the “Unknown Systems” collection and was assigned a generic OSD TS that didn’t contain the necessary drivers to complete. I
    never assigned a TS to that collection, and I'm the only one that's been using SCCM for OSD. I can only assume someone else was playing around with it trying to learn and did this themselves.
    When I removed the outdated boot image the Unknown Computers TS was supposed to use, I began being unable to even PXE boot (of course). After trying many and varied solutions (including double-checking the MAC I had written down
    incorrectly), thinking it was a PXE or boot image issue I began looking at the PXE boot logs on my DP. I noticed it kept saying that there were no advertisements to this system, which made no sense. I had deployed an OSD TS to it 5 minutes ago! I finally
    noticed the MAC address was incorrect and fixed it. Guess what? It’s imaging as I type.
    Thanks for all the help guys - lesson learned.

  • [s205] How to install Win7 x64 from scratch on a new hdd?

    Hello,
    I have a little problem to solve...
    I own a s205. My hard drive died. I replaced it with a new one. After that I tried to install Win7 x64. During the install it created 2 small partitions. It was strange to me, I saw it for the first time. Later I read that this is because of UEFI.
    Anyway, everything installed good, but after installing drivers I encountered few problems. Neither of net card were working. I started to look for some informations and I know that the problem is UEFI.
    My question - can anyone write a guide how to install Win7 x64 on s205 in Legacy mode, so everything would work like before? Unfortunately I don't have any rescue dvds or any other source of Lenovos images.
    Regards,
    Daniel
    Solved!
    Go to Solution.

    hi bean.
    did you install the drivers without any issue?
    ( installed power management and activates the wireless? )

  • Z87-G45 Gaming not able to install Win7 x64 with Samsung 840 EVO

    I have a brand new:
    i5 4570
    MSI Z87-G45 Gaming
    250GB Samsung 840 EVO
    1x 8GB Corsair ValueRam DDR3 1600
    I got everything hooked up properly, but I am not able to install Win7 x64 through an USB pen drive (Kingston Datatravel 32GB USB3) I have a proper  official and Legit MSDN ISO, formatted by the Win7 USB tool from MS itself.
    Note that i do not have an optical device (DVD) installed so I cannot use it 'the old way'.
    Bios settings are okay, everything is recognized
    USB Legacy - Kingston Datatraveler
    HDD Legacy - Samsung 840 EVO
    Win7 setup loads properly; but before I can select the Harddrive / SSD to install Win7 on I get prompted that additional (3rd party) drivers are needed to proceed. The volume is not recognized. This happens 9 out of 10 times. In the 10% cases I do get the option to format the SSD and/or create partitions. However, installation fails after all, cannot load or find file ...
    What I've tried so far:
    Switch out the SATA cables and power cables
    Switch through the various SATA ports on the MB 1 through 6
    Tried UEFI and UEFI/Legacy (UEFI doesn't seem to work at all)
    Update UEFI to V 1.50
    All the above result in the case mentioned.
    I have succesfully installed the SSD in an other PC, using the same pen drive and ISO and it worked like a charme, thus ruling out that the SSD, pen drive or image is corrupt.
    Even when I switched out the SSD after Win7 setup has succesfully copied, unpacked and installed all the files (doing this on the other machine where it works like a charm). Then switching it to the MSI Z87...it fails; starting the setup procedure right from the start, like nothing was ever written on the SSD...
    Finally i turned to Win8, and guess what, it installed without any glitches on the MSI Z87
    What am I missing here, I would really want to install Win7 instead of Win8
    Forgot to enable / disable something in the UEFI? I really don't know, google doesn't give much information on this specific problem (SSD is recognized properly by the BIOS / UEFI as far as I can tell)
    The only thing I have not tried out so far is updating the Samsung SSD firmware to the 1.0 version which has been release 3 days ago...
    Any clues, tips, hunches??

    Quote from: Bernhard on 25-October-13, 18:33:41
    Did you disable Secure Boot in the BIOS? If not, then Win7 won't load.
    Hmmm not sure, thanks for the reply, will have to look into that later today!
    I didn't change it from the default setting I think, unless it is part of the Win8 features in the UEFI. All where disabled by default, and I kept them disabled.
    Where is Secure Boot listed in the UEFI, and any idea wether it is enabled by default?
    ::EDIT::
    Found it in some screenshots, I cannot recall from the top of my head wether it was enabled or disabled, allthough my gutt feeling says it already is disabled.
    http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/09-MSI_SnapShot_23.gif
    http://cdn.pcper.com/files/imagecache/article_max_width/review/2013-05-31/10-MSI_SnapShot_24.gif
    Nice overview of the entire UEFI btw: http://www.pcper.com/reviews/Motherboards/MSI-Z87-GD65-Gaming-Motherboard-Review/BIOS-Features-continued

  • PrE-10 Will not start in Win7(x64)

    I sincerely hope this is not redundant, but I have spent days on this forum looking for answers, but with no luck. I have seen many similar questions, but none of the 'fixes' proposed are relevant, or do not work for me.
    History:
    I have been running PrE-10 since its release, on Win-7(32-bit). I recently had a system crash after installing Windows-8 Beta and had to wipe my hard drive and start from scratch. This time I loaded Win-7 (x64). All my original apps I had stored on an external drive. Some re-installed, some not. I had to re-download PSE-10, and PrE-10 as 64-bit apps.
    PSE-10 and the associated Organizer, work fine as before. PrE-10 however does not start. I get the splash screen, with the options of NEW, OPEN and Organizer. Of these, only Organizer opens. The other two options either bring up a Windows Error box 'Pre-10 has failed to start', or it just sits and does nothing.
    It is not a system limitation as I have far more than the requirements needed to run it and as I said, it worked fine in the 32-bit version, and nothing else has changed (that I have input), so I am baffled.
    As I said, I have done many of the proposed fixes I have seen on the forum, if they are pertinent to my system, and even some that were not. I have now completed the reinstallation of most of my applications, and so far only PrE is causing a problem, but it is very important to me as I am working on a project that requires it.
    I have done a Belarc report, but I do not see a link to upload it. I see links for images, videos, tables and weblinks, but nothing for files (pdf). I will attempt to load it as an image and see if this works. I do not want to post it as text or HTML as it is 7 pages long! (Nope, it does not insert). Perhaps someone can tell me how to upload the file.
    Here is a system summary:
    OS Name
    Microsoft Windows 7 Ultimate
    Version
    6.1.7601- Service Pack 1 Build 7601
    Other OS Description
    64-bit
    OS Manufacturer
    Microsoft Corporation
    System Name
    DOUG-IQ775
    System Manufacturer
    HPQOEM
    System Model
    SLIC-CPC (TouchSMart IQ-775)
    System Type
    x64-based PC
    Processor
    AMD Turion(tm) 64 X2 Mobile Technology TL-58, 1900 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date
    American Megatrends Inc. 5.15, 11/26/2007
    SMBIOS Version
    2.4
    Windows Directory
    C:\Windows
    System Directory
    C:\Windows\system32
    Boot Device
    \Device\HarddiskVolume1
    Locale
    United States
    Hardware Abstraction Layer
    Version = "6.1.7601.17514"
    User Name
    DOUG-IQ775\DOUG
    Time Zone
    US Mountain Standard Time (AZ)
    Installed Physical Memory (RAM)
       4.00 GB
    Total Physical Memory
       4.00 GB
    Current Available Physical Memory  1.68 GB
    Total Virtual Memory
               8.00 GB
    Available Virtual Memory
               5.32 GB
    Page File Space
               4.00 GB
    Page File
    C:\pagefile.sys
    STORAGE
    USB Flash Memory, s/n 001D0F1FCF2DC8C08406020B, rev 1.00
    Generic Flash Disk -- drive 8, 8GB s/n 03483DBB, rev 8.07
    WDC WD16 00BEVS-60RST0 -- drive 7, 160GB  s/n WDC WD1600 WD-WXC108351497
    Generic CF Reader -- drive 5, s/n 058F12M111B, rev 1.01
    Generic SM/SD/MS Reader -- drive 6, s/n 058F12M111B, rev 1.00
    Century EX35SW4_SB4-A USB Device -- drive 1, s/n 011E011D3B, rev 0100
    Century EX35SW4_SB4-B USB Device -- drive 2, s/n 011E011D3B, rev 0100
    Century EX35SW4_SB4-C USB Device -- drive 3, s/n 011E011D3B, rev 0100
    Century EX35SW4_SB4-D USB Device -- drive 4, s/n 011E011D3B, rev 0100
    HARD DRIVES
    c:/D:(NTFS on drive 0) *
    500.11 GB
    k: (NTFS on drive 7)
    160.03 GB
    w: (NTFS on drive 1)
    250.06 GB
    x: (NTFS on drive 2)
    250.06 GB
    y: (NTFS on drive 3)
    250.06 GB
    z: (NTFS on drive 4)
    250.06 GB
    WDC WD16 00BEVS-60RST0 USB Device [Hard drive K:] (160.04 GB) -- drive 7, SMART Status: Healthy
    WDC WD50 00AAKS-65TMA SCSI Disk Device (500.10 GB) -- drive 0, s/n WD-WCAPW3069745, SMART Status: Healthy
    Drives new – drive encryption
    Memory Modules c,d
    1660.37 Gigabytes Usable Hard Drive Capacity
    914.49 Gigabytes Hard Drive Free Space
    CD/DVD
    TSSTcorp DVDR/RW TS-T632L ATA Device [Optical drive]
    Software Versions & Usage
         i  Adobe Download Assistant
         i  Adobe Help
         i  Adobe Photoshop Elements Editor Version 10.0
       ı i  Adobe Photoshop Elements Version 10.0
       ı i Adobe Premiere Elements Version 10, 0, 0, 0
         i  Adobe Systems Incorporated - Elements Organizer Version 10.0
       ı i  Adobe Systems Incorporated - ElementsAutoAnalyzer Version 10, 0, 0, 0
           Adobe Reader and Acrobat Manager Version 1.5.7.0
        i  Adobe Reader Version 10.1.3.23
         i  Adobe Systems, Inc. - Shockwave Flash Version 11,3,300,270
       ı i  Adobe Updater Startup Utility Version 2.2.0.2 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)
       ı i  Adobe® Flash® Player Update Service Version 11,3,300,270
         i  Amazon MP3 Downloader Version 1.0.0.0
         i  Any Audio Converter Application Version 3, 3, 8, 1
         i  Any DVD Converter Application Version 4, 0, 1, 1
       ı i  Apple Inc. - QuickTime QuickTime 7.7.2 (1680.56)
       ı i  Apple Push
         i  Apple Software Update Version 2.1.3
       ı i  Belarc, Inc. - Advisor Version 8.2g
         i  Canon IJ Driver Uninstaller Version 1.2
         i  Canon IJ Utility Uninstaller Version 1, 3, 0, 0
       ı i  CANON INC. - CNSLMAIN.EXE Version 1, 4, 3, 0
         i  CANON INC. - MP Navigator EX Version 1, 0, 7, 0
         i  CyberLink - CLDownloader Version 2.3.0.2715
         i  CyberLink - DZM Version 2.05.3206
       ı i  CyberLink Corp. - PowerDirector Version 9.0.0.2930
       ı i  Google Chrome Version 21.0.1180.75
       ı i  Google Update Version 1.3.21.103
       ı i  GSpot Codec Information Appliance Version 2, 7, 0, 1
       ı i  Igor Pavlov - 7-Zip Version 9.20
       ı i  INR Desk Version 2.0.0.0
       ı i  Microsoft Corporation - Internet Explorer Version 9.00.8112.16421
       ı i  Microsoft Corporation - Windows Installer - Unicode Version 5.0.7600.16385
            Microsoft Corporation - Windows® Search Version 7.00.7600.16385
       ı i  Microsoft Malware Protection Version 4.0.1526.0
         i  Microsoft Network Inspection System Version 4.0.1526.0
       ı i  Microsoft Security Client Version 4.0.1526.0
         i  Microsoft ® Windows Script Host Version 5.8.7600.16385
       ı i  Microsoft® .NET Framework Version 2.0.50727.4927
         i  Microsoft® .NET Framework Version 3.0.6920.5011
         i  Microsoft® .NET Framework Version 4.0.31106.0
       ı i  Microsoft® CoReXT Version 7.250.4232.0
       ı i  Microsoft® Windows® Operating System Version 12.0.7600.16385
         i  OpenOffice.org 3.4 Version 3.04.9590
         i  OpenOffice.org Base Version 3.04.9590
         i  OpenOffice.org Calc Version 3.04.9590
         i  OpenOffice.org Draw Version 3.04.9590
       ı i  OpenOffice.org Impress Version 3.04.9590
         i  OpenOffice.org Math Version 3.04.9590
         i  OpenOffice.org Writer Version 3.04.9590
         i  OpenOffice.org Writer(Web) Version 3.04.9590
       ı i  Orbitdownloader.com - Orbit Downloader Version 4, 1, 1, 1
         i  PlotSoft L.L.C. - PDFill PDF Editor with FREE PDF Writer and PDF Tools Version 9.0.0.9
         i  PlotSoft LLC - PDFill FREE PDF and Image Writer Version 9.0.0.9
       ı i  Realtek - ReStart Application Version 500, 1001, 719, 2007
       ı i  Realtek - RtlService Application Version 700, 1004, 1207, 2009
       ı i  RichVideo Module Version 2.0.1.5417
         i  Safer Networking Limited - Secure Shredder Version 1.9.0.0
         i  Safer Networking Limited - Spybot - Search & Destroy Version 1, 5, 2, 0
         i  Safer Networking Limited - Spybot - Search & Destroy Version 1, 6, 0, 30
         i  Safer Networking Limited - SpyBot-S&D Version 1, 6, 2, 0
       ı i  Safer Networking Ltd. - Spybot - Search & Destroy Version 1, 6, 0, 0
         i  SmartSound Sonicfire Pro Version 5.7.1
         i  Sun Microsystems, Inc. - Java(TM) Platform SE 6 Version 6.0.0.105
         i  The Audacity Team - Audacity® Version 1,3,13,0
    Can anyone help me get this app going... please!!
    Thanks in advance!
    DN

    This is frustrating! I just answered this post at length, but when I posted it it disappered!
    Guess I have to start over and hope for the best!
    Is that an HP laptop?
    No, it is a desktop. However it is an HP 'hybrid'  all-in-one, and uses a lot of laptop hardware and software to keep the low profile case.
    -HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
    I read this and it does not apply to my system.
    Otherwise, unless I missed it, I do not see mention of your graphics/video card brand/model and driver number
    This is why I asked how to upload the Belarc report! Too much info to post.  Here is the Graphics info.
    Name
    NVIDIA GeForce Go 7600
    PNP Device ID
    PCI\VEN_10DE&DEV_0398&SUBSYS_2A40103C&REV_A1\4&1BC86A40&0&0020
    Adapter Type
    GeForce Go 7600, NVIDIA compatible
    Adapter Description
    NVIDIA GeForce Go 7600
    Adapter RAM
    256.00 MB (268,435,456 bytes)
    Installed Drivers
    nvd3dum,nvd3dumx.dll
    Driver Version
    7.15.10.9804
    INF File
    oem12.inf (nv_NV3x section)
    Color Planes
    Not Available
    Color Table Entries
    4294967296
    Resolution
    1440 x 900 x 59 hertz
    Bits/Pixel
    32
    Display
    Nvidia Flat Screen [Monitor] 19.25" vis
    Driver
    c:\windows\system32\drivers\nvlddmkm.sys (7.15.10.9804, 5.73 MB (6,006,696 bytes), 1/25/2007 6:43 PM)
    Check the ATI or nVidia or ??? website to be sure you have a current driver
    Another interesting story, that! Nvidia/GeForce does an auto detect and correctly identifies the graphics card, and sends me to a link to upgrade the driver. The driver page says it is for Vista x64 and Win7 x64 (even its long name has 'win7-x64' in it). I download and attempt an install, and it comes back with "you are running Windows 7 64-bit. This driver is for Vista only. Installer closing." I went back and tried 4 other Win-7 x64 drivers, all reported the same thing, even though they state on the site they are for Win7 x-64. I then went to the Device Manager and tried to update the driver, but it reported using 'the most current driver available'. So I uninstalled the current Nvidia driver, which put me into VGA mode. I then went to Windows Update and did a search for updates. It found a missing Nvidia driver and called it 'Nvidia Driver for Win7 x64'. I downoaded and installed it and my system returned to normal 1440 x 900 display. I checked the driver info and it is the same driver as the original, including the release date, so apparently the original driver was in fact x64 compatible, and there does not appear to be an updated driver for it.
    Also, for laptops... if that is what you have
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modul es.html
    -http://forums.adobe.com/thread/1001579
    It is not a laptop, but as it uses many laptop softwares and hardware, I will check these and see if they help. I will post the results.
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    There are no DISPLAY options in my BIOS setup. There is also no update available for the BIOS from HP
    Thanks for the help.
    DN

  • Adobe programs don't work on Win7 x64 with IE8 x32

    I have been working for the last 2 hours trying to get adobe flash 10.1 downloaded and installed on Win7 x64 and IE8 x32.  It downloads and crashes and never finishes the install, even though sometimes the adobe site tells me it's installed.  when I access a website it asks to download the flash player each and every time.
    Mind you I don't have a lot of time to troubleshoot and fix adobe issues.  I have clients to take care of and if your not going to make  your product easier to use then I will block all adobe flash sites from my clients computers.  Needless to say this will make them angry at me but let me tell you I don't forgive.  I will bash you each and every time a client calls me.

    I don't understand - in your post you mention "new Flash Player" several times, but in the subject you mention 10.2...?
    What is the exact FP version you have?
    For your blue box problem, have you tried to disable Hardware Acceleration?

  • IPhone name not recognized by Win7 x64

    Hi,
    I have 2 iPhone 4, both are using one Apple universal docker to connect to PC, phone has its own name, and diaplay properly on PC wherever the device name is used, ie, under My Computer, Portable Devices. iPhone 4 are shown as A's iPhone or B's iPhone, as Digital Camera.
    I encountered this issue after installed iTunes 10.5 or upgraded to iOS 5, I am not sure which one caused the problem. The issue is, B phone is no longer recognized as B by Win7 x64, while A phone has no problem at all, both are with iOS 5.
    When I put B phone to docker or even connect to PC directly, it is always recognized as A, the device name is always A's name, but the content (camera photo etc) is still B's content.
    When using iTunes, phone's name displays correctly.
    I connected B phone to another USB port which is never used by iPhone before, Win7 detected and tried to download/install and finally, B phone is shown as Apple Portable Device, no Phone Name, not as Digital Camera as before. Again in iTunes, both phones are shown correctly with their own name.
    Not a big issue but a little bit confused, how to correct device name here?
    Thanks

    Type "iphone not recognized by itunes" in the search box at the top of this page.

  • Administrator account is disable when deploying windows 7 x64 captured image

    I’m using MDT 2012 update 1. I create one deployment share with two task sequence.
    The task sequences are: one for windows 7 x86 and the other one is windows 7 x64.
    Both are working fine until I try to sysprep and capture with all the windows updates.
    Sysprep and capture windows 7 x86 with all windows update work fine. I’m able to deploy the captured image without an error.
    My problem is with the windows 7 x64 captured image. I’m able to sysprep and capture the windows7 x64 with all the windows update. Once the capture is completed, I change the .win file in my windows 7 x64 task sequence to point to the new .win file (capture
    image with all the windows update). When I deploy windows 7 x64 on a pc, the OS get install but boot up to the sign on screen. The Task sequence does not complete. No error message. Cannot log in as local or domain administrator, account is disable.
    Why does it work with my windows 7 x86 image and not with my windows 7 x64 image?
    With my windows 7 x86 image the task sequence completed successfully with no error and it logon automatically in windows but not with my windows 7 x64 image.
    Both task sequences are the same.
    Let me know if any info for this please.
    thanks

    They should both work, perhaps you missed a step when creating the x64 image.
    1. Verify that the Windows 7 x64 image was created cleanly, with no errors. Sysprep ran with no errors.
    2. Verify that you created the windows 7 deployment task sequence cleanly. I would do a windiff of the TS.xml and unattend.xml file from both folders in the deployment share.
    3. Try running without a domain. Some domain's have a GP set to disable the local administrator account.
    Keith Garner - keithga.wordpress.com

  • ITunes (Win7 x64) is no longer opening after the latest version update

    iTunes (Win7 x64) is no longer opening after the latest version update - I have attempted an un/reinstall - can anyone offer other suggestions?
    I am running Windows 7 64-bit, and am trying to reinstall the 64-bit iTunes from the iTunes website.  I previously have had this working for the last few years with no major issues, the Apple Software Updater has been pestering me for some time so I finally got it to update.  However now iTunes will not start, if I select the icons nothing happens.  There are no iTunes applications running in the background in Task Manager either.
    I look forward to your suggestions.
    Thanks,
    James.

    1. First check if this file APSDaemon.exe is the problem here.
    Close your iTunes.
    Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
    Now open itunes and see if it is working?
    If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
    MSCONFIG
    Hit ENTER
    Click STARTUP Tab, Uncheck "Apple Push", click OK.
    Restart Windows.
    2. If that fails, refer to following article to remove SC Files
    http://support.apple.com/kb/TS2363
    3.  If that fails, repair or reinstall your Quicktime.  START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REAPIR.

  • Photoshop CS4 (64bit) & Win7 x64 problem fixed

    I just wanted to post this to help anyone who might be having this problem.
    Here's the problem. When you use Photoshop's lasso tool, you can press ALT at the same time, and it would turn into a magnetic lasso tool that you can use to make straight lines.
    Well, what would happen is that I would be making a selection, and then suddenly the screen (both screens, as I'm using a dual screen setup) would flicker, and the selection would complete by itself, and I would be SOL, as, obviously, the selection is not what I wanted.
    I could replicate this without fail. I'm halfway done with making a perfect selection, and bam!, this crap happens, and I have to start all over again. It happens ALL the time, no matter what Photoshop setting I used. Photoshop was completely updated, and all my device drivers (video card, mouse drivers, etc.) were all at their latest. So I started looking outside Photoshop, as I was thinking it might be another software problem.
    After much trial and error, I narrowed it down to Task Manager. I had Task Manager running in my tray. If I closed Task Manager (not minimize, close), restarted Photoshop, and made my selection using the lasso tool, the issue would go away, but would come back randomly.
    The fix? Run Photoshop CS4 in Vista compatibility mode. This solves the problem completely.
    I know a lot of you will probably say that you have Photoshop CS4 running flawlessly on Win7 x64, but I have 3 computers, each with completely different configurations, one of them being a laptop, that I was able to replicate this on. Once I ran Photoshop in Vista compatibility mode on each computer, the problem was completely solved.
    So I hope this helps anyone who has run into this problem.

    I confirm he is a blond wanna be.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    Hudechrome wrote:
    It won't work for me. I never used Vista.
    (I will neither confirm or deny I am a blonde!)
    Thanks for sharing.

  • Premiere CS5 (win7 x64) won't recognize my Mini-DV camcorder.

    I have Premiere Pro CS5 installed on a Windows 7  64-bit system.
    When I try to Capture, I keep getting the error message:  "Can't Activate Recorder. Try Resetting Camera."
    the whole set-up worked fine on my XP system with Premiere Pro 1.5.
    Extra info:
    The Mini-DV camcorder is a Panasonic NV-DS33   (but personally I think it has nothing to do with my camera because I have seen so many threads online regarding this issue and no-one has any decent answer!)
    the firewire cable is fine because it works on my old XP computer.
    in premiere, if I change the camera to an HDV, then suddenly I can CONTROL the camera, but I can't capture)
    Windows 7 (x64 bit) recognizes the Camcorder in the Device Manager (and says it is working properly).
    I have tried several other DV capturing softwares (Stoik, Scenalyzer, WinDv). I have even tried my old Premiere Pro 1.5 on my 64-bit system.. and NONE OF IT WILL CAPTURE MY CAMCORDER!
    This is very frustrating. I need my new win7 (x64) Premiere CS5 to capture successfully. I have spent a LOT of money on this new system. What on earth is the problem?
    (i saw one thread on a similar issue regarding a 32-bit installation of Win 7, and it is marked as ANSWERED! but in my opinion, (from the amount of forums on many other sites) this issue is definitely not fixed.
    is there any update to Premiere CS5? or a workaround? or anything else I should know?
    PS: it is not an option for me to keep using my old computer to Capture video and then transfer it to my new system. i am passing my old system on to another person.
    many thanks
    Marc
    [email protected]

    I agree that the "Legacy" FW driver solution should be a stickie, or FAQ. Since Win7-64 was released, it has caused no end to the grief. Maybe Jeff, or Todd will have a better solution to getting the word out.
    It was Harm Millaard, who brought that to MY attention, and he's posted it to many, many threads. In nearly every case, it's solved the issue.
    Good luck, and thanks for reporting Colin's success,
    Hunt
    PS - per your suggestion, I just published this "fix" in the Tips & Tricks sub-forum for PrElements.

  • PS6b1: "The GPU Sniffer Crashed" Win7 X64

    PS CS6B1 reports "Photoshop detected an error in your display drive" and disables GPU settings when running on Win7 x64 system with Asus EAH 6970 (AMD Radeon 6970) graphics card.  I verfied that the latest Asus/AMD drivers are installed and working properly.
    Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 3200 MHz
    Built-in memory: 24566 MB
    Free memory: 18591 MB
    Memory available to Photoshop: 22238 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    The GPU Sniffer crashed on 3/24/2012 at 8:27:58 AM
    Display: 3
    Display Bounds:=  top: 146, left: 2560, bottom: 1226, right: 4480
    Display: 2
    Display Bounds:=  top: 178, left: -1920, bottom: 1258, right: 0
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1440, right: 2560
    No video card detected
    Serial number: Tryout Version
    Application folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: E:\scratch\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      E:\, 1.82T, 1.70T free
    Required Plug-ins folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: E:\programs\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1642  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   5,0,10,0  
       AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
       BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
       3D Studio 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Accented Edges 13.0
       Adaptive Wide Angle 13.0
       ADM 3.11x01
       Angled Strokes 13.0
       Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Bas Relief 13.0
       BMP 13.0
       Chalk & Charcoal 13.0
       Charcoal 13.0
       Chrome 13.0
       Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Color Halftone 13.0
       Colored Pencil 13.0
       CompuServe GIF 13.0
       Conté Crayon 13.0
       Craquelure 13.0
       Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Crop and Straighten Photos Filter 13.0
       Crosshatch 13.0
       Crystallize 13.0
       Cutout 13.0
       Dark Strokes 13.0
       De-Interlace 13.0
       Dicom 13.0
       Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Diffuse Glow 13.0
       Displace 13.0
       Dry Brush 13.0
       Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Embed Watermark 4.0
       Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Extrude 13.0
       FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fibers 13.0
       Film Grain 13.0
       Filter Gallery 13.0
       Flash 3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Fresco 13.0
       Glass 13.0
       Glowing Edges 13.0
       Google Earth 4 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Grain 13.0
       Graphic Pen 13.0
       Halftone Pattern 13.0
       HDRMergeUI 13.0
       IFF Format 13.0
       Ink Outlines 13.0
       JPEG 2000 13.0
       Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Lens Blur 13.0
       Lens Correction 13.0
       Lens Flare 13.0
       Liquify 13.0
       Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mezzotint 13.0
       Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Mosaic Tiles 13.0
       Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Neon Glow 13.0
       Note Paper 13.0
       NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Ocean Ripple 13.0
       Oil Paint 13.0
       OpenEXR 13.0
       Paint Daubs 13.0
       Palette Knife 13.0
       Patchwork 13.0
       Paths to Illustrator 13.0
       PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Photocopy 13.0
       Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Pinch 13.0
       Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Plaster 13.0
       Plastic Wrap 13.0
       PNG 13.0
       Pointillize 13.0
       Polar Coordinates 13.0
       Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Poster Edges 13.0
       Radial Blur 13.0
       Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Read Watermark 4.0
       Reticulation 13.0
       Ripple 13.0
       Rough Pastels 13.0
       Save for Web 13.0
       ScriptingSupport 13.0
       Shear 13.0
       Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Smart Blur 13.0
       Smudge Stick 13.0
       Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Spatter 13.0
       Spherize 13.0
       Sponge 13.0
       Sprayed Strokes 13.0
       Stained Glass 13.0
       Stamp 13.0
       Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Sumi-e 13.0
       Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Targa 13.0
       Texturizer 13.0
       Tiles 13.0
       Torn Edges 13.0
       Twirl 13.0
       U3D 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Underpainting 13.0
       Vanishing Point 13.0
       Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Water Paper 13.0
       Watercolor 13.0
       Wave 13.0
       Wavefront|OBJ 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       Wind 13.0
       Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
       ZigZag 13.0
    Optional and third party plug-ins:
       Camera Raw 7.0
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

    What display driver version do you have?
    Try this:  Go to the ATI web site (really, it's the AMD web site), and locate and download/install the latest Catalyst package for your hardware and OS (if memory serves, it's 12.3).
    -Noel

  • T440p hotkey integration driver fail - win7 x64

    Brand new T440p laptop out of the box.
    Imaged with preconfigured company Windows 7 x64 image I have used hundreds of times before via MDT.
    WDS packaged T440p drivers (downloaded from Lenovo website) are injected as part of the MDT installation process.
    All windows updates applied (except for the Lenovo PM Device Driver otherwise the thing no longer reboots or shuts down properly anymore)
    BIOS flashed to latest T440p revision.
    Run Lenovo System Update to install hotkey drivers and receive the following:
    As you can see Win7 x64... driver says no.
    Restarted and tried again... error.
    Tried downloading the driver manually from http://support.lenovo.com/ca/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t44...
    Same error.
    Searched for and downloaded version 5.40
    Same error.
    I ran Lenovo System Update 2 days ago on another T440p laptop, may have been a slightly different internal spec... not sure but I'm farily sure the driver was named differently in System Update. The driver Installed on that machine fine and functions as intended.
    The driver could very well could have been updated since then I guess.
    I do also know this is a newer batch of T440p's as the box configuration that it ships in has changed and looks completely different.
    What gives?
    Moderator comment: Remark(s) contravening the Community Rules removed - profanity / implied profanity.
    Solved!
    Go to Solution.

    Just for giggles I decided to re-image the machine and see if it made a difference.
    This time I ran System Update BEFORE any windows update.
    Hotkey driver installed just fine.
    Maybe there's some windows update incompatibility.
    I'm not about to go testing all this stuff so if anyone from Lenovo actually reads these posts, it might be worth investigating...
    *shrug* 
    Moderator comment: Remark(s) contravening the Community Rules removed - profanity / implied profanity. Keep it clean.

Maybe you are looking for