Win8 & cs 6 64 bit problem

windows 8/64 bit & CS 6/64 bit freeze - load library failed with error 126: the specified module could not be found.
need to re-boot

this is a new version and computer] of both windows 8 and CS6 - both have all the latest updates, 32 bit version of CS6 seems to work fine. Used photo shop 6 for many years, still find my way around CS6.

Similar Messages

Product: HP Pavillion dv5 Operating System: Windows 7 64-bit Problem: Smart Hard Disk Error

Product: HP Pavillion dv5
Operating System: Windows 7 64-bit
Problem: Smart Hard Disk Error
Disk Name: WDC WD3200BEKT-60V5T1
How do I fix this error?

Hi,
If you're starting to get Smart warnings, it's probably best to think about replacing the Hard Drive - at the very least, make sure you have a current back-up of all your personal files etc in case the drive fails suddenly.
If you'd like a guide on replacing the Hard Drive, please post back with the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have a little bit problem with verify my apple ID, I don't get any message for verification aplle ID from Apple. Why? Anyone can help me

Dear all,
I have a little bit problem with verify my apple ID, I don't get any message for verification aplle ID from Apple. Why? Anyone can help me

Hi Tep Virak,
Thanks for visiting Apple Support Communities.
You may want to log into your Apple ID first to double-check that it's the right email address and re-send the verification email using these steps:
Sign in to My Apple ID to manage your account information.
Click Resend under Primary Email Address.
From:
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/he68
All the best,
Jeremy

HP 2000 - 2c12NR: Removed Win8, Installed Win7 64-bit; Touchpad Problems

Greetings HP forums!
My name is Bob and I am having an issue with an HP 2000 laptop. A friend requested I remove Windows 8 from a laptop, and install Windows 7 since he was much more familiar with the old GUI.
I installed Win7 64-bit and am having issues with the touchpad consistently working correctly. I have let Windows use its generic drivers, and have installed the Win8 Synaptics touch pad driver/utility. Both drivers produce the same problematic results. The strange issues I am having are as follows:
- Touchpad works fine for 5-30 minutes
- Touchpad becomes inoperable for varying amounts of time; 1-5 minutes
- Touchpad starts working again, but requires higher than normal pressure to work OR only works on the RIGHT side of the touchpad
- Touchpad stops working again, and then after swirling/twirling my finger around the touchpad it will start moving itself without any further input to the Touchpad at all. Everytime it starts moving on its own, it exhibits the same behavior. It moves only vertically, in a perfectly straight line, roughly 2/3 the heighth of the screen, and is very choppy skipping up and down; This lasts for 10-30 seconds.
- After it's done 'ghosting' the cursor up and down, the Touchpad is usable again, but is very finnicky. It requires excessive pressure or response is very laggy/inaccurate to the touch you are inputting.
- Typically after a reboot it works perfectly fine for a short amount of time, and then starts acting as I have described above.
I have tried altering any and all of the settings in the Synaptics driver utility to no avail. I have uninstalled/reinstalled, enabled/disabled the hardware/drivers numerous times. Each time either drivers are removed and installed it will work fine for a short amount of time and then go back to acting crazy.
I thought the ribbon cable may have been loose, so I opened the laptop up far enough to check the ribbon cable for the Touchpad. All was well, everything was snug.
At this point I am thinking there is an issue with the Touchpad itself. While I am waiting for a reply I am going to try reinstalling Win7 since I have exhausted all other ideas I have.
Any and all information is greatly appreciated.
Thank You,
Bob Melchert
ChicagoLand Geeks
*EDIT*
I just started the process to re-install Windows. Once files were finished loading and the initial install screen had loaded, (where you select Language, Time/Currency Format, and Keyboard input method) the Touchpad immediately started moving vertically on itss own. Once it stopped moving on its own, I am only able to move the cursor vertically in the spot where it was moving itself; Any input to the Touchpad only allows vertical movement. This is the first time I have encountered this issue. Since this is happening with Windows loaded into RAM, I am becoming more certain this is a hardware issue.

Hello disgrntld,
Welcome to the HP Forums!
I understand there is no audio coming from the computer. Before anything else, I would suggest a manual uninstall and reinstall of the sound driver:
1. Go into Device Manager, then "Sound, video and game controllers".
2. Look for the Audio driver. Right-click on it and select "Uninstall". Do not restart the computer.
3. Restart the computer. It will force the computer to detect the hardware and install an appropriate driver.
Please let me know your results. Thanks!
Mario
I worked on behalf of HP.

Need Help: TS130 Server and Windows Server 2008 R2 64 Bit Problems

I have 2 TS 130 Lenovo Servers with Xeon 3.2 Ghz CPUs and 16GB of memory. Installing ANY version of Windows 64 Bit after a couple of reboots will cause the system to blue screen. Once it blue screens it is impossible to get back into Windows.
Get this. Installing ANY version of Windows 32 bit works just fine on either machine. I have swapped out ram, hard drives, raid on raid off, updated BIOS etc and the same exact issue on both machines. I have swapped out media thinking maybe it was just a bad disk, but after 3 copies of Server 2008 R2 64 and 2 copies of Windows 7 Ultimate 64 and 3 copies of Windows 7 Professional 64 bit and THEN the same problem occurring over and over on BOTH servers.. well needless to say I am pulling mu hair out. These are ALL OEM copies by the way not burned copies.
I called Lenovo Thinkserver support as we are a partner, and their only suggestion was changing some legacy settings in the BIOS which of course has done nothing. I have changed every setting in the BIOS that I feel it could possibly be and still no joy.
Thinking it MAY have been a video problem, I have even went so far as to add new video cards to both machines and the problem still exists on both machines. All drivers are latest versions, and I am getting tired of getting everything setup, and then BAM BSOD.. I have been a tech for 25 years, and I have NEVER seen this issue on any machine ever..
As far as the BSODs, one time it will be the language pack error, next time something else, and the next time something else.. no way to nail down the problem.
I KNOW its a machine error, especially when 32 bit runs fine on either machine, but what it is I have no clue.
I am hopeful someone here has had the same issue and can tell me what they may have done to solve the problem. It is absolutely driving me up the wall....
Thanks in advance for ANY help or suggestions.
Mike at Mitek Computers

Never mind.. FINALLY found the problem. Even though I swapped out media etc as far as Server 2008 went, I always used the same COA key.. guess what... English media and Japanese key.... snafu on our OEM vendors end I suppose.
Anyway I was issued a new product/virtual key through Microsoft and it resolved the issue.... stupidest thing I ever saw...
Mike at Mitek

Laserjet 1505 Windows 7 64 bit problems

Hello,
I work for a community college in the IT dept. We are currently upgrading our computers to Windows 7 64 bit OS. I have two computers which have a Laserjet 1505 with them. I have tried several combinations of drivers, including the downloadable CD equivalent software. I can get the test page to print out just fine but when i leave and the user try's to print anything it starts to go through a sequence of trying to print for at least 3 rotations. The error lights will flash in sequence and no error message pops up on the screen. If I log into a local admin account and try printing a test page the error will seem to go away, for a time at least. However printing on envelopes may slow down. It seems as though this may be a permissions issue. A power cycle will also seem to wreck havoc on the printer as well. I dont think this is a driver issue because things seem to change just by changing logged in user. However I could be wrong about that. Any help would be much appreciated.

I would first like to thank the HP tech support for all the help with this issue. Your dedication to your customers was pivotal in this 3 week long troubleshooting process.
Now for anyone out there who may have a similar problem and don't feel like being jerked around for more money by the greedy corporation HP, Ill share my fix for this issue.
Log in to an administrator account and then go to Devices and printers. Right click on the P1505 printer icon and select Printer Properties. Go to the security tab at the top. Select everyone and give them all the options in the check boxes that you can. This includes Manage this Printer, Manage Documents and Print. This solved the issue of the printer slowing down and "Practicing printing" before actually printing.
I don't know why these privileges were causing the printer to fault but it appears that there was some change in how the default settings operate between XP and windows 7.

Itunes 10 on Windows 7 64 bit problems

Hi
I installed Itunes 10 on my new Windows 7 64 bit laptop and since then, I only have problems:
1. Every time I lunch Itunes the message appears: windows is configuring Itunes...wait... then it starts. Don't know what this is but it is definitely annoying.
2. When I want to activate the PC, I receive the following message: Errors occured when saving Identification information. Try to repair Itunes...
I tried to do this but with no success!
Would appreciate if you could help me as I have several purchased records which I can only play if I can connect to my Itunes account!!!!
Thanks
Thomas

Try deleting the itunes shortcut and rebuilding a new one.
Post back if you need more info on that.

VoiceOver with iTunes 64 bit on Windows 7 64 bit problem

Is anyone using VoiceOver with iTunes 64 bit on Windows 7 64 bit?
We cannot get it to work. I have followed Apple's guideance and uninstalled/reinstalled iTunes and the .dll has been moved from the root directory of C: to the iTunes program directory.
I took the problem to the Genius Bar at a major Apple Store but they dont support Windows 7 or 64 bit.

I have again removed, rebooted then reinstalled iTunes and Voiceover is still not working with Windows 7 64 bit. I also am unable to find on any forum anyone who has it working.

IdeaPad Z370 and Ubuntu 11.10 64 bit - problem with volume buttons

I recently bought my new Lenovo IdeaPad Z370 without operating system and installed Ubuntu 11.10 64 bit (the pre-installed system was FreeDOS which I decided to remove).
Nearly all is working fine. The only exception are the volume keys: pressing them does start adjusting the volume, but causes a system problem. If I press sound up, the speakers move to immediately to the maximum volume and behave as it I was continuing to press the button.
The same happens when pressing the volume down or sound off buttons. It is then not possible any more to use the keyboard or type anyting, nor change the volume using the touchpad and Ubuntu's speaker symbol. It is also not possible any more to shut down the computer using Ubuntu's virtual shutdown button, but with the real button on the computer.
The touchpad is still working and after putting the computer briefly into standby the problem is solved to the degree that it is possible to use the keyboard etc. again, and the sound volume can be adjusted again with Ubuntu's speaker symbol.
I guess this must be a driver issue that ubuntu 11.1 does not support the buttons.
As well, the one-key-theatre button and the thermal-management button do not work. Pressing them, just nothing happens (except that the light up).
I should mention that installing Ubuntu apparently deleted the partitions including the one-key recovery button. At least this key does now only work like a second power-button. Unfortunately I did not receive the User-guide with the computer but only downloaded from the internet after installing Ubuntu.
I wonder whether apart from adjusting the volume buttons, it might be possible to get the one-key-theatre button and thermal-management-button operational for ubuntu too, and whether the one-key-recovery button could work under ubuntu too. Gparted tells me that I have 2 small partitions of 3.9 GiB each, labeled "extended" and "windows swap", and one of 1.02 GiB which is not in use apart from the main drive of course.

The issue you are encountering is due to driver absence in Linux.
The driver for Linux is not available. Hope, Ubuntu new version have more applications and drivers.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Flash CS5 Windows 7 64-bits problem

Hello and thank you for reading my problem and trying to help. I actually have a Windows 7 Home Premium 64-bits. So I've downloaded, extracted and installed Flash correctly. When I try to open the software, on the loading screen, the loading slows down on fonts and when building workspace a window appears and flash just freezes. I've tried running as an administrator, compatibility mode, yet nothing seems to work. When i checked out the folder, I found error logs. They are all the same, here's the content of one:
# A fatal error has been detected by the Java Runtime Environment:
# Internal Error (exceptions.cpp:364), pid=4672, tid=4664
# Error: ExceptionMark destructor expects no pending exceptions
# JRE version: 6.0_18-b07
# Java VM: Java HotSpot(TM) Client VM (16.0-b13 mixed mode windows-x86 )
# If you would like to submit a bug report, please visit:
#   http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x181af000): JavaThread "main" [_thread_in_vm, id=4664, stack(0x00090000,0x00190000)]
Stack: [0x00090000,0x00190000], sp=0x0018e90c, free space=3fa0018e91ck
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C 0x185c4000
C 0x18471cc8
C 0x1847c998
C 0x1844685f
C 0x184469e2
C 0x18446a5a
C 0x184460f0
C 0x18592395
C 0x18592acd
C 0x18592e85
C 0x18592ea6
C 0x184ef947
C 0x6d3317f8
j java.lang.ClassLoader.findBootstrapClass(Ljava/lang/String;)Ljava/lang/Class;+0
j java.lang.ClassLoader.findBootstrapClassOrNull(Ljava/lang/String;)Ljava/lang/Class;+12
j java.lang.ClassLoader.loadClass(Ljava/lang/String;Z)Ljava/lang/Class;+32
j java.lang.ClassLoader.loadClass(Ljava/lang/String;Z)Ljava/lang/Class;+23
j sun.misc.Launcher$AppClassLoader.loadClass(Ljava/lang/String;Z)Ljava/lang/Class;+41
j java.lang.ClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class;+3
v ~StubRoutines::call_stub
C 0x184c072c
C 0x1854fd51
C 0x184c08f7
C 0x184c09ea
C 0x185925a8
C 0x18592acd
C 0x18592e85
C 0x18592ecb
C 0x184e7663
C 0x184c90a5
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j java.lang.ClassLoader.findBootstrapClass(Ljava/lang/String;)Ljava/lang/Class;+0
j java.lang.ClassLoader.findBootstrapClassOrNull(Ljava/lang/String;)Ljava/lang/Class;+12
j java.lang.ClassLoader.loadClass(Ljava/lang/String;Z)Ljava/lang/Class;+32
j java.lang.ClassLoader.loadClass(Ljava/lang/String;Z)Ljava/lang/Class;+23
j sun.misc.Launcher$AppClassLoader.loadClass(Ljava/lang/String;Z)Ljava/lang/Class;+41
j java.lang.ClassLoader.loadClass(Ljava/lang/String;)Ljava/lang/Class;+3
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x26e08c00 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=1132, stack(0x27180000,0x27280000)]
0x1818fc00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=4636, stack(0x27040000,0x27140000)]
0x1818c800 JavaThread "Attach Listener" daemon [_thread_blocked, id=3864, stack(0x26d00000,0x26e00000)]
0x18189400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=4528, stack(0x26bc0000,0x26cc0000)]
0x18137400 JavaThread "Finalizer" daemon [_thread_blocked, id=2404, stack(0x26a80000,0x26b80000)]
0x18136000 JavaThread "Reference Handler" daemon [_thread_blocked, id=4568, stack(0x26940000,0x26a40000)]
=>0x181af000 JavaThread "main" [_thread_in_vm, id=4664, stack(0x00090000,0x00190000)]
Other Threads:
0x1812fc00 VMThread [stack: 0x26800000,0x26900000] [id=3948]
0x26e26400 WatcherThread [stack: 0x272c0000,0x273c0000] [id=3288]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation   total 4928K, used 192K [0x1a6f0000, 0x1ac40000, 0x1d190000)
eden space 4416K,   4% used [0x1a6f0000, 0x1a720370, 0x1ab40000)
from space 512K,   0% used [0x1ab40000, 0x1ab40000, 0x1abc0000)
to   space 512K,   0% used [0x1abc0000, 0x1abc0000, 0x1ac40000)
tenured generation   total 10944K, used 0K [0x1d190000, 0x1dc40000, 0x226f0000)
   the space 10944K,   0% used [0x1d190000, 0x1d190000, 0x1d190200, 0x1dc40000)
compacting perm gen total 12288K, used 1484K [0x226f0000, 0x232f0000, 0x266f0000)
   the space 12288K, 12% used [0x226f0000, 0x22863288, 0x22863400, 0x232f0000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x01d97000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\Flash.exe
0x77510000 - 0x77690000 C:\Windows\SysWOW64\ntdll.dll
0x76470000 - 0x76570000 C:\Windows\syswow64\kernel32.dll
0x762c0000 - 0x76306000 C:\Windows\syswow64\KERNELBASE.dll
0x6c7c0000 - 0x6c8a6000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\amtlib.dll
0x76570000 - 0x76670000 C:\Windows\syswow64\USER32.dll
0x75140000 - 0x751d0000 C:\Windows\syswow64\GDI32.dll
0x76880000 - 0x7688a000 C:\Windows\syswow64\LPK.dll
0x751d0000 - 0x7526d000 C:\Windows\syswow64\USP10.dll
0x76c80000 - 0x76d2c000 C:\Windows\syswow64\msvcrt.dll
0x760e0000 - 0x76180000 C:\Windows\syswow64\ADVAPI32.dll
0x76ae0000 - 0x76af9000 C:\Windows\SysWOW64\sechost.dll
0x76b90000 - 0x76c80000 C:\Windows\syswow64\RPCRT4.dll
0x75080000 - 0x750e0000 C:\Windows\syswow64\SspiCli.dll
0x75070000 - 0x7507c000 C:\Windows\syswow64\CRYPTBASE.dll
0x75340000 - 0x75f89000 C:\Windows\syswow64\SHELL32.dll
0x76680000 - 0x766d7000 C:\Windows\syswow64\SHLWAPI.dll
0x76020000 - 0x7609b000 C:\Windows\syswow64\COMDLG32.dll
0x71ed0000 - 0x7206e000 C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16385_no ne_421189da2b7fabfc\COMCTL32.dll
0x74dc0000 - 0x74dc9000 C:\Windows\system32\VERSION.dll
0x733c0000 - 0x733f2000 C:\Windows\system32\WINMM.dll
0x74b60000 - 0x74b79000 C:\Windows\system32\AVIFIL32.dll
0x76970000 - 0x76acc000 C:\Windows\syswow64\ole32.dll
0x72840000 - 0x72854000 C:\Windows\system32\MSACM32.dll
0x724a0000 - 0x724c1000 C:\Windows\system32\MSVFW32.dll
0x76ad0000 - 0x76ad5000 C:\Windows\syswow64\PSAPI.DLL
0x750e0000 - 0x75140000 C:\Windows\syswow64\IMM32.dll
0x75270000 - 0x7533c000 C:\Windows\syswow64\MSCTF.dll
0x76430000 - 0x76465000 C:\Windows\syswow64\WS2_32.dll
0x76670000 - 0x76676000 C:\Windows\syswow64\NSI.dll
0x10000000 - 0x10028000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\PFF.dll
0x73960000 - 0x73a03000 C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_508ed732bcbc 0e5a\MSVCR90.dll
0x12000000 - 0x121cb000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\xerces-c_2_6.dll
0x72ee0000 - 0x72f7b000 C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d08a205e442d b5b5\MSVCR80.dll
0x00250000 - 0x0025e000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\boost_threads.dll
0x00270000 - 0x0027f000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\boost_date_time.dll
0x738d0000 - 0x7395e000 C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_508ed732bcbc 0e5a\MSVCP90.dll
0x00290000 - 0x00297000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\boost_system.dll
0x32100000 - 0x321ca000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\Workspace.dll
0x745a0000 - 0x74730000 C:\Windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7600.16385_none_72fc7 cbf861225ca\gdiplus.dll
0x01da0000 - 0x01f00000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\dvacore.dll
0x76890000 - 0x7691f000 C:\Windows\syswow64\OLEAUT32.dll
0x022a0000 - 0x025f2000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\dvaui.dll
0x6c660000 - 0x6c7b4000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\AdobeOwl.dll
0x71080000 - 0x71421000 C:\Windows\WinSxS\x86_microsoft.vc90.mfc_1fc8b3b9a1e18e3b_9.0.30729.4148_none_4bf5400abf9d 60b7\mfc90u.dll
0x73400000 - 0x73405000 C:\Windows\system32\MSIMG32.dll
0x002f0000 - 0x00388000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\FlashIK.dll
0x02600000 - 0x028fa000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\dvaadameve.dll
0x003b0000 - 0x003c2000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\boost_signals.dll
0x003e0000 - 0x003f4000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\boost_filesystem.dll
0x01fe0000 - 0x02068000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\boost_regex.dll
0x01f20000 - 0x01f37000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\AlcidDLL.dll
0x02900000 - 0x03013000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\aflame.dll
0x03020000 - 0x0321a000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\aflamingo.dll
0x03220000 - 0x033c1000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\AdobeLinguistic.dll
0x715e0000 - 0x715fe000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\ahclient.dll
0x76330000 - 0x76424000 C:\Windows\syswow64\WININET.dll
0x760a0000 - 0x760a3000 C:\Windows\syswow64\Normaliz.dll
0x76180000 - 0x762b5000 C:\Windows\syswow64\urlmon.dll
0x76ff0000 - 0x7710c000 C:\Windows\syswow64\CRYPT32.dll
0x774e0000 - 0x774ec000 C:\Windows\syswow64\MSASN1.dll
0x76df0000 - 0x76fe9000 C:\Windows\syswow64\iertutil.dll
0x020a0000 - 0x020f6000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\LogSession.dll
0x766e0000 - 0x7687d000 C:\Windows\syswow64\SETUPAPI.dll
0x76d30000 - 0x76d57000 C:\Windows\syswow64\CFGMGR32.dll
0x76310000 - 0x76322000 C:\Windows\syswow64\DEVOBJ.dll
0x74b40000 - 0x74b49000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\adbeape.dll
0x73040000 - 0x7308b000 C:\Windows\system32\apphelp.dll
0x6c5d0000 - 0x6c65c000 C:\Windows\AppPatch\AcLayers.dll
0x737a0000 - 0x737b7000 C:\Windows\system32\USERENV.dll
0x73790000 - 0x7379b000 C:\Windows\system32\profapi.dll
0x72f80000 - 0x72fd1000 C:\Windows\system32\WINSPOOL.DRV
0x6c5b0000 - 0x6c5c2000 C:\Windows\system32\MPR.dll
0x6c390000 - 0x6c5a8000 C:\Windows\AppPatch\AcGenral.DLL
0x73410000 - 0x73490000 C:\Windows\system32\UxTheme.dll
0x747d0000 - 0x747df000 C:\Windows\system32\samcli.dll
0x731f0000 - 0x731f3000 C:\Windows\system32\sfc.dll
0x72690000 - 0x7269d000 C:\Windows\system32\sfc_os.DLL
0x72260000 - 0x72273000 C:\Windows\system32\dwmapi.dll
0x6c130000 - 0x6c389000 C:\Windows\AppPatch\AcXtrnal.DLL
0x71c10000 - 0x71c16000 C:\Windows\system32\SHUNIMPL.DLL
0x715d0000 - 0x715dd000 C:\Windows\system32\SortServer2003Compat.dll
0x73250000 - 0x7325f000 C:\Windows\WinSxS\x86_microsoft.vc90.mfcloc_1fc8b3b9a1e18e3b_9.0.30729.4148_none_4973eb1d7 54a9dc9\MFC90FRA.DLL
0x6c010000 - 0x6c124000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\amtservices.dll
0x74de0000 - 0x74dfc000 C:\Windows\system32\IPHLPAPI.DLL
0x74dd0000 - 0x74dd7000 C:\Windows\system32\WINNSI.DLL
0x736c0000 - 0x73718000 C:\Windows\system32\WINHTTP.dll
0x73670000 - 0x736bf000 C:\Windows\system32\webio.dll
0x6bfa0000 - 0x6c00a000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\adobe_caps.dll
0x76b00000 - 0x76b83000 C:\Windows\syswow64\CLBCatQ.DLL
0x73090000 - 0x73185000 C:\Windows\system32\propsys.dll
0x73760000 - 0x73781000 C:\Windows\system32\ntmarta.dll
0x76920000 - 0x76965000 C:\Windows\syswow64\WLDAP32.dll
0x05820000 - 0x05840000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\asneu.dll
0x06b20000 - 0x08069000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\fr_FR\Configuration\FlashResources.dll
0x73490000 - 0x734cc000 C:\Windows\system32\OLEACC.dll
0x06180000 - 0x06210000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\AdobePIP.dll
0x749c0000 - 0x74aa7000 C:\Windows\system32\ddraw.dll
0x74d30000 - 0x74d36000 C:\Windows\system32\DCIMAN32.dll
0x72290000 - 0x72453000 C:\Windows\system32\D3D9.DLL
0x72280000 - 0x72286000 C:\Windows\system32\d3d8thk.dll
0x6b0e0000 - 0x6b685000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\Common\Configuration\authplay.dll
0x74520000 - 0x74592000 C:\Windows\system32\DSOUND.dll
0x74880000 - 0x748a5000 C:\Windows\system32\POWRPROF.dll
0x71600000 - 0x71679000 C:\Windows\system32\mscms.dll
0x6d980000 - 0x6da6b000 C:\Windows\system32\dbghelp.dll
0x731c0000 - 0x731ee000 C:\Windows\system32\mlang.dll
0x74bf0000 - 0x74ceb000 C:\Windows\system32\WindowsCodecs.dll
0x72070000 - 0x721a2000 C:\Windows\System32\msxml3.dll
0x729d0000 - 0x72a09000 C:\Windows\system32\MMDevAPI.DLL
0x72ae0000 - 0x72ae8000 C:\Windows\system32\serwvdrv.dll
0x72ad0000 - 0x72ad8000 C:\Windows\system32\umdmxfrm.dll
0x729a0000 - 0x729d0000 C:\Windows\system32\wdmaud.drv
0x72990000 - 0x72994000 C:\Windows\system32\ksuser.dll
0x72980000 - 0x72987000 C:\Windows\system32\AVRT.dll
0x72860000 - 0x72868000 C:\Windows\system32\msacm32.drv
0x72830000 - 0x72837000 C:\Windows\system32\midimap.dll
0x6bf70000 - 0x6bf8b000 C:\Program Files (x86)\Common Files\Adobe\APE\3.1\adbeapecore.dll
0x74850000 - 0x7487e000 C:\Windows\System32\shdocvw.dll
0x71c20000 - 0x71c8f000 C:\Windows\system32\ntshrui.dll
0x735e0000 - 0x735f9000 C:\Windows\system32\srvcli.dll
0x74800000 - 0x7480b000 C:\Windows\system32\cscapi.dll
0x747f0000 - 0x747fa000 C:\Windows\system32\slc.dll
0x74d70000 - 0x74d86000 C:\Windows\system32\CRYPTSP.dll
0x73830000 - 0x7386b000 C:\Windows\system32\rsaenh.dll
0x733b0000 - 0x733be000 C:\Windows\system32\RpcRtRemote.dll
0x6bf20000 - 0x6bf69000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\BIB.dll
0x6bee0000 - 0x6bf20000 C:\Program Files (x86)\Adobe\Adobe Flash CS5\BIBUtils.dll
VM Arguments:
jvm_args: -Djava.library.path=C:\ProgramData\Adobe\CS5\jre\bin -Djava.Home=C:\ProgramData\Adobe\CS5\jre -Xbootclasspath/a:;C:\Program Files (x86)\Java\jre6\bin\javaw.exe -Djava.awt.headless=true -Xmx128m
java_command: <unknown>
Launcher Type: generic
Environment Variables:
JAVA_HOME=C:\ProgramData\Adobe\CS5\jre
CLASSPATH=C:\Program Files (x86)\Java\jre6\bin\javaw.exe
PATH=C:\ProgramData\Adobe\CS5\jre\bin;C:\Program Files (x86)\Macromedia\Flash 8\;C:\Program Files (x86)\PC Connectivity Solution\;c:\devkitPro\msys\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C :\Program Files (x86)\CyberLink\Power2Go\;C:\Program Files (x86)\Autodesk\Backburner\;C:\Program Files (x86)\Common Files\Autodesk Shared\;C:\Program Files (x86)\Common Files\DivX Shared\;C:\Program Files (x86)\Common Files\Autodesk Shared\AdLM\R1;C:\PROGRA~2\PICC;C:\PROGRA~1\TIEDUC~1\TI-83P~1\UTILS;C:\Program Files (x86)\Microchip\MPLAB C32 Suite\bin;C:\Program Files (x86)\Microchip\MPLAB IDE\VDI;C:\Program Files (x86)\HI-TECH Software\PICC\9.70\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows \System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Csound\bin;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\TortoiseSVN\bin;C:\Program Files (x86)\Universal Extractor;C:\Program Files (x86)\Universal Extractor\bin;c:\devkitPro\devkitARM\arm-eabi\bin;C:\devkitpro\devkitARM\bin;c:\devkitpro \msys\bin;c:\devkitpro\devkitarm;C:\devkitPro\devkitARM\libexec\gcc\arm-eabi\4.1.1;C:\Prog ram Files (x86)\Cracklock\Bin;C:\Program Files (x86)\OpenVPN\bin;C:\Users\Malekbr\AppData\Local\Start++\LNKs;C:\Users\Malekbr\AppData\Lo cal\Start++\CMDs
USERNAME=Malekbr
OS=Windows_NT
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 6, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 23 stepping 6, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1
Memory: 4k page, physical 4192696k(2476844k free), swap 10479180k(8629468k free)
vm_info: Java HotSpot(TM) Client VM (16.0-b13) for windows-x86 JRE (1.6.0_18-b07), built on Dec 17 2009 13:35:55 by "java_re" with MS VC++ 7.1 (VS2003)
time: Tue May 11 18:03:33 2010
elapsed time: 1 seconds
(I think these are from compatibility mode).
I hope the informations I gave will help figure out the problem, and thank you .

Hi,
In case some people are still trying to find a solution to this problem.
In order to solve this I had to do the following:
Assuming you installed the latest Java Runtime, in my case Java 1.6, you will need to uninstall it from your machine, delete the bin and lib folders from C:\ProgramData\Adobe\CS5\jre.
The next step google for ‘Java Runtime Environment 5.0 Update 22′.Install it and then copy the bin and lib folders back to C:\ProgramData\Adobe\CS5\jre. After that you can go and install Java runtime 1.6 back. It’s works with no errors now. The issue seems to be that Java 1.6 does not play nicely with Flash CS5 and CS5.5. This link helped me find the solution.
Chris

Windows 7 64-bit problems

Hi all. I'm aware that this is a fairly prominent problem and, reading around, I have seen that some people have been able to resolve this particular issue. I am having problems however, and cannot aptly describe the sheer frustration I am feeling. Recently upgrading to Windows 7 64-bit, I installed iTunes only to find that it had clearly installed a 32-bit version. Whenever starting the application I was confronted with a message that said I would be unable to burn cds unless I correctly reinstalled iTunes. This morning, then, I decided to download the most recent 64-bit version of iTunes. Upon finishing installation I was greeted by the notification "The folder iTunes is on a locked disk or you do not have write permissions to this folder." Delving into the same issue posted by the myriad people that have encountered this problem, I have seen that it is a permissions problem for Windows. However, I have been wholly unable to resolve it. Is there any way I can get help with this I would be incredibly thankful. Cheers.

itunes for windows is a 32-bit program, no matter which OS it is installed on. Only the drivers are different for 64-bit OS. What you're seeing is normal there.
+I have seen that it is a permissions problem for Windows.+
In Win Explorer, right-click on the itunes folder, Get Properties > Security tab.
Make sure your username has full control and ownership, and apply to all child/subfolders.
If still no joy, temporarily turn off UAC and see if itunes will launch.

Oracle 11g R2 to MS Access .mdb (Windows Server 2008 64-bit) problem

I have a need to make connection from Oracle 11g R2 to MS Access database file (mdb). OS is MS Windows Server 2008 64-bit. My configuration is next:
1. I made System DNS mikeacs (using c:\windows\sys_wow6\odbcad32.exe) to my access mdb file;
2. I made initmikeacs.ora file in ora_home\hs\admin folder:
# HS init parameters
HS_FDS_CONNECT_INFO = mikeacs
HS_FDS_TRACE_LEVEL = debug
HS_FDS_SHAREABLE_NAME = c:\Windows
3. Listener.ora file is:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\Oracle\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\Oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(SID_NAME = mikeacs)
(ORACLE_HOME = c:\oracle\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = cspo02)(PORT = 1521))
4. Tnsnames.ora is:
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
MIKEACS =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521))
(CONNECT_DATA=(SID=mikeacs))
(HS=OK)
5. After this, I restarted Listener:
lsnrctl stop;
lsnrctl start;
Given feedback:
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 20-RUJ-2010 14:47:21
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File c:\oracle\diag\tnslsnr\cspo02\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "mikeacs" has 1 instance(s).
Instance "mikeacs", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
6. I created db link: create public database link macs using 'MIKEACS' (connected as sysdba);
7. tnsping mikeacs:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521)) (CONNECT_DATA=(SID=mikeacs)) (HS=OK))
OK (0 msec)
Then, when I try fire query (connected as sysdba): select * from mytable@macs;
get result:
ERROR at line 1:
ORA-28513: internal error in geterogeneous remote agent
ORA-02063: preceding line from MACS;
Although, when I fire the same query, but connected as other user, get next result:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Driver Manager] Data source name not found and no default
driver specified {IM002}
ORA-02063: preceding 2 lines from MACS
Where is my problem? Please help. Thanks in advance!

That's the problem. DG4ODBC on 64bit Windows is 64bit and thus it also requires a 64bit ODBC driver.
If you don't find one - maybe you can install DG4ODBC 32bi on a 32bit platform (please do NOT install it on the 64bit Windows machine) and then use this 32biit DG4ODBC with the 32bit ODBC driver.
Another option would be to purchase a commercial ODBC driver or a bridged ODBC driver.

Saound blaster audigy value windows vista 32 bit problem in driver compatibility!!!

i have installed the sb audigy value latest drivers july 9 2007?and it installed clean and then after a few restart it will detect again the standard?pci to pci bridge and sound devices... when i am using?xp this does not happenwhat is wrong with your drivers? i am installing the?drivers?again and again and same thing happen and my settings reverting always to 6 bit 48khz my card is 24 bit 96khz in the first install... and after a few restart?the setting for 24 bit and 96khz?will dissapear and the only available is 6 bit 48khz somtimes not working? kindly help me... plz... all my problem in windows vista 32 bit has been resolve this is the only one remaining...

Graphic drivers for the iMac is a regular question, and there are some tips and answers. I'd have skipped Vista, too much like beta and gone for 7, but you have it now....
Check the end of this thread with tips:
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0&messageID=112 87449#11287449
And take a look for other similar threads.

Flash Player in Windows 8.1 64 bit problems .....

Hi. I have just installed Windows 8.1, but have problems with the embedded Flash Player in Internet Explorer.
Starting Internet Explorer from the Desktop causes no problems. In particular (in case this has any bearing), going to BBC.co.uk, Sport,Formula 1, and playing videos there uses Flash Player with no problem.
Starting Internet Explorer from the Start screen (the Graphical one!) opens BBC.co.uk fine, through Sport to Formula 1 - OK. Even before I try to play any of the videos, attached to each video is a message telling me that I have the wrong vesrion of Flash Player, and invites me to download the correct one. Trying this brings an error message saying that Flash Player is an integrated part of I.E., and will not allow me to download. Attempting to "update to the latest version for Win 8.1" gives me the same message. The reported version I have is 12.0.0.77, the O.S. is Windows 8.1 (64 bit), but the Browser reported is NONE. I have checked that Flash Player is enabled, and visited Manage ..... I cannot find a problem. Can someone cast any light?

Using the non-desktop version of IE11 is where we see this most often. The problem can be summed up in three words:
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess thay've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in. I've read elsewhere that Opera in "Turbo Mode" is the best for viewing ANYTHING at bbc.co.uk. "Turbo Mode" enables proxy viewing, which apparently helps with the bbc site.

Sticky Bit - Problem...

Hello,
I have one thing to ask, to clarify... Some weeks ago after a system migration from win/sql to linux/oracle (and after an oracle upgrade from 10.2.0.4 to 11.2.0.1), we faced an error during DB13, the job Scheduled Update Statistics finished with an error! After some research, we found the solution... the reason was the version of oracle instant client that was the version 10.2.0.2 (the first version of this OIC)!
So after I performed the update of oracle instant client (OIC) to version 10.2.0.4 (V3) the error finally disappeared... and it was the solution, which in that moment I thought it had been responsible for this correction!... but now I'm not so sure! Why?! Because the same problem appear again on another system, I performed the same solution, I updated the oracle instant client to version 10.2.0.4 v3 but unfortunately the problem still continue appear! So what I concluded, was that is not the solution, I realized this is not only because of the old OIC version that is installed in our system... there is other problem which is related to permissions!
Later I discovered that the STICKY BIT (?) had been applied before I have upgraded the oracle instant client... and in fact in this new system, after the solution of oracle client update the error still continued appear and in fact only after the application of sticky bit in this system the error definitely no longer appear!
So my question is what is this?... what is Sticky Bit?
I looked in SAP Marketplace if there were any related sapnotes to sticky bit but I didn´t found anything... this is some mandatory procedure?... if so, sap recommends the application of this where? in which situations?
I don´t know exactly what is STICKY bit and what he do... but the truth is that from the moment I applied it, with command ./saproot.sh (with root) on /sapmnt/SID/exe, we resolve the other part of this problem... I tried to search sapnotes in SAP marketplace about this sticky bit but I didn´t find anything... Can you explain me better if sap advice to apply this sticky bit... and if it can origin any problem or if there are any conflict with other things when we applied it on system!??
Kind regards,
Joao Dimas - Portugal

Now I think I understand the meaning and what is its functionality... but explain me another thing, the application of sticky bit with ./saproot.sh <SAPSID> changed other four files: brarchive; brbackup; brconnect and icmbnd (this five files now have a red colour)...
Yes, and they have an "s" instead of an "x" if you use ls -l.
The same thing is true for those files. The br*tools must be run as the user running/owning the database software (oraadm during startsap.
So, if this is so important to run (because if I didn´t ran this command the job throught DB13 can not runs) why there isn´t sap notes or sap documentation, discussing this issue and the need to apply the sticky bit to fix this problem?
It's documented - but hidden:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/3753c4b87b6025e10000000a422035/frameset.htm
Markus

Win8 & cs 6 64 bit problem

Similar Messages

Maybe you are looking for