Win8/T500 headphone jack stopped working. Conextant Audio Software issue?

I have a T500 - 2081CTO, and in the last week or less, the headphone jack has stopped working. There was a windows update recently so I'm assuming that's the culprit. I typically let it do it's auto-update thing without paying much attention, so I don't know what exactly changed or why it would kill the headphone jack. I've tried looking for Conextant drivers, but those don't seem to have changed since 2011. Win8 and the T500 has always been a bit flaky, but this at least has always worked. How can I test that it's the software and not a hardware issue? And if it is software related, what do I need to fix it?

I now think that it's possible there wasn't a "problem" so much as an inconvenience. While at home, I incrementally re-installed everything that I still wanted and saw no problems with the headphone jack. However, once I returned to work and connected the laptop to my dock with USB speakers, the USB always take precedence. Previously, the computer would recognize that headphones were plugged in and switch from USB to internal (ie. headphone jack) as default, and switch back to USB when the headphones were removed, always skipping the on-board speakers. That ability now seems to be missing and I need to manually set the internal speakers as default whenever I plug in headphones and manually back to USB when they're removed. Is there any way to get this functionality back? I loved how it "just worked" before. Now it's "just broken".

Similar Messages

  • My headphone jack stopped working.

    I have a iMac with a Intel Core 2 Duo. A year ago my headphone jack stopped working. When I plug in my headphones The internal speakers keep playing. Nothing shows up in system preferences > sound when i have them plugged in.
    Thanks

    This exact same thing is happening to me too...anyone have any fixes?

  • HT201896 headphone jack stopped working

    headphone jack stopped working, what can I do?

    Try a SMC reset - Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • T540p headphone jack stopped working

    I have a T540p, a little over a month old. Sometime in the last week (not sure of the exact date) the headphone jack in my machine abruptly stopped working. I've tried multiple sets of (known to be working) headphones in the jack, and they're definitely recognized when I plug them in (they pop up as "plugged in" in the list of playback devices in windows sound manager). The regular speakers work fine, but no sound comes out of headphones.
    I am pretty certain that this is NOT a driver/software issue. I haven't tried messing with drivers yet, but I dual-boot Windows 7 and Linux Mint, and the problem is identical on either operating system, so I have my doubts that the drivers on both systems failed simultaneously. Any suggestions? Thanks.

    Hi Mo,
    Since the issue exists in different operating systems, the chances of driver failure are minimal. It sounds like a mechanical issue with your audio jack. I would strongly recommend you to contact our technical support for assistance.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Best Regards,
    Mithun.

  • Imac headphone jack stopped working!?

    i have a 2.4GHz intel imac that is only about 6 months old and i had a headphone extender plugged into the headphone jack outlet on the back that i never touched. i unplugged it yesterday and re-plugged it in today and now the sound is not going through the headphone jack at all. i've tried using different sets of headphones without the extender, i've unplugged and plugged all cords, re-booted, etc. to no avail. i'm really frustrated as this computer is basically brand new! and i'm guessing to replace the jack is going to be a big job. has anyone else experienced this or know of a way to fix? i haven't run any disc utility programs...

    I just bought a brand new 24" iMac and the jack worked out of the box for about 1 week. Then yesterday it stopped working. I did some research in these discussion threads and found one about using a secondary cable between the external speakers and the imac. So, I plugged in my Monster cable splitter for sharing your headphone jack with a friend. The connection was more secure than when the speakers alone were plugged directly in. The Monster cable had not static or wiggle. Everything seems to be working again. So it appears to be a defect in the headphone jack tolerance in the iMac. I've tested the external speakers in 2 different ipods and it works fine with both of them.
    It ***** to have your new computer not work well out of the box, so if you truly want a mint machine, contact Applecare and see about replacement. Or you can try this easy fix. We'll see how long it holds up!
    Good Luck!
    Paul

  • HT2494 iMac headphone jack stopped working

    Hi folks
    The headphones are not working any more on my iMac and nothing has apparently changed. They were working yesterday.
    Have tested several other sets of phones and an external speaker system too - no go.
    The headphone output choice suddenly does not appear anymore in Preferences/Sound/Output, even though the headphones are plugged in all the way to the hilt. Only the 'Internal Speakers" appear in the window as an output option.
    I have also changed and inter-changed all the setting choices on the Applications/Utilities/Audio Midi Setup/Output/Internal Speakers function.
    In addition, all the mute settings are unchecked.
    I have shut down restarted and slept the Mac. Still nothing.
    My operating system is OS X Mavericks. No upgrades of any kind have a link to the problem as I have not carried out any.
    So - I'm stumped.
    Does anyone have any ideas, please?

    Hello Befuggled,
    It may help to reset your computer's NVRAM and SMC.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    About NVRAM and PRAM
    http://support.apple.com/kb/HT1379
    Cheers,
    Allen

  • Pavillion dv6000 headphone jack stop working

    I have a HP dv6000, there's no sound coming out from the headphone when i put it in, but comes out from the speaker. So there's sound from the speaker but not on the headphones even if its plugged in. Please help!!!!

    I found that if playing back video or audio to close the application switch to headphones then relaunch the application to hear through the headphone jack. It's the same way back to the normal speakers. I wish that HP or MS would own up to the root cause.
    - Hope that might help someone else out!
    Message Edited by CSII on 01-21-2009 09:53 PM

  • USB Stops Working, Hardware or Software Issue?

    I am having a strange problem with my laptop. It's a Dell Latitude E6410. I noticed this problem for the first time yesterday.
    Whenever I'm home, I plug in a USB keyboard, USB mouse, and sometimes my PSP to charge or add files. All of this normally works. Yesterday, I was deleting everything from my PSP hard drive, and in the middle of doing so it just disconnected. I noticed that my USB keyboard and mouse stopped working too, my mouse didn't even have the laser lighting up on the bottom. I restarted and everything was fine.
    Last night I put my computer on standby, and just now I woke it back up. Upon doing so, none of my USB devices were functioning again, and I had to restart my laptop and that did fix it.
    My confusion is whether this could be a software issue or hardware issue. I've never had an issue like this before. I notice that my mouse doesn't start working and my PSP doesn't start charging until after Arch starts to boot, so I wonder if there is a daemon that might be dying or something?
    My laptop is under warranty so if it's a hardware issue I'm covered, though if I call Dell tech support I'll have to put my Windows hard drive in it (which I keep just in case I have to call tech support) but I thought I'd ask here before I go through all that.

    lilsirecho wrote:
    Perhaps it is a software issue since it occurs after putting the laptop in standby.
    Some BIOS programs have a legacy USB entry.  Perhaps that needs attention for whatever reason.
    If on internal power, low battery charge could introduce discrepant behavior.  This is not likely if on wallwart power.
    Review recent upgrades for clues to the solution.
    It doesn't happen only after standby. The second time it did, but the first time it happened right in the middle of transferring files from my PSP.

  • Audio from headphone jack stops working.

    Hello.
    When I play back audio on my MacBook pro in Traktor Pro, iTunes or even VLC it comes out my internal speakers like normal. If I plug my headphones in it will start coming out my headphones like it should and if I unplug them it comes back out my speakers again and it all seems to be ok. However if I close the lid and let the computer sleep, when I wake it up it will play audio out the speakers but if I plug my headphones in again they won't work and the sound will continue to come out of my internal speakers (while headphones are still plugged in). If I go into my audio settings it just says internal speakers and when I plug my headphones in it goes away and then the computer says it has no Audio device installed, if I goto adjust my volume with the key on the keyboard I get the speaker with the circle with the slash thought it if as to say volume cannot be done. The only way for me to get sound back from my headphones is to restart the computer. I don't know why it is doing it and have no idea what would be causing this. Is anyone able to help me out with this.? It's so frustrating having to restart my machine all the time as I am a DJ and run my DJ software and deck controllers from it. I have a mid 2011 17" MBP running Lion osx 10.7.2 (all software up to date as of 05-01-12) 8GB Ram.
    Cheers :)

    I have a mid 2011 17"
    You are still under warranty.  Call Apple Care.  
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.  
    Solution may be found if you search in the "More Like This" section over in the right column.

  • Speakers and Headphone Jack stopped working

    I own an HP Envy 17 3D (1195ea). Its running Win7 64 Pro.
    Yesterday the laptop was working perfectly fine. I didnt move it and it stayed on the same desk. When I shut it down last night (12th Sept) it was working with both the speakers and headphones. This morning I turned it on and it applied some windows updates. I then tried to play some MP3s and there was no sound coming out of either the speakers or headphones.
    I have done a system restore to the 31st Aug to see if that solves the issue without any luck. I have also downloaded the latest drivers for the Audio and both uninstalled the old ones and then installed the latest with no fix.
    As far as windows is concerned the sound card is working as advertised. The audio is playing according to VLC, Winamp and WMP and there are no problems with the hardware in the Device Manager. I have also used the windows troubleshooter in control panel and that comes back with no problems.
    If I run the beats software and plug in my headphones it detects the headphones so the socket is working correctly. Just with no sound. Equally when I unplug them it switches back to speaker mode.
    Audio is still working over HDMI on my TV as well.
    I am by no means a noob with computers and have built a number from scratch but I am literally stumped by this.
    Any ideas?

    iMac PowerPCs being over 8 years old are due for a new PRAM battery every 4 or so years.  This may affect your output settings.   If your PRAM battery is less than 4 years old, then you may need to modify the Audio Midi Setup application, or rest the PRAM.  PowerPC Macs stopped being sold new in 2006.
    If your Mac is newer, you posted in the wrong forum.  If it is the same year, go to Apple menu -> About This to find if it is PPC (PowerPC, PowerMac), or Intel.

  • IMac headphone jack stopped working (Part 2)

    Following my earlier post 2 days ago, even though it seems I'm just talking to myself, - just in case anyone is interested out there:
    I'm attributing this fault to a software error. The 'headphone' option re-appears from time to time for selection from the System Preferences/Sound/Output window.
    One selected it works for an indeterminate time before reverting back to 'Internal Speakers".
    It is SOOOOOOO frustrating .
    If any Apple tech guys browse these listings at all - could you PLEASE fix this obvious bug. My Op software is OS X 10.9.4. on a Mac 21.5 inch late 2012 model.
    Thank you in hope.......................................

    Thanks OT
    I tried booting into the Recovery volume selecting Disk Utility and repairing both disk permissions and the disk. Still no change.
    I don't have the nerve to reinstall the system, just in case I screw up something else!
    Thanks for your reply. It's appreciated.
    Befuggled

  • K1 Where do we get email for warranty support K1 headphone jack stopped working.

    Support site has no clear spot for hardware rma support!
    Solved!
    Go to Solution.

    Hi,
    To me anyway that method seems rather old fashioned, a few day's after I purchased my IdeaTab A2109A, I was online @ their website getting information about purchasing an extended warranty. After entering the required information
    ( Serial # ), I was shown on their site that my A2109 didn't even have the full year like it's supposed to. That's when I called the toll-free support phone #. The person I spoke with was very cordial, he gathered my pertinent information, he asked me to provide a copy of my receipt, he asked for my e-mail address, which I provided, he told me he would send me a message that would contain a e-mail address to send a copy of my receipt to, which he did. I scanned my receipt and saved a copy on my laptop computer. I saved the copy in the PDF format, because I thought that would be a accepted format. So far anyway, I haven't received ANY kind of response from the company whatsoever. I really wish they provided a support e-mail address for a situation like this.By the way I performed the same procedure as far as entering my serial # @the site where you can purchase an extended warranty. The information is STILL the same as it was previously, it shows that my A2109A doesn't have a full year of warranty, only 264 day's. Now I don't know what to do, to me anyway.... being a new customer, that qualifies as poor customer service.
    David

  • Mac Book Pro Headphone jack isnt working?

    Out of nowhere my headphone jack stopped working, i can only hear out of one ear. is there a way i can fix it or get it fixed for me?

    How old is your MacBook Pro, and do you have Applecare?  You might still be under warranty.
    Otherwise, have you tested your headphones out on another device and tried a different headset on your Mac?  Is the channel completely dead, or can you apply slight pressure to the plug to get the channels to work?
    Maybe answers to these questions will give clues to others here to help.

  • 80G Headphone Jack not working

    My 80G iPod headphone jack stopped working.  I did the 5 R's.  Didn't fix it.  Transferred jack out of my old (dead) iPod to my 80G.  Nothing again.  Could have been a bad part though.  Can I buy this part on here?  Or is there anything else I can try?  Thanks a lot.

    Since you seem to know how to take them apart (and have the proper tools), maybe you can buy a broken iPod (of the same type) on eBay for the spare part.  Most iPods with a hard drive that are broken are broken because of a bad hard drive.  So your chances are good that the assembly with the headphone jack will be working.
    And you'll have some other spare parts, such as screen, click wheel, dock connector...
    If that broken iPod is broken because of a bad hard drive, but it is otherwise in better shape than your iPod, you can transplant your working hard drive into that iPod.

  • Headphone output stopped working (snd-hda, Dell XPS 13)

    Update: I got it working! See my second post; I will leave this here as a reference for those with the same problem.
    My headphone output stopped working, and my integrated microphone also stopped working. The speakers work fine, though.
    AFAIK, I didn't do anything, and am quite baffled as to why this is. It's worked fine for half a year.
    I have a Dell XPS 13; it came installed with Ubuntu, I booted that, where it *does* work (just to eliminate hardware problems).
    I'm running 3.16.4-1; I also downgraded to 3.16.3, which didn't help.
    I'm testing with speaker-test and mplayer -ao alsa; I normally use PulseAudio, but eliminating that for testing seemed like a sane thing to do. It doesn't work either way.
    I also downloaded the hda_analyzer, that has a lot of options, but I'm not sure what most of them mean...
    The closest I've been able to get at the problem is this:
    [~]% alsactl monitor
    card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
    card 0, #17 (0,0,0,Headphone Mic Jack,0) VALUE
    This is an insert & remove of my headphone jack; ALSA does detect something it seems. It's listed as "Headphone Mic Jack", is this right?
    Any hints would be greatly appreciated!
    More info:
    [~]% cat /etc/modprobe.d/alsa-base.conf
    options snd-hda-intel enable=0,1
    options snd-hda-intel model=dell-headset-multi,dell-headset-multi
    This is required to get this to work in the first place, and always has worked; I tried some other options, to no avail. the enable=0,1 is to disable the HDMI output (disabling this has no effect either).
    $ cat /sys/module/snd_hda_intel/parameters/model
    dell-headset-multi,dell-headset-multi,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null), +(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    To verify these options are actually being used
    $ id -Gn
    martin wheel video audio vboxusers nfs
    I'm in the audio group, not sure if this is required, but can't hurt.
    [~]# cat /etc/asound.conf
    # Use PulseAudio by default
    pcm.!default {
    type pulse
    fallback "sysdefault"
    hint {
    show on
    description "Default ALSA Output (currently PulseAudio Sound Server)"
    ctl.!default {
    type pulse
    fallback "sysdefault"
    # vim:set ft=alsaconf:
    Nothing special ... pulseaudio is more or less mandatory these days. ~/.asoundrc doesn't exist.
    Some misc. info:
    $ grep Codec /proc/asound/card*/codec*
    Codec: Realtek ALC3661
    [~]% lsmod | grep ^snd
    snd_usb_audio 135316 0
    snd_usbmidi_lib 27484 1 snd_usb_audio
    snd_rawmidi 26806 1 snd_usbmidi_lib
    snd_seq_device 13132 1 snd_rawmidi
    snd_hda_codec_realtek 67127 1
    snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
    snd_hda_intel 26327 3
    snd_hda_controller 26727 1 snd_hda_intel
    snd_hda_codec 108552 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 17244 2 snd_usb_audio,snd_hda_codec
    snd_pcm 88487 4 snd_usb_audio,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 73436 17 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
    $ lspci -vv
    00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
    Subsystem: Dell Device 060a
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at f0510000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel modules: snd_hda_intel
    00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
    Subsystem: Dell Device 060a
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 59
    Region 0: Memory at f0514000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    $ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.4-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c2879fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000c287a000-0x00000000dceeefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dceef000-0x00000000dcf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000df9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Dell Inc. XPS13 9333/0GFTRT, BIOS A02 12/11/2013
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 1 base 00DE000000 mask 7FFE000000 uncachable
    [ 0.000000] 2 base 00DD000000 mask 7FFF000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xc287a max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21f400000-0x21f5fffff]
    [ 0.000000] [mem 0x21f400000-0x21f5fffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21f3fffff]
    [ 0.000000] [mem 0x21c000000-0x21f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
    [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xc2879fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
    [ 0.000000] [mem 0xc0000000-0xc27fffff] page 2M
    [ 0.000000] [mem 0xc2800000-0xc2879fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x3796a000-0x37cacfff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 0x00000000DCFFE170 0000BC (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FACP 0x00000000DCFFB000 00010C (v05 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: DSDT 0x00000000DCFE6000 010557 (v02 DELL HSW-LPT 00000000 INTL 20120711)
    [ 0.000000] ACPI: FACS 0x00000000DCF9C000 000040
    [ 0.000000] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: HPET 0x00000000DCFFA000 000038 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: LPIT 0x00000000DCFF9000 000094 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: APIC 0x00000000DCFF8000 000098 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: MCFG 0x00000000DCFF7000 00003C (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE5000 000228 (v01 DELL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE2000 002028 (v01 DELL PtidDevc 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE1000 000539 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFE0000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000DCFDC000 003641 (v01 DELL SaSsdt 00003000 INTL 20120711)
    [ 0.000000] ACPI: UEFI 0x00000000DCFDB000 000042 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: POAT 0x00000000DCF77000 000055 (v03 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: BATB 0x00000000DCFDA000 000046 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FPDT 0x00000000DCFD9000 000064 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SLIC 0x00000000DCFD8000 000176 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: UEFI 0x00000000DCFD7000 0002A6 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 0x00000000DCFD6000 0005C1 (v01 DELL IsctTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: CSRT 0x00000000DCFD4000 0000C4 (v01 DELL QA09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
    [ 0.000000] NODE_DATA [mem 0x21f5f9000-0x21f5fdfff]
    [ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217200000-ffff88021ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x21f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xc2879fff]
    [ 0.000000] node 0: [mem 0x100000000-0x21f5fffff]
    [ 0.000000] On node 0 totalpages: 1973782
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12386 pages used for memmap
    [ 0.000000] DMA32 zone: 792698 pages, LIFO batch:31
    [ 0.000000] Normal zone: 18392 pages used for memmap
    [ 0.000000] Normal zone: 1177088 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 56
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xc287a000-0xdceeefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdceef000-0xdcf9efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdcfff000-0xdf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
    [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021f200000 s86784 r8192 d23808 u262144
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1942919
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7259ebb8-c940-4659-a99c-66226a58659c rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7688084K/7895128K available (5336K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 207044K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 31981568 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2394.295 MHz processor
    [ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.11 BogoMIPS (lpj=7980983)
    [ 0.000042] pid_max: default: 32768 minimum: 301
    [ 0.000050] ACPI: Core revision 20140424
    [ 0.020000] ACPI: All ACPI Tables successfully acquired
    [ 0.020260] Security Framework initialized
    [ 0.020267] Yama: becoming mindful.
    [ 0.020937] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.022978] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.023836] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.023849] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.024116] Initializing cgroup subsys memory
    [ 0.024140] Initializing cgroup subsys devices
    [ 0.024147] Initializing cgroup subsys freezer
    [ 0.024150] Initializing cgroup subsys net_cls
    [ 0.024155] Initializing cgroup subsys blkio
    [ 0.024183] CPU: Physical Processor ID: 0
    [ 0.024184] CPU: Processor Core ID: 0
    [ 0.024189] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.025376] mce: CPU supports 7 MCE banks
    [ 0.025391] CPU0: Thermal monitoring enabled (TM1)
    [ 0.025404] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    tlb_flushall_shift: 6
    [ 0.025524] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.026475] ftrace: allocating 20445 entries in 80 pages
    [ 0.038058] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.071090] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
    [ 0.071098] TSC deadline timer enabled
    [ 0.071124] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.071149] ... version: 3
    [ 0.071150] ... bit width: 48
    [ 0.071151] ... generic registers: 4
    [ 0.071152] ... value mask: 0000ffffffffffff
    [ 0.071154] ... max period: 0000ffffffffffff
    [ 0.071155] ... fixed-purpose events: 3
    [ 0.071156] ... event mask: 000000070000000f
    [ 0.097907] x86: Booting SMP configuration:
    [ 0.097909] .... node #0, CPUs: #1
    [ 0.112630] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.119293] #2 #3
    [ 0.154938] x86: Booted up 1 node, 4 CPUs
    [ 0.154942] smpboot: Total of 4 processors activated (19162.45 BogoMIPS)
    [ 0.160676] devtmpfs: initialized
    [ 0.163608] PM: Registering ACPI NVS region [mem 0xdceef000-0xdcf9efff] (720896 bytes)
    [ 0.164642] pinctrl core: initialized pinctrl subsystem
    [ 0.164688] RTC time: 22:42:27, date: 10/21/14
    [ 0.164750] NET: Registered protocol family 16
    [ 0.164884] cpuidle: using governor ladder
    [ 0.164887] cpuidle: using governor menu
    [ 0.164916] ACPI: bus type PCI registered
    [ 0.164918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.165012] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.165014] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.165118] PCI: Using configuration type 1 for base access
    [ 0.165125] dmi type 0xB1 record - unknown flag
    [ 0.177572] ACPI: Added _OSI(Module Device)
    [ 0.177575] ACPI: Added _OSI(Processor Device)
    [ 0.177577] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.177578] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.183007] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.194850] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.207326] ACPI: Dynamic OEM Table Load:
    [ 0.207339] ACPI: SSDT 0xFFFF880213EE7000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.220827] ACPI: Dynamic OEM Table Load:
    [ 0.220838] ACPI: SSDT 0xFFFF880213F81000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.237345] ACPI: Dynamic OEM Table Load:
    [ 0.237354] ACPI: SSDT 0xFFFF880213F56200 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.255255] ACPI: Interpreter enabled
    [ 0.255267] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.255275] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.255298] ACPI: (supports S0 S3 S4 S5)
    [ 0.255300] ACPI: Using IOAPIC for interrupt routing
    [ 0.255336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.268419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.268426] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.268573] \_SB_.PCI0:_OSC invalid UUID
    [ 0.268575] _OSC request data:1 1f 0
    [ 0.268579] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.269580] PCI host bridge to bus 0000:00
    [ 0.269584] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.269586] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.269588] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.269590] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.269592] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
    [ 0.269601] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.269803] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.269817] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.269826] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.269831] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
    [ 0.270019] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.270029] pci 0000:00:03.0: reg 0x10: [mem 0xf0510000-0xf0513fff 64bit]
    [ 0.270244] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.270263] pci 0000:00:14.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit]
    [ 0.270324] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.270459] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.270505] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.270526] pci 0000:00:16.0: reg 0x10: [mem 0xf0519000-0xf051901f 64bit]
    [ 0.270598] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.270790] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.270806] pci 0000:00:1b.0: reg 0x10: [mem 0xf0514000-0xf0517fff 64bit]
    [ 0.270876] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.271011] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.271060] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 0.271140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.271279] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.271327] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
    [ 0.271410] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.271549] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.271602] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.271624] pci 0000:00:1d.0: reg 0x10: [mem 0xf051d000-0xf051d3ff]
    [ 0.271716] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.271867] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.271914] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.272193] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.272209] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
    [ 0.272217] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
    [ 0.272225] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
    [ 0.272232] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
    [ 0.272240] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
    [ 0.272247] pci 0000:00:1f.2: reg 0x24: [mem 0xf051c000-0xf051c7ff]
    [ 0.272285] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.272451] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.272466] pci 0000:00:1f.3: reg 0x10: [mem 0xf0518000-0xf05180ff 64bit]
    [ 0.272486] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 0.272737] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.272853] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.272899] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
    [ 0.273097] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.273145] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.277341] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.277347] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.294607] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.294666] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294723] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [ 0.294778] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.294832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.294940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.294995] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.295346] ACPI: Enabled 5 GPEs in block 00 to 7F
    [ 0.295416] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
    [ 0.295555] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.295559] vgaarb: loaded
    [ 0.295560] vgaarb: bridge control possible 0000:00:02.0
    [ 0.295603] PCI: Using ACPI for IRQ routing
    [ 0.297024] PCI: pci_cache_line_size set to 64 bytes
    [ 0.297085] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 0.297087] e820: reserve RAM buffer [mem 0xc287a000-0xc3ffffff]
    [ 0.297088] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
    [ 0.297209] NetLabel: Initializing
    [ 0.297211] NetLabel: domain hash size = 128
    [ 0.297212] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.297225] NetLabel: unlabeled traffic allowed by default
    [ 0.297250] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.297256] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.299294] Switched to clocksource hpet
    [ 0.305097] pnp: PnP ACPI init
    [ 0.305113] ACPI: bus type PNP registered
    [ 0.305253] system 00:00: [io 0x0680-0x069f] has been reserved
    [ 0.305256] system 00:00: [io 0xffff] has been reserved
    [ 0.305259] system 00:00: [io 0xffff] has been reserved
    [ 0.305262] system 00:00: [io 0xffff] has been reserved
    [ 0.305265] system 00:00: [io 0x1800-0x18fe] could not be reserved
    [ 0.305267] system 00:00: [io 0x164e-0x164f] has been reserved
    [ 0.305270] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.305325] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.305378] system 00:02: [io 0x1854-0x1857] has been reserved
    [ 0.305381] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.305426] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.305459] pnp 00:04: Plug and Play ACPI device, IDs SYN0608 PNP0f03 (active)
    [ 0.305612] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.305614] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.305617] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.305619] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.305621] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.305623] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.305625] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.305627] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.305630] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.305632] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.305634] system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved
    [ 0.305637] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.305958] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
    [ 0.305961] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
    [ 0.305971] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
    [ 0.305974] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.306696] pnp: PnP ACPI: found 7 devices
    [ 0.306698] ACPI: bus type PNP unregistered
    [ 0.313588] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.313602] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.313608] pci 0000:00:1c.2: bridge window [mem 0xf0400000-0xf04fffff]
    [ 0.313617] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.313620] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.313622] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.313624] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
    [ 0.313626] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
    [ 0.313661] NET: Registered protocol family 2
    [ 0.313895] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.314065] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.314196] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.314216] TCP: reno registered
    [ 0.314229] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.314260] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.314329] NET: Registered protocol family 1
    [ 0.314345] pci 0000:00:02.0: Boot video device
    [ 0.314427] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.314429] pci 0000:00:14.0: PCI INT A: no GSI
    [ 0.314520] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.314702] PCI: CLS 64 bytes, default 64
    [ 0.314746] Unpacking initramfs...
    [ 0.389760] Freeing initrd memory: 3340K (ffff88003796a000 - ffff880037cad000)
    [ 0.389768] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.389771] software IO TLB [mem 0xbe87a000-0xc287a000] (64MB) mapped at [ffff8800be87a000-ffff8800c2879fff]
    [ 0.389991] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.390043] Scanning for low memory corruption every 60 seconds
    [ 0.390383] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.390776] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.392315] zbud: loaded
    [ 0.392526] VFS: Disk quotas dquot_6.5.2
    [ 0.392564] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.392709] msgmni has been set to 15022
    [ 0.392776] Key type big_key registered
    [ 0.392952] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.393009] io scheduler noop registered
    [ 0.393014] io scheduler deadline registered
    [ 0.393072] io scheduler cfq registered (default)
    [ 0.393422] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.393440] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.393482] intel_idle: MWAIT substates: 0x11142120
    [ 0.393484] intel_idle: v0.4 model 0x45
    [ 0.393485] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.393772] GHES: HEST is not enabled!
    [ 0.393860] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.394367] Linux agpgart interface v0.103
    [ 0.394421] rtc_cmos 00:01: RTC can wake from S4
    [ 0.394566] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [ 0.394596] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.394611] Intel P-state driver initializing.
    [ 0.394625] Intel pstate controlling: cpu 0
    [ 0.394647] Intel pstate controlling: cpu 1
    [ 0.394663] Intel pstate controlling: cpu 2
    [ 0.394684] Intel pstate controlling: cpu 3
    [ 0.394756] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.395139] TCP: cubic registered
    [ 0.395367] NET: Registered protocol family 10
    [ 0.395811] NET: Registered protocol family 17
    [ 0.396487] registered taskstats version 1
    [ 0.397305] Magic number: 2:622:755
    [ 0.397469] rtc_cmos 00:01: setting system clock to 2014-10-21 22:42:27 UTC (1413931347)
    [ 0.397659] PM: Hibernation image not present or could not be loaded.
    [ 0.399550] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 0.399554] Write protecting the kernel read-only data: 8192k
    [ 0.403618] Freeing unused kernel memory: 796K (ffff880001539000 - ffff880001600000)
    [ 0.404603] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 0.411279] random: systemd-tmpfile urandom read with 4 bits of entropy available
    [ 0.412549] systemd-udevd[57]: starting version 216
    [ 0.429661] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 0.430313] sdhci: Secure Digital Host Controller Interface driver
    [ 0.430315] sdhci: Copyright(c) Pierre Ossman
    [ 0.435942] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.436007] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.441502] ACPI: bus type USB registered
    [ 0.441544] usbcore: registered new interface driver usbfs
    [ 0.441562] usbcore: registered new interface driver hub
    [ 0.441712] usbcore: registered new device driver usb
    [ 0.442370] SCSI subsystem initialized
    [ 0.442606] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.442897] ehci-pci: EHCI PCI platform driver
    [ 0.443091] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.443106] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [ 0.443121] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.444256] libata version 3.00 loaded.
    [ 0.447021] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.447046] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf051d000
    [ 0.456197] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.456468] hub 1-0:1.0: USB hub found
    [ 0.456636] hub 1-0:1.0: 2 ports detected
    [ 0.456998] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.457003] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
    [ 0.457028] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.457038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.457132] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.457158] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 0.457437] hub 2-0:1.0: USB hub found
    [ 0.457454] hub 2-0:1.0: 9 ports detected
    [ 0.460686] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.460692] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.460861] hub 3-0:1.0: USB hub found
    [ 0.460871] hub 3-0:1.0: 4 ports detected
    [ 0.461773] ahci 0000:00:1f.2: version 3.0
    [ 0.461915] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X
    [ 0.471676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.472802] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x4 impl SATA mode
    [ 0.472807] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
    [ 0.473307] scsi0 : ahci
    [ 0.473445] scsi1 : ahci
    [ 0.473555] scsi2 : ahci
    [ 0.473668] scsi3 : ahci
    [ 0.473715] ata1: DUMMY
    [ 0.473717] ata2: DUMMY
    [ 0.473719] ata3: SATA max UDMA/133 abar m2048@0xf051c000 port 0xf051c200 irq 57
    [ 0.473721] ata4: DUMMY
    [ 0.763125] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.793107] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.793458] ata3.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110F, max UDMA/133
    [ 0.793461] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 0.794069] ata3.00: configured for UDMA/133
    [ 0.794234] scsi 2:0:0:0: Direct-Access ATA LITEONIT LMT-256 10F PQ: 0 ANSI: 5
    [ 0.798767] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
    [ 0.798902] sd 2:0:0:0: [sda] Write Protect is off
    [ 0.798906] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 0.798943] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 0.799393] sda: sda3 sda4
    [ 0.799749] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 0.841216] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 0.887143] hub 1-1:1.0: USB hub found
    [ 0.887202] hub 1-1:1.0: 8 ports detected
    [ 0.946321] systemd[1]: Cannot add dependency job for unit nfs-server.target, ignoring: Unit nfs-server.target failed to load: No such file or directory.
    [ 0.946348] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 0.960139] EXT4-fs (sda4): re-mounted. Opts: data=ordered,discard
    [ 0.981520] FS-Cache: Loaded
    [ 0.992070] RPC: Registered named UNIX socket transport module.
    [ 0.992075] RPC: Registered udp transport module.
    [ 0.992077] RPC: Registered tcp transport module.
    [ 0.992079] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 1.004660] FS-Cache: Netfs 'nfs' registered for caching
    [ 1.007058] Netfilter messages via NETLINK v0.30.
    [ 1.008839] nf_tables: (c) 2007-2009 Patrick McHardy <[email protected]>
    [ 1.023856] vboxdrv: Found 4 processor cores.
    [ 1.024080] vboxdrv: fAsync=0 offMin=0x2c2 offMax=0x31e0
    [ 1.024169] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 1.024172] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
    [ 1.046603] usb 2-3: new full-speed USB device number 2 using xhci_hcd
    [ 1.322293] systemd-udevd[170]: starting version 216
    [ 1.380209] usb 2-5: new high-speed USB device number 3 using xhci_hcd
    [ 1.393592] tsc: Refined TSC clocksource calibration: 2394.460 MHz
    [ 1.439202] systemd-journald[135]: Received request to flush runtime journal from PID 1
    [ 1.471000] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.476250] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 1.510556] thermal LNXTHERM:00: registered as thermal_zone0
    [ 1.510560] ACPI: Thermal Zone [TZ00] (28 C)
    [ 1.510856] thermal LNXTHERM:01: registered as thermal_zone1
    [ 1.510860] ACPI: Thermal Zone [TZ01] (30 C)
    [ 1.516235] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.526161] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
    [ 1.526172] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 1.545038] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 1.552395] cfg80211: Calling CRDA to update world regulatory domain
    [ 1.576090] [drm] Initialized drm 1.1.0 20060810
    [ 1.580291] random: nonblocking pool is initialized
    [ 1.596486] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 1.596490] Copyright(c) 2003- 2014 Intel Corporation
    [ 1.596517] snd_hda_intel: probe of 0000:00:03.0 failed with error -2
    [ 1.596724] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 1.597671] iwlwifi 0000:02:00.0: irq 60 for MSI/MSI-X
    [ 1.606282] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
    [ 1.622623] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 1.622630] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.622633] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
    [ 1.622636] sound hdaudioC0D0: mono: mono_out=0x0
    [ 1.622639] sound hdaudioC0D0: inputs:
    [ 1.622643] sound hdaudioC0D0: Headphone Mic=0x19
    [ 1.622646] sound hdaudioC0D0: Headset Mic=0x1b
    [ 1.622649] sound hdaudioC0D0: Internal Mic=0x12
    [ 1.627117] ACPI: AC Adapter [ADP0] (off-line)
    [ 1.628753] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 1.628924] ACPI: Power Button [PWRB]
    [ 1.629010] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
    [ 1.630785] ACPI: Lid Switch [LID0]
    [ 1.630887] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    [ 1.631327] ACPI: Power Button [PWRF]
    [ 1.633943] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input3
    [ 1.634197] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 1.635366] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635406] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635428] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635449] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x16
    [ 1.635520] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 1.639579] ACPI: Battery Slot [BAT0] (battery present)
    [ 1.640267] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
    [ 1.640997] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.641000] wmi: Mapper loaded
    [ 1.641249] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.644274] AVX2 version of gcm_enc/dec engaged.
    [ 1.662640] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 1.707814] iTCO_vendor_support: vendor-support=0
    [ 1.709016] [drm] Memory usable by graphics device = 2048M
    [ 1.709022] [drm] Replacing VGA console driver
    [ 1.710234] Console: switching to colour dummy device 80x25
    [ 1.710749] hid-rmi 0018:06CB:2734.0001: Scanning PDT...
    [ 1.711895] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.711954] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 1.712089] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.713279] hid-rmi 0018:06CB:2734.0001: Found F34 on page 0x00
    [ 1.715870] hid-rmi 0018:06CB:2734.0001: Found F01 on page 0x00
    [ 1.718203] hid-rmi 0018:06CB:2734.0001: Found F11 on page 0x00
    [ 1.724578] hid-rmi 0018:06CB:2734.0001: Found F54 on page 0x01
    [ 1.727275] hid-rmi 0018:06CB:2734.0001: Found F30 on page 0x01
    [ 1.730545] i915 0000:00:02.0: irq 61 for MSI/MSI-X
    [ 1.730561] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.730563] [drm] Driver supports precise vblank timestamp query.
    [ 1.730596] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.733539] hid-rmi 0018:06CB:2734.0001: Found F55 on page 0x02
    [ 1.738729] hid-rmi 0018:06CB:2734.0001: Found F51 on page 0x03
    [ 1.740512] usb 2-6: new full-speed USB device number 4 using xhci_hcd
    [ 1.744701] hid-rmi 0018:06CB:2734.0001: rmi_scan_pdt: Done with PDT scan.
    [ 1.756260] [drm] VBT doesn't support DRRS
    [ 1.758240] hid-rmi 0018:06CB:2734.0001: rmi_populate_f11: size in mm: 97 x 59
    [ 1.766636] input: DLL060A:00 06CB:2734 as /devices/pci0000:00/INT33C3:00/i2c-0/i2c-DLL060A:00/0018:06CB:2734.0001/input/input8
    [ 1.766734] hid-rmi 0018:06CB:2734.0001: input,hidraw0: <UNKNOWN> HID v1.00 Pointer [DLL060A:00 06CB:2734] on
    [ 1.775456] fbcon: inteldrmfb (fb0) is primary device
    [ 1.802968] input: Dell WMI hotkeys as /devices/virtual/input/input9
    [ 1.808667] mousedev: PS/2 mouse device common for all mice
    [ 1.841252] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 1.842535] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.842776] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 1.854793] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 2.394398] Switched to clocksource tsc
    [ 2.838140] Console: switching to colour frame buffer device 240x67
    [ 2.845934] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 2.845936] i915 0000:00:02.0: registered panic notifier
    [ 2.876371] media: Linux media interface: v0.10
    [ 2.876864] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 2.877001] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
    [ 2.877148] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.879690] usbcore: registered new interface driver usbhid
    [ 2.879694] usbhid: USB HID core driver
    [ 2.883145] Linux video capture interface: v2.00
    [ 2.892232] input: SYNAPTICS Synaptics Large Touch Screen as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:06CB:0AF8.0002/input/input11
    [ 2.892497] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
    [ 2.895106] hid-multitouch 0003:06CB:0AF8.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [SYNAPTICS Synaptics Large Touch Screen] on usb-0000:00:14.0-3/input0
    [ 2.895830] Bluetooth: Core ver 2.19
    [ 2.895849] NET: Registered protocol family 31
    [ 2.895852] Bluetooth: HCI device and connection manager initialized
    [ 2.895861] Bluetooth: HCI socket layer initialized
    [ 2.895864] Bluetooth: L2CAP socket layer initialized
    [ 2.895877] Bluetooth: SCO socket layer initialized
    [ 2.901636] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input13
    [ 2.901827] usbcore: registered new interface driver uvcvideo
    [ 2.901830] USB Video Class driver (1.1.1)
    [ 2.910511] usbcore: registered new interface driver btusb
    [ 2.925460] Bluetooth: hci0: read Intel version: 370710018002030d2e
    [ 2.925464] Bluetooth: hci0: Intel device is already patched. patch num: 2e
    [ 3.331899] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 11.275262] systemd-journald[135]: File /var/log/journal/88482a6e208046b4ab2b978eaa052ecd/user-1001.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 35.164461] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 35.241753] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 35.241999] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 35.255097] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 36.055112] wlan0: authenticate with c0:25:06:84:57:f0
    [ 36.058891] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
    [ 36.061335] wlan0: authenticated
    [ 36.061563] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
    [ 36.067260] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
    [ 36.070080] wlan0: associated
    [ 36.070111] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 36.070172] cfg80211: Calling CRDA to update world regulatory domain
    [ 4501.338278] PM: Syncing filesystems ...
    [ 4501.341188] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
    [ 4501.341196] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 4501.348617] done.
    [ 4501.348622] PM: Preparing system for mem sleep
    [ 4501.349019] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 4501.350459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 4501.351580] PM: Entering mem sleep
    [ 4501.351657] Suspending console(s) (use no_console_suspend to debug)
    [ 4501.351917] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 4501.358219] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
    [ 4501.358222] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 4501.361609] cfg80211: Calling CRDA for country: DE
    [ 4501.362122] sd 2:0:0:0: [sda] Synchronizing SCSI cache
    [ 4501.362185] sd 2:0:0:0: [sda] Stopping disk
    [ 4501.992409] PM: suspend of devices complete after 640.028 msecs
    [ 4502.005724] PM: late suspend of devices complete after 13.299 msecs
    [ 4502.006247] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 4502.006367] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 4502.019376] PM: noirq suspend of devices complete after 13.638 msecs
    [ 4502.019816] ACPI: Preparing to enter system sleep state S3
    [ 4502.020586] PM: Saving platform NVS memory
    [ 4502.021109] Disabling non-boot CPUs ...
    [ 4502.021139] intel_pstate CPU 1 exiting
    [ 4502.022404] kvm: disabling virtualization on CPU1
    [ 4502.022854] smpboot: CPU 1 is now offline
    [ 4502.023143] intel_pstate CPU 2 exiting
    [ 4502.024386] kvm: disabling virtualization on CPU2
    [ 4502.125774] smpboot: CPU 2 is now offline
    [ 4502.126039] intel_pstate CPU 3 exiting
    [ 4502.127395] kvm: disabling virtualization on CPU3
    [ 4502.229207] smpboot: CPU 3 is now offline
    [ 4502.232189] ACPI: Low-level resume complete
    [ 4502.232259] PM: Restoring platform NVS memory
    [ 4502.232774] Enabling non-boot CPUs ...
    [ 4502.232814] x86: Booting SMP configuration:
    [ 4502.232815] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 4502.245238] kvm: enabling virtualization on CPU1
    [ 4502.247462] Intel pstate controlling: cpu 1
    [ 4502.247514] CPU1 is up
    [ 4502.247533] smpboot: Booting Node 0 Processor 2 APIC 0x2
    [ 4502.259870] kvm: enabling virtualization on CPU2
    [ 4502.262107] Intel pstate controlling: cpu 2
    [ 4502.262155] CPU2 is up
    [ 4502.262172] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 4502.274504] kvm: enabling virtualization on CPU3
    [ 4502.276760] Intel pstate controlling: cpu 3
    [ 4502.276807] CPU3 is up
    [ 4502.282141] ACPI: Waking up from system sleep state S3
    [ 4502.302447] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 4502.302450] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 4502.302690] PM: noirq resume of devices complete after 11.863 msecs
    [ 4502.303102] PM: early resume of devices complete after 0.384 msecs
    [ 4502.303194] usb usb2: root hub lost power or was reset
    [ 4502.303197] usb usb3: root hub lost power or was reset
    [ 4502.315679] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 4502.315810] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 4502.329054] sd 2:0:0:0: [sda] Starting disk
    [ 4502.390642] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 4502.535888] usb 1-1: reset high-speed USB device number 2 using ehci-pci
    [ 4502.643402] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4502.643646] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 4502.649288] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 4502.652119] ata3.00: configured for UDMA/133
    [ 4502.766135] usb 2-3: reset full-speed USB device number 2 using xhci_hcd
    [ 4502.939946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c09480
    [ 4502.939950] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880212c094c8
    [ 4503.099825] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
    [ 4503.273741] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a00
    [ 4503.273745] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a48
    [ 4503.273748] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bdea5a90
    [ 4503.273750] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6000
    [ 4503.273752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020c2a6048
    [ 4503.274732] PM: resume of devices complete after 970.836 msecs
    [ 4503.275664] PM: Finishing wakeup.
    [ 4503.275668] Restarting tasks ...
    [ 4503.275774] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.276362] usb 2-5: USB disconnect, device number 3
    [ 4503.276546] pci_bus 0000:01: Allocating resources
    [ 4503.276576] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 4503.276585] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 4503.276592] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 4503.276596] done.
    [ 4503.276614] pci_bus 0000:02: Allocating resources
    [ 4503.276646] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 4503.276653] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 4503.276662] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 4503.276675] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 4503.276681] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 4503.276688] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 4503.276695] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 4503.276701] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 4503.276712] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff]
    [ 4503.276726] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref]
    [ 4503.276739] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
    [ 4503.276748] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 4503.276756] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
    [ 4503.276773] pci 0000:00:00.0: no hotplug settings from platform
    [ 4503.276778] pci 0000:00:00.0: using default PCI settings
    [ 4503.276791] i915 0000:00:02.0: no hotplug settings from platform
    [ 4503.276795] i915 0000:00:02.0: using default PCI settings
    [ 4503.276809] pci 0000:00:03.0: no hotplug settings from platform
    [ 4503.276816] xhci_hcd 0000:00:14.0: no hotplug settings from platform
    [ 4503.276820] xhci_hcd 0000:00:14.0: using default PCI settings
    [ 4503.276836] mei_me 0000:00:16.0: no hotplug settings from platform
    [ 4503.276839] mei_me 0000:00:16.0: using default PCI settings
    [ 4503.276855] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 4503.276863] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 4503.276871] pcieport 0000:00:1c.2: no hotplug settings from platform
    [ 4503.276904] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.276912] ehci-pci 0000:00:1d.0: no hotplug settings from platform
    [ 4503.276917] ehci-pci 0000:00:1d.0: using default PCI settings
    [ 4503.276933] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 4503.276938] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 4503.276956] ahci 0000:00:1f.2: no hotplug settings from platform
    [ 4503.276961] ahci 0000:00:1f.2: using default PCI settings
    [ 4503.276976] pci 0000:00:1f.3: no hotplug settings from platform
    [ 4503.276980] pci 0000:00:1f.3: using default PCI settings
    [ 4503.277590] pci_bus 0000:01: Allocating resources
    [ 4503.277619] pci_bus 0000:02: Allocating resources
    [ 4503.277652] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 4503.277669] pci 0000:00:00.0: no hotplug settings from platform
    [ 4503.277673] pci 0000:00:00.0: using default PCI settings
    [ 4503.277686] i915 0000:00:02.0: no hotplug settings from platform
    [ 4503.277690] i915 0000:00:02.0: using default PCI settings
    [ 4503.277703] pci 0000:00:03.0: no hotplug settings from platform
    [ 4503.277711] xhci_hcd 0000:00:14.0: no hotplug settings from platform
    [ 4503.277716] xhci_hcd 0000:00:14.0: using default PCI settings
    [ 4503.277731] mei_me 0000:00:16.0: no hotplug settings from platform
    [ 4503.277736] mei_me 0000:00:16.0: using default PCI settings
    [ 4503.277751] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 4503.277759] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 4503.277767] pcieport 0000:00:1c.2: no hotplug settings from platform
    [ 4503.277801] iwlwifi 0000:02:00.0: no hotplug settings from platform
    [ 4503.277809] ehci-pci 0000:00:1d.0: no hotplug settings from platform
    [ 4503.277814] ehci-pci 0000:00:1d.0: using default PCI settings
    [ 4503.277830] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 4503.277835] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 4503.277852] ahci 0000:00:1f.2: no hotplug settings from platform
    [ 4503.277857] ahci 0000:00:1f.2: using default PCI settings
    [ 4503.277871] pci 0000:00:1f.3: no hotplug settings from platform
    [ 4503.277875] pci 0000:00:1f.3: using default PCI settings
    [ 4503.287972] Bluetooth: hci0: read Intel version: 370710018002030d00
    [ 4503.551878] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
    [ 4503.596787] usb 2-5: new high-speed USB device number 5 using xhci_hcd
    [ 4503.633858] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 4503.755400] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
    [ 4503.797807] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
    [ 4503.801045] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input16
    [ 4503.943676] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 4506.058296] dell_wmi: Unknown key e00e pressed
    [ 4507.048423] wlan0: authenticate with c0:25:06:84:57:f0
    [ 4507.051164] wlan0: send auth to c0:25:06:84:57:f0 (try 1/3)
    [ 4507.053766] wlan0: authenticated
    [ 4507.056205] wlan0: associate with c0:25:06:84:57:f0 (try 1/3)
    [ 4507.062403] wlan0: RX AssocResp from c0:25:06:84:57:f0 (capab=0x431 status=0 aid=1)
    [ 4507.065241] wlan0: associated
    [ 4507.065268] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 4812.948936] usb 2-2: new high-speed USB device number 6 using xhci_hcd
    [ 4813.124097] hub 2-2:1.0: USB hub found
    [ 4813.124371] hub 2-2:1.0: 4 ports detected
    [ 4813.392831] usb 2-2.2: new full-speed USB device number 7 using xhci_hcd
    [ 4813.477901] usb 2-2.2: ep 0x85 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 4813.495517] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2:1.3/0003:08BB:2902.0003/input/input17
    [ 4813.495657] hid-generic 0003:08BB:2902.0003: input,hidraw2: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:14.0-2.2/input3
    [ 4813.515300] usbcore: registered new interface driver snd-usb-audio
    [ 4813.546263] usb 2-2.3: new full-speed USB device number 8 using xhci_hcd
    [ 4813.648070] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2.3/input2
    [ 4813.699821] usb 2-2.4: new high-speed USB device number 9 using xhci_hcd
    [ 4813.700997] input: Logitech Unifying Device. Wireless PID:1028 as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.3/2-2.3:1.2/0003:046D:C52B.0006/0003:046D:C52B.0007/input/input18
    [ 4813.701200] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-2.3:1
    [ 4814.121899] ax88179_178a 2-2.4:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:24:9b:0a:27:f6
    [ 4814.121931] usbcore: registered new interface driver ax88179_178a
    [ 4814.442429] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 4817.483762] ax88179_178a 2-2.4:1.0 eth0: ax88179 - Link status is: 1
    [ 4817.485665] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 6509.605763] usb 2-2: USB disconnect, device number 6
    [ 6509.605773] usb 2-2.2: USB disconnect, device number 7
    [ 6509.660447] usb 2-2.3: USB disconnect, device number 8
    [ 6509.692281] usb 2-2.4: USB disconnect, device number 9
    [ 6509.692540] ax88179_178a 2-2.4:1.0 eth0: unregister 'ax88179_178a' usb-0000:00:14.0-2.4, ASIX AX88179 USB 3.0 Gigabit Ethernet
    [ 6509.692573] ax88179_178a 2-2.4:1.0 eth0: Failed to read reg index 0x0002: -19
    [ 6509.692584] ax88179_178a 2-2.4:1.0 eth0: Failed to write reg index 0x0002: -19
    [ 6509.721655] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
    [ 6509.721669] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19
    [ 6509.721678] ax88179_178a 2-2.4:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19
    [ 6511.071805] PM: Syncing filesystems ...
    [ 6511.077462] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0).
    [ 6511.077473] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 6511.085453] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0).
    [ 6511.085464] atkbd serio0: Use 'setkeycodes e072 <keycode>' to make it known.
    [ 6511.087129] done.
    [ 6511.087139] PM: Preparing system for mem sleep
    [ 6511.087676] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 6511.089183] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 6511.090294] PM: Entering mem sleep
    [ 6511.090393] Suspending console(s) (use no_console_suspend to debug)
    [ 6511.090786] wlan0: deauthenticating from c0:25:06:84:57:f0 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 6511.100925] cfg80211: Calling CRDA to update world regulatory domain
    [ 6511.101532] sd 2:0:0:0: [sda] Synchronizing SCSI cache
    [ 6511.101598] sd 2:0:0:0: [sda] Stopping disk
    [ 6511.720807] PM: suspend of devices complete after 629.628 msecs
    [ 6511.734165] PM: late suspend of devices complete after 13.343 msecs
    [ 6511.734991] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 6511.735113] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 6511.747808] PM: noirq suspend of devices complete after 13.629 msecs
    [ 6511.748271] ACPI: Preparing to enter system sleep state S3
    [ 6511.749033] PM: Saving platform NVS memory
    [ 6511.749584] Disabling non-boot CPUs ...
    [ 6511.749628] intel_pstate CPU 1 exiting
    [ 6511.751130] kvm: disabling virtualization on CPU1
    [ 6511.752157] smpboot: CPU 1 is now offline
    [ 6511.752650] intel_pstate CPU 2 exiting
    [ 6511.754091] kvm: disabling virtualization on CPU2
    [ 6511.754112] smpboot: CPU 2 is now offline
    [ 6511.755147] intel_pstate CPU 3 exiting
    [ 6511.756491] kvm: disabling virtualization on CPU3
    [ 6511.857520] smpboot: CPU 3 is now offline
    [ 6511.860099] ACPI: Low-level resume complete
    [ 6511.860168] PM: Restoring platform NVS memory
    [ 6511.860682] Enabling non-boot CPUs ...
    [ 6511.860725] x86: Booting SMP configuration:
    [ 6511.860726] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 6511.873161] kvm: enabling virtualization on CPU1
    [ 6511.875384] Intel pstate controlling: cpu 1
    [ 6511.875441] CPU1 is up
    [ 6511.875462] smpboot: Booting Node 0 Processor 2 APIC 0x2
    [ 6511.887813] kvm: enabling virtualization on CPU2
    [ 6511.890055] Intel pstate controlling: cpu 2
    [ 6511.890104] CPU2 is up
    [ 6511.890121] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 6511.902450] kvm: enabling virtualization on CPU3
    [ 6511.904715] Intel pstate controlling: cpu 3
    [ 6511.904763] CPU3 is up
    [ 6511.910077] ACPI: Waking up from system sleep state S3
    [ 6511.930462] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 6511.930469] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 6511.930713] PM: noirq resume of devices complete after 11.834 msecs
    [ 6511.931215] PM: early resume of devices complete after 0.474 msecs
    [ 6511.931290] mei_me 0000:00:16.0: irq 58 for MSI/MSI-X
    [ 6511.931308] usb usb2: root hub lost power or was reset
    [ 6511.931310] usb usb3: root hub lost power or was reset
    [ 6511.932049] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 6512.019117] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X
    [ 6512.030458] sd 2:0:0:0: [sda] Starting disk
    [ 6512.143743] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 6512.143995] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 6512.237297] usb 1-1: reset high-speed USB device number 2 using ehci-pci
    [ 6512.350707] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 6512.353607] ata3.0

    Update: I mucked about more after making this post; I installed gnome-alsa-mixer and checked the "internal mic" option and "Auto-Mute mode" (both were off), after this my headphone output works again, and does the built-in microphone (!)
    I have no idea how I ended up in this "broken" situation, or even what this option does, or how to use it without gnome-alsa-mixer (I had to install 15 packages to get this, as I normally don't use gnome)... Sound on Linux still seems no better than when I started using it 15 years ago :-( (I spent about 5 hours on this...)

Maybe you are looking for

  • Field Bus. Area is a required field for G/L account 5000 20000500

    Dear all, I bumped into the following error when trying to perform GR-101 in MIGO. My question is "Do you think the error is due to inconsistency between MM movement type & GL master data.  Could it be MM movement type used in the transaction below?

  • Cannot Re-Eenable Acrobat Add-in in Word 2007

    The Adobe Acrobat add-in in Word 2007 has become disabled and I cannot re-enable it.  When I go to Word Options - Add-ins - Manage COM Add-ins and try to tick the disabled Acrobat add-in I get the error: "This add-in is installed for all users on thi

  • Bluetooth streaming issues iOS 8.1.2

    I have been seeing issues with Bluetooth audio streaming on my iPhone 5c, when connected to Harman/Kardon Soundsticks III BT. Initially I thought it was an issue with the speakers, but changed my mind when my friend's Nexus 4 was able to stream audio

  • Photoshop CS4 Doesn't Recognize Printer

    Acer Laptop Windows Vista 3 gb ram 160 gb hd Printer - Canon Pixma Pro 9500 Problem- I recently installed Photoshop CS4. I still have CS3 installed. When I go to print from CS4, it prompts me that there is no printer installed on my pc. (CS3 will sti

  • My "menu bar" moves to the right

    My menu bar slowly drifts to away from the top left corner of my screen. I never see it happen but I just look up and it's moved. I am on 10.8.2 and when I open the notification centre, which shifts all my windows back to the left, the menu bar reset