Win95-Installation of Discoverer User edition

If have installed the User Edition on a win95 computer. But now i have problems with my seriell connections. One programm of psion can4t connect to the palm and the computer is very slow.
Which dll would be installed into win95?
What is the Problem

Are you sure the Discoverer installation was the only change made to your computer? Discoverer doesn't use any serial ports, nor does any of our code try to deal with ports. Many of us here have PDA's and are not affected by installing Discoverer software.
Regards,
Oracle Discoverer Team

Similar Messages

Can't see business areas in Discoverer user edition

I have setup a business area and folders in admin edition. But when I go to user edition I don't get the list in available business areas. The folders are set to 'visible to user'. What could be the reason.
Thanks in advance.
Alok

Each user much have (security) access to the business area,
and have the 'user edition' privledge.
Both of these settings can be found in the Administration Edition
under the Tools menu.
While you're there, you can review the settings for the Query Governor
as well.
Regards,
John Hagel

User edition report got messed. Restore from DB Backup?

Hi All,
DBA new to discovere so excuse the ignorance.
Yesterday tried manipulating a report in Discoverer User Edition
There were 2 sheets, added one column in one of the sheet and saved the report. Surprisingly the other sheet 'Disappeared'.
Don't know wat happened, but I have already restored the DB from the previous backup on a separate machine since the report was saved in DB.
Now my question is:
HOW to restore the report from the backup? I'm an absolute novice and don't have much time to go thru the manual, just for now
TIA
Naveen

if you've restored apex to an auxiliary instance, then just log into apex on the auxiliary instance, and export the application (or application pages) that are missing.
its probably safer to do the following:
i) export your production apex appliation.
ii) import it to your auxiliary instance(using a different application id)
iii) copy the required pages from your auxiliary instance to your production instance copy
iv) verify your production instance copy works as expected
v) export your production instance copy from aux instance
vi) import v to your production instance.
I always export my apps and keep the exports under source control
that way, I can always get something back.
NB: The aux instance will need its own http server.

Command Lines in the User Edition, Discovere 4i

Dear All,
I am searching for an answer regarding the chance to use the batch command line in the Discoverer 4i user edition to export an xls file with the pivot format.
It is not possible to do this in the previous version, but it's possible in the 4i version choosing the xls pivot format while exporting the report interactively.
So we are looking for a specific parameter to be used in the command line.
Thank you for your help,
Carola Buora

Hi Carola,
May I suggest reposting this question to the Dicoverer forum
http://forums.oracle.com/forums/forum.jsp?id=422740
Your chances for getting the right set of answers are probably much better there. Hope this helps.
Cheers,
-lars

Discoverer 3.1.42 User Edition Bug? EUL Corruption?

We have applied the 3.1.42 patchset but are experiencing some serious buggy behaviour.
The worst problem appears in User Edition if a Parameter is used in a Calculation and there are also Totals on one or more columns. When first created, this situation may work for a while, but further manipulations usually cause the query to crash with a message like: "Internal EUL error: EULParseNodeType error in canonical formula" (apologies: I don't have the exact message in front of me here). Once that error occurs, it seems to always occur in that Worksheet when a Calculation involves a Parameter AND there is a Total declared.
Is this a known bug? Has anyone else run across this? Does the Worksheet get corrupted in the EUL?
This one problem (oh, there are several others) is causing some significant grief.
Help is appreciated.
null

I haven't seen what you are mentioning yet. However, if you create a calculation or parameter in 3.142 and one of your users still has 3.141, the user will get an error message: Invalid combination of filters or calculations, query cannot be resolved. Upgrading to 3.142 corrects this for the user.

Problem Reg. Post Installation of Discovere 3.1.36

Hi All,
I'm new to Discoverer tool(Version : 3.1.36) . I am trying to install it. I've installed the user edition, But I've not installed the Administration edition. When I am trying to connect to database, it is getting connected but, I'm unable to see the schema objects like tables etc. After installation of User edition, do i need to set any configuration like changing the tnsnames.Ora in case of forms 6i version. Pls help me.
Thanks in advance.
Regards,
Alok Dubey

Thank you for ur response. The problem is I' able to connect to database using Forms 6i. But I am unable to see any schema objects in the discoverer.
Regards,
Alok Dubey

Template Builder (BIPublisherDesktop.exe) installation for multiple users

Hello,
I tried to install version 10.1.3.4 of the template builder on a Citrix server (Metaframe 4.0) running under Windows 2003 SP2, and with Office 2003. Framework .NET 2.0 and JRE Sun 1.6 are also installed.
It works, but, in Word 2003, the "Oracle BI Publisher" menu is only available for the user who have made the installation. Other users can"t see it ?
I have monitored the registry during installation, and most of the keys are created in HKEY_CURRENT_USER, explaining why others can't see it.
Is there a way to make one install available for all users ?
Thanks.
Edited by: user528106 on 27 janv. 2009 01:31

Yes Rainer... I got the problem just now...
Thanks for the reply...
Regards,
Amit

Checkbox in discoverer desktop edition

Hi,
The query we are executing created for cross tab report have plenty of views and is returning null data which needs apps intialization which cannot be done from discoverer.
I think loging into Discoverer desktop edition with oracle applications user would resolve the same.
I have checked the checkbox in desktop edition and logged in as operations/welcome. but it is showing as invalid user name /password.
please help in setup that must required to check and login to oracle applications user. Also Provide if there is any alternative.
I would be very much thankful if you could help me on this.
Best Regards,
Katty.
Edited by: karthik.thadakamalla on May 10, 2009 11:49 PM

Hi,
The apps initialization can be done by Discoverer provided that you are connecting to an Apps mode EUL with an applications username and password.
You must specify that you want an Apps mode EUL when the EUL is created. Then when you connect to Disco Admin as the owner of the EUL you will be able to grant access privs and security to the Application users and responsbilities.
If you have an apps mode EUL and still get an invalid username/password then this could be because the application is running in secure mode. Then you need to copy the .dbc file to a local directory. Search this forum for details on how to do this.
Rod West

Problem while installing discoverer desktop edition

HI
I find few error messages while installing discoverer desktop edition..
When i give oracle home as
name:OracleHome92
Location: DiscovererDesk
it gives me a error
" oracle discoverer doesnot support multiple installations thus it cannot be installed on oracleHome92.It can only be installed on 'OraHome92'"
When i give oracle home as
name:OraHome92
It automatically takes my 9i oracle home path i.e E:\oracle\ora92 and gives me a error like
"The location specified 'E:\Oracle\ora92', is already used an oracle home for an
'Oracle 82 beta'.It cann't be used as an oracle home for nt."
I have oracle 9i and form6i,report 6i installed in my system.
Please suggest me ..
Regards,
Satya

Hi
The easiest way to get a fully working TNSNAMES in a version 4 environment is to use the Net 8 Configuration utility.
Here's a workflow:
1. From the Start button, select Start | Oracle for Windows NT | Oracle Net8 Easy Config
2. When it starts, check Add New Service and in the little box to the right type the name by which you want this connection to be known
3. Click the Next button
4. Select TCP/IP (Internet Protocol) and click the Next button
5. Enter the fully qualified domain name or IP address of the server that contains the database
6. In Port, enter the port number - it defaults to 1521
7. Click the Next button
8.In Database SID enter the name of the database, then click the Next button
9.Click the Test Service button
10. Provide a username and password for an account on the database, then click the Test button
11. If you see: Connecting.... The test did not succeed you got the username/password combination wrong or some other part of the setup
12. When you see: Connecting.... The connection test was successful click the Done button
13. Click the Next button
14. Click the Finish button
You should now have a valid TNSNAMES connection for use by Discoverer 4
Best wishes
Michael

How can a user (user edition) see a saved worksheet by other user

how can a user (user edition) see a saved worksheet that was saved by another if it was saved in the database?
thnx
Endre

If the user has given you permission to view their worksheet, then you should be able to open up an existing workbook as soon as you log into Discoverer. The disgression is up to the owner if you can view, or change their workbook.

New Apps User defaults with all User Edition Privileges - Security Breach?

Please check the following Scenario/Issue and please let me know if anyone has a solution for it.
1. In Apps, created following Responsibilities
- Payables Inquiry-Only User
- Projects Inquiry-Only User
2. In Discoverer Admin, Tools->Privileges, assigned following privilege to "Payables Inquiry-Only User"
- User Edition Parent only (unchecked all child privileges such as Create/Edit Query)
3. In Discoverer Admin, Tools->Security, mapped following Responsibilities/Business Areas (BA)
- Resp: Payables Inquiry-Only User BA: AP Payables
- Resp: Projects Inquiry-Only User BA: PA Projects
4. In Apps, created user DISC_INQUIRY_USER, assigned following responsibilities
- Payables Inquiry-Only User
- Projects Inquiry-Only User
5. At this stage, if user connects to User Edition;
- user is able to create new query in BA: AP Payables or BA: PA Projects depending on login Responsibility
- By default Discoverer assigns all User Edition Privileges to new Apps User including Create/Edit Query
Requirement
1. Create new Apps User DISC_INQUIRY_USER, assign it Inquiry-Only Responsbilities
2. Login to User Edition - DISC_INQUIRY_USER: Payables Inquiry-Only User
- User can inquiry Workbooks associated with Resp: Payables Inqiry-Only user
- Should not be able to create new workbooks
3. Login to User Edition - DISC_INQUIRY_USER: Projects Inquiry-Only User
- User can inquiry Workbooks associated with Resp: Projects Inquiry-Only User
- Should not be able to create new workbooks
Issue
There is time-gap between creating Apps User and login to Discoverer Admin to remove user privileges. This is security Breach, is their any way to change get around it.
- Discoverer gives precedence to Responsibility Privileges over User Privileges. Is their any way to change it?
- Is it possible to change default Privileges for new Apps User?
- I am facing this issue in Discoverer 4.1.48, Does discoverer Admin behaves differently in latest Versions?

Nobody helps you except yourself. ;)
So, this query get privileges for user PUBLIC
select eap.ap_id, eap.gp_app_id
from eul5_eul_users eeu,
eul5_access_privs eap
where eeu.eu_username = 'PUBLIC'
and eap.ap_eu_id = eeu.eu_id
and eap.ap_type = 'GP'
In my case
3001     1000
3002     1001
3003     1002
3004     1003
3005     1004
3006     1005
3015     1013
3016     1014
3017     1018
3018     1024
I research а corresponding between gp_app_id (second column) and real name of privilege and get the next list:
1000     Discoverer and Plus Privilege
1001     Create/Edit Query
1002     Item Drill
1003     Drill Out
1004     Grant Workbook
1005     Collect Query Statistics
1006     Administration Privilege
1007     Set Privilege
1008     Create/Edit Business Area
1009     Format Business Area
1010     Create/Edit Summaries
1012     Schedule Workbook
1013     Unknown
1014     Save Workbooks to Database
1015     Manage Scheduled Workbooks
1018     Unknown
1024     Create Link
So, the ID of privilege 'Save Workbooks to Database' is 1014. This privilege exists in table in spite of in Discoverer Administrator this option UNCHECK for user PUBLIC.
This is a REAL BUG!!!
Then I executed query
delete from eul5_access_privs where ap_id = 3016
and after that all became right.
Now please explain me this bug. And I have question - which privileges have IDs 1013 and 1018?
Thank you.

Install Disc 3i User Edition 3.3 on iAS 8i

how to make installation User Edition 3.3 on the iAS (Enterprise Edition) while its have Viewer Edition in it that cannot be remove.
or we can just install User Edition on it without removing the Viewer Editon?
thanks on advance.

I am upgrading to apex release 3.1.2. There is a patch, but I did not apply the patch yet since the install failed. Also, I've been searching & found a tutorial for installing APEX 2.2. It says that you need to install HTTP from the 10g companion cd prior to installing APEX. So, I'm guessing that I need to install HTTP first for 3.1.2. If that's true, then WHY doesn't the install instructions for 3.1 also say to install HTTP first? It is not clear! The 3.1 documentation only says you need to DECIDE which you're going to use: HTTP or embedded (which is in 11g). I thought that the install script would prompt me for my choice. So much for my interpretation skills.

9ias 1022 compatability with Discoverer Administration edition

Hi ...
I installed 9ias1.0.2.2.0 on 8.1.6 database.
I AM UNABLE TO CONNECT TO DATABASE through discoverer viewer .
I installed discoverer Administration edition 4.1.37 separately.
I installed end user layer tables into my database using
discoverer Administration edition 4.1.37 .But it was asking for
4.1.11 End user Layer tables. where can i get the the discoverer
administration edition version 4.1.11 software .
In oracle site i seen only 4.1.34 & 4.1.37 version for
discoverer administration.
I wouid appreciate any help.
Regards
Santhosh

Ranga,
The link provided:
http://otn.oracle.com/software/products/discoverer/content.html
is for Discoverer Administration 4.1.33f and the EUL tables shipped with it are not the right version that is needed by Discoverer Plus that ships with 9iAS 1.0.2.2. The release notes for 9iAS 1.0.2.2 mention that that the version needed is 4.1.36 or 4.1.37.
Thanks.
null

How to insert a logo in discoverer plus edition

Hi
I want to insert a logo/image file in discoverer plus edition(In Worksheet).
Please anyone help me on the same.
Regards
Sreehari

Hi Kranthi
Sorry but this is still not included with the 11g release.
The only change in 11g R1 is the underlying application server which has now become weblogic. The user interface and interoperability is the same as in 10.1.2.3.
11g R2 is due out in 2010 and so far no specs have been issued as to what might be included other than the interfacing to OBI EE 11g.
Best wishes
Michael

Starting 3i User Edition Web

Hi all,
how can I start the user edition without using the predefined html files. I want to start the discoverer directly from within the oracle portal.
Every time I trmed it I will be redirected to the start_ie.htm file.
Any help is welcome
Ingo

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Myra Joy Banzuela ([email protected]):
I've been looking for a list of all parameters and valid values that can be passed to the Discover 3i User Edition.
Thanks for any response
Myra<HR></BLOCKQUOTE>
Myra,
There are parameters that you can create in Discoverer, but these are ones that you build yourself - you decide what goes in to the parameter. The parameter becomes a condition on the report that is generated. They are usually based on items that are in the report and are created using Tools > Parameters.
There is no where that you can look up a list of parameters.
This information is taught in the Discoverer End User course. Please visit http://education.oracle.com for a list of our currently available classes.

Win95-Installation of Discoverer User edition

Similar Messages

Maybe you are looking for