Win98 not getting inventory scan

Our XP systems are getting the inventory scan and importing it into
the
database, but our Win98 systems are not.
Recently I deleted all the workstation objects, then ran a sync to the
database to clear it out. I then ran unreg32 at each workstation and
let
them reimport themselves and rerun the inventory scan.
The XP systems worked fine. The win98 systems imported into the NDS
with
the minimal workstation info. But none of the info got into the
database. When you look in nds and ask for more workstation info,
almost
everything comes up with "NO INFORMATION FOUND".
It looked like it was just scanning for delta info, so yesterday I
went
into ConsoleOne and checked start full scan for every win98
workstation.
Now when I look at the java interpereter on the console, Win98 systems
aren't showing up as getting scanned at all.
If I look at the Scan status, I get the following messages:
Scanner(Warning) : 027: Unable to read the sequence number from the
Workstation Object.
Scanner(Information) : 024: Initiated scan successfully.
Scanner(Information) : 009: Software Scan done using Microsoft
Installer
(MSI).
Before I asked for the full workstation scan, I would also get this
message, but I don't get it anymore.
Storer(Information) : 200: The Storer has updated the database.
Thanks,
Pam

[email protected]
> I suppose I could try upgrading the clients & see if the upgrade
> resets whatever is stuck?
For zen 3.0 you really are at the newest client you can be, or maybe
even too new.
I would try this next, although I don't know if it will fix it.
1. Make Sure the "Enable Software Scan" box is checked.
2. Create a new Workstation Package and reconfigure the inventory
policies.
3. Restart the server, unless you have already done that.
Let me know if that helps.
Jared L Jennings
Novell Support Forums SysOp
Geek by Nature, NetWare by Choice.

Similar Messages

Tomcat 3.2.1 and Win98 not getting along...

I have gone through almost every post on this problem and tried every suggestion, I also followed the directions on the Core Servlets and jsp's book web-site which seemed to be right and I still get this error which occurs when a new window pops up after running startup.batch
Exception in thread "main" java.lang.ExceptionInInitializerError: java.util.Miss
ingResourceException: Can't find bundle for base name javax.servlet.http.LocalSt
rings, locale en_US
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle
.java:712)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:683)
at java.util.ResourceBundle.getBundle(ResourceBundle.java:546)
at javax.servlet.http.HttpServlet.<clinit>(HttpServlet.java:144)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:237)
at org.apache.tomcat.core.ServletWrapper.loadServlet(ServletWrapper.java
:268)
at org.apache.tomcat.core.ServletWrapper.init(ServletWrapper.java:289)
at org.apache.tomcat.context.LoadOnStartupInterceptor.contextInit(LoadOn
StartupInterceptor.java:130)
at org.apache.tomcat.core.ContextManager.initContext(ContextManager.java
:491)
at org.apache.tomcat.core.ContextManager.init(ContextManager.java:453)
at org.apache.tomcat.startup.Tomcat.execute(Tomcat.java:195)
at org.apache.tomcat.startup.Tomcat.main(Tomcat.java:235)
pretty strange huh? Can someone help me please??

Well, nobody else seemed able to help me, but after going through hundreds of forum posts with similar problems I found the issue. I had put servlet.jar and jsp.jar in my jdk1.3.1\jre\lib\ext because someone else had offered that as a solution to servlets not compiling properly. Appartently this messes with the localstring bundles. So, if you are having this problem with an application, here is your solution. Don't put stuff in your ext directory. Peace

IS Retail - Inventory - Retail price BWGV0 is not getting populated

Hi ,
We have activated IS retail industry specific indicator in SBIW. Fo some reason when I do RSA3 in '2LIS_03_BF' , all the stock movements are displayed but the retial price field BWGV0 is not getting populated. Do you guys have come across this situation ? Please let me know.
Thanks
Hareesh

Some documents below might worth taking look..
Process key logic for MM inventory can be found in OSS note 492828
Logic for MM purchasing can be found in note 684465
Activating the process key logic in R/3 for MM should be as simple as setting the correct industry in MCB_ (also found under SBIW), but if it doesn't work look at OSS note 353042. In the end haveto use trans BF11 to add an entry to a table, even though the plugin is 2003.1 on R/3 4.6C.
352344
492828 Determining the transaction key for 2LIS_03_BF + 2LIS_03_UM
Hope it Helps
Chetan
@CP..
Hope it Helps
Chetan
@CP..

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do?

Trying to make a bootable disc but i keep getting this message as a failure notice. "Could not find any scan information. The source image needs to be imagescanned before it can be restored.", what can I do? Any help at all would be appreciated.

Have you tried scanning the source image? Disk Utility > Images menu > Scan Image for Restore…

Norton Internet Security cannot scan emails the use SSL. How do I insure that I do not get a virus or malware by opening an email in Thunderbird?

Norton Internet Security cannot scan emails the use SSL. How do I insure that I do not get a virus or malware by opening an email in Thunderbird? I have read that you don't have to click on a link to get malware but that some email can trigger malware just by opening and reading. Any suggestions to keep my emails from triggering malware? AOL Desktop software has it's own built-in email scanner but I'm trying to get away from using their software and rely just on TB.
Thanks

There are many aspects to this question.
First, using SSL or TLS to send and receive email is important because it prevents others from sniffing your email login. Particularly if you are using a device over wi-fi or on untrusted networks, this is critical because if others obtain your email login, bad things can happen.
Of course, using SSL or TLS with your mail server also protects the content of your email from being captured by others, so that's good too.
Second, you are correct that there can be security threats in email other than the attachments, although the attachments generally are the most dangerous. Your antivirus should protect you from bad attachments because in order to open them, they need to be written to disk in a temporary folder, and your AV software leaps into action whenever a new file is added to disk. You also can hedge your bets by using a two-step approach: first save the attachment to disk and only after it survives the real-time AV scan then launch it in the appropriate application.
Sometimes content in the message body can trigger a vulnerability in your email software or a plugin. As these vulnerabilities become known, Mozilla updates its software, but there seem to always be new issues discovered and there will never be perfect security. I'm not sure how helpful email scanning is for this problem.

Getting dollers that are not the inventory acct changes.

Hi fnds,
In my requirement. iam sending data to CMIS.but in that invtry_cost_paid field is not getting proper currency.here we are getting dollers( USD ).what i find out is getting dollers that are not the inventory acct changes.
In this code they did not use any convertion function module.
Then where we have to change the code.
by

use this FM at the right Spot.
CONVERT_TO_LOCAL_CURRENCY
CONVERT_TO_FOREIGN_CURRENCY
CALCULATE_EXCHANGE_RATE
READ_EXCHANGE_RATE
A

HT204135 Keep getting error "Could not load Print & Scan preference pane."

when I click on the prefpane i get "Could not load Print & Scan preference pane."
I have already tried to delete the files in my libary.
any help would be great!

Reinstall is overkill. (This isn't MS Windows, right?)
From:
https://discussions.apple.com/message/15721474#15721474
Open: Mac HD/System/Library/Core Services/Directory Utility
Click the lock to authenticate changes
Click on Directory Editor
Click to highlight any extra Guest accounts ("Guest1" "Guest2" etc.)
Delete them with the button, leaving only the standard "Guest" account.
Reboot
If symptom persists or Disk Utility is crashing, consider this fix:
Copy "PlatformHardwareManagement.framework" from another (working) machine and place it in the same directory on your own upgraded machine. (File also available on Snow Leopard OS 10.6 Macs.
OR
Use the program "Pacifist" to open the Mac OS X Snow Leopard Install DVD (10.6)
Manually pull out the PlatformHardwareManagement.framework and replace the copy on the hard disk.

Scanned image in Browser is not getting refreshed

Hi
We are facing a strange issue. We have scanned an invoice and this is stored in the R/# system. Now when the user clicks on a scanned image the user gets a scanned document that he has opened previous to this. Now once h closes this and again clicks then he gets the correct scanned image. This is being experienced by only a handful of users. I think it might be some Browser related issue. Can anyone throw some light how to solve this issue.
No experts on this topic
Any answer will be highly appreciable.
Thanks
Arghadip
Edited by: Arghadip Kar on Feb 28, 2008 9:03 AM

Hi,
In DC10 we define the document type and the default application to open that perticular documents. for ex document type images and default application type JPEG etc.
. now whenever you create any document with Doc type and attach the documents and after try to view the documents system will treat the originals as images of type JPEG and try to open with the workstation application like paint, image viewer
I hope your doubt clear abt dc10.
regards
shiv

Memory error on inventory scan

I've noticed that a few of our servers get this message in the console
after the daily inventory scan runs. Is this normal? Or does the cache
memory allocator need to be increased? if so how? Thanks
4-20-2006 6:04:42 am: SERVER-5.70-0 [nmID=6001D]
Cache memory allocator out of available memory.
4-20-2006 6:04:42 am: SERVER-5.70-0 [nmID=2000A]
Short term memory allocator is out of memory.
5 attempts to get more memory failed.
request size in bytes 278888448 from Module MPKSCAN.NLM

Ralph,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Workstation inventory scanning

hi
I am not able to perform workstations inventory scan in consoleone. But if
i run ZfdInvscanner.exe from c:\program files\novell\inventory, it worked.
When I right click the workstation object in consoleone, under properties,
Zenworks inventory, workstation scan configuration, I click on "Start Full
Scan", and It doesn't work for me. Can you please tell me what goes wrong
and how to make it work ... Thanks

In article <[email protected]>, [email protected] says...
> performing that action through ConsoleOne tells the inventory service
> "next time this workstation does an inventory scan, make it a full
> scan" - it doesn't tell it to go and scan that minute. control of when
> a scan takes place is via the inventory policy in the workstation
> policy package.
Check with wmsched.exe, you can force a run via that if you wish.
/Fribse
Barry (Sysop): "Then again, I'm a single CPU fan..."
Bob (Trafficshaper): "You can get a job cooling CPUs? Does it pay
well?"

544 Movement ,Qty & value is not getting updated in MC.9

Dear friends,
MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting G in OMJJ.
I require the info about MC.9 configuration or any info related to this.

Hi,
Please refer SAP note 581240 for this.
For these stocks you have three valuation types for selection:
' ' = no inventory valuation
'A' valuation = without reference to sales document ('make-to-stock
inventory')
'M' = separate valuation with reference to the sales and distribution
document/project
ONLY stock/stock movements with special stock valuation 'A'
(make-to-stock inventory) are updated in Inventory Controlling.
Thus, if you find a document which is not updated in the info structures
of Inventory Controlling (S031-S039) and you require this, check the
corresponding documents in the materials management tables. You can find
the special stock indicator and indicator of the valuation of the
special stock, for example, in document segment table MSEG in the
following fields:
MSEG-SOBKZ = Special Stock Indicator
MSEG-KZBWS = Indicator: Special Stock Valuation
Only A type (make to stock ) are updated in the info structures.
Hoping this helps.
Regards,
Rajesh.

Data is not getting replicating to the destination db.

I has set up streams replication on 2 databases running Oracle 10.1.0.2 on windows.
Steps for setting up one-way replication between two ORACLE databases using streams at schema level followed by the metalink doc
I entered a few few records in the source db, and the data is not getting replication to the destination db. Could you please guide me as to how do i analyse this problem to reach to the solution
setps for configuration _ steps followed by metalink doc.
==================
Set up ARCHIVELOG mode.
Set up the Streams administrator.
Set initialization parameters.
Create a database link.
Set up source and destination queues.
Set up supplemental logging at the source database.
Configure the capture process at the source database.
Configure the propagation process.
Create the destination table.
Grant object privileges.
Set the instantiation system change number (SCN).
Configure the apply process at the destination database.
Start the capture and apply processes.
Section 2 : Create user and grant privileges on both Source and Target
2.1 Create Streams Administrator :
connect SYS/password as SYSDBA
create user STRMADMIN identified by STRMADMIN;
2.2 Grant the necessary privileges to the Streams Administrator :
GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
In 10g :
GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
execute DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE('STRMADMIN');
2.3 Create streams queue :
connect STRMADMIN/STRMADMIN
BEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE(
queue_table => 'STREAMS_QUEUE_TABLE',
queue_name => 'STREAMS_QUEUE',
queue_user => 'STRMADMIN');
END;
Section 3 : Steps to be carried out at the Destination Database PLUTO
3.1 Add apply rules for the Schema at the destination database :
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name => 'SCOTT',
streams_type => 'APPLY ',
streams_name => 'STRMADMIN_APPLY',
queue_name => 'STRMADMIN.STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
3.2 Specify an 'APPLY USER' at the destination database:
This is the user who would apply all DML statements and DDL statements.
The user specified in the APPLY_USER parameter must have the necessary
privileges to perform DML and DDL changes on the apply objects.
BEGIN
DBMS_APPLY_ADM.ALTER_APPLY(
apply_name => 'STRMADMIN_APPLY',
apply_user => 'SCOTT');
END;
3.3 Start the Apply process :
DECLARE
v_started number;
BEGIN
SELECT decode(status, 'ENABLED', 1, 0) INTO v_started
FROM DBA_APPLY WHERE APPLY_NAME = 'STRMADMIN_APPLY';
if (v_started = 0) then
DBMS_APPLY_ADM.START_APPLY(apply_name => 'STRMADMIN_APPLY');
end if;
END;
Section 4 :Steps to be carried out at the Source Database REP2
4.1 Move LogMiner tables from SYSTEM tablespace:
By default, all LogMiner tables are created in the SYSTEM tablespace.
It is a good practice to create an alternate tablespace for the LogMiner
tables.
CREATE TABLESPACE LOGMNRTS DATAFILE 'logmnrts.dbf' SIZE 25M AUTOEXTEND ON
MAXSIZE UNLIMITED;
BEGIN
DBMS_LOGMNR_D.SET_TABLESPACE('LOGMNRTS');
END;
4.2 Turn on supplemental logging for DEPT and EMPLOYEES table :
connect SYS/password as SYSDBA
ALTER TABLE scott.dept ADD SUPPLEMENTAL LOG GROUP dept_pk(deptno) ALWAYS;
ALTER TABLE scott.EMPLOYEES ADD SUPPLEMENTAL LOG GROUP dep_pk(empno) ALWAYS;
Note: If the number of tables are more the supplemental logging can be
set at database level .
4.3 Create a database link to the destination database :
connect STRMADMIN/STRMADMIN
CREATE DATABASE LINK PLUTO connect to
STRMADMIN identified by STRMADMIN using 'PLUTO';
Test the database link to be working properly by querying against the
destination database.
Eg : select * from global_name@PLUTO;
4.4 Add capture rules for the schema SCOTT at the source database:
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name => 'SCOTT',
streams_type => 'CAPTURE',
streams_name => 'STREAM_CAPTURE',
queue_name => 'STRMADMIN.STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
4.5 Add propagation rules for the schema SCOTT at the source database.
This step will also create a propagation job to the destination database.
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_PROPAGATION_RULES(
schema_name => 'SCOTT',
streams_name => 'STREAM_PROPAGATE',
source_queue_name => 'STRMADMIN.STREAMS_QUEUE',
destination_queue_name => 'STRMADMIN.STREAMS_QUEUE@PLUTO',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
Section 5 : Export, import and instantiation of tables from
Source to Destination Database
5.1 If the objects are not present in the destination database, perform
an export of the objects from the source database and import them
into the destination database
Export from the Source Database:
Specify the OBJECT_CONSISTENT=Y clause on the export command.
By doing this, an export is performed that is consistent for each
individual object at a particular system change number (SCN).
exp USERID=SYSTEM/manager@rep2 OWNER=SCOTT FILE=scott.dmp
LOG=exportTables.log OBJECT_CONSISTENT=Y STATISTICS = NONE
Import into the Destination Database:
Specify STREAMS_INSTANTIATION=Y clause in the import command.
By doing this, the streams metadata is updated with the appropriate
information in the destination database corresponding to the SCN that
is recorded in the export file.
imp USERID=SYSTEM@pluto FULL=Y CONSTRAINTS=Y FILE=scott.dmp IGNORE=Y
COMMIT=Y LOG=importTables.log STREAMS_INSTANTIATION=Y
5.2 If the objects are already present in the desination database, there
are two ways of instanitating the objects at the destination site.
1. By means of Metadata-only export/import :
Specify ROWS=N during Export
Specify IGNORE=Y during Import along with above import parameters.
2. By Manaually instantiating the objects
Get the Instantiation SCN at the source database:
connect STRMADMIN/STRMADMIN@source
set serveroutput on
DECLARE
iscn NUMBER; -- Variable to hold instantiation SCN value
BEGIN
iscn := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
DBMS_OUTPUT.PUT_LINE ('Instantiation SCN is: ' || iscn);
END;
Instantiate the objects at the destination database with
this SCN value. The SET_TABLE_INSTANTIATION_SCN procedure
controls which LCRs for a table are to be applied by the
apply process. If the commit SCN of an LCR from the source
database is less than or equal to this instantiation SCN,
then the apply process discards the LCR. Else, the apply
process applies the LCR.
connect STRMADMIN/STRMADMIN@destination
BEGIN
DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN(
SOURCE_SCHEMA_NAME => 'SCOTT',
source_database_name => 'REP2',
instantiation_scn => &iscn );
END;
Enter value for iscn:
<Provide the value of SCN that you got from the source database>
Note:In 9i, you must instantiate each table individually.
In 10g recursive=true parameter of DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN
is used for instantiation...
Section 6 : Start the Capture process
begin
DBMS_CAPTURE_ADM.START_CAPTURE(capture_name => 'STREAM_CAPTURE');
end;
/

same problem, data not replicated.
its captured,propagated from source,but not applied.
also no apply errors in DBA_APPLY_ERROR. Looks like the problem is that LCRs propagated from source db do not reach target queue.can i get any help on this?
queried results are as under:
1.at source(capture process)
Capture Session Total
Process Session Serial Redo Entries LCRs
Number ID Number State Scanned Enqueued
CP01 16 7 CAPTURING CHANGES 1010143 72
2. data propagated from source
Total Time Executing
in Seconds Total Events Propagated Total Bytes Propagated
7 13 6731
3. Apply at target(nothing is applied)
Coordinator Session Total Total Total
Process Session Serial Trans Trans Apply
Name ID Number State Received Applied Errors
A001 154 33 APPLYING 0 0 0
4. At target:(nothing in buffer)
Total Captured LCRs
Queue Owner Queue Name LCRs in Memory Spilled LCRs in Buffered Queue
STRMADMIN STREAMS_QUEUE 0 0 0

PO Vendor Email ID is not getting updated in PO Output Tab

Hello Experts,
We are facing any issue with the PO vendor email id.
Scenario: While creating the PO, we are mapping the vendor address (Like, Email, phone no, fax no .)From shopping cart which are custom fields of shopping cart.
And these address details getting flowing to PO while creating PO.
And we can see the updated address in partner details for the vendor.
But the issue is coming as, this email id and fax no has get update in the PO Output tab also. This is not working for only email id, where as fax no id getting updated in the PO Output tab.
Can you please check this and provide us a solution for this issue. Why only the email is not getting updated.
I noticed that, there is FM module which gets address details of the vendor BBP_OUTPUT_PO_PARAMS_GET from the memory which is not getting the correct details
Seeking your help.
We will appreciate if somebody can provide us solution for this issue.
Thank you,
Bharathi.
Edited by: Latha V on Feb 11, 2009 10:01 AM

Hi check follwoing
1. Set Delivery complete indicator at plant leve
spro - mm --inventory mgmt ---Goods receipt --- Set delivery complete indicator
2. Control field selection for MIGO to disable users from changing it.
spro -- Materials Mgmt -->Inventory Mgmt -- Settings for enjoy Transaction -->Field Selection for MIGO
and chek this link
["Delivery Completed" Indicator
Regards
Kailas Ugale

Deliver completed indicator is not getting updated in the PO item Overview

Hi Gurus,
We have the PO with quantity of 10 and it has been GR/IR, but the Delivery completed indicator is not getting updated (Checked).
The deliver completed indicator is selected in the config of t-code OMCD.
Also there is no tolerance limit is maintained.
Could you please suggest us why the indicator is not getting updating.
Thanks & Regards,
Sada

Hi check follwoing
1. Set Delivery complete indicator at plant leve
spro - mm --inventory mgmt ---Goods receipt --- Set delivery complete indicator
2. Control field selection for MIGO to disable users from changing it.
spro -- Materials Mgmt -->Inventory Mgmt -- Settings for enjoy Transaction -->Field Selection for MIGO
and chek this link
["Delivery Completed" Indicator
Regards
Kailas Ugale

Win98 not getting inventory scan

Similar Messages

Maybe you are looking for