Win98SE/Zen Touch probl

Can anyone help me with this :- I'm using the above O/S & player, all works OK with supplied software etc. - the only problem is disconnecting the player from USB port, causes the computer to lock up, and 'explorer' shuts down. With other USB devices I have, you have to tell the computer you are disconnecting the device, either through the supplied software, or an icon on taskbar. With the Zen touch software, there seems to be no provision for this, and mentions nothing in user manual or software help about how to disconnect player from USB port (Win 98 is not 'hot pluggable').........am I missing something? - ThanksMessage Edited by Koolstup on 06-6-2005 05:25 PM

I've had the same problem.... I tried to reinstall everything firmware and drivers and all that but it did'nt work.... you can try that and if that does'nt work you should return it and get a new one... It's a really good player when it's working but when it's not working it's crap

Similar Messages

  • Big Zen Touch Probl

    I recieved my Zen Touch yesterday, charged it etc. I also tested the classical tracks. Then went about transferring files from my Nomad Zen NX to the Touch. I got through around half in the time I had, then disconnected and turned off the players. Today though I plugged both in and neither responded, so i unplugged them and redid it. Then I started transferring the remaining files, but they woukd not write onto the Touch. I then looked at the touch and the screen was blank, only the blue backlight. So i reset the player, the Creative screen was displayed and the Zen one but the background was very dark, after though the screen was again blank although you could here the clicking of the touch pad. I then tried to turn it off, but it wasn't responsi've so didn't work. I went into the Recovery mode and this screen was displayed so I turned it off. I then tried again to boot it up but the problem remained. So i went into recovery mode and have tried all the options but none seem to work as the screen goes blank. I have reinstalled the firmware, and after doing so went to MediaSource (Touch was empty as I had Formatted the player before) and put an album on so the transfer of file works and the PC recognises the player. The problem remains though of a blank screen and the inablity to do anything at this point. The only way to turn off is via Recovery Mode.
    Any help would be very grateful, as my patience is wearing thin and soon the Zen Touch may be falling 5' from the window to the floor!!
    Cheers

    If the Rescue Mode functions aren't working then unfortunately the player is faulty. You either need to return it where you bought it for a replacement, or contact Creative Support.

  • Creative Zen Touch Proble

    My Zen Touch won't turn on. I thought it had a low battery, so I hooked it up to the charger, but the usual little battery in the upper corner of the screen didn't show up. It won't turn on and when hooked up to the computer, it isn't detected. But the little blue power light is on and I can't shut it off. Any ideas?

    I tried resetting it. But now the blue light went off and it won't turn on either. When I hold down the power button as if I'm trying to turn it on, the blue light blinks three times. Now what... =[ Help would be appreciated.

  • Searched but didnt find answer: Zen Touch probl

    I have a 20GB Zen Touch and randomly it just changes the mode to 'shuffle' without pressing the key and I lose my playlist, its reallly annoying :robotsad:
    It was bought in 2005, end of March or begining of April.
    Can I still send it back to Creative for it to be fixed or is there a thing I can do?
    Been happening for ages.
    I think I can send it back, right? Because my friend had an original black and white iPod (he bought it like 2 months after release) , send it back coz the wheel broke and he got a new one or a Video one
    Thanks
    Please reply :manhappy:

    The firmware was successful. I just tried docking the player again. This time the computer didn't recognize the player. It seems to vary. Sometimes a message will open "Creative Zen Connected" or something like that.
    But this time, nothing happened. I Opened WMP and it said "No player connected"? even though the player said "Docked" I have tried opening the player to view the files - which is an option that Vista gives when it does recognize the player - and waited about 5 minutes while it tried to open the files? - then it stopped responding. This has also happened with Real Player. If I try to sync, transfer or view the files - the program will stop responding.

  • Zen touch probl

    I have backed up all the audio and data
    files i need onto my computer and wanted to install the playforsure
    firmware upgrade. When i started to install it everything went fine
    until it got stuck on rebooting mp3 when the mp3 was done rebooting and the program just froze.Because of this I closed the upgrade. Now when i turn my mp3 player on
    all i see is recovery mode. I also cannot install another fireware on my
    mp3 player or reinstall the playforsure one. It says no player is
    connected. I dont know what to do?
    thx
    Koss

    Hi Koss,
    Glad to hear it!
    On the other PC, does it meet all the requirements aswell? For instance does it have WinXP with SP2? Did you install any USB updates or system updates on it's
    Does the player work on that (original) PC now?
    Cat

  • Zen Touch sync and display probl

    I left my Touch connected to my PC with WM0 running to convert and transfer tracks to the Touch. When I came back a few hours later the transfer had stopped - incomplete with and error message (didn't make a note of it ).
    Now my it is not recognised by my PC. When I plug the USB lead in it is seen and the option window comes up. I click on the sync option and WM fires up but says that it can't find a player atteached. The Touch screen shows that it is docked.
    I can't see the player as an external dri've either.
    When I play anything on the Touch I can get as far as choosing tracks but as soon as I hit the play button the screen is different from normal. Instread of showing the track details all I get is a notice to "Add music from Library"
    I have tried a reset, and rescue mode but they have not helped.
    Can anyone give me any advice?
    Zen Touch 40gb, Version 2..0
    Track count 380.
    (Showing 22gb free - but I think that's wrong)

    Got it working again.
    Did a reset and formated the dri've - lost my music though

  • Zen Touch first-charge probl

    Hello,
    I have received a Zen Touch, and I plugged it in to charge it for the first time, but no battery meter appears to tell me how it is charging. When I turn it on while it is plugged in, the icon at the upper left is the plug only, which means that it is simply running off of external power...nothing about it being charged. Any help would be appreciated, maybe some of you have suggestions or stories about your first charge. The player works fine when it is plugged in, but it doesn't appear to be charging.

    If your battery isn't charging you should first try resetting the player. If this doesn't help then try running a disk cleanup. For the Zen Touch: To access the Rescue Mode hold down the play button and KEEP it held down, press the tiny reset switch once, and KEEP the play button held down until the player boots into the Rescue Mode. Choose Disk Cleanup from the menu. For the Zen Micro: To access the Rescue Mode on the Zen Micro, remove the battery, hold the power switch to the "on" position, reinsert the battery. Choose Disk Cleanup from the menu.
    If this still doesn't help then connect the transformer to the wall socket, and the Zen to the transformer. Then turn the wall socket switch on and off several times. The power spike *might* jump the charging circuit.
    If this still doesn't help then contact Customer Support.

  • My Zen Touch plays some of my Mp3's in slow motion (they play fine on my PC), what's the probl

    I don't know how to explain it other than it sounds like it's playing in slow motion or at half speed, is this a problem with the Zen Touch or with the mp3's? The mp3's play fine on my PC so I'm thinking it has to be the Zen. Any suggestions?

    See the section "My tracks don't play at the correct speed e.g. they play too slowly, why?" in the FAQ post.

  • Zen Touch 40 gig Transfer Probl

    Hey everyone, I know there are a lot of posts similar to this, but I can't find exactly what I'm looking for. I have had my Zen Touch for under a month now. Everything was working fine until I got up around 800 songs and I got a message telling me that the player was either busy or not connected. I couldn't add any more songs to it. This was very frustrating, but at the time, I didn't feel like fooling with it. I came back to it a week later, and found that I could add songs just fine. I added a few hundred more, and then a new message came up: "Unable to create file. Restart player and try again." I can't get anything to work. When I start the Mediasource Organizer, it reads my Zen just fine and is able to show its library. After I shut down the organizer, the Zen still shows that it is docked. It used to go back to the normal player screen when I shut down the organizer. I think it may be frozen now.
    This seems to be a very common problem for these Zens. I've already tried several approaches to try to fix them. One common fix seems to be to shut down all background programs. This did not do anything for me. I would like to add that if at all possible, I don't won't to lose my music files that are already on the Zen. Not only did it take a huge amount of time to put 2000+ songs on it, but I do not have backup files of some of the files. Thanks so much.
    Ryan

    I would also like to point out that when I get these error messages and my Zen freezes, I can't shut down my computer properly. When I try to shut down, I get the message "CTPdesrv.event.handler.window" is not responding. Click end now to terminate..." Even when I choose to end now, it doesn't really do anything. My computer just continues to sit there, not shutting down. I'm forced to shut down with the button.

  • Thank you for guidance on Zen Touch power failure probl

    Hi
    Just wanted to say thanks for the help i found here when my Zen Touch's power button was lit but nothing was on the screen and it wasn't responding to anything i did!
    I was literally really freaking out that all my music would be gone and i'd have to buy a new one (really can't afford to) when i thought to try online and see if anyone else had had this problem and found some people had and that they'd pressed the reset button with a paperclip and that it had solved it - with breath held, i tried this and it worked so thank you all very much - Phew x4000!!
    LisaMessage Edited by lisamclisa on 03-24-200605:4 PM

    Ouch, very unfortunate timing for a PC crash/freeze.
    If the player won't even go into Rescue Mode at all, then there is little else you can try. It would be best to contact Customer Support anyway to see what they advise, and to see if there's anything they can do to assist you.
    Cat

  • Zen Touch + P4S = only proble

    I have upgraded my Zen Touch (40GB) with firmware PlaysForSure and so far I have only problems:
    )I made back-up from Nomad Explorer, which I used before, but it stores only song without folders. Now I want to import theese songs to Zen. Do I have to create folders manually and search for long hours which song is from which album? Or is there an easier sollution?!
    2)Is it impossible to copy/move songs between folders in Zen Touch? I think so...
    3)And finally my Zen Touch with P4S software was not recognized at my friend?s notebook despite she has Windows XP (SP2) and Media Player 0. "With P4S you don?t need any other software" is written on Creative web page.
    Do you have the same problems? Can you help me with this? Thank you, Jan

    Can you try loading the firmware from another PC? It is possible there is a (hardware) problem with the unit though.
    Cat

  • Zen touch intermittent transfer probl

    Hi, just bought a 20gb Zen touch, and I am getting errors when transfering mp3's via Media Source.
    I have installed the latest firmware and drivers. It seems to transfer between 800-000 files ok then errors with "Player either not connected or busy - please try later" I have reset the player, formatted the dri've, in fact tried everything in the rescue menu. I have also loaded the software on my laptop and get the same
    problem. Do I have a faulty Zen? Cheers.

    If you were the only person to encounter it then I would say you had a faulty Zen, but others have had it with other players also. There's lots of connection troubleshooting advice here in the Zen FAQ at Nomadness.net, some of it relevant and some of it not.
    I would personally buy a known good USB card for the desktop PC i.e. Belkin or Adaptec, and see if that solves it. It's not a particularly great solution, but it will tell you straight away if the issue is the USB chipset. Try and buy the card somewhere you can return it if it doesn't help.

  • Zen Touch 20G Power Probl

    About two weeks ago I purchased my Zen Touch mp3 player to replace my iPod mini. On lunch from work today, it suddenly powered off when I went to push the <- (Back) button, with a sharp clicking sound through the headphones. When I went to power it up, it came up, but as soon as I pushed the 'Menu' button, it did the same thing (clicking sound and all). Now it's not powering up, at all. The power button isn't lit, and it was at full battery at the time this occured. Any ideas ?

    Nikko,
    Aside from what brotsalami mentioned (which is a very important point), check out this knowledgebase case for more ti
    ps.
    Cat

  • Zen Touch has connection probl

    Hello,
    I have my Zen Touch for about a month now, great thing, but now I have a irritating problem. Everytime I connect my Zen with the USB cable, and I want to open 'this computer' it doesnt do anything, except for showing the little flashlight
    http://img474.imageshack.us/img474/650/flash7qn.jpg
    When I open 'creative mediasource organizer', click on 'import tracks', then 'this computer' wont open also. Can anyone help me because on this way I cant do import songs to my Zen anymore.
    best regards,
    bram

    No bother!
    Connect your player up to the power source, as if you were going to charge it. Make sure it is turned off! There's a wee hole on the side of the player, near the 'random' button. Push a paper clip down that and hold the 'play button until the screen wakes up. You should now be in recovery mode. Now scroll down to 'clean up' and there you have it! It doesn't take too long. When you connect it up to the computer next, it should update the library information- just click on my computer when it's back to normal and you *should* be ok...

  • So what now? (zen touch firmware probl

    please please take your time and listen to me I am really goin mad right now as I have no idea about what to do :s
    as I was having problems using my zen touch 40gb on my vista laptop, I decided to update my firmware after having read many posts, including creative knowledge base notes, that I "must" update my firmware to use my player on vista.
    so I plug my player to a desktop pc with xp installed, and downloaded the required file to update the firmware.
    BUT it froze for a few mins till I unplugged it. it was taking forever with no progress.
    and after that when player is plugged on the pc it shows creative 0.0.000 or something like that.
    I realized I had wm installed, so decided to try the things written here which are also shared on many posts of this forum.
    well, later on that caused a much bigger problem, the pc wouldnt work properly.
    anyways, later I got it back to an older date. and at least the pc is ok.
    NOW, is there anyone who has any idea about what to do
    - all my data on the player is gone.
    - no firmware on on the player except for v0.0.000
    - the player is either detected or not; the pc gives only the message like "new device found", "creative zen ready", "new mtp device" or something like those..
    - everytime I try to switch it on it says "firmware problem", and goes to the recovery mode.
    PLEASE PLEASE HELP ME!

    i have ran into the same problem. Does anyone have an answer for this? Thank you for your response.

Maybe you are looking for