Wince 6.0 image for software mfgtool

HI,
My problem is download the wince 6.0 image with the software Freescale Mfgtool .
But if I download the wince image with the platfom builder, then download the wince image with Mfgtool.
The download is OK.
The Software mfgtool download the wince image format NK.nb0, then platform buider format NK.bin

What is the problem? Does something fail? If so, what and what do you see as the failure?
Since this has something to do with a Freescale tool, have you asked Freescale, or in a Freescale forum?
Bruce Eitman (eMVP) Senior Engineer Bruce.Eitman AT Eurotech DOT com My BLOG http://geekswithblogs.net/bruceeitman Eurotech Inc. www.Eurotech.com

Similar Messages

Creating a disk image for software installation

Hello all,
I'm having a problem with my iMac not reading my family pack OSX Tiger install DVD... although it worked fine on my other three macs. Someone said that I could "create a mirror image of the DVD to my desktop on another mac and then copy that to an ipod. Then use the ipod to boot up the imac and install Tiger".
Can anyone explain to me how to do that? IE... how to create a mirror image of the DVD so I can try the ipod fix?
Any help would be appreciated.
Matt

Matt, I may have a solution for you.
I was stumped by this and wanted to see if I could figure it out, so I was Googling around and ran into this. It is the very first post and details the process of how someone else used an iPod to install Tiger from DVD to a Mac that did not have a DVD drive.
If this gets deleted, please email me directly at my public address on my profile and I will send you the link again.

Software Image for c3745 for MPLS/Multicast Test Lab

Looking to find an IOS Image for a c3745 that will support the "address-family ipv4 mdt" under BGP for Multicast. Can anybody assist me here. I have tried the Software Advisor without any success.
Thanks
Derek

Derek,
Sorry, I had read 3750. It is available starting with 12.4(20)T for the 3745.
Regards

Suggestions for Image montage software needed

Hi,
I am in need of come cool image montage software that can handle a few hundred images. I have checked out Core Melt's ImageFlow (fx) and while that is ok, it isn't as dynamic as I would like. For 99 bucks, there are only one or two of their styles that I think are ok. I am looking for something more original, could be 3D or not.
Any and all suggestions would be helpful.
thanks
ari

yeah, sure I could do it myself, but literally I have nearly 1000 photos and even though I could batch some stuff, either in AE or FCP, (or motion, actually) I don't have the time. Core melt's deal is simply point to a folder of pics, real time rendering, set the temp and go. Done in as long as it takes to render the movie out to a non self contained file, then compressed to a m2v.
no worries.
thanks for the help

When is there going to be an update for HP Image Zone software for Win 7. NEED IT!

When is there going to be an update for Image Zone software. for Win 7 64 bit. I am totally frustrated with the current HP software because it does not allow changes in size of photos. It wastes a lot of the very pricey photo paper and it is not comparable to the product I had when I purchased my HP 8750. I want to have a professional quality printer for photos and professional abilities when using my very expensive printer with my brand new HP Pavilion laptop. If HP does not plan on making an update for it, will you please send software that has some of the same abilities. Adjusting and using custom sizes to print pictures. I would like to just print pictures, not have all of the pretty frames, albums, scrapbook pages, etc. I just want to print my pictures in sizes I WANT using the most efficient use of space on a piece of premium photo paper. Believe me I have spent several thousands of dollars on HP products and would like my loyalty acknowledged with a simple update!
Thank you very much.
A disgruntled customer.
Laura Lee

Hi Laura.
We're constantly improving HP Photo Creations and we welcome constructive suggestions. Can you provide more detail on the features you want and how you would use them?
Thank you,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Looking for software or a service with which I can create a personalized photo calendar

I am looking for software or a service with which I can create a personalized photo calendar. Any recommendations?
Jerry

Thanks for the reply.
iPhoto, unfortunately, has some real problems in my opinion. Control over image placement and size is limited. This is compounded by the fact that Apple has not made the job any easier by refusing to publish information such as recommended aspect ratios and pixel sizes of images used to create a calendar. Obviously, these both change as the page layouts change. But, I don't think it is too much to ask that Apple supply image aspect ratios for each frame size, 2:3, 3:4, 1:1, or something else. What pixel sizes are required for each frame size/aspect? It is impossible to place 2 photos (or 1 photo and a name) on one date should 2 birthdays fall on one day.
Further, there is no recommendation for color space to be used by the printer.
I am tired of trying out a photo in the calendar only to find it looks bad at the pixel size and aspect I chose, then have to go back to the original, re-crop, resize, and wrestle with bringing it back to iPhoto. (I use Aperture to organize my images.)
I must also add that I had a very bad experience with an iPhoto book earlier this year. Don't know if Apple has fixed the problems as I refuse to invest another 20 hours of time and more then $150.00 to find out.
I am seriously looking for something to replace iPhoto (unless changes are made) to do the 10 or 15 calendars for my family again this year (and possibly redo my book).
Jerry

How do you delete entire folders of pictures in the image editing software instead of one at a time!

Don't know how I did it, but I imported 11,000 pictures into the new image editing software - none of which I took with my new powershot sx50 hs. I can only delete the ONE AT A TIME - HELP!! Anyway to delete entire folders?

Thank you for your reply. I did not get an 'advanced guide' on the CD... I just got 89 page user guide.
About deleting, you can not select multiple pics (by holding control key). You can only delete ONE at a time. I don't have time to delete 11, 137 pictures.
OH MY! Love the camera but paid too much for it not to be able to use the software. Thanks again.

Windows 7 and HP Image Zone software

I have a new Pavilion s5212y w/Windows 7 and an HP Photosmart 8450 printer that comes with HP Image Zone software for editing pictures. The software isn't supported by Win 7, won't install (tells me to upgrade op-sys). Is there a work around for this or will the software be made compatible with the new system? Don't misunderstand, the printer works fine, it's just that I can't use the software to edit pictures before printing. Thanks.

I just bought a used HP Officejet 5610 The situation was that I had a new Windows 7 machine that no longer worked with my old nice Canon scanner and my HP 5550 printer had broken cradles so I bought a used HP Officejet 5610 and was able to save/refill the color cartridge from that and I had a working black cartridge from my 5550 that worked with the 5610. On the whole, I am stoked-- it works well. The new old machine has a much better cradle design than the old old machine, but I still miss my OmniPage OCR software that came with my old Canon Scanner and will not work with Win 7 and Ominipage costs more new than I paid for my scanner in the first place, like 150 bucks. I too have been looking for cheap OCR ware again. I am told there is a small OCR applet that comes with Microsoft office that works well with tiff files only. So if you already have Microsoft Office you already own it. I'll try the Picaso software from google I guess. The fax and scan software that comes with Win 7 works with my scanner, but only produces low res jpg files. I understand that my 5610 likes working with Adobe Photoshop. I have copy of Photoshop Elements that hopefully will work with Win 7. I will also try that. thanks folks.

Disk Utility - Scan Image for Restore - Freeze

I backed up my wife's iBook by starting her computer in target disk to my iBook which has a huge external attached. After about an hour, the image process was complete. Apple disk utility help says next to scan image for restore (not too sure why because I'm not restoring anything unless her drive dies). I begin the scan image for restore and get the progress bar that never shows and progress. Just keeps spinning/scanning for hours and I have no option to shut if off. Can't move external to trash because it in use, etc.
Does this mean the original disk image may be bad? Do over?
I'm using Disk Image as a solution for a total disk backup if a drive fails. No messing around with reconfiguring apps, etc. (i.e. plug and play) Is this the best way to do this?
I come from the Mac Plus days. Hopefully I can contribute to the new OS discussions at some point. Thank you much!

What format is the external drive?
Is it Firewire or USB?
Does the external drive have one of those front button touch things, like a My Book?
I'm using Disk Image as a solution for a total disk backup if a drive fails. No messing around with reconfiguring apps, etc. (i.e. plug and play) Is this the best way to do this?
I prefer a Clone myself.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Have a look at Synchronize! Pro X 6.0.5
http://www.macupdate.com/info.php/id/6897/synchronize!-pro-x
Or the most expensive one & my favorite, ...
http://www.tri-edre.com/english/tribackup.html
Does this mean the original disk image may be bad? Do over?
It can take quite awhile, and the progress bar isn't accurate at all, but it sounds like something is wrong.

Don't want new tiff files saved in my catologue if I'm only using the image for a composite.

When editing in Photoshop CS4 from LR3, the new tif will not appear in the catalogue unless I save it in PS. In LR4 it saves a new tiff in my catalogue regardless if I save the edited image in PS or not. I have a cloud library I use often and do not want new files saved in my LR catologue if I'm only using the opened image for compositing. Can anyone help me figure out how to change the workflow to be like LR3?

-Agfaclack- wrote:
i think adobe should support new cameras for older CS versions too.
in the end PS is expensive enough to justifie a better support.
How far back would you go? One version? Three? Where should the line be drawn? Adobe draws the line at the currently shipping version...it's now CS5 and shortly it will be CS6.
Even if Adobe were to do this, you do realize that trying to put new plug-ins into older software is really tough. For example on the Mac, Photoshop CS5 requires that the plug-in be written in Apple's Cocoa API. Camera Raw 5 required a major update to be able to run in Cocoa...retrofitting Camera Raw 5 to run in a PPC platform (supported by CS3/CS4 but not supported by CS5) would be difficult–a lot of work for zero return. As a result of the engineering challenges of backwards compatibility Adobe has the policy of only updating currently shipping software to current customers. Truth be told, if you don't have the most recent version, you are not a current customer...you are a former customer. Having Adobe spend R&D engineering backwards compatibility to support former customers would take resources away from supporting current customers. As a current customer, I wouldn't like that.
But it's all a moot point because I don't see any evidence that Adobe is going to change this policy for backwards compatibility. In fact, going forward, Adobe is already announced the change to Photoshop upgrade rules allowing only the most recent version to be upgraded to the new version. Because of the reaction that only CS5/5.5 could upgrade to CS6, Adobe blinked and now has given a grace period till the end of 2012 for CS3 & CS4 users to upgrade to CS6.
Again many people don't like this, but as a pro user of Photoshop, I always upgrade anyway so it has no impact on me. Yes, it will bite some people and I can have sympathy, but again, you always have the free DNG Converter to use in the case you need new camera support. And hey, the new cameras come with software to process their raw files, right?

Best project sizing strategy for software tutorials when UI is 1024w or over?

Hi,
I've read many of the discussions on the forum related to project size, but am still wondering about this.
I'm creating e-learning modules for software where the required minium resoultion is 1024x768 (but in practice most users have wider displays). In the past I would use a project size of around 965w (as RodWard suggests in his helpful blog post ) and then either downsize the images a little to fit, or do some panning in the project when necessary. I've also used zoom areas a little, but these add considerable labor for the benefit IMO.
My quandary is, while I've always designed my Captivate projects to match the software UI size as closely as possible, I'm wondering if user expectations about this are changing. There are umpteen software 'how to' videos on Youtube and elsewhere set at around 640W (or smaller) and though the screen shots are inevitably blurry, I'm not hearing a lot of complaints. Since one of my goals is to extract the "screencast" portions of my tutorials and publish them as MP4 videos (for mobile delivery, right?) I am wondering if I should not just set my project size smaller and live with the blurry screens, using zoom areas in places where detail is absolutely essential.
Thoughts, opinions and lively discussion welcome!
Corbin

Personally, I would never settle for blurry images of any tutorial I create. If we're creating a tutorial for output to YouTube video, we now use the HD format size, 1280x720. If there is any way you can use that, go for it. Alternatively, go for YouTube XGA format at 1024x768. Anything is better than 640.
The only way I've seen tutorials work at 640 size is when making heavy use of Panning to follow the cursor around the screen. However, I don't personally like this method because I find it disorienting. It's like watching a screencast through a keyhole.

I hired a commercial artist to create a color image for the cover of a self published book. I want a black and white image for the inside. The commercial artist has not responded to this request. How do I determine the format of the color image, I'm guess

I hired a commercial artist to create a color image for the cover of a self published book. I want a black and white image for the inside. The commercial artist has not responded to this request. How do I determine the format of the color image, I'm guessing it's Illustrator's formatting but I don't know. How can I find out if Illustrator will open the file and allow alterations? The image opens only in Apple's Pages software?

rons,
It seems that all you have is a raster image, presumable PNG24 or JPEG, in RGB.
It may have been created as raster artwork in Photoshop, or it may have been created as vector artwork with the help of Illy, or as a mixture of vector and raster artwork in either application, or both combined.
If you just need to have a raster representation in black and white based on the current colour image, you may try this, in a new RGB document (View>Smart Guides are your friends):
1) File>Place the image (you may tick Link or untick and have it embedded);
2) Create a rectangle with black fill (R = G = B = 0), at least as large as the image, and place it behind the image (you may ClickDrag with the Rectangle Tool between opposite corners, then Ctrl/Cmd+X+B);
3) Select all and in the Transparnecy palette flyout click Make Opacity Mask with both Clip and Invert Mask ticked.

Building an image for multiple types of Macs...

I need to build images for iMac G3 500's, iMac G4's, eMacs, & 400 Mhz G4 Towers. My question is this...
Using OS 10.3 or 10.4, can I build an image on one of these machines that will have all of the appropriate drivers, software, etc. to distribute to all of them? Or... are there specific items installed during the OS install for some machines and not others?

Contradictory evidence exists whether or not you can really build one unique image for use for all of those machines. One interesting factor here is you say 10.3 or 10.4. Those operating systems can not really be run from one image simultaneously.
In addition, some G4 400 Mhz towers are incapable of target disk mode or being used as the source for a migration assistant transfer. These two articles tell you which those are:
http://docs.info.apple.com/article.html?artnum=58583
http://docs.info.apple.com/article.html?artnum=58418
Assuming you have license for Mac OS X for all the machines there, I suggest building a by model base of a partition you can import to each machine from several external hard drives.
The migration assistant after installing Mac OS X on a specific machine can help simplify how many partitions you need to create:
http://docs.info.apple.com/article.html?artnum=25773
You just install the operating system and it will import data using the migration assistant.
Now the migration assistant will import data from a 10.3 machine to a 10.4 machine, but you can't do vice versa.

Scan Image for Restore?

I created a disk image last night to prepare for my upgrade to Snow Leopard and then this morning moved to the final step of "Scan Image for Restore" and I was wondering if anyone had any insights into how long this would take. It's been running for about an hour now and the progress bar doesn't show any progress, just shows the fast moving blue hashes in the bar. Is this normal, or is it possibly hung up on something? Note, the light on my external drive continues to blink, which makes me think it is doing something, just not sure if it is progressing and this just takes several hours, or if something is wrong. Any help is appreciated.

It can take a very long time, depending on size of the Image, and even slower via USB.
I think a much faster, better, more useful method is to clone your drive, then you'll have a bootable version of exactly what you have now.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/

I can´t rescan for software updates with wmic command

Hi guys,
I read in all the sites that to install all updates I need to run a command, but when I try to scan for software updates both a OSD task as from a command line on a machine with installed client gives me an error: Modifier Verb is invalid. Anyone know
why? Is there any requirement to launch this command?
Command: WMIC /namespace:\\root\ccm path sms_client CALL TriggerSchedule "{00000000-0000-0000-0000-000000000113}"
/NOINTERACTIVE
Sccm 2012 SP1 with SQL Server 2012 and Windows Server 2012. All in spanish. Reference OS is Windows 7 x64.
THX for all!!!

Hi,
Please review the link below, here is a useful article for you.
Configuration Manager 2012: Offline Servicing for Operating System Images
http://blogs.technet.com/b/inside_osd/archive/2011/04/18/configuration-manager-2012-offline-servicing-for-operating-system-images.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Wince 6.0 image for software mfgtool

Similar Messages

Maybe you are looking for