Wind 7 after importing, pics not appearing under My Pictures in left panel
but rather as separate folders above My Pictures. I'm new to windows 7 and never had this problem with XP. i have double checked as to where exactly i'm importing to but it doesn't make a difference.
when i "show in explorer" the folder is there but it does not appear along with all the other folders under My Pictures in left panel.
one hour on the phone with a dell tech who could not figure it out. neither he nor i were observant enough to scroll down and see that prompt.
we right clicked the my pictures folder several times. i was certain that updating was akin to e=mc2. just before i was about to end the session i checked back here and both he and i had a good chuckle. this particular problem solved.
geoff, many thanks.
harvey
Similar Messages
-
After importing Pics in iMovie just black picture
I have a funny "effect" in iMovie. I have tried to import pictures from iPhoto and it works fine as far as I do not apply the Kern Burns effect. If the later is applied, I can see the preview but as far as the effect is completely calculated (red bar bellow the pic is ready) I get just a black picture. The pic seems to have disappeared. However I can still see it if I go to "preview". The black picture has the correct duration but nothing as black is shown...
any idea? Its a bug ...or a feature ? (;-)
AlexI have tried to
import pictures from iPhoto and it works fine as far
as I do not apply the Kern Burns effect. If the later
is applied, I can see the preview but as far as the
effect is completely calculated (red bar bellow the
pic is ready) I get just a black picture. The pic
seems to have disappeared. However I can still see it
if I go to "preview".
Alex, is the iMovie project stored on an external drive? If it is, iMovie may be having trouble saving the rendered Ken Burns clip to the drive. It starts rendering it, hits a disk error, and gives up.
iMovie requires that the disk have the Mac OS Extended disk format, which most drives do NOT have when formatted for a PC.
Here's more about checking/setting the disk format:
http://discussions.apple.com/message.jspa?messageID=2920540#2920540
The iMovie trash bug that Sue mentioned wasn't a problem until iMovie 6.0.3, so if you're running iMovie 5 — the forum you've posted to — I'd look for something else. First the drive format. Then check out the comments about third-party iMovie plug-ins and QuickTime add-ons also discussed in the linked-to topic.
Karl -
'''have tried twice to import fav's,cookies ect,has not appeared under bookmarks as said.was using ie,'''
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r32
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
You can usually find the imported IE Favorites in a folder ("From Internet Explorer") at the bottom of the Bookmarks Menu folder (Bookmarks > Organize Bookmarks).<br />
If you can't find them there then try this:
Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export<br />
Import the HTML file in Firefox 3: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File<br />
See also http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file") -
remote disk doesn't appear in my finder. also cd sharing option does not appear under preferences
Hi i also had a recent problem with a stuck cd in my 12" powerbook slot loading drive. I would suggest attempting all the operating system problem solvers first that are covered in other discussions on this site, such as holding down alt + command(apple logo thingy) + F + O straight away when starting up your computer. This brings you to the open firmware where you type "eject cd."
My problem seemed more physical than a glitch in the operating system The CD would try to eject several times each time failing with a horrid grinding unhealthy sound as if something was blocking it. After a while the computer seemed to disable the act of even trying to eject the disc and the cd would not be recognize on my desktop or anywhere else.
After days of suffering and failed attempts I managed to get the disc out by getting another cd that was not important, and placing it in the mouth of the slot loading drive and carefully bending the cd gently in a wrist swiveling manor so that the slot got pushed wider. This sounds foolish behavior I know, but cds have a nice flex to them which softens contact with the soft aluminum metal. After a slight widening I tried ejecting once more and it thankfully worked. The disc that came out was incredibly scratched so I came to conclusion that the drive had been squashed a little bit down the line.
Any way hope this works and sorry about the essay.
Pete -
How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the first generation ipad.
The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972 -
Software updates do not appear under Updates
Software updates do not appear under Updates in the Mac App Store. So far, I have not been able to select or install the newest Yosemite update (10.10.1) and the latest iTune update. What could be the problem? Third party software shows and will update, like Evernote, but Apple branded updates do not appear.
Hello JAKE3POINT0,
After reviewing your post, I have located the page which includes the download of the 10.10.1 update. Applying the update may address the issue you are experiencing:
OS X Yosemite 10.10.1 Update
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
my ipad haas been disabled and whe connected to the computer it is recognised as a camera,plus it does not appear under itunes devices,i really want to get it working,what is the solution to this,thanks in advance
Hello popsicles,
This first article should be helpful in getting iTunes to recognize your iPad once more:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If the device is still disabled once it's appeared in iTunes again, please reference this second article:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Allen -
Reloaded Adobe Master Suite CS4 to new PC - After Effects does not appear
Recently had a PC take a lightning strike! Upon re-loading the Adobe Master Suite CS4 to my replacement machine, After Effects does not appear. Any suggestions besides re-loading the whole suite? Thanks!
Thank you Rick. When I look under the program Files Adobe > Adobe After Effects CS4 > the only folders and files are Mocha (Folder) Support Files (Folder) and the Mocha for Afetr Effects Shortcut.
- Mike -
I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8
Welcome to the Apple Community.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted. -
Songs not appearing under artists
Hi,
I'm going to try and explain this the best way I can,
On my Ipod (30GB), some songs do not appear under the artist.
Example:
I have two songs by Christina Aguilera, A is from the album "Stripped" and the other one (B) I haven't listed any album name (therefore it is Blank). So on my ipod when I go into:
[ Music -> Artist -> Christina Aguilera -> All ]
only song A is shown.
But if I go into [Music -> Songs ] I can find A and B...
So you see my problem,
If you have any idea, please answer,
Regards,
Waq
Windows XP Pro"the other one (B) I haven't listed any album name (therefore it is Blank)."
There is the problem.
See: Some songs don't don't show under artist on my iPod.
From what I understand, once you add a second album name for that artist even for a single song, ALL the rest of the songs should now show up under that artist, even those without album names. -
When I connect my iPod Classic, it does not appear under devices. I do have it on my iMac desktop, so I think the USB is working properly. The iPod also will connect to my PC with no problem; I synced yesterday evening. I have the latest iTunes on both computers.
Any ideas?See here: iPod does not appear in iTunes or iPod updater in Mac OS X
And here as well if necessary: iPod not recognized in iTunes and Mac desktop
Did it ever show up previously? If so, what has changed then? Have you recently installed any third party software/plug-ins/etc.?
B-rock -
"Assign access control" not appearing under Essbase in shared services
Hi Everyone,
Can anyone point out the reason behind this? This is leading to all sorts of problems. Configuration is as follows:
App Server: Foundation, EAS, Planning, Reporting, Web Analysis, Workspace on Tomcat
DB Server: Essbase and SQL Server
Essbase is on Shared Services mode.
This is actually very urgent. Would be grateful for any help.
Thanks,
SayantanThis has been posted in the essbase forum > "Assign access control" not appearing under Essbase in shared services
Cheers
John
http://john-goodwin.blogspot.com/ -
This is a new computer. I set up a new account. When I click on Music, Import does not appear to allow me to add my CD's
Hi,
See if these Links for Home Sharing add any light to the problem
Understanding
http://support.apple.com/kb/HT3819
Troubleshooting
http://support.apple.com/kb/TS2972
How to
http://support.apple.com/kb/HT2688 -
The option "Build-in Output" does not appear under my Sound preferences
The sound stopped coming out of my built in speakers. The sound does come through headphonse. The option "Built-in Output" does not appear under my Sound preferences. How can I restore the Built-in Output option under my Sound preferences. Currently the only option that displays is "Digital Out".
Please stop sticking things in your audio ports. you can very easily damage the switch. There is a simple procedure that usually will switch your mac back to internal speakers.
1. open the Audio MID setup app in your utilities folder.
2. Select 'built in output'
3. try the 'source' pull down menu. probably it will read 'digital out' with no other options.
4. control click the 'built in output' option on the left and select 'configure speakers' from the pull down menu.
5. a drop down window will open. Make sure 'Stereo' is selected and click 'done'
6. The Source pulldown menu should now read 'internal speakers'
7. Close the Audio MIDI setup app and get back to work -
Apps downloaded in iTunes Store do not appear under iTunes Apps tab
Apps downloaded in the iTunes Store (either as updates to existing apps or as new) do not appear under the 'Apps' tab in iTunes.
iTunes requests my Apple ID and password and the files will download afterward. However, they do not appear in the 'Apps' tab. This is confirmed by right-clicking >> Get Info. No update to the version and new apps do not appear.
Of note, I am running Lion an iMac 3.06 Core 2 Duo w/ iTunes 10.7.
My iTunes Library is located on a Mac Mini Server running Lion Server. I've checked permissions and every folder and library file is set to 'Read & Write' so it doesn't appear to be a permissions issue.
Any ideas?Also, I've tried individually downloading an app flagged for update in iTunes without any luck.
Maybe you are looking for
-
Errors generating Java classes from XML schema
I received the following errors when generating Java classes from the schema located at: http://imsproject.org/xsd/ims_qti_rootv1p1.xsd and http://imsproject.org/xsd/ims_xml.xsd XML Spy v4 claims that the schema is well-formed and valid. Could this b
-
Req approval process with Purchasing groups
Hi Gurus, Can anybody please help me with this. I need to setup the req approval process with purchaisng groups. how do i do that? The scenario is this: 1) A computer is requested and it is worth 1200 USD and the requestor puts the pur grp in the PR.
-
SQL server 2005 does not allow remote connnections error: 40 w/Synch Manage
I have a local server for B1 that I need to synch to a hosted Webserver. When I go to Synch Manager, I can't connect to the webtools on the hosted webserver even when I enter the IP address (which the firewall has been updated to allow). When I try
-
What program i need to write on pdf forms in my androd
What program do I need in order to write in my PDF form in my android
-
Regarding Field modification in ALV
I have displayed a table in editable ALV. i want to make the pop-ups in other columns if i press enter in any cell Any inputs ?