Wind u160 Need to locate my bios chip

HELP!!! So I purchased a new bios chip for my wind u160 but now I am staring at the mother board wondering where the hell I solder out the old and solder in the new. I have attached a photo of my board

It's better to contact the service center and let them help with the work or PM those people who has experienced.

Similar Messages

Where is a location of bios chip in HP G71-343US?

Do you know where is the loction of BIOS chip on HP G71-343US? Can you help?

Learn12 wrote:
Do you know where is the loction of BIOS chip on HP G71-343US? Can you help?
If your your thinking of messing with it doesn't matter if you find it you can't reset the password if you don't have the unlock code. And if this is a Business or Elite model that requires you contact HP support to send you a firmware to reset that password.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Where is the BIOS chip located on MSI B75A-G41

I need to replace the bios-chip on MSI B75A-G41. Anyone know where the chip is located?

I thought the BIOS would be the chip with the red dot on it like on other MSI MBs.

BIOS Chip TOSHIBA Satellite L305D-S59222

im trying the locate the bios chip on this laptop. can some one help me out.

If you are trying to reset a password or clear a bios that won't do a darn thing and could damage the bios chip. You need to use the cmos clear pins and for security reasons Toshiba does not disclose their locations to end users. Only authorized service centers have access to that information.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Where is the bios chip located in the Equium A210-1C4?

Have replacement bios chip for this model, but not sure where the bios chip is located on the motherboard?
Any assistance appreciated.

The BIOS chip is soldered onto the mainboard, you just can't replace it. It also needs to be programmed before usage using a special EPROM machine..

Satellite Pro A200 (PSAE4E) - BIOS chip location

Does anyone know the location of the BIOS chip on this Toshiba or have an image of something similar so I know what I am looking for? I have taken out the motherboard and despite a sticker that says ISKAA V1.20 BIOS, AAB4, U52 I cant find it (assuming U52 refers to the chip number).
Dead laptop after a failed BIOS update so investigating getting another reprogrammed if I can find where the chip is.
I didn't actually want to update the BIOS - I run the Toshiba BIOS util to see what version I had installed (I think every other BIOS util I have used allows you to see this info before doing anything) - the sire lists v5.6 for XP but v2.6 for Vista (haven't heard of different BIOSes for different OS's before. The Toshiba util went straight into programming - no info, no warning.
It's not worth the cost to replace the mobo and environmentally I would prefer to at least try the chip replacement (perhaps if anyone from Toshiba is reading this and they would prefer that environmentally it would be better to try than chuck it away, then they might feel inclined to let me know where it is!)
Any info gratefully received.
Cheers
Rob

Well Paul at Grains sent me a new programmed BIOS next day and it all worked perfectly. Being only 8 pins witha decent soldering iron it wasn't hard, and you don't even have to remove the motherboard as you can get to the PCMCIA mechanism retaining screws via the second hard disk slot.
So to recap if you have killed your BIOS:
You can pay a Toshiba ASP 150+VAT for a new mobo, plus 90+VAT fitting, plus 30 P&P
or
Get a new BIOS from GRAINS for 14 total inc P&P
He will fit for I think about 50 plus postage, but that is still a lot cheaper and it you are out of warranty a good option.
Hope the info helps someone else.
Rob

I need software bios full image to programmer bios chip for my labtop

hallo i need bios software for programmer bios chip because my labtop does't work after up date bios
I used the program bios, which is on the site, but it did not work for the piece I need a full copy of the bios to programming on my own programming
The model number of the device dv6-7030ee
thank you

abowdee wrote:
Well I want a file bios so I can run the machine what is the solution, so I will not run the computer what is the solution when hp Company
plz help me
thank you
No one will give you that. You only can download to update the bios you will not get the source code and any bios you download and edit is use at your own risk. And since we have no P/N no one can direct you to the BIOS update your system needs. If HP support didn't give you this information why do you think the HP user are going to have access to that information.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

K7T 266 Pro2 - bad flash ,bios chip manufacturer wanted

Hi, i've problem like many others, i've flashed my PRO2 Mother board with bios file of PRO2-A(the picture of PRO2 in msi site is bad, i've cooler on my northbridge and there isn't, but it's my mistake ) now i want to reprogram it and i need know the name or type you know, of that bios chip to reflash it with chip programer ,i can't see that name because after i unsticked the ami seal from chip, the text on chip have dissapeared ,can somebody help me with this? The only which is possible to see is the manufacturer - maybe EON or smthng similarly i'm not sure,i need to know all that is on that chip, thanx for help saculcz

Its probably just a bricked board. I suggest you phone your local PC shops and find out which one has a ISP programmer. That way they can flash the latest, or any BIOS version for that matter, onto the current BIOS chip, ensuite. Here is an example of such a programmer http://www.xeltek.com/In-System-Programmers/SuperPro-IS01/
Fry's Electronics in the US seems to be quite helpful from what I understand. That is of course if you are from the US.
You can download the latest BIOS from the MSI site and take that along on a USB flash drive, and they will be able to flash it for you, at a fee of course, normally.
Else you can search the web for companies that specialise in sending you ready flashed BIOS chips, which will of course cost money as well and means you have to solder it onto the board.
Alternatively you can send the board to a MSI technical centre and they will also do the job.
You will have to weigh up the costs and time effort and decide.

HP G62-435DX BIOS chip

Hello,
Please advise where the BIOS chip is located on an HP G62-435DX?
Thanks

Hi,
2mb, what is it ? Please try the following link (Software and Drivers):
http://support.hp.com/us-en/product/HP-G62-Notebook-PC-series/4346237/model/5051466/drivers
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Macbook Pro 8,2 (2011) - Unable to locate a BIOS ROM

Hi, everyone! I've had pretty good luck getting Arch running on my MBP 8,2 with hybrid graphics, using the integrated intel device. However, I'd very much like to be able to use VGA switcheroo and have an external display available.
I've extracted the vbios and int10 files as described here:
dentifrice.poivron.org/laptops/macbookpro8,2
And placed those files in /boot, as suggested (as well as /lib/firmware/radeon). I can manually load the firmware in GRUB via loadbios without throwing any errors, and everything seems to work as planned. However, when I load the radeon module up, this is what appears:
[10106.929747] [drm] radeon kernel modesetting enabled.
[10106.929782] checking generic (90010000 510000) vs hw (90000000 10000000)
[10106.929783] fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
[10106.929818] Console: switching to colour dummy device 80x25
[10106.930237] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x106B:0x00E1).
[10106.930310] [drm] register mmio base: 0xB0800000
[10106.930311] [drm] register mmio size: 131072
[10106.930313] vga_switcheroo: enabled
[10106.930351] radeon 0000:01:00.0: Invalid ROM contents
[10106.930395] radeon 0000:01:00.0: Invalid ROM contents
[10106.930400] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
[10106.930402] radeon 0000:01:00.0: Fatal error during GPU init
[10106.930403] [drm] radeon: finishing device.
[10106.930405] [TTM] Memory type 2 has not been initialized
[10106.931439] vga_switcheroo: disabled
[10106.931847] radeon: probe of 0000:01:00.0 failed with error -22
I've searched just about everywhere I can think of, and have even tried the vbios and int10 files from others' MBP8,2 in case mine was bad (booted into a liveCD using BIOS emulation and did the extraction). Everything else is working great, and I'd hate to have to go back to OSX just because of this.
In case it's relevant, I'm using linux-mainline (3.7-rc1) built from AUR, with the default options. My GRUB boot line looks like this:
menuentry 'Arch GNU/Linux, with Linux mainline kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-mainline kernel-true-d00b9933-ff02-4c0a-89f1-00fed33e0841' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
outb 0x728 1
outb 0x710 2
outb 0x740 2
# outb 0x750 0
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 8636ee87-53e7-4cdd-90d6-8473a41871bd
else
search --no-floppy --fs-uuid --set=root 8636ee87-53e7-4cdd-90d6-8473a41871bd
fi
loadbios /vbios.bin /int10.bin
echo 'Loading Linux mainline kernel ...'
linux /vmlinuz-linux-mainline root=UUID=d00b9933-ff02-4c0a-89f1-00fed33e0841 ro i915.modeset=1 i915.lvds_channel_mode=2 i915.lvds_use_ssc=0 acpi_backlight=vendor add_efi_memmap
I'd appreciate any help! I'm totally stuck here.

Update: I have now tried compiling vbios.bin and int10.bin directly into the kernel. No success.

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive.

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!

I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

Does iTunes match need to locate the actual files or just see its record in your library database? I am currently traveling in US and I have US and Australian iTunes accounts. But all my music files are on a hard drive in Australia.

Does iTunes match need to locate the actual files or just see its record in your library database? I am currently traveling in US and I have US and Australian iTunes accounts. But all my music files are on a hard drive in Australia. Can I start using itunes music match while I am travelling without the actual music files attached to my itunes?

In your situation I strongly recommend you read over that KB article. The international iTunes Stores are not cross-compatible.
My understanding of how it would work is that when activating iTunes Match on your US Store account, any songs you have in your iTunes Library that were purchased from the AUS Store account will NOT be matched. As I understand it, those files will be uploaded (which means you need the files on a local HDD). I also do not think it is possible to have iTunes Match active on more than one store ID on the same computer. But since iTunes Match is not available internationally yet, that point is moot for the moment.
To be honest you might want to wait until the service is available internationally so you can guage how will it will serve you.

My old Macbook Pro (10.4) died and I need to locate from the HDD where Netscape mail data resides so I can import it onto my new laptop, any ideas where it is located? I have tried home/library/mail.

My old Macbook Pro (10.4) died and I need to locate from the HDD where Netscape mail data resides so I can import it onto my new laptop, any ideas where it is located? I have tried home/library/mail.

Might be in /Home/Library/Netscape/ or in /Home/Library/Applications Support/ folder.

H-61MU-E35 (B3) 4MB BIOS Chip Vs 8MB BIOS BIN File - WinBond 25Q32BV

Hello,
I have MSI H-61MU-E35 (B3) motherboard with Ivy Bridge Processor, and everything was working fine, Using Windows XP, I may have updated BIOS with different model no, so upon booting I was getting message that "BIOS File Not Found..." In past, I had posted message in forum and got Big help but nothing worked nor message changed...
So, finally I build Rayer's circuit to flash BIOS using SPIPGM Software utility.
Rayer's SPI Circuit and SPIPGM software is working fine. I am also able to write BIOS and retrieving it back and also comparing with what was actually written, and able to compare to make sure, its writing correctly.
BIOS Chip Detected: Winbond 25Q32BV (4MB) Datasheet is Attached
I also read Chip number visually, which is matching with what's detected by SPIPGM (Rayer's software)
Product Page: us.msi.com/support/mb/H61MUE35_B3.html#down-bios
Issue is:
I have Ivy Bridge Processor and this motherboard supports Ivy Bridge Processor only with BIOS version12.x above.
(1) All Ivy Bridge Supported BOIS BIN File size is 8 MB and BIOS Chip size is 4 MB
Question is: How it's possible to write 8MB BIN file with 4MB BIOS Chip ?
There are 4MB size BIN File with older version, but that does not support Ivy Bridge Processor and with Ivy Bridge Processor in the socket, system will not boot to even say something.
Using SPIPGM utility, when I tried to feed 8MB BIN file to BIOS chip, it's complaining me that, File Size does not match with BIOS Size...

Hello SVet,
THANK YOU !! THANK YOU !! THANK YOU !!!
I downloaded your BIOS file using SPIPGM into Chip..... AND....
After 6 month later... finally My dead board is live again and booted Windows XP as original.... Amazing....
Agian... THANK YOU !! THANK YOU !! THANK YOU !!!

HT201272 I have an album that says I've downloaded, but some of the songs say I need to locate the file. How can I get the rest of my album downloaded?

I have a few songs on multiple albums that I have paid for. I tried to listen to a few songs. An exclamation point said I need to locate the files. I went in to ITunes and it said the items have been downloaded to my computer. I can't find them. Can anyone help? Thanks!

You can try manually downloading them:
1. Open iTunes and click on "Store"
2. Click "Purchased" in the top-right
3. Find the Album you need to compete and click the cloud next to it.

Wind u160 Need to locate my bios chip

Similar Messages

Maybe you are looking for