WinDbg(x64) can't install 1394 Windows Debug Driver (1394kdbg.sys)

I am unable to get kernel mode debugging with a 1394 connection to target working. 
When using WinDbg(x64) to start kernel debugging, the Windows Debug Driver (1394kdbg.sys) driver fails to install.  Note that I am executing WinDbg by selecting "Run As Administrator".
WinDbg reports ...
Failed to install 1394 device driver.  Error 0xE000020B.
I am using Visual Studio 2013 w/Update 4 and DDK V8.1 w/Update 1.  My platform is 64-bit Windows 7 Professional.
After attempting the driver install, the "1394 Windows Debug Driver" status in Device Manager has a yellow triangle bang status, and the device status is "Windows cannot load the device driver for this hardware. The driver may be corrupted
or missing. (Code 39)".
I have ...
1. uninstalled the DDK and re-installed it.
2. Manually uninstalled the driver and the 1394 Bus Host Controller driver and re-installed both (many times).
3. Replicated the exact problem on another system which has a different 1394 Bus Host Controller.
4. Found this link "http://www.osronline.com/showthread.cfm?link=249979" that exactly describes my situation as well.  Unfortunately, his solution was to install version 7 of the DDK.
Is there some issue with that driver?  
Any help will be greatly appreciated.

Hello,
I have found a solution that works for me:
I installed WDK 8 - onto a different Windows system, just to be sure to not mess up the WDK 8.1 installation on my development machine. After that I made a backup of the folder c:\Program Files (x86)\Windows Kits\8.1\Debuggers\x64\1394 on the development
system and replaced its content with the files from the appropriate directory in the WDK 8 installation path.
After manually uninstalling the driver for the 1394 Debugger Device and restarting Windows on the development system the driver installation initiated by the first attachment of the kernel debugger to the debuggee succeeded and debugging via Firewire is
now working as it should ...
Regards
Martin

Similar Messages

  • How can I install new windows on NB200-10z without a CD drive?

    Hi,
    I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
    I would like to do a recovery, but it also doesnt work.
    I know there is a shortcut like press the 0 button when the laptop is starting up.
    With this shortcut you can start the recovery to reset the software.
    But when I press the 0 button it gives me an error.
    So I think the recovery drive/partition is lost.
    How can I install new windows on this minilaptop without a CD drive?

    I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
    The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
    Before you begin, you will require the following:
    USB Flash Drive (4GB minimum)
    Windows 7 ISO Image file
    UNetbootin
    Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
    Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
    Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
    Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
    Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
    +Message was edited: link has been removed+

  • HT5639 i use boot camp to install windows 8.1 but in the middle of the installation it is stop,how can i install the windows again?

    i use boot camp to install windows 8.1on my mac but in the middle of the installation it is stop,how can i install the windows again?
    why it`s stop?

    What is your exact machine and what's the error

  • How can i install C:\WINDOWS\system32\regsvr32 Msx...

    how can I install C:\WINDOWS\system32\regsvr32 Msxml3.dll for Nokia N70 on windows XP?

    Run command:
    regsvr32 msxml3.dll
    Msxml3.dll is a Microsoft XML parser dynamic link library. It is
    obviously needed by PC Suite, but wasn't registered as installed
    by the system. Using the "regsvr32" command on the .dll registers the file.
    What's the law of the jungle?

  • Oracle Database 11g version 11.1.0.6.0 can be installed on windows 7

    Hi,
    I would like to ask if Oracle Database 11g version 11.1.0.6.0 can be installed on windows 7 32-bit.
    if it could please how?

    Welcome to the forums !
    Officially, Oracle has not certified any database software for Windows 7 as of today.
    That does not prevent folks from trying to install :-) see Oracle 11g on Windows 7 as an example.
    Use the search feature to find other threads.
    Pl note that if you run into issues, you are on your own.
    HTH
    Srini

  • Which Oracle version can i install on Windows 7 home premium edition?

    Hi,
    Can anyone please let me know Which Oracle version can i install on Windows 7 64 bit home premium edition?
    Thanks in Advance,
    Arun Kumar.
    Edited by: 884258 on Sep 9, 2011 6:21 AM

    Oracle database compatible for windows 7
    Already asked and answered in these forums - pl use the search feature
    HTH
    Srini

  • Can we install JDeveloper (Window NT/2000) on Windows 98..??

    Can we install JDeveloper (Window NT/2000) on Windows 98?
    If not, is there a version available for Windows 98?
    Thanks

    Yes, you can. Just insert the linux CD in the CD-ROM drive and when asked about the internal hard disk, be careful not to touch it. Also you should use GRUB or LILO to make the system dual bootable. You can go to http://www.tldp.org and look for the corresponding document.
    HTH,
    Yasaswi

  • Can I install additional Windows Partition?

    Hi,
    I currently have a Mac Pro OS X 10.5.8 with a 500 GB HD (primary) with Boot Camp 2.1 with a 220 GB Windows Vista (32 bit) partition running on my system. Works great.
    I just purchased an Western Digital Black Caviar 1 TB internal drive and I own an unused copy of Windows XP SP2.
    Can I partition my new drive (secondary) with Bootcamp Assistant and create a Windows XP partition that I can boot up into as well as my Vista partition?
    Please Help!
    Thank you,
    Leapstepman

    So are you technically saying that Boot camp doesn't allow the user to add more than one Windows installation? I know it doesn't allow more than one install per a volume. But I was hoping to split my 1 TB drive into 500 GB partitions and allocate one partition to OS X and the other to the new Windows XP install.
    I found below info but it wasn't 100% clear to me if it is saying only one Windows partition per each volume or one Windows partition period.
    ===========================
    From Boot Camp 2.0 FAQs:
    I have more than one hard drive, can I install Microsoft Windows on any drive?
    You can install only one Windows partition on any of your computer volumes. The Setup Assistant will allow you to partition drives, or to install Microsoft Windows on an entire drive if it does not contain Mac OS X.
    ===========================
    Leapstepman

  • Hp dc 7800 how can i install pci serial port driver on windows 8.1

    hp dc 7800 how can i install  pci serial port driver on windows 8.1  please help
    This question was solved.
    View Solution.

    Hi:
    Download and install the W7 AMT driver.
    http://h20565.www2.hp.com/portal/site/hpsc/templat​e.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&sp​...

  • Can i install iCloud on a drive other than C:?

    I am installing i Cloud on a Windows 7  but do not have an option of putting it any where but C drive. How can i install it to another drive? I keeep my operating system on a small partition and install all my programs to a larger partition.

    Install it normally, launch it with the Shift key held down, and create a new library on the desired drive. The iTunes application contains system components and therefore must be installed on the drive or partition containing the OS.
    (95467)

  • Can you install a second hard drive on a Touchsmart320-1130 PC?

    This question was solved.
    View Solution.

    Here are the specs for your HP TouchSmart 320-1130a Desktop Computer. No, you can't install a second hard drive in this computer. The HP TouchSmart and All-in-One computers have more in common with laptops than they do with desktops.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Can't install a 32 bit driver on my new 64 bit server

    I have a windows 2008 R2 server runing the print server. I have a HP Laserjet 4345 MFP Printer and can't install the 32 bit driver. I have installed the 64 bit but when I try to add the 32 bit driver is states that it is not the correct driver? I have downloaded the PCl 5 Driver (HP_LJ_M4345MFP_PCL5_32bit) But it states it the wrong driver. Please Help
    Thanks,
    Dave
    David Babbel
    System Admin

    Hi broadwater,
    Could you please re-download the package from this link and then install
    http://www.adobe.com/go/tryphotoshop_elements/
    Regards,
    Sandeep

  • Can I install a 1TB Hard Drive into a late 2007 17" MacBook Pro?

    Can I install a 1TB Hard Drive into a late 2007 17" MacBook Pro currently running a 160 GB Hard Drive?

    It depends upon exactly what you want to do with your Mac.  My old Late 2007 17" MacBook Pro only has 4GB RAM and it works fine.  It is a little slow if I am doing anything involving heavy computing (rendering video, compiling programs, etc.) but it works just fine.  In most cases, the increased RAM will help performance, but the cost can be fairly high with an older machine like you have.

  • Can I install a bigger hard drive on my HP Laptop dv9230us

    Can I install a bigger hard drive on my HP Laptop dv9230us

    Yes and in fact it can accept 2 hard drives. Any 2.5 inch wide SATA laptop hard drive 9.5 mm thick will work and those are available up to 1.5 TB I believe. To add a second hard drive you need a caddy and connector piece sold here:
    http://www.newmodeus.com/shop/index.php?main_page=product_info&cPath=2_5&products_id=131
    There is a link on the page above which will lead you to installation instructions.
    If you can give us some idea of what you are looking to do, we can link you to specific places to buy drives at good prices. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Can you install Tiger onto a drive with data?

    Hello,
    I would like to ask if you can install Tiger onto a hard drive that already has data files on it. I have a 250 GIG hard drive and it already has 10 GIGs of data on it. Can I install Tiger on this drive or might it corrupt my files?
    Its a long story but here is a quick summary of why I am attempting to do this:
    I have a 350 MHz Blue and white G3 (rev 1) with two hard drives: the original 12 GIG ATA drive and a 250 GIG SATA drive (internal) connected with a 1S2 Seritek SATA controller.
    My 250 GIG drive has two partitions but only one is available to Tiger. You see, by accident I originally formatted my 250 GIG drive with an extremely small partion (32 Megs). I meant to type "30 GIGs" and by accident I typed "30 Megs". Oops That was supposed to be my OSX 10.4 volume. Its too late now - its too small. So I only have two choices for a place for TIger: my 12 GIG drive or the other partition of my 250 GIG drive. I am reluctant to choose my 12 GIG drive because it already has an older OS on it (OS 8.6).
    I was concerned about installing TIger on the data partition of the 250 GIG drive because that is where all my valuable data files are - 10 Gigs of data. I don't want to risk scrambling this data in any way.
    Is it safe to install Tiger onto this partition with my data files? Or is the possibility it might do something to my data.
    Its only a temporary install so that I could burn my 10 GIGs of data files to DVD for backup and then I will start all over again and erase the entire hard drive and reinstall from scratch onto the 250 GIG drive once my data files are safely backed up. (I will not partition the 250 GIG drive i nthe final install - it will be one big partition.)
    One other question:
    When you format a disk in Tiger are there options to "low level format" or "zero all data" or will just a straight "erase" do the job sufficiently? I bought my 250 GIG Hitachi SATA drive new and so I am not sure if it worth the time to re-erase it with "zero all data" (if that is an option in the Tiger Disk Utility). What is the best formatting option to prepare this drive in the most beneficial for Tiger?
    Thanks for any suggestions.

    Thanks scb and Jeff,
    Jeff, you have me thinking now. I think I will be safe and try another idea. I have a 4 GIG internal SCSI drive I could use to backup my data in 4 GIG sections at a time via my Adaptec 2430 SCSI card. I could then move this hard drive over to my other G3 onto its 40 GIG hard drive. This would be done three times to take off all my data and essentially provide a backup before I install Tiger. Good idea. You are right. It is better to play it safe.
    By the way 8.6 can handle HFS+. And yes, I should eventually buy an external drive solution - probably an enclosure. I saw one called "coolmax" [1]. It could hold a SATA drive and it had USB, firewire and also an external SATA port.
    And also Jef thanks for the info about formatting drives. I am glad to hear it is not important to zero all data if you don't have to. I am not concerned about havig anything to hide and so yes, I will just click "format" - that should be fine. Zero all data takes such a long time and I would rather avoid using it if I don't need this feature. Thanks for the advice.
    Thanks for the new safer direction.
    [1] Coolmax (CD-311-SATA Combo)
    Coolmax Aluminum USB 2.0 External Case/Enclosure for 3.5" SATA/IDE Hard Drives, USB2.0, IEEE1394a, Serial ATA triple interface input CD-311-SATA Combo
    http://www.iocombo.com/product/showproduct.php?productid=0EGD&PHPSESSID=3c41735b f27252cf17a17350cb603e0e
    $69.95
    http://store.yahoo.com/directron/35enclosure.html
    $53.99 at directron

Maybe you are looking for