Winddows XP on H87-G43 need AHCI enabled.

hi all
i have installed win XP on H87-G43 mobo where the current driver setting on bios is set to IDE. i need this to be SATA/ACHI. currently winXP is patched to SP3 and mobo drivers are installed. if there is a setting that allows individual HD's to be set to IDE or SATA i know exactly what to do . but in this case im totaly lost. pleas help me.

Quote from: CSM101 on 19-July-13, 10:48:04
yup. installed win 7 and after the installation all i have to do is update the primery and secondary channels drivers to AHCI to get it done. this means i have to do switching in bios SATA mode from AHCI to IDE and IDE to AHCI when ever i swtich from win 7 to XP and vise versa.
If you don't have a SSD drive there is nothing much AHCI do more than at IDE mode if that helps.

Similar Messages

XMP Profile with H87 G43 Gaming

Hi, I just purchased Mainboard H87 G43 Gaming for my new rig.
I just notice that my Corsair RAM ( CMZ8GX3M2A1600C9 2x4GB DDR3 Timing 9-9-9-24 ) is not run its full potential.
It should can run at 1600Mhz. Instead it just run at 1333Mhz as default.
After that I decided to enable XMP from BIOS. But my CPU will not boot if I enable it.
Fyi, I just enable XMP without touching other options in BIOS and I have experience in enabling XMP with the same RAM sticks in another board without problem.
I already update BIOS using version B4 and B3. But still no success :(
Please refer to the screen capture for the setting in BIOS :
Do I miss something?

Quote from: Sea Dog on 05-April-14, 14:02:26
Disable XMP, set DRAM Frequency manual out of Auto to 1600, set DRAM V. to 1.565v's or so, if need be, set Dram Timing Mode to Link, set timings manual CR 1, 9 9 9 24. That should do it.
Thanks for the response.
I just test each RAM stick and found out that 1 of it is faulty.
Its a bit strange that 1 month ago it worked great in my old Mainboard.
Anyway, I just RMA the RAM sticks and get the new one. now works perfectly

H87-G43 Gaming have no sound in Win 7

Q: I have a H87-G43 Gaming MB but the sound is not working under Win 7 64 bit, I also try to download the latest Realtek 1150 Audio driver from MSI web.
A: You need to update the Service pack 1 for your Windows 7 64bit to patch this issue.

See if there is anything useful on http://kb2.adobe.com/cps/837/cpsid_83739.html - also check the contents at the bottom.

MSI H87-G43

Hello,
I am trying to figure out if this board MSI H87-G43 supports the Haswell Refresh CPU's straight out of the box. I have a feeling it does not, as the latest BIOS 2.7 mentions the Haswell Refresh CPU's. So essentially If I purchase the board I would be playing Russian roulette with the hope that the board was updated to 2.7. Any solution to this? Do I have to have another CPU just to update the board?
Any help would be appreciated.
Thanks

Any board that left the fab after 2014-02-25 supports the refresh cpus out of the box (hence being at bios 2.7). Older boards would need to be updated else no Haswell refresh would work (and you'd need an older Haswell to flash).
If you can check the board's S/N you can find out the date of manufacture.
example:
601-7816-XXXX131209XXXX
In this case board would be manufactured 2013-12-09. Position of the date is identical in any S/N for boards.

H87-G43 Gaming and i5 4570 max turbo on cores

hello all.
Iam trying since yesterday to max my turbo mode @ all cpu cores via bios. I did put enchance turbo on auto/enable and i also tried to put manual x36 in each cpu multi. Every time the cores went up to 3.4 . I have read that with old bios it is possible to push all cores @ maximum turbo speed on H87-G43. My bios version is v11.0 . If anyone could help me out i will be very happy.
Thanks and nice to meeting you all

You have a 4570? Not the 4570K?
Only Z87 boards can overclock.
Early H87 BIOS versions could overclock but only with K CPUs. Those BIOS versions were update with a new microcode from Intel to fix a loophole in the B and Hseries boards.
If you had a K series CPU and you were prepared to flash a BIOS pre August 2013, then you had a chance of doing this. Even then there would have been no guarantee.
If you wanted to be certain of OC'ing, you should have opted for the Z board and K CPU.
Here you can find the official Intel high level differences between the chipsets. http://www.pugetsystems.com/labs/articles/Z87-H87-H81-Q87-Q85-B85-What-is-the-difference-473/

Intel Rapid Storage Technology MSI H87-G43

I built a new system for a relative using the H87-G43 MSI board. I have set up a SSD 64 GB to be used as a Caching disk using Intel's Rapid Storage Technology.
I followed the set up procedure which required a BIOS change to RAID Mode before the OS was installed. So I have one 500 GB drive that is accelerated and the 64 GB SSD that is being used as the caching drive.
No errors or BSOD's when booting, I had to enable the drive in the Intel console for this(it sees the drive just fine) to work. The Intel Rapid Storage Technology(Intel SRT) really improves boot times over just using the mechanical drive. It is not a performance issue I am having just a reporting issue I think.
The question I have is about how Windows is reporting the drives in Device manager and computer management.
In device manager only the 500 GB drive is shown and it is shown as a SCSI device.
In computer management only the 500 GB drive is shown.
Both drives are shown in the Intel management console for this technology.
The computer is running fine and zippy, I am just a bit concerned about the 500GB drive (SATA) being reported as SCSI. Funny I downloaded SPECCY and it shows it as a SCSI drive as well using a 40 pin cable.
Any help, thoughts, ideas, or experience with this technology that could enlighten me would be very helpful.
Thanks

Problem solved, windows showing HDD as SCSI device is normal behavior. This was confirmed.

I have a Mac OS 10.6.7 running Firefox 4.0.1. What happened to the enable cookies in Preference/Privacy. It's gone I need to enable. Thanks.

Question
I have a Mac OS 10.6.7 running Firefox 4.0.1. What happened to the enable cookies in Preference/Privacy. It's gone and I think I need to enable. I can't log on to Citibank to pay my bills using Firefox or Safari for that matter. Citibank says cookies must be enabled to access their on-line bank. I wonder if this is the problem...cookies that is?

Yes, I found the cookies, and thanks for taking the time to help out. I called Citibank. They told me that they will not support Firefox or Safari for Mac because our user group is too small for them and the expense too high. The person that I spoke to said in the past, Firefox has worked with Citi, but that was just by accident. At the moment they have no plans to help Mac people using the latest OS log onto their website or enable programs like my Quicken or Mint.com to access. They don't work anymore either. I think all the problems happened after the last OS update.

I have a plug in called unity player 3.4 do I need it enabled, same thing with google update 1.3.21.69 on laptop running windows 7

I just bought my laptop & was checking add-on for updates all of the other plug ins updated, & I've installed all up to date, but not sure, I have no knowledge about if I even need to enable the- Unity Player 3.4.0.27242, ( I'm not a gamer) nor do I know what the Google update 1.3.21.69 is use for. Or can it be disabled as well?

For unity player you can see there:
http://en.wikipedia.org/wiki/Unity_%28game_engine%29
http://unity3d.com/webplayer/
i think you can disabled if you are not a gamer
For Google update look here:
http://forums.mozillazine.org/viewtopic.php?f=7&t=841905
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Need to enable admin acct with user permission..

I have change the acct type and made ID that is disable an admin.. is the only admin acct in my desktop... when ever i tried anything with admin permission. the AUC will pop up but no where to enter my admin Password... run as does not work either.. because
the only admin acct is disabled..... please help... and I have the computer to login automatic on start...

Hi,
Since all administrator account was disabled in your system, there is no way to run a program that need admin rights.
You do need to enable administrator account in Computer Management.
Roger Lu
TechNet Community Support

I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable?

I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable? Any ideas

Try dragging the image to the desktop, then drag the image to the slide you want it on

Need to enable html snippet insertion in CS4

The insert html snippet option is disabled on my insert menu and I need to enable it. Please help. Thanks.

Hi,
The website administrator has to enable the permission for inserting HTML snippet, for your role, for the Insert HTML Snippet menu to be enabled. If you are the website administrator, you can follow these steps to enable the Insert HTML snippet menu item:-
Launch Contribute and select Edit -> Administer Websites, and select your website.
The Administration dialog for your website will be shown.
Select a role (for ex, Administrator), and click Edit Role Settings button.
The Edit Role Settings dialog will be shown.
In this dialog, select Editing from the left panel, and check the check box for 'Allow HTML Snippet Insertion'.
For more information, click the following link http://blogs.adobe.com/contribute/2009/06/are_you_a_power_user_try_using.html
Hope this helps. Cheers.

Need to enable HTML snippet in CS5

I need help enabling the HTML snippet in with my CS5 version of contribute. Our website was created by a firm that used CS3. They no longer use this tool or have access to contribute. I am set up as a administrator, but it appears I don't have full administrator rights. How can I gain these if the orginial administrator no longer has access? Please HELP!

1) FTP to your site in the server.
2) Navigate to the cthub****.csi file under _mm folder
3) Edit the file and make the value <allow_html_snippet_insertion value='true' />
This will enable the html snippet option for your site for that particular role.

HT201343 I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confuse

I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confused.

To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
About AirPlay Mirroring in OS X

Should Enhanced Turbo still work on H87-G43 for non-k i7-4770?

Having a similar issue to the one described here ( https://forum-en.msi.com/index.php?topic=172887.msg1258722#msg1258722 ) but this is on a H87-G43 with a non-k i7-4770. The feature used to work fine with all 4 cores going to 3.9 GHz on turbo but, with the stock cooler that I was using, thermal throttling became an issue on high workloads (e.g. AIDA64 stress test, handbrake, etc.).
So, I disabled Enhanced Turbo and I ordered a Hyper 212 Evo which I only recently installed. I turned Enhanced Turbo back on but now it seems that Enhanced Turbo is offering nothing extra over normal turbo with the 4 cores only hitting 3.7 GHz under load and not the 3.9 GHz that they used to reach. Hardware is the same (except the cooler, which has no effect) so I presume that it must be BIOS-related.
I'm running latest v2.5 BIOS for the board and have changed the Core Ratio Limits manually to value of 39 but still no joy. Does anyone else have this issue on H87-G43 with a non-k i7-4770? Can anyone confirm that the feature is working for them with a non-k i7-4770 (or any non-k CPU) on a H87-G43 with this latest v2.5 BIOS?

Ok, so I've done numerous BIOS flashes and here's what I have found:
Rather like the user in this topic ( https://forum-en.msi.com/index.php?topic=172887.msg1258722#msg1258722 ), I found that the Enhanced Turbo worked correctly on the H87-G43 and i7-4770 with default Auto settings up to BIOS v2.3 (2013-06-07). The clock multiplier was set to 39 allowing turbo operation at 3.9 GHz on all cores.
With the introduction of BIOS v2.4 (2013-08-16), again similar to the other user, it is necessary to manually set the 1/2/3/4-Core Ratio Limit values (found in the CPU Features sub-menu of the OC Menu) to the value of 39 in order to allow turbo operation at 3.9 GHz on all cores.
Using BIOS v2.5 (2013-09-23), no matter what settings, it does not seem possible to allow turbo operation at 3.9 GHz on all cores with an i7-4770. It would seem the feature has either been accidentally or deliberately disabled in this latest BIOS. I'll raise it directly in a support ticket to MSI and in the meantime I will stay on BIOS v2.4 which is the most recent BIOS that allows me to get the most out of my CPU and new cooler.
Thanks again to xmad for his help and advice. Hopefully this post will save time and effort for other users with similar issues.

Javascript application this function has been disabled. need to enable it so i can clear my history

javascript application this function has been disabled, I need to enable it to clear history

A likely cause of the first issue is that you are first closing all Firefox windows and then close the Firefox application.
Some have reported that closing Firefox (Firefox > Quit) while the browser window is still open works for them.
*Bug 845681 - Closing all windows and quitting Firefox afterwards leads to about:sessionrestore to be shown on next startup
For the second issue try this:
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Winddows XP on H87-G43 need AHCI enabled.

Similar Messages

Maybe you are looking for