Windos 2008 KMS host can't activate Windows 8 clients

Hi, I have a Windows 2008 R2 SP1 working as a KMS Host, i can activate Windows 7, Office 2010 and Office 2013 without problems, but, when I try to activate Windows 8 clients an error is showed: 0XC004F042, this same error code us registered in the service
log of the KMS Host.
Thanks in advanced for your help

This error almost always means that the KMSclient has successfully contacted a valid KMShost, but, the KMShost does not have the required KMShost productkey installed (e.g. a Windows8 KMSclient contacted a KMShost, but that KMshost doesn't have the needed
update/patch/productkeys installed).
http://technet.microsoft.com/en-us/library/ff793399.aspx
Here's a wiki article I threw together:
http://social.technet.microsoft.com/wiki/contents/articles/22510.volume-activation-kms-mak-adba-avma.aspx
Are you trying to activate Win8.0 or Win8.1?
(the required update/patch/productkey, is different...)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

LaserJet 2550n network printer on XP host PC, can't install Windows 7 client laptop

Have Color LaserJet 2550n network printer connected to XP host PC. I can't install Windows 7 client laptop for printer. The wireless network is fine, I can access documents back and forth, merely the printer doesn't work and there's no way to download 64bit drivers for this printer from HP.

Resolved, not solved.
I talked to HP product support. The Officejet Pro 8500 A910 will not install on Windows XP (at least the Home Edition) when networked through a router. It will install through USB. I uninstalled the program and reinstalled it with only USB connected to clean out all the network printer/scanner information. Product support claimed it would install through an ether net cable connected between the printer and computer but this does little good if you need internet access.

I have a valid MSDN subscriber ID and I can't activate Windows Azure

Hi,
My name is Diem Nguyen and I work for State of Michigan. My email is I have a valid MSDN subscriber ID and I can't activate Windows Azure. Can you please help.
Thanks
Diem

Go to msdn account
http://msdn.microsoft.com/en-us/subscriptions/aa336858.aspx
When you click on the account tab you see Microsoft Azure in left pane. In that there will
be link for Activate
Microsoft Azure.

Re-use Hyper V VM built in Windows Server 2008 R2 host in a new Windows Server 2012 host

Hi Forum members,
I was assigned a Windows Server 2008 R2 host machine with Hyper-V which I used to build many VM's for testing. This host machine now is going to be replaced with a new Windows Server 2012 host machine. Is it possible for me to continue
to use those VM's without any migration (e.g. is it possible to import or simply move the *.vhd + *.avhd files from the 2008 Server to 2012 Server and use them)?
Thanks and Regards,
Hien

That is the official statement of 'support'
They will run, and you may need to do some custom configuration (such as using a legacy nic) but you can't call MSFT support and say your Server 2003 VM is broken on Hyper-V 2012 R2
The act of importing the configuration and linking to the VHD and snapshots will work.
The act of booting the VM and having the OS in the VM 100% happy is not automatic, but should work.
It becomes a question of where do you place the risk.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Can't Activate Windows 8 after Image Deployment

Hello,
I've got troubles with activating Window 8 after deploying it from my WDS server.
Made an Image of a laptop in Audit Mode and activated it before using Sysprep.
After capturing and deploying it I'm getting this error when trying to activate Windows.
Error code 0x800751D (No records found for given DNS query)
All drivers are installed, I can run Windows Updates, Apps are working.
Everything seems fine, except for this.
Also tried Sysprep without activating Windows 8, but after deploying the image I'm getting the same Error.
My Unattended file for this Image contains a KMS client Key for Windows 8 (334NH-RXG76-64THK-C7CKG-D3VPT) so that it skips the activation step during the innstallation. Also tried to fill it in with xxxxx-xxxxx-xxxxx-xxxxx-xxxxx, but didnt work.
I little help needed here !
Kind Regards,,
Bas

if there isn't an embedded product key for Win8, you'll need to supply one, either in the unattend, or at deploy time. The pkey you supply, will need to match the channel of the product you're installing.
So, if you are using Retail media, use the Retail pkey that you have purchased for that machine. Retail pkeys are not multiple-use.
If you are using VL channel media, your choice is to use KMS or MAK.
I'm not too familiar with OEM preloading, but I've read that OEMs preload with a generic pkey, which is basically ignored if the embedded key is detected during OOBE.
I've always understood that images shouldn't be captured when the sysprep status is audit mode, and, that OOBE/generalize is where you capture (used to be know as re-seal), and, that specialize is a necessary step that shouldn't be avoided. One of the reasons
for this, is that the generalize process will rearm the Windows Activation of the image, and, specialize will perform the individuation of the image at deployment, calculate the necessary hardware hash, and trigger Windows Activation to begin.
bypassing these steps typically leaves you with more trouble to resolve, and, a deployment that is harder to support (and MS deem non-sysprepped systems as unsupported).
Why is it that skipping specialize is important to you?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Can't activate windows vista

I am trying to install Windows Vista Business (retail boxed) 64 bit. The box didn't include 64 bit media and so I've downloaded it from technet. The install asks for the product key but it is not accepted "your product key cannot be validated.
Review your product key and make sure that you have entered it correctly".
I have been in a chat with microsoft for 2.5 hours so far and they have referred me to this forum. I don't feel that I am getting anywhere and I am incredibly frustrated.
I enclose the contents of the chat so that you can see what has already been discussed and what steps have already been taken.
You are now chatting with 'Ethan'.
Ethan: at 10:05:35
Hello Craig. Welcome to the TechNet Online Concierge. How may I assist you today?
Ethan: at 10:07:56
Excuse me, Craig, are you there?
Craig Stenton: at 10:08:01
Hi Ethan. I believe I spoke to you yesterday. I have a retail boxed version of Vista that has been unused that I'd like to use, but it only includes media for 32 bit and I am trying to obtain the media for 64 bit. I was given a link to download the software,
which I have done but my product key doesn't work with the software - product key cannot be validated. The software that I have is Vista Business (box)
Ethan: at 10:09:36
Thanks for your inquiry. In that case, you may claim a product key from the downloading page by clicking the "Product Keys" button.
Ethan: at 10:10:06
Or do you still want to use that product key?
Craig Stenton: at 10:11:07
That's ok if I can legally do that. The software will not be used by me and so I'm not sure the technet license should be used by another. I'm ok with it because I know that I have got a license for Vista. Is that ok legally?
Craig Stenton: at 10:12:01
Also, now that Microsoft is finishing the technet program, what happens to the license keys? Will they become invalid at some point in time?
Ethan: at 10:12:40
Technically, they will continue to work as usual. However, according to TechNet Licensing Terms, you must remove all TechNet products after your subscription expires. There is no perpetual use rights for any TechNet subscription.
Craig Stenton: at 10:16:08
So how does that relate to this enquiry? If I use the technet license and then my subscription expires then I can no-longer use the technet product key. Is it ok to continue to use it in place of the one with the boxed product? If it will work technically,
and I can prove that I have one product key (that I am not using for technical reasons) is that ok?
Ethan: at 10:18:06
In this case, I'd like to check your product key for you. Could you please send the key to [email protected] with "To Ethan" included in the subject so that I could know the issue better? Thanks.
Ethan: at 10:20:45
I mean I'd like to check why the key can't activate your media so that I could tell you if there is any other solutions.
Craig Stenton: at 10:22:01
My media only seems to install 32 bit but the license covers 32 bit and 64 bit. I need 64 bit media.
Craig Stenton: at 10:22:46
My product key doesn't work with the 64 bit media that I have downloaded from technet.
Ethan: at 10:23:38
Excuse me, you mean your product key is a 32 bit key, right?
Craig Stenton: at 10:24:22
I have a product key and just want 64 bit software to work with it. I want it to be legally correct but to a point, in my mind, it shouldn't matter if the software has to use a different product key to replace mine.
Ethan: at 10:26:43
Please note that product key and installation media must match with each other. Do you need me to check the type of your product key for you at this moment?
Craig Stenton: at 10:27:07
There is nothing on the box to say that it is 32 bit only. It does say "includes 32 bit dvd and information on obtaining 64 bit dvd", which does suggest that the product key is for 32 bit and 64 bit. there isn't any information to obtain 64 bit media
Ethan: at 10:31:25
Thanks for your information. In this case, I'd suggest you to contact our Windows Store support to see if they could provide you the retail installation media for you.
Ethan: at 10:31:25
Please click “Windows store support” on the bottom of the following to submit a support ticket for assistance:
Ethan: at 10:31:25
https://msdn.microsoft.com/subscriptions/windevcenter
Craig Stenton: at 10:32:46
Link just takes me to a page that says "We can't find any MSDN Subscriptions that are linked to your current Microsoft Account. If you have your subscription details (Subscriber ID or Benefit Access Number, name, and email) then you can activate your account
to start using your subscription benefits."
Ethan: at 10:33:21
Sorry, one more moment please.
Ethan: at 10:36:52
Still checking, one more moment please.
Craig Stenton: at 10:42:56
ok
Ethan: at 10:43:27
Sorry for the delay.
Ethan: at 10:43:27
Microsoft Store Hours of Operation:
Ethan: at 10:43:27
08:00-20:00 (GMT), Monday - Friday + 09:00-18:00 (GMT), Saturday
Ethan: at 10:43:27
Microsoft Store Sales and Customer Support.
Ethan: at 10:43:27
One of our representatives can process the order over the phone for you:
Ethan: at 10:43:27
0800 026 0329
Ethan: at 10:44:25
By the way, may I know where did you get this product key?
Craig Stenton: at 10:45:28
But surely I can just download the 64bit software? I don't want to have to wait for a disk to be delivered and I don't expect to have to pay for it if it's available on download.
Craig Stenton: at 10:46:19
The product key is on the Vista Business box. I can provide a photo if you wish
Ethan: at 10:46:31
Sorry, I mean could you please tell me where did you get your retail boxed version of Vista
Craig Stenton: at 10:47:36
Oh, sorry. I can't be certain. Possibly PC World - I used them quite a lot at that time.
Craig Stenton: at 10:49:05
I didn't buy it off ebay or other dubious sources if that is the purpose of your query. If I look back through our accounts I will be able to determine where it was purchased but that is a big task.
Ethan: at 10:53:16
I just double checked it for you, Windows Vista product keys should work for both 36 bit and 65 bit versions.
Ethan: at 10:54:11
**Windows Vista product keys should work for both 36 bit and 64 bit versions. Sorry for my typo.
Craig Stenton: at 10:55:17
I saw that but I know what you meant ;-> so, now that we know that my product key is valid for 64 bit, how do I download the 64bit media? It must be available.
Ethan: at 10:57:55
Just to confirm, your product key is for Windows Vista Business, right?
Craig Stenton: at 10:58:50
Yes, that is correct
Ethan: at 11:02:37
Could you please tell me if you have used before? Also please give me more information about activating the media downloaded from our TechNet site.
Ethan: at 11:02:55
**Could you please tell me if you have used the key before? Also please give me more information about activating the media downloaded from our TechNet site.
Ethan: at 11:04:30
Sorry, I just noticed that you said the key is unused. Then could you please tell me the error message when you activate with the key?
Craig Stenton: at 11:04:52
TBH, I'm not even sure I ever used it, but if I did, it wasn't for long. I purchased it so that I could support a couple of users with new Vista laptops but then downgraded them to XP due to problems (then) with Vista.
Craig Stenton: at 11:06:14
The problem that I get when trying to use my product key with the download from technet is "your product key cannot be validated. Review your product key and make sure that you have entered it correctly"
Ethan: at 11:06:48
In that case, could you please send the key to [email protected] with "To Ethan" included in the subject so that I could check for you if the key is still valid?
Ethan: at 11:09:17
Excuse me, Craig, are you still there?
Craig Stenton: at 11:11:10
yES, i AM STILL HERE. jUST SENDING THE EMAIL
Craig Stenton: at 11:11:31
Sorry, caps on for typing the product key in my email to you.
Ethan: at 11:12:02
It's okay, please take your time.
Craig Stenton: at 11:16:24
I have sent the email to you. I have included photos of the product key and the message.
Ethan: at 11:17:08
Thank you, please give me a moment to check it for you.
Craig Stenton: at 11:19:47
ok
Ethan: at 11:23:57
Still checking. Sorry for the delay.
Ethan: at 11:31:44
Thanks for your waiting. I have checked it for you, your product key is valid.
Craig Stenton: at 11:32:23
OK, but it doesn't work with the software downloaded from technet so what do we do about it?
Ethan: at 11:32:27
But I'm afraid it can be only used on one machine.
Craig Stenton: at 11:33:06
It will only be used on one machine.
Ethan: at 11:35:24
Our tool shows that the key has been used for activation before. Is that also on the same machine?
Craig Stenton: at 11:37:40
If it has been activated before then it would either have been my machine, in which case it hasn't been used for a very long time, or a 32 bit version on the machine that I am trying to use it on, which would have been in the past couple of days.
Craig Stenton: at 11:42:44
Are you still there Ethan?
Ethan: at 11:43:46
Sorry, I was taking to another customer online.
Ethan: at 11:44:54
Could you please provide me the file name of your installation media?
Ethan: at 11:47:34
Excuse me, Craig, are you still with me?
Craig Stenton: at 11:47:41
Yes I am
Craig Stenton: at 11:47:56
Do you mean the file that I downloaded from technet?
Ethan: at 11:48:09
Yes, you are correct.
Craig Stenton: at 11:48:40
en_windows_vista_x64_dvd_x12-40712.iso
Craig Stenton: at 11:49:12
I understand that this is not Vista Business, which I queried in my chats yesterday and I was told that it is the same media and should be ok
Ethan: at 11:52:13
Yes, the media contains Windows Vista and other editions. Normally, you may just claim a product key for Windows Vista Business, then you can install Windows Vista Business on your machine.
Craig Stenton: at 11:54:14
OK, so can you help me with that please?
Craig Stenton: at 11:54:42
It seems that I have the correct media, and my product key is valid so there shouldn't be any problems
Ethan: at 11:57:21
In that case you may call your regional Activation Center for further assistance. Please give me a moment to locate the contact information of the Activation Center in the UK.
Ethan: at 11:58:25
Thanks for your waiting. You may refer to the following KB article to learn how to contact Microsoft Product Activation Center for your region:
Ethan: at 11:58:25
http://support.microsoft.com/kb/950929
Ethan: at 11:58:25
(Or you may enter “SLUI 4” in “Run” to check out the number of every region in the world)
Ethan: at 12:01:04
Excuse me, have you received my above messages, Craig?
Craig Stenton: at 12:01:54
Yes I have
Ethan: at 12:02:41
Is there anything else I could do for you at this moment?
Craig Stenton: at 12:02:59
yes
Craig Stenton: at 12:03:12
just bear with me
Craig Stenton: at 12:05:06
I have done what you said and when I call the number it is an automated system that requires numbers from the activation wizard. I can't ebven install thde software to be able to get to that stage. I need my product keey to be made to wotk with the downloaded
media, or if it can't be made to work then I need to be supplied with a product key that will work
Ethan: at 12:07:18
Please give me a moment to check it for you.
Ethan: at 12:12:07
Thanks for your waiting. Have you tried the following steps?
Ethan: at 12:12:07
To activate Windows Vista over the telephone, follow these steps:
Ethan: at 12:12:07
1. Click the Start button, and then click Computer.
Ethan: at 12:12:07
2. Click System properties on the toolbar, and then click Click here to activate Windows now in the Windows activation area.
Ethan: at 12:12:07
User Access Control permission If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
Ethan: at 12:12:07
3.The Windows Activation Wizard starts.
Ethan: at 12:12:07
4.Click Use the automated telephone system in the Windows Activation Wizard.
Craig Stenton: at 12:13:04
but I can't install windows! During the install I am asked for the product key and it tells me that it is not valid and so I can't proceed.
Craig Stenton: at 12:14:16
I can't use the usual methods of activation because I cannot get an activation code. I can't use the activation wizard. I can't call the number because it requires an activation code.
Craig Stenton: at 12:14:35
I am completely stuck without somebody making it work.
Craig Stenton: at 12:16:01
We've established that everything is correct so what is the problem?
Ethan: at 12:18:45
Okay, then you may post this issue on our support forums for further assistance from our support engineers. One moment please, let me locate the entrance for you.
Craig Stenton: at 12:20:09
But surely it isn't a support issue. It is a product key issue.
Ethan: at 12:21:03
Windows Vista Activation
Ethan: at 12:21:03
http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=itprovistasetup&filter=alltypes&sort=lastpostdesc
Ethan: at 12:24:45
But your product key is valid, and the media is correct. You may post your issue on the Windows Vista Activation forum to see if our support engineers have any solution on this issue.

Craig Stenton: at 12:13:04
but I can't install windows! During the install I am asked for the product key and it tells me that it is not valid and so I can't proceed.
Craig Stenton: at 12:14:16
I can't use the usual methods of activation because I cannot get an activation code. I can't use the activation wizard. I can't call the number because it requires an activation code.
Hi,
I'm a bit confused with this paragraph, as you said Vista already install on your computer, why did you say Windows can't be installed?
According to your description with your problem, it is Product edition and key are not match. Firstly of all, we must make sure the system you installed on your computer was
Windows Vista Business, not matter 32 or 64 bit.
Note: you can check current system edtion at System Properties.
After that, you can try to input your product key and activate your system for test.
If problem still presists, it would be better to provide the activation error message.
Roger Lu
TechNet Community Support

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Can't activate Windows Azure from my MSDN subscription benefits

I'm a Microsoft Student Partner, and I'm supposed to be able to activate Windows Azure without having a credit card.
I tried to activate Windows Azure from my MSDN subscription benefits,but I get this error message:
Oops!
VISUAL STUDIO ULTIMATE WITH MSDN IS NOT AVAILABLE.
This offer is only available to MSDN subscribers.The problem now is that I can't even contact Windows Azure support and I have a web page having the following error message : "We were unable to find any subscriptions associated with your account"How can I do to activate Windows Azure, Can you please help resolve this, thx.

hi,
Did you want to use benefit for Visual Studio Ultimate with MSDN from error message? I got this message "THIS OFFER IS NO LONGER AVAILABLE TO NEW SUBSCRIBERS. EXISTING SUBSCRIBERS ARE ABLE TO CONTINUE UTILIZING THIS OFFER"
from this page "http://azure.microsoft.com/en-us/offers/ms-azr-0049p/#header-0
".Also, I suggest you could contact azure support form
http://azure.microsoft.com/en-us/support/options/ .And you could select "Having issues with sign in or signing up for an account?". It is free and It may be the best choice for you. Please
try it .
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't activate Windows 7

I installed Windows 7 Pro 64bit via Boot Camp, with a genuine product key (I got a copy free through a student programme at Uni).
Everything has worked fine for months, but a few days ago Windows started trying to activate again, and now it can't, saying error "0xC004c020 - The activation server reported that the Multiple Activation Key has exceeded its limit".
As far as I can see this is effectively telling me this copy of Windows/product ID has been activated too many times - problem is, I've only ever reinstalled once, after Apple had to replace the HD in my MBP under warranty.
It's definitely a genuine product ID, and it's tied to my .ac.uk email address - it's not as if anyone else has the same ID, and I haven't shared it with anyone.
How many times SHOULD I be able to activate Windows? It's not my fault if I have to reinstall <x> amount of times due to faulty hardware, surely?
The only thing I can think that may affect it is that in OS X I run VMWare Fusion, and sometimes use that to boot my Boot Camp partition as a virtual machine, but I'm not sure why that would cause activation issues? Remember my problem here is not that I couldn't activate at all, it's specifically that Windows thinks I've activated too many times.
Thanks a lot.

Unlimited unless the motherboard is changed, possibly.
There have been problems once in awhile with the servers.
Also, EDU copies had to be burned at 2x if using Apple DU to burn, or use a PC, or purchase physical media for $15 extra.
Maybe that has something to do with it. Or the school is at fault.
Windows 7 SP1 does impose stricter conditions. Have you asked or sought help with VMware? The MS EULA and using a single activation for both physical install and VM has always been or seemed 'iffy.'
Maybe an update to Fusion Tools?

Can't Activate Windows Azure from my BizSpark MSDN account, can you please help?

Hello there,
I have a BIizSpark MSDN account and I am trying to access Windows Azure but it is not allowing me.
From MSDN, when I click on "Activate Windows Azure" then I receive a form, there I enter my phone number for mobile verifications,
then I receive the message "We were unable to verify your account." and this message I receive if I select send me a message or call me.
From MSDN, when I click on "Go to the Windows Azure Management Portal", then I receive a new page with a grey box with the title "We were unable to find any subscriptions
associated with your account.". I would greatly appreciate your help.
Thank you in advance.

Hi,
About this account issue, I suggest you contact with Azure support, it's the best choice for you.
Please contact support team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/
Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't activate windows 8 in Lenovo T430

Hi, My machine was working fine but suddenly I am unable to activate windows 8. It says error code is 0x8007007B. error description: The filename, directory name or volume label syntax is incorrect. Please help me to solve this issue. thank you.

Am I correct in assuming that this machine originally had Windows 7 installed? If this is the case, take a look at this thread. There are instructions in the marked answer that might help you.
If you got the computer with Windows 8 installed, then you will need to run Belarc to get the key. It is listed about 1/4 of the way down.
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Windows Storage Server 2008 - unzip with drag & drop from Windows 7 client fails

Hello.
As i asked this question in German and got no answer so i try it in English now.
I have the following problem:
We have a Windows SBS 2008, where we store our files. If somebody opens a ZIP-file on a network share from a Windows 7 Client (64 Bit) it is possible to drag & drop the content (multiple files) to a directory. So far everything works as expected.
We now have an additional Windows Storage Server 2008 integrated in our domain (Buffalo Tera Station WS-QV8/R5), where we also store files. If somebody opens the same ZIP-file on a network share of this server from a Windows 7 Client and tries to drag &
drop the content the following happens:
1. only one file is extracted and to display the file a refresh of the explorer view is needed.
2. when the drag & drop action is repeated a second file is extracted
Not alle files are extracted and there is no error message or indication why this happens.
The behaviour is reproducible from another Windows 7 Client (32 Bit).
If we try to drag & drop the files from the ZIP-file on the Windows Storage Server network sahre to a directory on the SBS network share all files are extracted correctly.
On the Windows Storage Server itself all files are extracted without problmems. Therefore it must be a problem with the combination of Windows Storage Server und Windows 7 Client accessing the files via network shares.
Are there any ideas where this problem could be located? Has anybody the same phenomenon and maybe a solution for it?
Thanks in advance
Michael Pruss

Hi Michael,
Thank you for clarifying the issue for us.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Regards
Kevin
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.

Can't activate windows after hard drive failure.

I'm attempting to revive a less than year old laptop for a friend after a harddrive failure.... toshiba drive was dead dead.
Has a windows 8 sticker on bottom so can only assume that's what it came with, but windows claims the product key stored in bios has been blocked and will not activate.
Have tried 8, 8pro and 8.1 with no success. is it possible this machine came with the "Bing" version of windows?
Owner is not computer savy so can't believe he did anything to alter the slic table in the bios...... even flashed it with the latest bios version with no change.
After googling the product key that comes up "xky4k-2nrwr-8f6p2-448rf-cryqh" using more than one product key tool, seems its listed all over the internet. Is this what should be on this machine?
Thanks for any help.
This question was solved.
View Solution.

Hi:
You have to use W8.1 OEM installation media.
Anything you can find on the internet is for retail versions of W8/8.1.
You will need to either get your hands on the above media or order a set of recovery disks from HP.
To order recovery media, click on the link below, select the W8.1 drivers and then click to expand the line labeled Order Recovery Media.
http://support.hp.com/us-en/product/HP-15-g000-Notebook-PC-series/6545564/model/6761879/drivers
Why didn't your friend contact HP to get this matter taken care of? Wasn't the notebook still under warranty after less than a year?

Can not activate windows 8 on my HP Envy laptop

Hi guys,
Im not sure if this is the right forum topic to paste this on so I do apologise. I have recently done a full restore to factory settings however, I can not seem to activate my Windows 8. I have been able to update my Windows to 8.1 through the microsoft store but it still does not let me activate and says the key I already have does not work. I've tried going through microsoft website for help but I have had no luck. Any help is much appreciated. Thank you.

Hello irregularfade,
Welcome at the HP forums,
Which version of windows 8 did you have when you bought the laptop?
Windows 8.0
Windows 8.0 Pro
Windows 8.0 Mediacenter
Windows 8.1
Windows 8.1 Pro
Windows 8.1 mediacenter
Windows 8.0 RT
Windows 8.1 RT
And can I have the excact model number of your laptop?
http://h10025.www1.hp.com/ewfrf/wc/document?cc=nl&lc=nl&dlc=nl&docname=c00033108
Winos.
The doors of wisdom are never shut. Benjamin Franklin
We must use time wisely and forever realize that the time is always ripe to do right. Nelson Mandela

Can not activate windows 8

i bought HP Pavilion G6-2301AX about 1 year ago, now when i start my laptop it ask me for windows activation. and when i will try to do that i get this ...
" Error Code:
0xC004f074
The Software licensing Service reported that the product could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information.
please help me.............

This error code appears only during the time of activation when the Software Licensing Service reports that it cannot activate the product key since the Key Management Service cannot be contacted.
1) Start -> Run ->Type Slui 3 (Slui 4
for activating by phone)
2) Enter Product key
3) Click Activate
S.Sengupta, Windows Entertainment and Connected Home MVP

Windos 2008 KMS host can't activate Windows 8 clients

Similar Messages

Maybe you are looking for