Window 7 and CS2

is cs2 compatiable with windows 7

The XMP thumbnail is probably what is getting used in this case. Even for images saved without Maximize Compatibility, the Ardfry PSD Codec can use the image in the XMP for the thumbnail if it's present. Recent versions of Photoshop allow you to choose whether to save a thumbnail image independently of whether or not Maximize Compatibility is set.
However, larger thumbnails and viewing a large image in the preview pane (as well as Windows Photo Viewer and Windows Media Center) are dependent on having the flattened image available. The same behavior is found with Preview on the Mac.
If any bit of your workflow is non-Adobe, then setting Maximize Compatibility is probably a good idea.

Similar Messages

Install Acrobat 7 and CS2 applications - running Windows 2000 and IE 6

need to install replacment Acrobat 7 and CS2 applications - running Windows 2000 and IE 6. Any problems with this?

http://web.archive.org/web/20070203090721/http://www.adobe.com/products/creativesuite/syst emreqs.html

CS1 and CS2 InDesign file type problems and Tiger

Dual 2.7GHrz G5, 2GB RAM, OSX 10.4.5
Previously, InDesign 3 (CS1 version) was installed on this Mac. I needed to install the full CS2 package. Everything installed just fine. The problem I am having is the file type associations. The Mac now sees CS1 InDesign files as Indesign CS2 files. I got info on a file I knew to have been created and saved in InDesign CS1. I changed the "open with:" to InDesign CS and it worked until I hit "Change all". It then reverts back to a CS2 file type. On other sites I found some different things to try like rebuilding or deleting the LaunchServices pref files, checking to see if their was a CFBundleIdentifier, etc. Anyway, what I seem to have found is that Tiger gets confused when the Type and Creator are the same in the info.plist files. Panther, however, does not seem to have this same problem. We have 10+ other G5's of similar hardware specs as the one listed above, running Panther 10.3.9, have CS1 and CS2 installed, and we are not having the same file type problems.
As a test, I modified the CFBundleIdentifier to be different than the one found in the CS1 info.plist, and it let me "change all" the CS1 files to CS1. Of course, CS2 files could not be associated with CS2 now.
Is there a fix for this? Or, is there a patch being worked on that will fix this problem? We really need to keep both versions of the software installed, and I don't want to have to rely on users making the decision about what version they are working in.
Tom

If Get Info shows both app versions (& it should) as "Open with:" choices, you can at least still set individual docs to open with the preferred version. Instead of having to open Get Info windows, you can do the same thing a bit more easily with the contextual menu that pops up when you right (or CMD) click & hold on a Finder document icon.
Normally, the "Open with >" choice in this menu is a one time thing, but if you hold down the option key, it changes to "Always Open With >" & makes the new app choice permanent as it opens the doc, all in one step.

My new Canon MarkIII and CS2 are not compatible...

Hi - I wish I could go into a camera shop or an Apple shop to get this sorted. But there are none where I live so I hope someone can help me. I have a legal version of CS2 and use a G5 mac. I'm a professional photographer and I want only to open my RAW pix in PS without converting via Digital Photo Professional or anything else. I never have my G5 hooked up to the internet and therefore have not imported latest versions of anything. I have tried an illegal CS3 and that cannot open my RAW files either so I am loathe to buy a legal version if it does not solve my problem. While I know both my camera and CS2 back to front I am not a computer geek. I have had a look through the forums but cannot find any answers. Chao and thanks. H

Adobe doesn't offer "forever" support for new cameras, except for offering an ongoing update for their DNG converter. So, to get your canon raw files to open with CS2 you need to download the most recent version of ACR+DNG. See:
http://www.adobe.com/products/dng/
I cannot help too much, being more familiar with Windows, but the DNG converter does not need to be installed - it just simply works by pointing it at a folder of raw files.
The version of CS3 you tried probably didn't install with the most recent version of ACR, which is why it didn't work with your Canon files. ACR v4 is much improved over v3 - you might consider CS3. Another option, for approximately the same price of upgrading to CS3, is Lightroom (v2 in beta test). It offers a slightly different approach to digital photography that includes a library (i.e., database approach as opposed to Bridge's "browser" approach).
HTH :)

Intel and CS2

I am having a problem installing a legit copy of Adobe CS2 on my iMac. The installation seems to run very fast (too fast), but when I go into my applications folder, no adobe apps can be found. I have tried running the installer multiple times and have managed to correctly install bridge and photoshop once, but nothing else. I am sure it is a full version and that it is a mac version. any help would be appreciated.
thank you

Same problem when I called Apple, I had to ask for a level 2 tech right away since the first person had no idea what I was talking about when I said I wanted to uninstall the recent 2006-003 update and her accent was very difficult to understand since I have a slight hearing problem.
Anyways, I am new to Mac computers, I am a long time Windows and Unix Admin, and multiple flavors of Linux for certain services. We were told we had to buy these Imac machines because we were bought out and the new company said we had to use macs, because everyon that does printing uses macs, I begged not to get the intels because of having to use Rosetta, but they would not listen, I almost quit over the ordeal since I was basically threatened and told to keep my mouth shut.
Regardless of all that, I am the one working countless overtime to get these Imacs working again. I ran into the problem when I did the 2006-003 security update. I tried an archive install which would not even finish, kept hanging on iweb. So I did an erase install, then installed Indesign CS2, and did not install the version cue, since I was already aware this was a problem. I then started updates one at a time, and tried created a PDF after a restart after each install. I did the quicktime install 7.1 first, worked no problem, and could make PDF's still, I did the 10.4.6 update and rebooted tried to make a pdf with acrobat and system hung. Restart in safe mode and remove the cache from library\caches\ and then reboot and as soon as I open acrobat the system hangs. Everytime I remove the cache I can then reboot normally until I open Acrobat.
I have noticed in my short time with Apple, that when something does not work, all I hear is that "well that isnt our problem, you should call adobe" or whoever the other program is. The plain simple fact, is that adobe is not the only program having problems, apple remote desktop is also having problems, and safari, and others, just search the message boards and you will see, but Apple refuses to resolve the issue, but if you dont install the update, then your system is open to security problems.
The fact that I can not just uninstall a secuirty update is unbeleiveable. The Apple level 2 tech told me that MOST updates including all security updates could not be uninstalled, you either had to archive or erase install the system to go back.
I think the Apple OS is great, but they should test products with their largest vender, Apple before putting out these intel Imacs, or security updates that cause problems. If Windows did this, Man everyone would blame Microsoft right away, but if it is apple, you end up with a apple community that is so defensive they will just say, well its not our fault its the program. Well guess what, a system without any programs is not very useful.
This whole mindset that I get from the other plants that windows crashes and I hear them joke about the blue screen of death and garbage like that is rediculus. I havent seen a blue screen since windows 98, until after the apple update that gave me the blue screen, and all the talk about how insecure the windows machines are. They are only insecure if an admin doesnt do his job. If he allows users to be administrators or doesnt do any updates for 6 months. I have numerous windows machines on this network and they run flawless, no virus, no spyware, no problems. 5 Windows servers, and 25 linux boxes running as thin clients booting to a windows XP remote desktop. I have had to tell people how to restart their computer since they forget and leave them running constantly, of course, I network boot them and restart for needed updates, but they forget how, because XP is solid.
So, sorry for the rant, but basically this is not acceptable for Apple. They need to fix their product and take responsiblity for problems, if they want to gain market shares above what they have, they will run into the same problems as microsoft, and they will be forced to make there machines run with certain required programs.
So, does anyone have a fix for this problem, besides dont use acrobat or dont install updates?

CS3 and CS2

I was searching forum and read that it may be an issue with installing CS3 and CS2 on the same computer. Can someone confirm this for me as true.
Thanks,
Tim

Never had any problem at all, although (disclaimingly yours) YMMV.
I should mention that my experiences are based on chronologically installing CS, CS2, and CS3,
i in that order.
(It might be important -- perhaps someone with lots of free time can experiment with different install orders.)
As the file extension for all three versions is the same (".indd"), Windows cannot link files made with different versions to their original creators, and using the Explorer, the latest installed version will lways open. However, each separate program can be started manually, and can open its own documents and older ones w/o any problem at all.

How can I stop CS and CS2 from immediately closing on Vista

I have been using my CS and CS2 Photoshop versions, that I originally used on 2 Windows XP computers, on Vista for one year.
When I installed CS2 on my 2 Vista computers a funny glitch would appear, a registration pop up would always appear
I could just click on the register later button and the pop up would go away and I could use CS2 with no problems
All of a sudden in the last month or 2 they CS2 closes right after I get rid of the registration pop up
Now I cannot use either of my Photoshop CS
I have tried registering CS2 when the window appears and the program closes when I hit enter
CS just loads and then closes right after that
I had them on older computers using XP and I can't remember if I deactivated my 2 licenses.
The only program I can get to work is Photoshop 7 (probably because it predates activation protocols)
Can someone help me with this recent problem I would much appreciate it

Since you can't remember if you deactivated and the programs are closing it would be safe to say you did not deactivate.
Registration and activation are two different processes.

Open discoverer report in new browser window and without connections page

Hi All,
We are using Oracle 11g Discoverer 11.1.1.4. Requirement is to open the discoverer report in a new browser window and without connections page.
When we are running discoverer reports with this parameters we unwantedly get the connections page of the discoverer plus which we don't want.
Went through the documentation given in this page and followed it still the issue persists, and i see couple of threads with my issue and no updates.
This excerpt is from the documentation available in the link
" _plus_popup=true and framedisplaystyle=embedded launches Discoverer Plus in a new pop-up browser window that contains the Plus applet embedded in it "
http://www.art2dec.com/documentation/docs/oas10g1012/linux/bi.1012/b13918/urlstart.htm
and Here is what we use to invoke our reports.
http://ipaddress:port/discoverer/plus?cn=cf_123&_plus_popup=TRUE&framedisplaystyle=EMBEDDED&wb=disc_wb_1
Request the forum users from PRO discoverer group to help me out of this issue and expect a good discussion on this.
Thanks in advance

Closing the thread
We were able to achieve by changing the browser settings in the IE 8 Browser. Disabled Tabbed browsing.

New ipod seen in windows and itunes but not in sync diagnostics

I bought a second Ipod. Oldest one works fine. New one is seen in Windows and in ITunes. Diagnostics "finds" new Ipod, but on Sync diagnostics says "no Ipod found".
Ne Ipod looks like it's staring to sync, then just stops after 30 seconds and goes to "connected" screen.
Have done resets of Ipod and reboots of PC.
Driver shows no error in Device Manager.
Have tried three differenct cables and both USB ports on the pc.

I jus tried that. Computer acknowledged Ipod and Itunes performed restore. Afterward, same situation...no sync. Screenshots:

I wonder to know what is the enterprise solution for windows and application event log management and analyzer

Hi
I wonder to know what is the enterprise solution for windows and application event log management and analyzer.
I have recently research and find two application that seems to be profession ,1-manageengine eventlog analyzer, 2- Solarwinds LEM(Solarwind Log & Event Manager).
I Want to know the point of view of Microsoft expert and give me their experience and solutions.
thanks in advance.

Consider MS System Center 2012.
Rgds

Want to use a Lacie External Hard Disk with Windows and Mac? Can I?...

Hi, I've just purchased a Lacie Extreme D2 external hard disk, I'm looking to use it to move film clips from my Mac G5 to my Sony Vaio laptop. I'll connect the Mac using Firewire 1 and the PC using USB 1.
I understand there is an issue with setting the compaitibility of the hard disk to either Mac or Windows format but I'm wondering if I can set it to both, so it's possible to transfer these files? The hard disk is Windows and Mac compatible but does it have to be partitioned a certain way?
Any help is much appreciated.
Thanks,
Alex

Format the drive as FAT or use the Mac format (HFS Extended) and install MacDrive on the PC.

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How do I install windows and bootcamp on my macbook Air

Hi
I need to install Windows and Bootcamp on my macbook Air, due to a software tool a customer needs that only runs on windows.
The initial instructions say I cannot do this with a remote DvDplayer,
Who has experienced this?
Chris

http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

[SOLVE] Dual Boot Windows and ArchLinux with Syslinux

Ok, i installed ArchLinux on my laptop with Windows XP (syslinux) and I cannot find get Windows to boot or mount it. I have tried to do what i can to do this but cannot. I Installed XP first like a should and something i think might be needed to know is after i created the partitions scheme (10Gb (boot partition), 50GB (XP), 80GB(was unallocated)). The installation disk formated both 2 partitions in NTFS but i installed XP on the second and Windows reported them as C and D drives. Windows being D. Thought that was bit werid thinking Windows installed the mbr on that partition. When I installed ArchLinux, it did have the boot flag set on 10GB (or C drive).
Since I installed ArchLinux, I have been unable to find a solution to mounting/booting to Windows. Installed NTFS-3G and that didn't work when i tried mount /dev/sda3 windows and i did created a folder named windows but got ...
mount: wrong fs type, bad option, bad superblock on /dev/sda3,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
Tried dmesg | tail and got
[ 76.524133] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 179.468499] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_DEVICE_CHECK event: unsupported
[ 705.472330] 8139too 0000:02:03.0 enp2s3: link down
[ 717.380879] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 726.447184] 8139too 0000:02:03.0 enp2s3: link down
[ 727.596128] ACPI: \_SB_.PCI0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported
[ 732.616138] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 733.848832] 8139too 0000:02:03.0 enp2s3: link down
[ 834.062062] 8139too 0000:02:03.0 enp2s3: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 2131.449211] perf samples too long (2534 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
This is when i run sudo lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 149.1G 0 disk
|-sda1 8:1 0 9.8G 0 part /boot
|-sda2 8:2 0 1K 0 part
|-sda3 8:3 0 53.6G 0 part
`-sda5 8:5 0 85.7G 0 part /
sr0 11:0 1 1024M 0 rom
My syslinux is
LABEL arch
MENU LABEL Arch Linux
LINUX ../vmlinuz-linux
APPEND root=/dev/sda5 rw
INITRD ../initramfs-linux.img
LABEL windows
MENU LABEL Windows
COM32 chain.c32
APPEND hd0 3
NOTE: chain is in the same directory with syslinux
I really think Windows got corrupted but not sure. Thought about repairing the mbr on windows and booting to it then reinstall syslinux but really don't want too.
Thanks in advance
Last edited by jag-ster (2014-11-27 02:12:12)

Here is the partition table:
/dev/sda1 one HUGE linux /boot primary partition (assuming ext4)
/dev/sda2 "name" of the extended partition
/dev/sda3 primary Windows partition (assuming NTFS)
/dev/sda5 logical Linux root partition (assuming ext4)
/dev/sda1 to /dev/sda4 are either all primary, or three primary and one extended. After /dev/sda4 all partitions are logical. If you're still wondering why is there no /dev/sda4, it's because you have 2 primary and one extended, so /dev/sda4 is reserved for another primary partition.
Windows problem:
The /dev/sda1 which Windows named C: is Windows equivalent of linux /boot. When you told linux to place its /boot on /dev/sda1 it formated boot files of Windows. Now you have Windows OS with no kernel. In other words there is no way to boot Windows if you don't reinstall it. Actually there is a way, but you would than screw up Arch.
Mounting problem:
You can never mount extended partition, only logical (an extended partition is made of logical partitions). You want to do:
sudo mount /dev/sda3 -t NTFS-3g -o rw,uid=YourUserName /path/where/you/want/this/partition/mounted
EDIT:
Try it this way:
- Backup all your data
- Delete every partition
- Start Windows installation
- Make only one partition (c:/ for Windows)
- Let Windows make another partition
- Make one more so you could have a data partition, which does not need to be formated to reinstall Windows
- Start Arch installation
- Get to partitioning
=Partitioning=
- /dev/sda4 extended (take the rest of the drive)
- /dev/sda5 logical /boot 512MiB
- /dev/sda6 logical / 20GiB
- /dev/sda7 logical /home (the rest)
Making a separate /home partition will come in handy when reinstalling Arch (any linux distribution), or switching between distros, because it is the equivalent of D:/ in Windows. Also consider LVM.
Last edited by bstaletic (2014-02-28 23:25:33)

FIREFOX 26 changed the 'post crash' page with the list of windows and pages. It was a real HTML page with links for each page. Now it isn't (and blows)

* You changed the page that comes up after a crash - the one which shows the windows and pages that were up before the
crash.
This used to be a real HTML page and it isn't any more. THis choice was pure isiocy consider how peopel used that page every day (try taking to your users for a change).
The pages listed on that 'post crash page' used to be actual LINKS (you could right click them &
manually open them in another tab - and most peope DID that every day). You could also (and I did this a lot) drag a second
copy of the page, into a new tab (to keep track of all the pages I had not wanted to open)
Now the pages are no longer links. You cannot right-click them.
The thing in the probser is no longer a page that I can drag into a new tab.
Roll the version back and throw this one in the bin...and have a good long talk with your developers about the definition of
'STUPIDITIY'
Then I try to type anything in the addres bar it is suppose to repoond with the history of old things I have types in the past, or
search for what I type (and in some cases I think it tyes to convert it intoa URL). However it no longer does any of these
things. When I type in the ADDRESS BAR ONLY, I do not get all of my letters to appear. I have to type into a notepad or
into the search and to copy and paste to go to a URL. Nothing that is typed into the address bad responds normally at all
anymore, and I am fairly certain there are no new addons on this machine at all. It does not matter which things I disable. It
still does this. W of course points the finger back at a change to FIREFOX. I wich I could just sitct with one stable release
forever but the MOZILLA folk thing it is best to force peopel awy from a working broswer release to a horrible one (due to it
being out of date).
FIREFOX 26.0 has 'issues' (ie new *features*/bugs)
1) History is no longer accurate. My Proof? This machine is the primary one for the entire family (the only PC working). It is
logged in with same user every time and never has its history cleared. It now January 7 so I ought to have a list of all of last
months browing available to me.
However, according to FIREFOX history, in all of December 2013, the entire family only went to 51 primary URL's. None of
the official TV sites I use to get episodes are listed. None of the official movie sites I use are listed. The primary URL for
ebay is not listed. Only 1 out of our 4 weather sites that I use (at least once a week) are listed. Only 1 of our 3 FINANCE
sites is listed. There ought to be several; hundred root URLs listed.
Please fix history as this change seriously "blows greasy chunks"
PROBLEM (a stupid change in the new FIREFOX version)
FOr a long time, after a crash you got a useful page (a real HTML page) which gave you a list of all of your last sessions
'winwos and tabs' that were open when the browser crashed. there were certain ways of using this page that are no longer
able to be done.
The old method was wonderful as it had this behavior :
*** The old method for displaying your 'Recovered Tabs' allowed you to :
a) right click an individual item and open it in a tab without getting rid of that lovely window of your previous session of
'recovered windows and tabs '.
2) drag the URL for the entire window of 'recovered windows and tabs ' to a new tab (to make a second copy) so that you
could select just a few of them to open as a group, and stil have the old list handy.
You can no longer do either of these things. The 'recovered windows and tabs ' page no longer has links in it and can no longer be dragged, so you cant select a few of them to use, and keep the rest around for later. NOW - once you choose which pages to open the window is gone forever (can can't get a second copy).
People used to make a copy of the page for later use (with a drag)
we also used to open pages with a right click (which no longer functions
This new method seriously blows big greasy chunks. A parge loss in function has occurred.
Put things back as they were. 26 is full of terrible changes that NOBODY likes. It also has a lot of bugs (history is not reliable at all)

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

A Cloud subscription provides for installing working installations on two machines. You can have mixed operating systems (both Windows and Apple's OX).

Window 7 and CS2

Similar Messages

Maybe you are looking for