Window 7 with Time Capsule

I keep getting an error (86) when I try to connect my Time Capsule with my PC that's using Window 7!
The error message keeps telling me that the password is not correct.But the Time Capsule is working fine with my Mac Pro and another PC that's using XP.This means the I can locate my TC disk with my Mac Pro and the PC with XP...but not on the Win7 computer!!
Does Win7 works with Time Capsule or not......I've read many info in this forum about Win7 and Time Capsule...but it's kinda confusing...cos it just seem like Win7 won't work wit TC......
Any conclusion or solution on this ...many thanks!!

a disk image of the backup on my desktop which disappears when Time Machine is finished
Yes, that's normal, TM only need to mount TC during the backup, it will be unmounted after backup is complete.
Plus there is only one file on the Time Capsule drive called XXX.sparsebundle
That's again correct. The file structure of the TM+TC backup is different to the TM+External HD. The sparesbundle is specially designed to be mounted over network, and the name of the sparsebundle file contains the MAC address of the computer that's created it. So that it can be identified by TM later.

Similar Messages

My start up disc is full i have a macbook air, i back everuthing up with time capsule and have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"

my start up disc is full i have a macbook air, i back everuthing up with time capsule and have movies all my music libraries and photos onto that too so as i have free space, but my max still says my startup disc is full with "other"

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight as described here. That method may not find large folders that contain a lot of small files.
You can also use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

Using Airport Express as separate wifi network vs extender with Time Capsule?

Hello all. I recently converted my home computer network from Windows/PC based to an iMac with Time Capsule. On my previous setup, I had a Cisco/Linksys router with wifi, and I also had two Airport Expresses in separate areas of the house where the Linksys had a weak signal. Obviously, I had the Airport Expresses set up as "separate" wifi networks, as they could not be used as network extenders with the Linksys. This setup seemed to work really good, as the 3 wifi networks provided good blanket coverage in all parts of the house. Each network also seemed to "hand-off" to the other pretty well, meaning that Airport Express 1 would show as the active network when you moved far enough away from the Linksys (or insert any of the network names here, even though I'm pretty sure that the device accessing the network has more to do with this than the networks themselves). In particular, the speeds that I got from the Airport Expresses actually eclipsed the speeds that I would get from the Linksys wifi.
My issue is that after I converted everything, I left the Airport Expresses as "separate networks" and essentially removed the Linksys/Cisco router and replaced it with the Time Capsule. So I still have 3 separate wifi networks, just like before, with the Time Capsule network taking the place of the Linksys wifi network. While the Linksys and the Airport Expresses seemed to co-exist together nicely, I get the feeling that the TC and the AEs are somehow working against each other or at least competing with each other for bandwidth. For example, if I have my iPhone right beside my iMac and TC, and I run a speed test on the iPhone using the TC wifi network, I get download and upload speeds in the range that I am expecting (30-40 mbps download). However, when I walk down the hallway to the other end of the house, the TC tends to remain the dominant wifi network, even when I am in the same room with one of the AEs (this is where they used to "hand off" nicely between networks). When you run a speed test in this location still on the TC wifi, the speed drops down to 5-7 mbps, and worse, I believe the signal becomes inconsistent because webpages and data often seem to be freezing in the middle of downloading. I understand that the distance from the TC is causing this, because my solution has been to manually switch from the TC to the closest AE, and that fixes the issue. Run a speed test after I manually switch to the closest AE when I am in the same room as an AE, and the speeds pop back up to 30-40 mbps.
My question is this: would switching the AEs to "extenders" of the TC wifi network help this issue? Honestly, my laziness was one reason that I did not do this when I setup the TC initially, because I have several devices that access the AE wifi networks that I'd have to update with the new network name and password. Everything was working great before, and I just didn't want to upset the apple cart. But if I have created an unfriendly environment between the TC and the two AEs, I certainly have no problem making the change now. I just wasn't sure if making this change would fix my problem or not. I know it's a mundane thing, but I'd like to be able to roam the house without continuously having to manually switch between wifi networks to get a consistent signal.
Sorry if this is a simple issue. I am admittedly a newbie with the TC and its interaction with the AEs.
Thanks in advance!!

It is not a simple issue.
Exactly which method works best is going to take some experimentation.
The way you are trying to set it up as a roaming network is generally considered the best.. but the devices like iphones do not hand off neatly.
It is interesting that they in fact used to hand off better using the Linksys.. which could be due to its poorer range. The new TC having so much better range is causing the phones to not swap "towers" to the local express.
Test it with a Mac laptop.. as generally they do hand off better.
I cannot quite figure out if you are using roaming correctly. All the wireless should have identical names, with identical security setting and passwords.
The only thing that should be different is wireless channels on each item. And you are likely just using auto anyway.
So each device is creating a wireless network. And for 2.4ghz one should be channel 1, then another channel 6 and another channel 11. For 5ghz it will be same idea but there are more channels available.
When you extend wireless, everything runs the same channel. But the wireless speed is reduced. You must disconnect ethernet to each of the expresses.. and the problem is your 30-40mbps will reduce permanently to 15-20mbps for all clients. So take your choice.. 15-20mbps for all clients forced to double hop is better than 5-7mbps which you experience now when you walk around.. although I am not sure how much browsing you do whilst walking. You may need to compromise which is the better out of several not great alternatives.
I would have a test.. which is wrong btw.. but I have heard that it works.
In your roaming network at the present time. Try setting each router to a manual wireless channel.. and fix all of them the same. So for instance, set 2.4ghz to channel 11. Try fixing the 5ghz as well, say the TC is defaulting to 149, it might not actually respond to manual wireless channels.. you will need to test this.. say set to 36 or 40 and see if the TC is actually changed.. if not just set all the expresses to 149 as well. What you are doing is trying to reinforce the wireless in each area.. but this is actually wrong. So all will have same wireless name and same security wpa2 personal is the only valid one.. and all the same password.
Test with a few clients and see if the results give you decent local speeds as well as better roaming.. once you decide which to do, then you will need to change all the clients.

MacBook freezes with Time Capsule

Hi all,
I switched from PC to mac and am very happy with that decision. I do have one recurrent problem, with Time Capsule and Time Machine and can't find anything in the manuals that tells me what the problem is.
My TC is not being used as a router, as my laserprinter doesn't have a USB, so I kept my wireless router to be able to continue printing from all machines at home and connected my TC to the router, giving it a fixed IP address within my home network. When it's on, it shows up in as a shard disk in finder and I can easily write files to it from all machines.
However, when I launch Time Machine, using the TC as the back-up disk, there is a small window saying "Connecting to server" and then my computer freezes and so does the TC so it seems. I've let this run for a couple of hours, but nothing changes. The only thing left to do is to turn off my computer.
I do realize that the above configuration is not what is recommended, and I assume there is some interference with the Airport trying to connect to the TC as well as to the router, even though Time Machine is set up with the TC with its fixed IP address.
I've been on the phone with an Apple person, but we were unable to fix this. I'm getting a bit desperate (and irritated) here. Any suggestions?
Thanks,
-Maarten.

Dear Bob,
Thank you for your answer. The procedure you suggested did work in so far as it found the disk and started the backup, but even if I had made a first backup on the disk a while ago (doing it with the disk directly connected to my computer as suggested by the Apple expert, rather than via the router), it took all night and still wasn't finished. The problem is that I cannot do anything on the computer while TM is running, programs will not start up, it even doesn't react to the keyboard. The only thing I can do is to turn off the computer. Given that I need my computer for work, I cannot afford it not to work
This is really frustrating: I know it should work (a friend of mine makes back-ups every hour with TM on a regular external disk, not a TC), and here I am with expensive (and nice) material, and it just doesn't work and I have no idea why.
Thanks again for any suggestion.
-Maarten.

Problem w/ wireless range with Time Capsule

Recently set up Time Capsule to swap out my Airport next to my Imac. Also have an Airport Express set up in another room to help extend wireless range. Found now that the range with Time Capsule is not as good as the Airport setup and I can't use my Ipad in the bedrooms furthest away from the Time Capsule. I'm not very tech saavy but would appreciate any suggestions? Thx.

When you set up TimeCapsule did you create a closed network? With a closed network, airport doesn't broadcast the network name, you have to manually enter it to join. This might be your problem. To fix it (or to see if that's what you've done) run Airport Utility and select manual setup. Select the Wireless tab and then click on the Wireless Options button at the bottom of the window.

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.

Can I use Extreme with Time Capsule to extend my gateway router and still use Capsule as "external HD"?

Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme. I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.

I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
The keys to having a successful roaming network are as follows:
The routers must be interconnected by Ethernet.
Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
The TC MUST be reconfigured as a bridge.
Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
The basic steps are:
Power-down the Winstream.
Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
Connect the TC to the Winstream using an Ethernet cable.
Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
Connect your computer to the Winstream's Wi-Fi network.
Run the AirPort Utility. select the TC, and then, select Edit.
Go to the Network tab.
Change the Router Mode option to: Off (Bridge Mode)
Select the Wireless tab.
Verify that the Network Mode option is set to: Create a wireless network
For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
For Wireless Password, enter the same password used by the Winstream.
Select Update and allow the TC to restart.
As far as your external HD, yes you should still be able to use it as before.

Can we share our photos in the family on different mac´s with Time Capsule?

Can we share our photos in the family on different mac´s with Time Capsule?

It depends on the size and number of photos you are sharing around.
Nothing wrong with putting a copy of the photos on the TC if that works for you. Each person can access the photo just fine like that.
I am not saying don't.. just beware of the risks so do it prudently..
But if the library is too large, you will steal space on the TC that should be used for backups.. if all the computers in the network are backing up to it, don't use too much of the spare space.
Better to buy a firewire drive (or USB but firewire 800 are much faster) and connect it to a computer that is regularly turned on. Share that drive to the network. It will then also be backed up correctly to the TC although again be careful of the amount of files, and still keep a straight copy backup somewhere else.
I am recent convert so workflow on the Mac is not my forte.. so perhaps some of the wiser heads can also drop in and post a reply.

Backing up Mac HD with Time Capsule AND an external hard drive

I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
Thanks.

Rheopaipo wrote:
I am sure that this question has been asked one way or another but I can't seem to find the exact answer.
I would like to back up my Mac HD with the Time Capsule AND another hard drive essentially to create two backups. Should one fail, I still have another copy as a precaution. The Time Capsule will be my primary back up because my external hard drive is usually switched off and will only be turned on from time to time to perform "less frequent" backups.
With Time Capsule AND the external hard drive on, will Time Machine just update the backup on the external hard drive without becoming confused with the other copy on Time Capsule? In other words, can Time Machine distinguish between two different Time Machine Backup files and bring them up to date accordingly?
I understand there is an archive function on the Time Capsule, which would also serve the purpose. However, I am wondering if there is another way.
I don't think it's possible to configure Time Machine to back up to two locations without modifying its settings frequently.
You might consider using that external drive to hold a bootable backup. You can create such a thing with either of the utilities SuperDuper! or Carbon Copy Cloner. If you pay the registration fee for SuperDuper! (~US$28), there's a mode where it will back up only what has changed, which makes the backup operation run quicker. (Carbon Copy Cloner may offer a similar feature.)

Setting up new HP Laserjet CP1525nw wirelessly with Time Capsule

Im having issues setting up my new HP Laser printer via wirelessly with Time Capsule. I have tried with the Wireless Client Setup
Assistant but cannot get it to work. Any help or suggestions would be appreciated. Thanks

I tried to get the CP1525nw set up on my computer here at the office and found, much to my chagrin, that the CP1525 is not supported under 10.7 and retroactively not supported under 10.6. The way that I have found to get around the issue is to connect it wirelessly via a static IP address and use a generic postscript driver. I'm hoping that they will release a driver to Apple soon, but until then, generic is the only way to go and I have not found any print quality issues.

Initial Time Machine Backup with Time Capsule

Hello,
I just started to back everything up with Time Capsule and Time Machine. The backup is 45 GB so it's going to take a while. Two questions:
1. There is a Volume created on my Desktop called "Backup of [My Computer Name]". Is this supposed to happen?
2. In the actual drive, there is a Sparse file, not the usual backups.backupdb folder that is created when attaching a drive via USB. Is this supposed to be like that as well?
Thanks!

Thank you for the response. I have a couple more questions.
1. Is there a way to manually go through the files? I used to be able to when it was backing up locally through USB.
2. If I change the folder name of the location of the Time Machine backups, do I have to start my backups all over again?
Thanks!

How do you back up an external hard drive with time capsule?

how do you back up an external hard drive with time capsule?

Will time capsule back up the machine and the hard drive that is plugged into the machine?
Yes, if the hard drive with the video files is formatted correctly for Mac
On the Mac with the hard drive connected....click on the Time Machine "clock" icon at the top of the screen
Click Time Machine Preferences
Click Options
Here you will see a list of items that have been excluded from backups
Click the name of the hard drive to highlight it
Click the - (minus) button at the bottom of the list to remove the hard drive from the list of excluded items
The hard drive will now be backed up with your Mac on the next pass that Time Machine makes

Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad "/Volumes/Data/MacBook Pro de Carlos.sparsebundle" ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

Hi, I have the following problem with Time Capsule: La imagen del disco de copia de seguridad “/Volumes/Data/MacBook Pro de Carlos.sparsebundle” ya está en uso. Please your comments to solve this problem, i can't made a backup. Thanks.

Try Here > http://pondini.org/TM/Time_Capsule.html
Perhaps P 2 > Time Machine could not complete . . . sparsebundle could not be accessed. (Error 109).

No internet with Time Capsule

I cant get internet through my time capsule. When i run network diagnostics, the network status says that:
Airport, Airport Settings, Network Settings and ISP are fine, but the Internet and Server have failed.
I use a cable modem from virgin media.

gareth1962jones wrote:
I've just installed time capsule with one airport extreme - which is all working fine except that I now can't get into the internet: somehow, I've ended up with two wifi networks - a new one one that the Time Capsule works with but no internet and one that connects me to the internet but not Time Capsule (the wifi network I had beforehand)
I've connected my original wireless modem to the Time Capsule via an ethernet cable. Airport utilities tells me this cable is not connected so I suspect the problem is something to do with that.
Do I need a wireless modem at all with Time Capsule?
Unless you expect problems with range, you might try replacing your AirPort Extreme with the Time Capsule. There are ways to get them to work together, but you'll probably be happier and have less hassle just doing the replacement.
I'd start by using the "Manual Setup" option of AirPort Utility to do a "File -> Save A Copy As..." of your existing AIrPort Extreme configuration. Then connect the Time Capsule in its place and use "File -> Import..." to bring your old settings into the TIme Capsule. There are probably some things you'll need to tweak, but the old settings will at least get you going in the right direction.

Window 7 with Time Capsule

Similar Messages

Maybe you are looking for