Window 8.1 device mdm enrolment issue

Window 8.1 device(Laptop and Tablet) doesn't shows the option of entering enrollment server address while enrolling it through Network->Workplace Settings.
Windows Phone 8.1 doesn't have this issue. 

Did you try the Nokia Software Recovery Tool already?

Similar Messages

  • Windows 8.1 Devices and Printers Issues

    We have deployed a brand new Active Directory domain for a customer. ALL the servers without exception are Windows 2012 R2 and all clients are Windows 8.1 32bit VDI clients.
    The issue that we have is around network printers. 
    We are deploying 4 printers  from a Windows 2012 R2 Server via the print management/Deploy Printer and assigning that to a GPO. The printers are deployed to the Computers which should mean that the users get all 4 printers which they then should be
    allowed to set their default and personal settings for that printer.
    Our printers are deployed like this:
    1. Created security group
    2. Assigned VDI computers to the security group
    3. Created GPO to reflect security group
    4. Modify GPO to do security filtering based on computer group membership
    5. Deployed 4 x printers through Print Management to the GPO on a per machine basis
    However, on the users Devices and Printers screen we are not seeing the 4 printers. For some users they see duplicates of all 4 printers so e.g they can have upwards of 8 or more. Other users have no printers
    displayed whatsoever. The next time they log off or restart they then have a different amount of printers displayed.
    If they try and set the default then it will set and the next time they check the default may have moved to another printer even without logging off or back on.
    Now, where this gets strange is within an application such as MS Word 2013 or Notepad if they use the file and print menu the printers will be listed, even if the user has no printers displayed in Devices and Printers. If the users selects a printer then
    they can then print OK.
    If we check HKCU\Printers||Connections then the CORRECT 4 printers are showing as to what is being deployed via the GPO so I know that the Windows 8.1 terminals are receiving the correct printers from the GPO.
    To try and correct this over the course of the week we have deployed the printers via Group Policy Preferences to the user and then the PC to no avail. Currently we are using the Print management\Deployed Printers to deploy all 4 printers to the computer
    via the Computer GPO.
    I believe that this issue is related to the display somehow in Devices and Printers rather than a GPO or print server issue as we can see via the registry the clients are receiving the 4 correct mentioned printers as shown in the registry. 
    FYI: We only have around 30 users and all users are getting this problem. All users are receiving the same GPO's and have the same few apps installed, Office 2013, Adobe Reader etc.
    What we want is for the computers to receive all 4 printers. All users should be able to use all 4 printers but the user should be able to select their particular default, depending where they are located or what they are printing that particular day. Their
    particular default should persist after reboot. (We have 2 x Copiers and 2 x HP Laserjets) All users have redirected documents and desktop but the rest of the profile is on the VDI and persists after their reboot. The profile is not roaming as the user is
    assigned a particular VDI.
    After a week of scratching our heads with this we are open to suggestions and any would be appreciated. We have tried following the issues on this thread to no avail either as they still return.
     http://social.technet.microsoft.com/Forums/windowsserver/en-US/71d06204-3735-4473-8bc9-20be9e19090e/problem-with-multiple-instances-of-shared-printers-being-installed-on-client-computers-when-the?forum=winserverprint
    many thanks

    Hi,
    It's strange thing on your client PC. You may ask the GP support engineer to know more.
    Support link for GPO:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverGP
    On my side, I would like you to try following alternative suggestions:
    Try Net use command to map the network printer
    Use GPO to deploy the map script
    How Can I Add a Network Printer at Logon and, Optionally, Make That the Default Printer?
    http://blogs.technet.com/b/heyscriptingguy/archive/2006/12/12/how-can-i-add-a-network-printer-at-logon-and-optionally-make-that-the-default-printer.aspx
    Hope it could be helpful.
    Kate Li
    TechNet Community Support

  • ActiveSync not working for Apple Devices - Windows and android devices not having issue

    Recently we have had reports of users not being able to send or sync emails to / from Apple iOS devices. When we look at the ActiveSync logs, we see the affected people getting HTTP 503 errors. Yet if this person works on a Windows Mobile device or an android
    Mobile device - they do not have the problem. Similarly, if the person uses the new "Outlook" app on an Apple iOS device, they don't have the problem. It only occurs with the native mail app on iOS devices.
    We have Exchange 2013 CU5 - 4 x CAS Servers on Windows 2012, and 6 x Mailbox servers on Windows Server 2008 R2 (hardware doesn't support WS2012).
    We have logged a call with MS Support and they are looking into it, but was just wondering whether anyone else has seen this issue.
    PS - Before anyone suggests it - we have new servers on the way for the mailbox servers, and will install WS2012R2 and CU8 on it when they arrive.  But because our executive is being affected now, we need to look at this now.

    I did inital think it might be a widows phone issue but there are no other settings for me to use.  I have also tested using a windows 8 surface and I get the same issue.
    I have raised the event log level on the exchange server to expert and I have seen 2 messages when I try to connect. 
    I get Event ID 1100:  Exhcnage ActiveSync device requests for your uses are being blocked.  This problme frequently occurs when HTTP OPTIONS method is not allowed.
    I know it is allowed as the test exchange connectivity worked and passed that test.
    The other error Event ID 1309 ASP.NET warning.  Part of the exception messge is DeviceTypeMissingOrInvalid
    I have come across a comment that says for certificates to work you need to use windows intune or SCCM which we don't have.  Do we know if this is true? 

  • How would i setup certificate authenticated activesync on a windows phone 8 device? Without intune or sccm?

    I've searched all over for this and can find no clues in the interface.
    We have certificate authentication to activesync, via tmg working well for IOS devices and android, we issue the user a certificate, they use it to authenticate, boom no problems.
    We're considering a move to issuing windows phone 8 devices as well, yet i see no way, or instructions on how to actually set these things up to authenticate with a certificate? I see some rumblings about airwatch and sccm with intune, but i don't want to
    pay for a subscription just to use this when it works fine without on other platforms.
    Can anyone shed any light?
    Many thanks,
    Jim

    Hi - we're authenticating with internally issued certificates against a TMG listener, not sure if that is or isn't mutual certification - I have installed the root on the devices so they are trusted, works great with ios, android etc.
    The main issue is there is no place in the setup where you can specify the certificate to use, i have a feeling they (like blackberry) are railroading you into using a paid for mdm solution for cert auth. Be delighted if that isn't the case tho. It is easy
    enough to do this for WP8 with SCCM and InTune but i'm not keen on taking out a subscription just for WP8 devices when we can do it gratis with ios and android.
    Thanks for the reply.
    Jim

  • Availabili​ty of Windows 7 Beta Device Drivers for some Lenovo Thinkpads

    Good Day
       Lenovo will be posting 10 Windows 7 Beta device drivers* to it's public
    Windows 7 beta webpage before the end of May. The drivers posted will be:
      1)  Lenovo System Interface Driver
    2)  ThinkVantage Active Protection System
    3)  UltraNav Driver with support for single and multi touchpad systems
    4)  UltraNav Utility
    5)  ThinkVantage Power Manager
    6)  ThinkVantage Power Management Driver
    7)  FingerPrint Driver
    8)  Hotkey Features
    9)  ThinkVantage Access Connections ver 5.40
    10) WWAN 
       The drivers will be available at   www.lenovo.com/windows7beta
       These drivers are STRICTLY beta and have NO public support.  Please do not
    call the Lenovo HelpCenter seeking support as they will not assist you.
    Feedback on driver issues via this thread is encouraged and those concerns will
    be send back to the individual device driver development teams. 
      There will be 32 bit and 64 bit versions of some device drivers are available.
      *Drivers are supported on RC Build 7100 and later. The drivers may work on earlier builds
    Terry  Lenovo Win 7 TestLenovo Enterprise System Experts  

    <chuckle> we are all excited to try them
    Message Edited by Darksaber on 05-16-2009 10:28 AM
    x200 7454-CTO; 320GB HD; 4GB; Win 7 64bit - Now on RTM.
    - 2nd SSD with Win 7 Enterprise RTM
    T61p - RTM - Win 7 Enterprise
    S10 4231 for my wife - now on Win 7 Ultimate RTM

  • Mac Enrollment Issue on SCCM 2012 SP1

    Hi Guys,
    I am working on Mac enrollment(10.7) and facing issue during enrollment. Below is the error message when we try to run the enrollment command on Mac :
    “Server connection failed. HTTP Response code is 500 and reason is Internal Server Error"
    Below are Log info:
    Enrollsrv.log : No error message is highlighted.
    Enrollweb.log:
    No error message is highlighted.
    Enrollservice.log:
    [7, PID:7304][10/28/2013 16:40:03] :ConfigManager: ChainStatus error: RevocationStatusUnknown,The revocation function was unable to check revocation for the certificate.
    ;OfflineRevocation,The revocation function was unable to check revocation because the revocation server was offline.
       at Microsoft.ConfigurationManagement.Enrollment.ConfigManager.SplitCACertChain(String base64cert)
       at Microsoft.ConfigurationManagement.Enrollment.ConfigManager.setCAChain(EnrollmentServiceProfile profile, WindowsIdentity requester)
       at Microsoft.ConfigurationManagement.Enrollment.ConfigManager.RefreshCache(Int32 enrollmentProfileId, EnrollmentRecordType type, String template, WindowsIdentity requester)
       at Microsoft.ConfigurationManagement.Enrollment.RequestHandler.ProcessRequestSecurityToken(RequestSecurityTokenType request, WindowsIdentity caller, ActionEnum action)
       at Microsoft.ConfigurationManagement.Enrollment.RequestHandler.EnrollDevice(Message messageRequest)
       at Microsoft.ConfigurationManagement.Enrollment.DeviceEnrollmentService.RequestSecurityToken(Message messageRequest)
    [7, PID:7304][10/28/2013 16:40:03] :FaultCode is: EnrollmentServer and reason is: EnrollmentServerException InitializeFailed
    [13, PID:7304][10/28/2013 17:11:01] :EnrollmentService application stop ...
    [3, PID:956][10/28/2013 17:45:37] :EnrollmentService application start ...
    [3, PID:956][10/28/2013 18:06:38] :EnrollmentService application stop ...
    [3, PID:4700][10/28/2013 18:45:39] :EnrollmentService application start ...
    [7, PID:4700][10/28/2013 19:06:40] :EnrollmentService application stop ...
    [3, PID:5872][10/28/2013 19:45:42] :EnrollmentService application start ...
    [13, PID:5872][10/28/2013 20:06:42] :EnrollmentService application stop ...
    Can someone shed info on resolution of the above issue?
    Also, is there any means by which we can troubleshoot the Mac enrollment issue step by step? Also what entries needs to be checked in all logs for successful enrollment?

    the following links may give you some hints:
    http://social.technet.microsoft.com/Forums/en-US/48bc7fcc-3d84-4042-abac-67f30d701121/mac-enrollment-issue?forum=configmanagerdeployment
    http://www.windows-noob.com/forums/index.php?/topic/7391-mac-enrollment-issue/

  • Call dll function on Windows CE6.0 Device

    I am trying to call a dll on a windows CE6.0 device, which is the KEBA KeTop T20techno.
    In the "call library function" I added a selfmade WIN32 stub dll and in the build specifications I added the original Windows CE .lib file.
    When I try to build an execution I always get the following build error:
    THUMB is a missing VI or C file
    ARM is a missing VI or C file
    Can anyone give me a hand on this issue?

    Hi Oimel,
    Are you sure that the function name and function prototype for both libraries is the same?
    Thanks as kudos only

  • Windows 7 T-series (T400) powermanagement issues?

    Hey, I just clean upgraded my T400 from a very stable Vista32 Home Pre to a Windows 7 Ultimate hoping to reap the benefits of faster boot time and faster operation of notebook features (sleep & hibernate) among other thinigs.
    Unfortunately I've noticed some problems with my new setup. My no 1 problem is the sleep is unstable. I've had two occasions now where I put the machine to sleep, and had the machine shut down instead, and upon reboot, windows recognizes it was shutdown unexpectedly, and seems to recover correctly.
    It seems like the machine dies suspending or perhaps it suspends then dies. I didn't notice it both times, because the suspend operation is not instataneous.
    Another problem which seems related is that I still get the Fn+Home/End brightness controls don't work sometimes. It's rare, (probably twice), but the killer here is that the "close the lid and open it again" does not solve the problem. Instead it shuts the screen off, and never comes back...and the only solution is to hold the power button.
    These problems are really disconcerting, and from what I've heard from Windows 7, very unusual. So I'm confused and am wondering if anybody else has experienced anything like this.
    Naturally I've updated to the very latest BIOS update, and tried to get all the latest drivers. I used System Update 4, but it seems to miss some of the updates (i.e. Power manager update, IBM PM device, Bluetooth update etc.) so I tried to update each component from the driver matrix...checking each one as much as I could.
    I haven't been able to make any progress by looking through the eventviewer logs. Windows 7 has some nice power management troubleshooting logs, but nothing seems to be coming up as the problem.
    Thanks in advance for any feedback!

    &Re: Windows 7 - Audigy 2 ZS Mic Issues? The support pack does absolutely nothing to fix the mic issues.
    Does this driver improve sound quality or performance? Are there any tweaks?
    No, this driver does not improve sound quality nor increase performance.
    No, there are no tweaks.
    If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
    It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and?sound?fidelity that all audiophiles always look for.
    If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
    In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
    I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
    There are some undocumented registry values, but nothing related to sound quality or performance.
    Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
    and
    Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
    Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
    Workarounds:
    - install the 32-bit (x86) version of Windows
    - limit the RAM available to Windows to less than 4GB
    - enable Memore Hole in BIOS Setup, if?your motherboard supports the setting

  • WRT54GXv2 Won't Allow Windows Mobile 5 Device to Connect

    Using the WRT54GX as a WAP with DHCP and NAT turned off.  Installed latest firmware earlier today.  DHCP is being supplied by a SonicWall SOHO 3.  Both PC's and MAC's can connect wirelessly (WEP 128 bit key) but my new T-Mobile MDA phone tries to connect but then drops.  I verified the WIFI on the phone works by connecing to a T-Mobile WIFI Zone at Borders books earlier today.
    Is there an issue with Windows Mobile 5 devices and the WRT54GXv2?  Is there a workaround?
    Thanks!

    Try to configure the router this way:
    Connecting a Wireless Linksys router to a regular Ethernet Linksys Router
    Now since you are issuing DHCP on a Sonicwall SOHO3, make sure your router is on that range instead of the router IP on the directions on that link. Goodluck! Remember it's from a regular port from Sonic wall to a regular port on the WRT54GX..
    "The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

  • Windows says: This device can perform faster

    I have 2 ipods, ipod photo and an ipod video.
    When I connect ipod video on my USB 2.0 port, it works fine no errors are shown. But when I connect my ipod photo, I get a prompt from windows saying: "This device can work faster, its a USB 2.0 device blah blah blah"
    is it clashing with drivers for ipod video or there is a problem with my ipod?

    There is nothing wrong with your iPod. The message is just alerting you to an issue on your system. Basically, you are not getting USB 2.0 speeds, which means whatever storage device you connect to your laptop is transferring data at much slower speeds. Try different USB ports to resolve the issue. However, it is not THAT big of a deal. Usually, i don't care about it because once you transfer anything through Firewire, you would be amazed by USB 1.0/2.0 slow speeds.
    You can also turn off the "error" message: In Device Manager, click on the USB host controller, click the Advanced tab and then check the box on the bottom of the window that says “Don’t tell me about USB errors.” Do this for each USB controller in order to prevent this error no matter which USB port you plug you iPod to.
    Hope this helped.

  • IPhone 4 / Bluetooth / Windows 7 / Peripheral Device not installed?

    I am unable to install my iphone 4 to the new laptop I have, OS Windows 7. The devices pair fine and recognize each other, I just keep receiving error messages when the driver automatically installs. It reads "Bluetooth Peripheral Device" not installed. Any solutions???
    Thanks
    -Jonny

    I realise this is an old topic, but it seems everyone has the wrong band-aid fix.
    The correct fix is as follows:
    The issue is that Windows doesn't recognise the iPhone as a Bluetooth Peripheral Device and cannot find the correct driver to download and install.
    Follow the following steps:
    - First, you need to install the appropriate 'Windows Mobile Device Support' software for your version of windows (32 and 64 bit versions have different files to download).  It may look like it didn't install in Windows 7, but that's ok.  It did.
    - Turn on the bluetooth discovery mode on the iPhone.
    - Select 'Add a Device' in Devices and Printers, follow the instructions to connect and enter the 8 or 9 digit key into your iPhone.
    - Your iPhone should be found and automatically install all the software and drivers except for the Bluetooth Peripheral Device driver.
    - In Devices and Printers, right click the iPhone, select properties, and then the hardware tab.
    - The first device function should be 'HID-compliant consumer control device. Ensure it's selected.
    - Select Properties, and in the next window select 'update driver'
    - Select 'Browse my computer for driver software'
    - Select 'Let me pick from a list of device drivers on my computer'
    - Select 'Bluetooth Radio' from the left hand side listing
    - In the next window, select 'Microsoft Corporation' on the left, and 'Windows Mobile-based Device support' from the right side.
    - Install this option, clicking through the warnings and accepting this option.
    - Now you have the device driver installed, and your iPhone will be connected via Bluetooth when you need to pair it - great for file transfers and internet access without turning the radio on.
    I hope this helps.  This is the proper fix.  Not the 'pressing two keys at the same time' or unchecking the option that only allows some features to be used.

  • I tried to use the Browse button on the left pane to go to a server which has my local copy so that I can FTP to ISP, but I get a window saying there is a permissions issue. How do I resolve?

    I tried to use the Browse button on the left pane to go to a server which has my local copy so that I can FTP to ISP, but I get a window saying there is a permissions issue. How do I resolve?

    If it has a cloud icon it means its no longer on your device.  Tapping on the cloud will effectively reinstall the App from scratch to your device. 
    There is no way to remove it from the cloud because its not yours to remove from there. Its the general App repository, you are just given access to it to download content you've already purchased.

  • MDM Indexer Issue !

    Hi All,
    I am facing a strange issue. I have two MDM servers one is installed on my local machine (Windows Platform) and another MDM server on Client Machine (Unix Platform). When i open MDM Indexer for any of my local machine repository, Indexer is working fine ( I am able to see Index value with their Page number in Basic Format) but when i open it for Client Machine (which is on Unix Platform) Index values with page number is coming into XML format. so, i could not able to publish this XML format of index values with page number to adobe in design DTP tool.
    I have alredy tried Stylesheet property under tab Index Properties, for this whatever Property i saved (None, Basic, Fancy) Format for Index Values with page Number is same i mean XML Format only. But when i open MDM Indexer for repository which is on my local machine (Windows Platform) i get XML format only when i have this Stylesheet Property None. For Basic and Fancy it is coming in the required format i mean Index value with Page number which i am able to publish on Adobe in design DTP tool.
    I don't know where i am going wrong. Am i missing any other setting ?  I am using MDM Version 5.5.64.97
    Thanks,
    Mandeep Saini

    Steps to transfer index from Indexer to InDesign with the new version:
    1.     Install the provided Indexer version
    2.     With a loaded repository, open the Indexer and create the desired index.
    Afterwards press on the u201C!u201D button to recalculate the index.
    3.     Copy the Indexer folder to a temp folder
    4.     From the temp folder open the RawIndexXML folder. It holds the XML files for the indexes created. Find the last one   with the timestamp of the time you recalculate the index.
    5.     Copy it and place it in the Indexer folder. 
    6.     Open a command shell from the machine where Indexer is installed.
         Navigate to the folder where Indexer was placed in the temp folder.
         Run the u201CIndexer u2013hu201D (might need to press enter to get the marker again)
                          Run 'indexer result.xml'
                          Navigate to the Indexer temp folder. A results.xml file was generated.
    7.     Open a new document in InDesign.
    Select File->Import xml
    Select the generated results.xml file
    A root pane of the index will show on the left.
    Drag the MDM Index parent node into the document
    The index will appear.
    Styling may be defined as needed
    Best regards,
    Hedda

  • How to run an application on windows mobile 6 device ?

    Hi everybody,
    How can you run an application on a windows mobile 6 device with the new SDK 3.0 ?
    Can you launch a MIDLET like any other program ? or running your MIDLET on windows mobile 6 is only for testing while you are developing.
    When you finished your MIDLET, can you copy the jar file to the mobile device with windows mobile 6 and to run it anytime ?
    Thank you.

    Its simply a matter of opinion, but I'm 3-months-in, developing for WM5 + WM6 and the only usable solution I've found that has the correct look and feel on Windows Mobile as well as JSR support is IBM's J9.
    It's not free, but I searched high and low, and it's the only product that I was happy with.
    Here's a [screenshot of it running my application on WM6 emulator|http://3.bp.blogspot.com/_9hmP3Ho0t14/S7eDTXfkE9I/AAAAAAAAAa0/ISZ-HohZQDs/s1600/wm6.png] .
    Here's a [quick article I wrote for it.|http://fatbuttlarry.blogspot.com/search?updated-max=2010-02-16T11%3A34%3A00-08%3A00&max-results=7] Remember, it's NOT free. Pricing is very fair, but you'll have to license it to use and distribute it.
    -Tres

  • SAP B1 on Windows Handheld Smart device

    Dear Experts,
    The following is my requirement...
    I have Windows based smart devices (Barcode scanner integrated), they run on Windows CE, I want to write an application which can be installed on these devices and Users can post transactions (Inventory Transfer, GR, GI).
    I have started a windows Smart Devic+e project in VS 2005, And I have added the SAP B1 DI API 8.8 as a reference. Now when I am trying to connect in the Emulator, I am getting the error. "Class is not Registered".
    This is my first smart device project. Please advice on how to proceed further.
    Thanks In advance,
    Vasu Natari.

    Hi Vasu
    Download B1WSSourceCode_1.1 - it has the source for B1WS and includes samples.
    The services default to localhost and in the sample, you have to change the app.config file to point them to your web server (if indeed it is not your localhost).
    In a smart device application, which has not app.config, set the URL property.
        Public Sub New()
            _Service = New StockTransferService
            _Service.Url = "http://192.168.0.250/B1WS/Service.asmx"
            Dim msgHeader As MsgHeader = New MsgHeader()
            msgHeader.SessionID = GlbData.SessionID
            msgHeader.ServiceName = MsgHeaderServiceName.StockTransferService
            msgHeader.ServiceNameSpecified = True
            _Service.MsgHeaderValue = msgHeader
        End Sub
    That is the typical example of a service you will find in the samples - note the _service.url setting.
    Hope this helps.
    Regards

Maybe you are looking for