Window Arrange problem in dual monitors

When attempting to arrange photographs which have been dragged to my primary monitor (entire Photoshop CS6 beta program opens [as I have set it up]  in my secondary monitor), the photos are arranged, but moved back to the monitor where Photoshop resides.  In Photoshop CS5 and earlier, the photos would stay in the same monitor in which I placed them.
Thanks for any help.
Windows 7 64, occurs in both PS6 beta versions.
Tom
I suppose keeping the main program frame in the desired photo location would work (with the toolbars moved to the second monitor).  That would still give me plenty of better-of-the-two monitor real estate, but it really did used to work as I described above.
Message was edited by: stormy.boy

Thanks,
But I already set up my xorg.conf for that, and used those commands.   It didn't work.   My xorg.conf right now, though, doesn't have the changes I made because I reinstalled Arch (reinstalled because I started using Kubuntu and decided I preferred Arch).
See my orginal Xorg.conf: http://pastebin.com/ff386ad2

Similar Messages

  • Problem w Dual Monitors on ATI Radeon HD 4870 512 MB

    Hi I'm having problems with Dual Monitors on ATI Radeon HD 4870 512 MB, Mac Pro 2009.
    Setup: I'm running two 27" DELL U2713HM Displays at 2560x1440 one via direct DVI cable and the other one thru the Mini Display Port via Dual Link DVI adapter.
    Now when I boot up the left screen displays the start-up apple as it should but then both screens go black and the right one (DVI connection) comes on while the left one stays black, goes into power safe mode. When I go into preferences > Displays I even get only one single display as if there were no multiple connected. It's however NOT a connection problem, since it works during the boot up sequence.
    Any idea what might be wrong with my set-up? Do I need a new graphics card?

    You do have the dual-link adopter connected to USB power right?
    Next I would try using a displayport to mini displayport cable. You monitors have:
    Connectors VGA, 4 x USB 3.0, DVI-D (HDCP), HDMI, DisplayPort 1.2,
    That cable is about $10
    http://partnerdirect.dell.com/sites/channel/Documents/Dell-UltraSharp-U2713HM-Mo nitor-Brochure.pdf

  • Problem on dual monitor system

    Hi;
    I have dual monitors and put Eclipse on the right monitor full screen. When I move the mouse over a variable, the pop-up is displayed in the left monitor.
    ??? - thanks - dave

    I've a similar problem. But actually my problem is very common; I've seen a lot of programs showing this.
    My monitors are arranged as [2][1]. That means the primary monitor is on the right while the secondary is on the left. But most programs suppose that we have [1][2]. This is a very very bad assumption.
    So when the application window is placed on the secondary monitor, ie on the left, popup, tooltips or other things would appear on the right ([1]) !
    Nitrox is, unfortunately, one of these applications.

  • Photoshop CS5 for Windows not working on dual monitor setup

    If I try to open Photoshop CS5 while my second monitor is plugged into my laptop (via VGA cable), it loads normally, but won't display any opened images. I get a gray background and nothing else. (see screenshot here: http://screencast.com/t/f1bHcM3E )
    (I can even see the tiny image preview in the navigator, but not the image itself.)
    However, t'll work just fine if I open Photoshop with the second monitor disconnected and THEN plug it in, so it's not a problem with the dual monitors in general...just when first opening it. It's annoying because, if I'm working on a project and realize I have to make a quick image tweak in Photoshop, I have to unplug the monitor and then rearrange all my windows after Photoshop's done loading and I can plug it back in.
    Does anyone have any idea what's up with this? I can't seem to find any information online that specifically mentions this issue. For reference, I'm using Windows 7 on a Lenovo laptop.
    Thanks!

    Oh, that's possible. I went and read the detailed specs for my computer and it seems like it has both Intel and NVIDIA. Could that be it? (Computer hardware issues are not my area of expertise.)

  • Elements 11 Preview Window not visible in dual monitor mode

    When I go to dual monitor mode the preview window is hidden. I can still hear the audio from the clip but I can't see the video window. It is still hidden when I switch back to single monitor mode. The only way to bring it back is to close out the program and reopen it. Does anyone know where it goes and how to make it visible?

    MAINEEDIT
    I have just set up for Premiere Elements 11 Dual Monitor Mode in Windows 8 64 bit computer.
    How do you have your monitors set up...Extend Across.. or other?
    I am not having any problems keeping track of what I believe you are referring to as the "Preview Window". So please excuse
    if I double check with you via the following screenshot.
    Preview Window which can be brought up
    a. double clicking the file in Project Assets
    b. double clicking the file on the Expert workspace Timeline
    I am going to go over this one more time with my Premiere Elements 11 and Windows 8 64 bt computer to see
    if I can create the situation that I am interpreting that you have.
    Thanks.
    ATR
    Add On...This especially makes me ask....
    When I reopen the program the preview window appears in its normal position.
    The Preview Window is going to close when you save/close the project. As you saying that you re-opened the project
    to find the Preview Window opened?

  • Lync 2013, text does not display in chat box. Windows 7 pc with dual monitors.

    Has anyone experienced an issue with Lync 2013 where when someone sends a chat the text doesn't display in the chat box. Or on occasion when initiating a chat, the text typed in doesn't display? The person experiencing this
    behavior has dual monitors and often times when she is working on a document - then goes to Lync and initiates a chat and types, the words do not display in the chat box. Her graphics drivers are current, (8.15.10.2869). At one point she was able to drag the
    chat box over to the monitor on the left and then the text displayed. Since then she has received a brand new laptop, windows 7 and the Lync behavior continues but now her dragging the chat box to other monitor no longer resolve text display issue. Ideas?

    Hi,
    Did the issue happen if only use single monitor?
    Please update to the latest version for Lync client 2013 and then test again.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • Windows Photo Viewer and dual monitor slideshow

    Why does Slideshow only works on a main display?
    why can't i move Photo Viewer to the secondary monitor then start slideshow there? if i do that in Win7 RC the secondary display will turn all black and the main one will start the slideshow.

    that seems to have worked for me, but the inactive screen is still blackened, do you think the photo viewer doesn't fully support dual monitors? I also noticed the picture is the same display size as the primary monitor, as in whatever size is is during
    a slideshow on the primary is the same when switched to the secondary.
    I could juy st tap the window key to get the primary back, but then the unused portions of the secondary revert to the background...this seems like a strong candidate for a windows update that actually changes the way the OS works... can I has some cash
    now?
    hey, MS, WTF?
     pictures viewer unable to work with few monitors?
    i checked - by pressing "Window Key+Shift and tap either the left or right arrow" 
    it changes monitor, but other one hold black!
    i checkerd win7, win2008srv, win2003

  • New arch installation, problems with dual monitors

    tldr: nvidia setting are not saving when when I leave a session.
    yesterday I wiped my computer and went from ubuntu to arch on my desktop (been using arch on laptop for a while). I'm having problems getting my dual monitor settings to save. I configure the settings via nvidia server settings and it works fine but when I go to reboot or log out it goes back down to just one screen and I have reset up nvidia.
    gdm has never seen both monitors its always just the single screen.
    software
    nvidia drivers 280.13
    xfce4 v4.8.0
    gdm 3.0.4-2
    kernal 3.0-arch
    my system is up to date with a yaourt -Syu
    Sorry if this has been answered but my googlefoo was not strong today.

    GDM *should* use a xorg.conf if it exists.... I also noticed that Arch keeps a xorg.conf.d folder, which I'm not sure the nvidia-settings app knows how to handle.
    Also, make sure you are running the nvidia-settings app with root privileges, as you'll need those to write a xorg.conf in /etc/X11.

  • Problem with dual monitor 30" and 20"

    waaa... i've switched plugs and all that.. my 30" is acting as a second monitor no matter what i do...
    i want the 30" as my main display...
    my dock and menus are on my 20"
    is there a way to switch them? or do they not support dual monitor with a 30"
    for your info..
    video card is nvidia geforce 7300 gt
    please help.. i don't want to give this bad boy to someone else at work.
    thanks.
    Pave

    How?

  • Big Problems with Dual Monitors

    I am running a Mac Pro with the Nvidia graphics card. I did boot camp to intall windows, but later decided to remove the partition adn install parallels. The problem is thaton the mac side when I place a monitor on the second port, all my screens do is flash blue and never show up. I tired reinstalling the os, and this didn't fix it. I have 2 20 in apple cinima screens, but I can't use them both becasue when I plug the second one in both of my screens go away (flashing blue on and off). How can I fix this? it is real problem.

    Have you also tried setting up dual display using the windows settings instead of the NV control panel?
    Also (and this one is obvious, but worth checking)...if your HDMI display has multiple inputs (DVI, VGA, HDMI, etc.), make sure you have it set to the correct input.
    I'm guessing the issue is with the HDMI display.  Is there any way you can try a DP monitor instead of the HDMI monitor?  That could help narrow the problem even further.  Nvidia is very particular about the cable adapters/dongles that they claim support for with their cards.  The one we sell is officially supported (made by Bizlink).

  • Problem with dual monitors - unresponsiveness and shut down

    Hello there!
    I've been happily using a 2010 Mac Pro since March with a Radeon 5870 card and two Apple displays connected to the card with mini-displayport cables.
    Recently, after I installed Lion, the secondary screen has been acting strangely; sometimes, while I can move my cursor without any problem on it, I can't click on anything. I click and the program, such as Apple Mail or Reason, just doesn't respond in any way. Moving the program window to the main screen solves the problem.
    Moreover the secondary monitor sometimes shuts down for a second, displacing in the meantime all my windows to the main one. It always comes back instantly.
    Finally, when I use Windows 7 the secondary screen isn't even recognized anymore; it stays black and windows doesn't see it.
    I tried of course to unplug and reconnect both monitors a few times but the problem, which in Lion is sporadic, remains.
    Any ideas?

    There ARE problems hooking up multiple DVI displays. But Mini DisplayPort displays are supposed to "just work" according to this article:
    Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
    The other issue some users have is not completely seating those Mini DisplayPort cables or adapters. The connector must be inserted into the jack until essentially ALL of the metal part disappears.

  • Problem using dual monitors with Radeon 9000 Pro and 2 x Samsung SM223BW

    Hello all
    I really need an expert opinion here:
    I am using quite a lot my MDD 1.25Ghz that is still equipped with the OEM ATI 9000 Pro Mac Edition with 64MBs of Video RAM and as most if not all Mac-specific cards it has an ADC and a DVI port. I recently purchased a couple of Samsung monitors; the afore mention in the subject SM223BW. The monitors have two inputs, both DVI and D-SUB (Analog VGA or otherwise plain old RGB).
    I have purchased a Formac ADC to DVI converter and connected this output to the DVI input of the first monitor. It works like a charm and the picture quality it is quite good (not as with an Apple Display but I couldn't afford them at this stage). For the second monitor I used a DVI to VGA cable (going from the DVI output of the card to the VGA In of the monitor).
    Now here is the problem: The monitor that is connected ADC to DVI has all the available 16:10 ratio option that are suitable for this monitor. The DVI to VGA one gives me only a 1680x1050 and all the rest are 4x3 resolutions.
    Would anyone know why this happens? Could it be a monitor issue? Could it be that perhaps TFT monitors offer different resolutions according to the input used. Or could it be the graphics card? Or even perhaps the cable?
    Under OS X, same settings and same computer I am given more resolution options. Would that mean that it might be as well my beloved OS 9 in combination with the card?
    Or am I stressing this too far?
    Please any ideas are more than welcome
    PS: I have a dual 2.0Ghz G5 connected to the rest of the DVI and VGA inputs to be able to run both without having to repatch. Otherwise a DVI to DVI connection would have made more sense and solved the problem

    Hey Simon
    I bought these monitors for their dual input functionality. The reason that I have the G4 connected to VGA is because I have another G5 connected the other way around in order to be able to use both computers, at any given time, with two screens.
    Perhaps to make clear the connections I've done (if of course anyone is interested :)) ...
    The G4 connects via ADC to DVI to the DVI input of Monitor No.1
    The G5 connects via VGA to VGA to Monitor No.1
    The G4 connects via DVI to VGA to Monitor No.2
    The G5 connects via DVI to DVI to Monitor No.2
    Another question would be why simply one mac isn't connected solely via DVI and the other one via VGA? The reason is that the VGA input looks awful on these screens for whatever reason. The image is seriously not sharp, the fonts looks horrendous and even with a lot of tweaking from the monitor settings, still I'd say the image is minging. If anyone knows why a VGA input can look that bad and still a monitor being in the market please let me know. It could be that this monitor is aimed to PC users and with the accompanying PC-only drivers all such are non-existent...Anyway I decided to go with the half DVI-half VGA solution to get the best out of the situation.
    But on the question asked, I decided to use a 2 DVI input Avocent KVM that I've got with interesting results. I am pretty sure it is boring to read but if anyone has spare time here it goes:
    The G4 connects via ADC to DVI to Monitor 1.
    Monitor 2 DVI output connects to DVI KVM Input
    The G4 connects via DVI to DVI to KVM Output 1
    The G5 connects via DVI to DVI to KVM Output 2
    The G5 still connects via VGA to VGA to Monitor 2
    In this manner I am guaranteed to utilize the DVI inputs for both monitors, at least on my G4 and the G5 be forced to utilize one VGA. The plus side of the situation is that I can use both systems with the flick of a button without having to get up to change the Source on the monitors plus of course one keyboard and a mouse. Now here is the interesting bit:
    Under OS 9, with the resolution 1280x800 on Monitor No.1 (the one connected via ADC to DVI) flips to - I think - 1680x1050 - it could be higher than that - with a thick black frame around the Desktop occupying a good chunk of the screen and the actual OS 9 looking minuscule at the center of it.
    Monitor No.2 (the DVI to DVI connected one) looks just fine.
    Now on top of that, when the G5 is switched on but the KVM is outputting the G4 desktop on Monitor No.2, whenever the mouse cursor slides on this monitor, it goes black! Just simply black and when I move the mouse cursor back on Monitor No.1 goes Desktop again.
    Under OS X, none of the afore mentioned problems exist. Everything runs fine and I am give more 16:10 resolutions as well.
    Confused? I am

  • Full Screen Problem With Dual Monitor Viewing

    I have a 64 Bit system, Chrome browser and with flash player built in.  I am attempting to view videos on a 2nd monitor while working on the primary monitor.  I have tried this on various sites, TNT.tv, USANetworks.com, etc...  I select full screen viewing.  A message is displayed to exit full screen press escape.  However, when I attempt to do anything else automatically exit full screen on the second monitor.   This should not be an issue and with the way most people view video online, they are doing so on a 2nd monitor or TV.  I have done a google search and it is a common problem, but there is no solution that seems to work.

    I have just posted the same question - missed yours.
    Adobe could you take a look into this - I think solving this problem can't be that hard.
    jef

  • Screen Sharing problem with dual monitors in 10.6

    When I'm using Screen Sharing from my Macbook to my iMac with dual displays (10.6.1 on both machines) It works fine when I initially connect, but when I switch to Display 1, it shows me Display 1, but though my cursor moves, I can't click on anything. It won't let me go back to viewing both displays either, and changing from Adaptive to Full Quality or vice-versa makes no difference, as does Scaling. This happens whether I'm on my local network or using Back-to-my-Mac. It was working fine under Leopard, but has been exhibiting this behavior since the 10.6 upgrade.
    Mark

    This is a very irritating bug. One thing that has worked for me a couple of times (I think a couple of times it also didn't work) is to turn on mirroring. Screen sharing then only shows one monitor, since they are both the same. I'm not sure if the monitors have to have the same resolution for this to work, mine do. The nice thing about this is that before quitting the screen sharing app you can just turn mirroring off again and it will go back to normal. It's easiest to do this by enabling the 'show displays in menu bar' in your displays preferences.

  • Radeon 9800 xt pro problems with dual monitors

    I just got a Radeon 9800 XT Pro for use with my G5 Dual with two Lacie 22 inch monitors. I'm finding that sometimes the left monitor comes up with a wrong desktop photo and the icons that normally are on the right (primary) monitor switch over to the left one. Can a video card cause this or is it to be traced elsewhere?
    Dave
    G5   Mac OS X (10.4.8)  

    I'm pretty sure you will know the answer right off the bat. thanks!

Maybe you are looking for