Window Dragging
In LV6.1 is there any way to prevent window dragging other than making the title bar invisible?
Hello Jim,
Check out this other Discussion Forum link. It looks like making the title bar invisible would be the best way to do this unless you were able to determine the Windows system DLL calls that would be needed to do this.
Regards,
Clint M
National Instruments
Similar Messages
-
"In the Data Palette window, drag the Login to Portal portlet ..."?
Hi;
In http://e-docs.bea.com/workshop/docs81/doc/en/portal/samples/login.html?skipReload=true it says "In the Data Palette window, drag the Login to Portal portlet onto a placeholder on the page. "What does this mean and how do I do it?
And the following line is "In the Property Editor window, set any relevant properties." - where is the property window and what properties do I want to set and to what value?
thanks - daveHelp please
thanks - dave -
Regrading full windows drag in remoteapp
Hi,
I've set up the "disable full window drag:i:1" setting in the rdp file for a remoteapp program, but it does not work.
Using windows 7, RDP 7.1 (haven't upgraded to 8.0).
Doesn't this setting work for remoteapps?
ThanksHi,
That's what i did in the first place:
"..I've set up the "disable full window drag:i:1"
setting in the rdp file for a remoteapp program, but it does not work."
What works is the following:
On the client computer, go to "System"->"Adjust the appearance and performance of Windows" and disable the "Show windows contents while dragging".
But like i said the earlier response, that disables it for all windows, both local and remoteapp. So basically, I'm asking, is it possible to do it for only the remoteapp windows?
As you can see in the 2nd post you added in your response, he also had to set it up on the client.
Regards, -
Firefox 4 stops opening new windows after browser window dragged to second display
Firefox 4 stops opening new windows after browser window dragged to second display. It's weird. Behavior is fine until I drag any browser window to the attached second display, and after this point it stops opening new windows but will still open new tabs in the same window. Restart fixes it until I drag the window back to the second display.
"Show all bookmarks" stops working too--won't open a new window.
This is after clean reinstall with total deletion of any Firefox/Mozilla folders and the previously installed app and a restart of the computer.
Mac OS X 10.6.7
Firefox 4Pretty sure this is either:
'''Bug 644733'''
or
'''Bug 609405'''
(...and they may be reporting the same thing.) -
Window Splitter and Window Dragging
Hi,
What are window splitter and window dragging?
Regards,
LingzWindow splitters - Adds splitters between iView components that enables their resizing at runtime
Window dragging - Enables dragging and rearranging iView components at runtime -
Radeon troubles with window dragging
Hey everyone,
I'm running kdemod with a radeon mobility hd3650 w/radeonhd driver. I'm definitely a semi-newb and really really confused about xorg/hal but here's a pic of what's happening: (sorry about imageshack :-P )
http://img231.imageshack.us/my.php?image=snapshot1t.png
Here is the xorg.log (I figured out how to get the output)
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux zeeARCH 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri May 8 12:52:01 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(==) No device specified for screen "Screen0".
Using the first device section listed.
(**) | |-->Device "name"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling PS/2 Mouse
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Mobility Radeon HD 3650 rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.0, module version = 1.2.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
R700 : Radeon R700.
M98 : Radeon M98 Mobility.
RV730 : Radeon HD4670, HD4650.
M96 : Radeon M96 Mobility.
RV710 : Radeon HD4570, HD4350.
(II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Option "DRI" "true"
(**) RADEONHD(0): Selected ShadowFB.
(II) RADEONHD(0): Unknown card detected: 0x9591:0x17AA:0x2127.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9591:0x17AA:0x2127: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an M86 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xcfff0000 to 0xb7935000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x17aa SubsystemID: 0x2102
IOBaseAddress: 0x2000
Filename: BR030541.101
BIOS Bootup Message:
M86M DDR3 600E/700M
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffb000
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffb000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536850432 (size: 20480) extends beyond available framebuffer size 268435456
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 600000
(II) RADEONHD(0): Default Memory Clock: 700000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(WW) RADEONHD(0): Direct rendering for R600 and up forced on - This is NOT officially supported yet and may cause instability or lockups
(II) RADEONHD(0): Found libdri 5.4.0.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(EE) RADEONHD(0): RHDDRIVersionCheck: drmOpen("radeon", "pci:0000:01:00.0") failed.
(WW) RADEONHD(0): RHDDRIPreInit: Version check failed. Disabling DRI.
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1", RHD_DDC_2, RHD_HPD_2, { RHD_OUTPUT_UNIPHYA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_PANEL, "LVDS LCD1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_KLDSKP_LVTMA, RHD_OUTPUT_NONE } }
(--) RADEONHD(0): Attaching Output UNIPHY_A to Connector DVI-D 1
(II) RADEONHD(0): LVDS FPDI: 0x1
(II) RADEONHD(0): LVDS Duallink: 0x1
(II) RADEONHD(0): LVDS Grey Level: 0x3
(II) RADEONHD(0): LVDS SEQ Dig onto DE: 30
(II) RADEONHD(0): LVDS SEQ DE to BL: 250
(II) RADEONHD(0): LVDS Off Delay: 500
(II) RADEONHD(0): LVDS 24Bit: 0x0
(II) RADEONHD(0): LVDS Spatial Dither : 0x0
(II) RADEONHD(0): LVDS Temporal Dither : 0x1
(--) RADEONHD(0): Attaching Output UNIPHY_KLDSKP_LVTMA to Connector PANEL
(--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1
(II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output UNIPHY_A
(II) RADEONHD(0): RandR: Adding RRoutput PANEL for Output UNIPHY_KLDSKP_LVTMA
(II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A
(II) RADEONHD(0): Output DVI-D_1 using monitor section Monitor0
(II) RADEONHD(0): Output DVI-D_1 has no monitor section
(II) RADEONHD(0): Output PANEL has no monitor section
(II) RADEONHD(0): Output VGA_1 has no monitor section
(II) RADEONHD(0): Setting UNIPHY_KLDSKP_LVTMA to incoherent
(II) RADEONHD(0): I2C device "RHD I2C line 0:E-EDID segment register" registered at address 0x60.
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at address 0xA0.
(II) RADEONHD(0): EDID data for LVDS Panel
(II) RADEONHD(0): Manufacturer: IBM Model: 2887 Serial#: 0
(II) RADEONHD(0): Year: 2005 Week: 0
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): No DPMS capabilities specified
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.596 redY: 0.347 greenX: 0.335 greenY: 0.543
(II) RADEONHD(0): blueX: 0.158 blueY: 0.143 whiteX: 0.313 whiteY: 0.329
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 120.6 MHz Image Size: 331 x 207 mm
(II) RADEONHD(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
(II) RADEONHD(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 100.5 MHz Image Size: 331 x 207 mm
(II) RADEONHD(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
(II) RADEONHD(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
(WW) RADEONHD(0): Unknown vendor-specific block f
(II) RADEONHD(0): LP154W02-TL06
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff00244d872800000000
(II) RADEONHD(0): 000f0103802115780abca59858558b28
(II) RADEONHD(0): 24505400000001010101010101010101
(II) RADEONHD(0): 0101010101011c2f90d0601a0f402030
(II) RADEONHD(0): 13004bcf10000019452790d0601a0f40
(II) RADEONHD(0): 203013004bcf100000190000000f00b3
(II) RADEONHD(0): 0a32b30a28140100320c0000000000fe
(II) RADEONHD(0): 004c503135345730322d544c303600bf
(II) RADEONHD(0): Found native mode: Modeline "1680x1050" 120.60 1680 1712 1760 1888 1050 1051 1054 1065
(II) RADEONHD(0): Output DVI-D_1 disconnected
(II) RADEONHD(0): Output PANEL connected
(II) RADEONHD(0): Output VGA_1 disconnected
(II) RADEONHD(0): Using user preference for initial modes
(II) RADEONHD(0): Output PANEL using initial mode 1680x1050
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 2560x2560 Framebuffer with 2560 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x01900000)
(==) RADEONHD(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEONHD(0): Using ShadowFB
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEONHD(0): Mapped IO @ 0xcfff0000 to 0xb7935000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0xa7911000 (size 0x10000000)
(WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Mapping DIG2 encoder to KLDSKP_LVTMA
(II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1680x1050" 120.60 1680 1712 1760 1888 1050 1051 1054 1065
None
(II) RADEONHD(0): Query for Conditional Golden Setting: failed
(II) RADEONHD(0): LVTMATransmitterSet: Incoherent Mode not supported, switching to Coherent.
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(**) Option "dpms" "true"
(**) RADEONHD(0): DPMS enabled
(WW) RADEONHD(0): Option "XAANoOffscreenPixmaps" is not used
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event7"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event11"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) RADEONHD(0): EDID data for LVDS Panel
(II) RADEONHD(0): Manufacturer: IBM Model: 2887 Serial#: 0
(II) RADEONHD(0): Year: 2005 Week: 0
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): No DPMS capabilities specified
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.596 redY: 0.347 greenX: 0.335 greenY: 0.543
(II) RADEONHD(0): blueX: 0.158 blueY: 0.143 whiteX: 0.313 whiteY: 0.329
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 120.6 MHz Image Size: 331 x 207 mm
(II) RADEONHD(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
(II) RADEONHD(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 100.5 MHz Image Size: 331 x 207 mm
(II) RADEONHD(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
(II) RADEONHD(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
(WW) RADEONHD(0): Unknown vendor-specific block f
(II) RADEONHD(0): LP154W02-TL06
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff00244d872800000000
(II) RADEONHD(0): 000f0103802115780abca59858558b28
(II) RADEONHD(0): 24505400000001010101010101010101
(II) RADEONHD(0): 0101010101011c2f90d0601a0f402030
(II) RADEONHD(0): 13004bcf10000019452790d0601a0f40
(II) RADEONHD(0): 203013004bcf100000190000000f00b3
(II) RADEONHD(0): 0a32b30a28140100320c0000000000fe
(II) RADEONHD(0): 004c503135345730322d544c303600bf
(II) RADEONHD(0): Found native mode: Modeline "1680x1050" 120.60 1680 1712 1760 1888 1050 1051 1054 1065
(II) RADEONHD(0): EDID vendor "IBM", prod id 10375
(II) RADEONHD(0): Printing DDC gathered Modelines:
(II) RADEONHD(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz)
(II) RADEONHD(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz)
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1680x1050" 120.60 1680 1712 1760 1888 1050 1051 1054 1065
None
(II) RADEONHD(0): Query for Conditional Golden Setting: failed
(II) RADEONHD(0): LVTMATransmitterSet: Incoherent Mode not supported, switching to Coherent.
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
That pic is a little old, and my desktop is so much better than that now, but....
I cannot for the life of me remember what this unwanted window effect is called. it happens when I drag my windows and I obviously cannot enable any desktop effects.
Any words of wisdom?
A side note- I have no idea how to generate log files. I can access them and I know how to put them in a pastebin, but I have no idea how to actually get the full text from terminal (so if anyone can direct me to a decent .log-generation-how-to-wiki, that would be superb)
Last edited by zee (2009-05-08 19:57:39)Your logs are generated automatically by your system as it runs - there is nothing further that you need to do. They are ordinary text files, so you can display them on a terminal using any of the usual tools - cat, less, grep, etc.
-
Finder window dragging tab to desktop
I am curious if anyone else is having this problem.
Maybe my brand new Mac Pro has a graphics issue.
When I drag a tab to create a separate window it creates a miniature version of the window and when I release the window upsizes.
However, it leaves a small version of itself behind.
See the image below for what I am talking about. The two small versions of tabs I dragged persist and will not be deleted until I "killall Finder" or restart the finder. I have tried deleting the workspace and they just move to a different workspace.
My setup:
Anyone have any ideas?
Is this a hardware or software issue?
Graphics card or Yosemite?Ok I am still having this issue even after the Geniuses reset my computer including the firmware. (that was for repeated gpurestarts which have stopped for now).
All software is up to date. Killing the finder will remove the offending ghost image. Restarting the computer removes it but I can always create another one just by moving a tab to the desktop.
Third party software disabled and still I see this until I kill the Finder.
When I move the tab to the desktop it expands fine but leaves the ghost and I get this message in the Console:
12/18/14 7:53:03.412 AM WindowServer[140]: WSGetSurfaceInWindow : Invalid surface 811443408 for window 838 -
Window dragging issues on second display
Hello everyone,
I have secondary display with 1920x1200 resolution and rotated 90° (portrait mode) connected to MB Pro early 2011. After updating to Mountain Lion from AppStore I faced with quite annoying effect on this display: when I drag any window over the desktop it's moving quite jerky. Also all system menus (dis)appearing with pulsing effect. When I drag any window to desktop on MacBook display - everything is smooth and OK.
Also I noticed that during desktop video capturing (using quicktime) overall perfomance degrades significantly: mouse cursor moves lazily, windows movements are really slow.
I'm feeling that this is serious software problem.
Is this known issue? Could someone reproduce it? Any workaround?
HW: MB Pro early 2011,
OS: Mac OS X Mountain Lion,
Secondary display: Dell U2412M, 1920x1200, connected through DisplayPort input.Try repairing your permissions. Go to applications then to the "other" folder then go to disk utility, on the left hand side you will see a white box. Select the second option, usually called "mac HD" with that selected click on "repair permissions" in the center towards the bottom of the screen. Wait for it to complete, then see if this fixes the issue.
SMC:
http://support.apple.com/kb/HT3964
PRAM:
i. Ensure the machine is powered off.
ii. Locate the following keys on your keyboard in preparation for Step 4:
‘command’ – ‘option’ – ‘P’ – ‘R’
iii. Press the ‘power on’ button.
iv. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
v. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up normally. -
Did anyone noticed that you cannot drag an iChat window by its upper right corner? The last 1/4" is dead for me, you try to grab the window from there and it just slips. Everywhere else you can grab it normally. I don't have this problem with any other window in any other application.
It's not a big deal but I was just wondering if I am alone and why so?An Ahh Ha! Moment.
On most other apps that space is for the white/grey/non coloured oblong button that can reveal/hide the toolbar.
See it at the top of Safari or Firefox ?
iChat does not have this on Any window.
It makes it a pain when the Preferences decide to lose their Toolbar of iCons for the different panes as then the only way to get them back is delete the com.apple.ichat.plist
I would guess this is "Dead Space" for the missing button.
(Of course I cant' find another apps to test this theory out right now).
3:49 PM Saturday; May 31, 2008 -
Sidescroll elimination / trackpad window dragging
2 legitimate questions, and a vanity concern tacked on just to keep everything to one thread.
1. I'm trying to figure out if there's a way to eliminate the sidescroll when viewing a folder in thumbnail view, if I max out the window that does the trick, but it seems there should be an option where if I only wanted to see 3 picture thumbnails per row and only had to scroll down to review the entire folder I could do that.
2. I recently went into trackpad settings to turn all my 4 finger gestures such as "view mission control" etc to 3 fingers, but it messed up my ability to 3 finger drag windows around the desktop which I used quite a bit and don't see an option for this in the trackpad preferences, so I put those gestures back to 4 fingers but now I can't drag windows anymore with 3 or any combination. How do I get this back? Ideally I could change it to 2 fingers.
3. I'm on the 2011 mac mini so any traces that these once had a disc drive is uncessesary. I removed "Remote Disc" from showing up under Devices in Finder, but it's still showing up under Devices -> X's Mac mini. It does nothing when I try to eject it. Can't think of anything else to get rid of it. This is far less important than my other two issues I'd just like to remove it if possible for neatness sake.for issue # 1. i see what you mean. here is the fix. open the finder window and then go to the view menu. under "Arrange By" you will see that "none" is selected. if you select to arrange by name, the finder window will rearange the icons and stick to the size of the window. so you will no longer have to scroll left and right, and all the items will be scrollable up and down only.
-
CS6 Problem on Windows Dragging/move
I saw this problem a few day before and this is something that need to pay attention, the problem started when I had a multiple tab to do
a work, then I put some tabs windows and drag to the left to make my drawing more easier base on the reference on the left
and suddenly the tabs goes crazy and always started to move up
I've found the solution by autohide the taskbar, but it really not confortable because taskbar are usefull at the sametimeHi All,
Its a known issue and we are working on this.
Please refer this document for the workaround : http://helpx.adobe.com/photoshop/kb/images-pop-menus-moved.html
Thanks,
Baljeet -
Photoshop 13.0.5 window dragging issue (OS X)
Hello everyone! I'm having one small issue abou this: when I drag an open document window partially off the screen, somehow like this:
then release it, and then drag back, the sides that have been hidden (outside the screen) won't redraw until I release mouse button:
Haven't noticed such behavior until 13.0.5 (upgraded directly from 13.0.1).
Thanks.What's your exact version of the OS, and what are the model and specs of your video card?
The reason I ask is that I see the very same behavior in Photoshop 13.0.5 under OS X Lion 10.7.5, but then I know I have an underpowered video card with only 256 MB of VRAM, and Photoshop never fails to inform me so every time it launches.
A video card upgrade with 1 GB of VRAM should be here by Tuesday or Wednesday. I'll report back once I install it.
EDITED to add 2nd and 3rd paragraphs.
Message was edited by: station_two -
Changing maximized window drag sensitivity
While I love the new snapping features Windows 7 has, I find that it's too sensitive to drags when clicking titlebar of maximized windows - I often click a maximized window's titlebar, only to see the whole screen flicker as the window is restored, and then maximized again. It appears that the drag is currently initiated if the mouse is moved just 1 pixel in the vertical direction, which seems way too low to me - is it possible to change this to something saner?
The Misc. forum in this group has a 'comments' thread. You can add your experience, to help the dev team identify problems.
Have Comments about Windows 7 RC? (Part 4 - Do not post questions in this thread)
Rating posts helps other users
Mark L. Ferguson MS-MVP -
I have a JFrame with a bunch of little green and red lights (icons) on JLabels. It essentially shows the status of somethings with those lights. They get updated via UDP messages...about 112 a second. I only repaint when a status changes (so i don't get bogged down with repaints).
I have a class that extends thread, with the priority set to 1. This thread receives the UDP messages and processes them. Lastly I have a Swing Timer that is fired 1 second after the last message is received, but if a new one comes it, the timer is reset. If no messages are received for 1 second, the timer is fired.
All goes well until someone grabs the frame and starts dragging it all over...the CPU usage goes up, and my thread processing the UDP messages comes to a hault and the timer gets fired. Even though i set the priority to 1, it still does this. Why does dragging the frame cause this seperate thread to pause? This happens in both Windows (paints while dragging) and on Solaris (does not paint while dragging). The CPU usage is sitting around 50% while dragging the window all over, so it's not like there isn't enough CPU to do this. And where it freezes in the code is not consistant, for instance sometimes it pauses on timer.reset(), sometimes on multiSocket.receive(packet) (not swing related), and sometimes in other places.
Is there any way to prevent or correct this issue?
J2SDK 1.4.2nm, prirotiy 1 is the lowest priority... 10 works great.
-
CS6 Serious Bug on Windows Dragging
I saw this problem a few day before and this is something that need to pay attention, the problem started when I had a multiple tab to do
a work, then I put some tabs windows and drag to the left to make my drawing more easier base on the reference on the left
and suddenly the tabs goes crazy and always started to move up
I've found the solution by autohide the taskbar, but it really not confortable because taskbar are usefull at the sametimeKnown bug. Adobe working on it.
Maybe you are looking for
-
I've searched the help topics and through the tutorial and now I need a little help with context-sensitive help. This is my first JavaHelp application. Here is the error I'm getting when I hit the F1 key... javax.help.BadIDException: Not valid ID: ab
-
Remove blank spaces in excel output file
it is a BOM report and the output is into a excel file. problem with the excel file output is : i gives blank spaces sometimes after the number and sometimes before the number... so, how can i remove those blank spaces for the values. ive nearly 15 c
-
Using Contract with SRM-MDM using several Web Service ID's
Dear Experts, ALL of our Contracts were created and still being created by adopting products from CCM, meaning BBP_PDIGP-CATALOGID holds the Web Service ID and BBP_PDIGP-CATALOGITEM holds the Catalog Item GUID. When trying to create a Shopping Cart b
-
Kindly let me the error in this code
FORM transaction_bdc . DATA : v_cnt(2) TYPE n, v_bst(2) TYPE n, v_bn TYPE i, v_bstpo(25), v_ebtyp(25), v_menge(25), v_eeind(25), v_xblnr(25), v_xblnr1(25), v_ebelp(2) TYPE n, v_ebelpt(2), v_menge1(11), v_ebt TYPE i, v_ve
-
Cannot Retrieve Active Directory Groups
Hi All I recently connected my ACS deployment to Active Directory 2003. However when I try to add the active directory groups for group mapping, i.e. navigating to Users and Identity Stores > External Identity Stores > Active Directory > Directory Gr