Window Eyes and Flex

Hi,
Can any one provide me the configuration settings for window eyes to make flex components accesseble and to read and tab properly.
thanks
-balu

Window splitters - Adds splitters between iView components that enables their resizing at runtime
Window dragging - Enables dragging and rearranging iView components at runtime

Similar Messages

I can't remove Bing. I've tried Control Panel, the article "Removing the Search Helper Extension and Bing Bar," and I have had no luck for Windows 7 and Firefox.

I can't remove Bing. I've tried Control Panel, the article "Removing the Search Helper Extension and Bing Bar," and I have had no luck for Windows 7 and Firefox.
I wish I could share the two screen shots I took, but this question site doesn't have the option, so I guess I'll describe where Bing is showing up.
In the left hand of my browser, just to the right of the back and forward arrows, there is speech bubble with a black eye ball or something. I found out it's Bing-related by clicking on it. There is no option to remove it with either left or right clicking on it.
Also, in the right hand corner of my browser, at the very end of all my tabs, there is a white rectangular box with an orange "b" and a magnifying glass symbol. It will not respond to anything I try to do to it either, but if clicked it opens a new tab with a Bing search dialogue box.
Finally, any new tab I open automatically opens to the Bing search dialogue box (versus Google).
I need to get specific, step-by-step instructions for removing this Bing stuff from my computer. As I said, I have already gone through all steps outlined in the article I mentioned above as well as not been able to locate Bing in my control panel.
Please help. I'm certain others are having this same issue. I use Windows 7 and Firefox. Thanks.

Apologies for the formatting there. No idea what went wrong...

Windows 7 and classpnp.sys safe mode loop.

Hello,
First of all this is an outline to the system I am running.
Acer Aspire X1800
Brought as a Windows Vista Home Premium 32bit, has now been upgraded to the equivalent in Windows 7.
Intel® Core™2 Quad processor
NVIDIA® GeForce® 7100 and nForce® 630i
4 GB of DDR2 667/800 MHz SDRAM (single-channel support on two DIMMs)
Serial ATA hard disk 1 TB
AMI PnP BIOS compatible with SMBIOS 2.4
PCI Express® 2.0 x16 slot
PCI Express® 2.0 x1 slot
Integrated NVIDIA® GeForce® 7100 graphics solution
PCI Express® 2.0 x16 graphics card support (low-profile)
I have been running Windows 7 now for some time a month or two and have no problems until now. I wanted to put my computer into safe mode so I can install the second disc of Fallout 3 Game of the year Edition. Frist of all I restarted the computer and used the F8 trick which did not work. The computer just booted into regular old Windows 7. So then I went through the msconfig way of things.
Now it is important to note that I had this problem when installing Fallout 3 on the same machine but running Vista. However the computer managed to "fix" it self back then.
The computer loads through all the drivers until it gets to C:\windows\system32\drivers\classpnp.sys
It stops loading here and tries to go into safe mode. The computer then comes up with a message saying entering Windows safe mode (or words to that effect) and lists some of the system details. The screen then changes to a blank screen with a mouse cursor in the middle of it. The computer then shuts down and begins to restart itself. It has gone into a infinite loop of restarts.
Ideas I have tried.
Pressing F8 brings up the boot menu, i have tried all options available in that. Nothing worked.
Interrupting the start up with a fake power cut. This resulted in the computer showing two options. Start Windows normally and start Windows recovery. Neither worked.
I have tried renaming the problem file C:\windows\system32\drivers\classpnp.sys to C:\windows\system32\drivers\classpnp.old
This resulted in the computer loading until the next value C:\windows\system32\drivers\disk.sys The computer then did all the usual loading. However before restarting the it showed the dreaded blue screen of death. It was over before i could see the error message that it contained.
I have tried resetting to a prior system date. this does not work either.
Other than that I have not been able to get into windows or anything else. The reason I am able to post this is a have access to another computer for the mean time.
Any ideas on this would very appreciated
Cheers
*EDIT*
Because the computer is Acer it should have a working E Recovery on it. However i can't remember if i deleted this or not. Will try using the hidden partition in the near future. This will most likely send me back to Vista but its a risk I am willing to take at this stage.

Hello Limbix
Thank you for your initial problem and the follow-up discussion on such a conundrum of a problem. As evidenced by the number of hits under Google for "Windows 7 boot sequence classpnp.sys" and 0 fixes, this problem is systematic of this OS. As
such, this is a ticking time bomb waiting for the most inopportune time to strike.
Furthmore, this problem has been known since RC1 of Windows 7. The problem still persists and there is no known remediation method.
KB 925810 is a unique solution when the OS is healthy. When this phenomena occurs, KB 925810 is a hoax for Laptop users and systems purchased from a vendor without a hardcopy of the OS media. For Home builts with a purchased hardcopy of the OS, KB 925810
is the option. But the option is to reinstall as opposed to a repair.
Using Ubuntu, to effect change by replacing CLASSPNP.SYS with a 6.1.7600.16385 version has produced mixed results. In addition, the method of downloading any file is fraught with problems of possible infection or worse yet a trojan. This essentially
leaves Option 2 and 4 as the SOP for this OS failure mode on laptops.
Problem:
New Toshiba A500 i7 with 8 Gig - Windows 7 Professional (Business)
A series of three critical patches were deployed to this machine at 9:30 pm on 5/26/2010 from Windows Update.  At 6:30 am 5/27/2010, the machine was discovered to have restarted and was stuck at the Starting Windows logo. Here were
the initial steps taken to remediate the problem.
Step 1. CTRL-ALT-DEL was used multiple times to restart the machine.
Results: The machine did not restart.
Step 2. Power recycled the machine.  Windows 7 offered to Launch Windows Repair on the OS. The repair was selected and completed with a request to restart.
Results: The machine stops at the Starting Windows logo. Still stuck.
Step 3. Restarted the machine through a power recycle. Pressed F8, selected last known good and restarted.
Results: The machine stops at the Starting Windows logo. Still stuck.
Step 4. Restarted the machine through a power recycle. Pressed F8, selected Advanced options.
Results: No options were available.
Step 5. Restarted the machine through a power recycle. Pressed F8, selected Boot loggin and restarted.
Results: The machine stops at the Starting Windows logo. Still stuck.
Step 6. Restarted the machine through a power recycle. Pressed F8, selected Safe Mode with Networking.
Results: The machine's last entry for the loading list was on
CLASSPNP.SYS and hung up.
Step 7. Began researching for the Windows 7 boot loading list for the before and after sequences to see if CLASSPNP.SYS was the culprit.
Results: Found this discussion and many more. Spent too much time researching for a solution. Most ended in silence.
Step 8. Considered taking the STATA drive and putting into an external enclosure.
Results: Did not take this step as the machine is under warranty. It was purchased in April, 2010.
Step 9. Going back over the Google research, discussion
http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/64a52415-f9aa-448e-b79c-f4d9d27836c3 has Moderator Tim Quan MSFT stating that
"To obtain the phone numbers for specific technology request, please refer to the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS"
This support site will take a user to a list of vendors. The Toshiba link was selected. The link is the Toshiba home page. The Support link was
selected and a direct call was made to Toshiba at 7:30 am on 5/27/2010. A Toshiba case was opened. All 9 steps were presented to the support person and as directed the machine was put into a Factory reset mode.
Results: The machine has completed rebuilding as of 11:11 am 5/27/2010. Windows update patching is continuing the assult to be "secure".
Comments: One thing is certain, to be secure in one sense is have a machine in an inoperable state. However business cannot operate in an inoperable state. Neither
can a business operate in an insecure state. So, to receive an OS patch which causes the machine to be inoperable, has the quest to be secure been reduced to inoperability?
Suggestion: This problem needs more eyes and a better tracking method.
1. Is this a vendor issue, e.g. Motherboard, Memory, Hardware?
     1a. Is this lot specific?
     2a. Is there a driver mismatch?
2. Is this a process/sequence issue?
3. Is there a recovery process other than "Scorched earth"?
Sincerely,
John
risc of KY

I cannot get my screen reader to read my PDF format at all. I am using Window-Eyes 9.0 Screen Reading Program for the blind.

I cannot get my screen reader to read my PDF format at all. I am using Window-Eyes 9.0 Screen Reading Program for the blind.
HELP!!!

For information regarding Accessibility, see here:
http://www.oracle.com/us/corporate/accessibility/products/index.html
You can also find additional configuration in the older Forms documentation, however most will still apply in newer versions although file version references and file locations may differer.
http://docs.oracle.com/html/B10668_05/chap_forms.htm#g1095470

Adobe AIR support for Windows RT and USB

We want to develop an cross platform application. We found that Adobe AIR supports cross platform development for Windows, iOS and Android.
We wanted to know wheather
1) reading and writing to USB port is possible with Adobe AIR?
2) Adobe AIR has support for Windows RT development?
Thanks in advance.

I wrote before about my concerns with Adobe AIR, but here is a short summary:
- no road map and no clear plans for the platform,
- support of new devices is often late, Intel chipsets are not supported on Android,
- debugging on a device is a pain,
- inadequate build times for iOS, app package is quite large,
- list of mobile UI components is very limited and UI experience is far from native,
- native extensions are a possibility but still far from perfect (imagine using three very different development platforms all in one app), no debugging,
- performance is not good if you use a lot of Spark components in your app,
- Flash Builder is pretty bad as the development environment,
- ActionScript3 is a poor, outdated language that encourages bad coding practices.
I ruled out HTML5 frameworks for the same reason as you stated above. Last few months I've been working with Xamarin MonoTouch and I think it is perfect for my projects. 100% native UI experience, about 80% of the code is shared among the platforms, iOS, MacOSX, Android and Windows 8/RT are supported. Took me about 2 months to convert my 2Mb ActionScript Adobe AIR project to Xamarin MonoTouch (iOS). The entire process was fun and painless. Now thinking to port to MacOSX and Android. My iOS app is already at the App Store, no major complains so far.
On a down side, Xamarin is expensive for an indie developer with low revenues. You need to pay $300 per year per each platform (iOS, Android, Mac). Plus, you need to develop UI layer separately for each platform, so only part of the code is shared. But I decided it is a way to go for my projects and it's been a very positive experience so far.
As for my professional development, Xamarin offers quite a bit more as well. I get to work with C#, .NET, iOS SDK, Android SDK all in one platform. With Adobe tools you only get to know ActionScript and Flex/Spark framework. Very rarely I see that as a desired qualification. It is like a trap. Your boss tells you to develop a few projects with Adobe tools, it sucks you in for a few years and suddenly you realize that your market value declined dramatically and there is no easy way out of this mess.

[svn:fx-4.x] 15044: Mirroring Window Gripper and DateField bug fixes

Revision: 15044
Revision: 15044
Author:   [email protected]
Date:     2010-03-25 17:15:30 -0700 (Thu, 25 Mar 2010)
Log Message:
Mirroring Window Gripper and DateField bug fixes
http://bugs.adobe.com/jira/browse/SDK-25719 - The gripper does not show up in an MX Window that is mirrored and using flex chrome
Added an mx_internal property to Button to track if the Button should modify the layoutDirection of its skins. MX Window and MX WindowedApplication both set this property to undefined. This is the only skin/icon in the halo and spark framework that inherits its layoutDirection from its parent. All others have layoutDirection of LTR.
http://bugs.adobe.com/jira/browse/SDK-25995 - DateField opens drop down on wrong side when layoutDirection = rtl
Added check if left edge of the dropDown exceeds the left screen bounds.
QE notes: n/a
Doc notes: n/a
Bugs: SDK-25719, SDK-25995
Reviewer: Kevin
Tests run: checkintests, DateField
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25719
    http://bugs.adobe.com/jira/browse/SDK-25995
    http://bugs.adobe.com/jira/browse/SDK-25719
    http://bugs.adobe.com/jira/browse/SDK-25995
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/airframework/src/mx/core/Window.as
    flex/sdk/branches/4.x/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
    flex/sdk/branches/4.x/frameworks/projects/framework/src/mx/controls/Button.as
    flex/sdk/branches/4.x/frameworks/projects/framework/src/mx/controls/DateField.as

Originally posted by: hansm.science.uva.nlDELETE
In article <f7fd6k$kq5$[email protected]>,
"Igor Vinnykov" <[email protected]> wrote:
> We are pleased to announce a new release in the 1.1.x stream: version 1.1.3.
> Main target of 1.1.3 version is compatibility with Eclipse 3.3 and Mylyn.
> Starting from this version JavaHL becomes the default SVN client. This change
> caused by licensing topics and future project transfer to the eclipse.org:
> previous default client JavaSVN/SVNKit doesn't have a license, which allows
> defining it as default client, distributed from the eclipse.org.
>
> Important: Subversive is prepackaged only by JavaHL binaries for Windows. If
> you work under Linux, MacOS or other operation systems you should
> build/install required JavaHL binaries by yourself. JavaHL is a part of
> official Subversion source distribution available at
> http://subversion.tigris.org/project_packages.html.
I am sorry but this leaves me in the dark. On the site mentioned above I cannot
find something like a download for javaHL (on MacOSX especially).
Although I did install subversion 1.4.4 from the source distribution I do not
seem to have a javaHL binary. How further?
Hans van der Meer

QTP 11 and Flex 4.5

I am using QTP 11, Windows 7 64bit PC, Flex 4.5, on IE9. I am able to identify objects in the record mode and they do get added to the local object repository. However, when using QTP with Object Spy or (Object Repository > Object > Add Objects to Local), I get the error "Internet Explorer has stopped working". The error locks the whole system and a restart is forcfully required.
The problem is persistent even with the flex store provided by Adobe: http://examples.adobe.com/flex2/inproduct/lcds/flexstore/flexstore.html
The image contains the plug-ins and patches which I have all successfully installed.
Is anyone able to assist me with this issue? I have contacted HP but they mentioned that the Flex plug-in is maintained by Adobe.

Earlier we were not facing the same issue but after making the changes mentioned by PasaD626 Oct 28, 2013 3:19 PM (in response to PCS.Secure), we were able to resolve this issue. Please check you must have valid admin rights.
Thanks to PasaD.
Can any one help me to resolve GetROProperty(abs_x) empty value issue in QTP11 and Flex 4.5?
[FLEX-30478] QuickTest Professional (QTP) 11 with Flex Addin 4.5 no longer returns a value for width property when using…

Using windows vista and all the graphics i create the colours look blurry?

Hi everyone,
I have just started using windows vista and i have noticed
that when i create graphics using fireworks 8 that when i view them
either on dreamweaver 8 or just using the windows viewer that the
graphics and colours in the graphics look very blurry?? Does anyone
know why this should be? As i was creating graphics successfully
before with fireworks 8 when i was using windows xp and had none of
these problems at all.
Any advice would be most welcome.
Many thanks,
Gordon.

Fireworks is not compatible with Aero. So, whenever you start
Fireworks,
Vista will warn you that Areo will not work and to use
Fireworks you must
disable it. Once you close Fireworks, Vista will
automatically re-enable
Aero. Obviously not a huge issue, but it is kind of annoying
for the screen
to flicker and lose all your pretty eye candy every time
Fireworks starts.
"Gordonuk" <[email protected]> wrote in
message
news:g6ithu$3eb$[email protected]..
> Hi everyone,
>
> I have just started using windows vista and i have
noticed that when i
> create
> graphics using fireworks 8 that when i view them either
on dreamweaver 8
> or
> just using the windows viewer that the graphics and
colours in the
> graphics
> look very blurry?? Does anyone know why this should be?
As i was creating
> graphics successfully before with fireworks 8 when i was
using windows xp
> and
> had none of these problems at all.
>
> Any advice would be most welcome.
>
> Many thanks,
> Gordon.
>

Jazz and Flex Builder 3

(I've also posted this in the forums over at
jazz.net)
I'm trying to get Flex Builder 3 to work with Rational
TeamCentral (the beta client for the Rational Jazz system). Jazz is
an IBM Rational project to build a scalable, extensible team
collaboration platform for integrating work across the phases of
the development lifecycle. Alas, I'm running into some problems
under Windows. I'm doing all this with TeamCentral Beta2a, BTW.
My first approach was to unzip the Beta2a client on my
Windows laptop and install the Flex Builder 3 plugins. In this
configuration I was able to get Jazz to work, but whenever I try to
build anything using Flex I get what looks like a Xerces versioning
problem. Here's a part of the exception I get whenever Flex tries
to build anything in this configuration:
ENTRY com.adobe.flexbuilder.project 4 43 2008-03-02
09:31:11.062
!MESSAGE Uncaught exception in compiler
!STACK 0
java.lang.IllegalAccessError:
org.apache.xerces.util.XMLAttributesImpl$Attribute
at java.lang.ClassLoader.defineClassImpl(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:228)
at
java.security.SecureClassLoader.defineClass(SecureClassLoader.java:148)
at
java.net.URLClassLoader.defineClass(URLClassLoader.java:557)
at
java.net.URLClassLoader.access$400(URLClassLoader.java:120)
at
java.net.URLClassLoader$ClassFinder.run(URLClassLoader.java:962)
at
java.security.AccessController.doPrivileged(AccessController.java:275)
at java.net.URLClassLoader.findClass(URLClassLoader.java:488)
at
com.adobe.flexbuilder.project.sdks.FlexClassLoader.findClass(Unknown
Source)
at java.lang.ClassLoader.loadClass(ClassLoader.java:607)
at
com.adobe.flexbuilder.project.sdks.FlexClassLoader.loadClass(Unknown
Source)
My next attempt was to use my Macbook and install the
TeamCentral client with the Flex Builder 3 plugins (same
configuration that I had just tried on Windows). This worked
perfectly - both Jazz and Flex were very happy, and I could be
productive here. Unfortunately, most of my team members are Windows
developers, so this is not a viable solution for them.
Now back to Windows. I installed the Flex Builder 3
standalone eclipse instance and noticed that it uses Sun JDK 1.5,
so I wondered if the JDK was the culprit. I replaced the JDK to use
the IBM 1.5 JDK (same as TeamCentral Beta2a). The standalone Flex
Builder 3 worked.
My next experiment was to use the Sun 1.5 JDK on TeamCentral
with the Flex Builder plugins. The performance seemed very
sluggish, but Flex seemed happy. Jazz was a different matter. I
could connect to a repository and connect to a project area, but I
couldn't do anything after that. I couldn't see any workspaces that
I had, nor could I look at streams, work items, etc.
I'm out of things to try at this point. My ideal solution
would be to figure out how to resolve the Xerces incompatibility,
but I'm open to any other ideas that people might have. We've
discussed the idea of having separate Jazz and Flex instances
running to get the Jazz features, but running both Eclipse
instances is quite expensive resource-wise, so an integrated
solution is the best.
Thanks in advance!
Tom Frauenhofer, [email protected]
Senior Software Engineer, IBM Research

No ads please, blocked.

Slightly bent frame on T61, causes many creaks and flexes

After using my Thinkpad T61 for about 2 months, I just knew there was something that didn't feel quite right about the build quality. The palmrest showed a noticeable amount of flex, and one of the rubber feet was elevated 1-2mm off any flat surface (only the center part would touch the table). This basically meant that the frame wasn't completely straight on my Thinkpad.
I compared my Thinkpad to 2 from my friends; one is a 14.1" just like mine (but integrated graphics) and shows absolutely no flex in the classis. The other, a 15.4" T61, showed a very slight bit, but much less than mine.
What will Lenovo do to fix the bad build on my T61? I am in college right now, so it would be inconvenient unless Lenovo could cross-ship me a new unit. However, the bad build quality on mine really annoys me, especially with the Thinkpads' reputation for great chassis quality. The entire right side of my laptop literally moves up and down about 3-4mm if pressed on, even lightly.
Also, would Lenovo let me keep my HDD? That way, I could just pop it into the replacement without having to worry about backing up work or re-installing Windows all over again.
P.S. The headphone jack on mine apparently seems to be a little faulty also; I have to orient my headphones at a very precise angle, or I hear a lot of hissing in the background.
Thanks in advance
Here is a picture of the "bent" right side; notice that the rubber feet don't make full contact with the table. I've tried this on many flat surfaces and it creaks and flexes whenever I put my right hand on the palmrest.
Picture of right side; notice the elevation (Picture was taken from below so in reality it is WORSE ...
Picture of left side; notice it makes full contact with table
Message Edited by myang322 on 10-18-2008 01:48 PM

Hello,
yes, the T61 have got some flex at the right side above the hdd.
R models are heavier but have little flex, the T model are made out of very light
and carbon enhanced plastic materials. You can try to put a piece of thick paper under the palm rest.
The chassis and audio problem have to be repaired and I would suggest to send it to depot.
Please mention your palmrest flex also.
You can dismount your hdd to keep it at home. It´s a CRU (customer replaceble unit).
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Parameters exchange between swc and flex

Hi,
I have to import my flash app (a simple game) inside flex. I red somewhere that best way to do this is by importing .swc file into flex library path. So I did this. Now I can use .swc as a AS class and I can read .swc variables as class properties. This is helpfull becouse I need to read the game's score at the end. But what I'm missing is how to pass parameters (variables values) into .swc ?? Is that possible at all?
My game have options window made in flex and I need to pass these options to the .swc game.I know that I could make an options window in flash, but in this case it has to be in flex.
Please help

In the skinnable container button click dispatch event as below:
FlexGlobals.topLevelApplication.dispatchEvent(new Event("hello", true, true));
And in main application onCreationComplete() event register event handler as :
FlexGlobals.topLevelApplication.addEventListener("hello", onHello);

Build the connection between Arduino and Flex 4.0 via JSON

Hi,
I try to make a connection between arduino and Flex 4.0, I included the JSON lib and also as3corelib.swc to Flex. When I run the Flex file the connection between PC to arduino is working (I can see it in SERPROXY window) and also I don't have any problems in Flex window, I added the SWF file of Flex to the list at //http://www.macromedia.com/support/documentation/tr/flashplayer/help/settings_manager04.htm l, Bu the reading result is not shows in the SWF,    I couldn't understand why !, thanks for help
here the code
package
import com.adobe.serialization.json.JSON;
import flash.display.Sprite;
import flash.errors.*;
import flash.events.*;
import flash.net.Socket;
import flash.text.TextField;
public class deneme extends Sprite
{private var magnetic:Socket=new Socket("localhost",5331);
private var magneticValue:Number=0;
private var distance:Number;
private var newText:TextField=new TextField();
private var listText:TextField=new TextField();
private var MNx:Number;
private var MNy:Number;
private var MNz:Number;
private var d:Object={"x":null, "y":null, "z":null};
public function deneme()
   socketDataHandler();
private function socketDataHandler():void
   newText.text=magnetic.readUTFBytes(magnetic.bytesAvailable);
   d= JSON.decode(newText.text);
   MNx=d["x"];
   MNy=d["y"];
   MNz=d["z"];
   listText.x=10;
   listText.y=10;
   listText.width=600;
   listText.height=100;
   listText.text=newText.text;
   addChild(newText);

package
{    import com.adobe.serialization.json.JSON;
import flash.display.Sprite;
import flash.errors.*;
import flash.events.*;
import flash.net.Socket;
import flash.text.TextField;
import mx.rpc.events.ResultEvent;
    public class deneme2 extends Sprite
        private var newText:TextField=new TextField();
        private var listText:TextField=new TextField()
        private var magnetic:Socket=new Socket("localhost",5331);
        private var MNx:Number;
        private var MNy:Number;
        private var MNz:Number;
        private var d:Object={"x":null, "y":null, "z":null};
        public function deneme2()
             magnetic.addEventListener(ProgressEvent.SOCKET_DATA,getDATA);
         private function getDATA(event:ProgressEvent):void
            newText.text=magnetic.readUTFBytes(magnetic.bytesAvailable);
            d= JSON.decode(newText.text);
            MNx=d["x"];
            MNy=d["y"];
            MNz=d["z"];
            listText.x=10;
            listText.y=10;
            listText.width=600;
            listText.height=100;
            listText.text="X="+String(MNx)+" Y="+String(MNy)+" Z="+String(MNz);
            addChild(listText);

ColdFusion RDS and Flex Builder 2

Hello everyone.
I try for 3 days to get this running but I keep getting the
same error:
"The RDS server was successfully contacted, but your security
credentials were invalid."
The documentation says that if you are using ColdFusion MX
7.0 or earlier, you would get this message.
But I am using the ColdFusion MX 7.0.2 Developer Edition,
Running under IIS6 on a Windows 2003 server Standard.
Please note that the ColdFusion and Flex Builder 2 are not on
the same computer and it is not possible for me to install CF on
the local computer.
If I try the Dreamweaver RDS it works fine. So I know there
is nothing wrong with the password, the Host Name or port 80.
Can someone please help me?
Thanks.
Sam

anyone??

I install window 8 and Unfortunatly all drive format. And all drive mix, now i have only 1 DRIVE C. I want Bit locker Drive's data Back

Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
so please guys help me how can i get back data from bitlocker protected drives.
please please help me.

Hi,
I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
that you store the recovery information in AD DS or in another safe location.
Please refer to the link below for the statement:
http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
Roger Lu
TechNet Community Support

A hardy ghost of Firefox is apparently running in my computer and I am unable to open Firefox, even after Window restarts and an uninstall/re-install. How do I find and fix this problem?

What happened first is Firefox was revving and using most of my CPU, ultimately "not responding" too easily and for too long, so I closed it in order to reopen it, but Firefox remained running in background (Task Mgr, Processes) after closing, continuing to use almost all my CPU, so I ended the process in Task Mgr.
When I went to re-open it, window opened and told me Firefox could not be opened because another "instance"(?) was still running, to close it or restart Windows. I couldn't close it because I already closed it AND ended the process, so I restarted Windows.
When I tried to open Firefox, I got the same pop-up. I think I restarted Windows one more time, and then uninstalled Firefox, except for my personal settings (in order to save the bookmarks, which I couldn't find in the Firefox folder in Program Files (only Favorites, which were not my bookmarks; I later wondered if they were part of the Firefox add-on "Add This" --??).
I then uninstalled Firefox and re-installed it. When I tried to start the newly re-installed program, I had the same pop-up telling me Firefox was already running and to close it or restart Windows.
I searched my computer folders for anything that might help, did a Search of the computer for "Firefox", and was given some Firefox folders and if they weren't from the new re-install, I deleted them. One thing I noticed was that the program folder did NOT have the program (Firefox.exe) icon to start Firefox.
I uninstalled Firefox and had to resort to using Internet Explorer, which I do NOT like. My rich library of bookmarks are who knows where.
I don't know if this is related, but in searching my computer's Administrative Services and Component Tools (and the like) hoping to find something that would help me fix Firefox, I inadvertently learned that "MMC could not create the snap-in. The snap-in might not have been installed correctly. Name: .NET Framework 1.1 Config."
Please help me get Firefox back and figure out what is going on in my computer that led to this. I am a basic user and not techno-computer saavy, so if anyone can help me with this, please give me step-by-step bonehead instructions.
Thank you so much for any help you can offer!

Make sure that Firefox is set as the default browser.
*http://kb.mozillazine.org/Default_browser
*https://support.mozilla.org/kb/How+to+make+Firefox+the+default+browser
*https://support.mozilla.org/kb/Setting+Firefox+as+the+default+browser+does+not+work

Window Eyes and Flex

Similar Messages

Maybe you are looking for