Window logon termination status 0xc0000135

T43 Laptop. Was working fine. Possibly occurred after closing up and going into Hibernate mode. Get this error on power up. Will not boot in safe mode. Already tried Rescue Recovery and restored from ext drive all system files, driver files.. That all seems to work with no problem. But will not complete the boot. Error takes place after WINDOWS logo start up then when it goes to what I assume is login page it errors out..

You should tri renaming any hiberfil.sys files at your %systemdrive%, since it won't boot than mount the drive separately by booting another drive in your Ultrabay or removing your hdd to be mounted as a data disk and rename hiberfil.sys to anything else and move it to a subdirecotry from the root of C:\ to be safe.
don't delete it since it may be valuable if you need it later but could also contain the cause of your crashing.
You can avoid all of the displaced drives by booting a Bart, Knoppix or Slax to name a few distro's to access the filessystem and modify / possibly delete later hiberfil.sys which is where your hibernation status is kept.
Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

Similar Messages

Remote Desktop disconnects immediately. Error 4005; Windows logon process has unexpectedly terminated.

Hi, I have always been able to remote into my pc (Win 8.1) using remote desktop. Just recently this stopped working. Either I get a blank screen for about 10 seconds and then it closes or the connection closes immediately. Every time this happens I get error
4005 in the event log; Windows logon process has unexpectedly terminated. It seems the remote desktop stopped working after the last set of Windows updates were applied. But no other web searches indicates anyone else has had this problem recently. I've also
read the Windows Server document or error 4005 which suggests my registry may be corrupt or a service may be stopped but this does not seem to apply to my situation. I'm stumped and without being able to remote into my pc from my office I can't do my job.
Any suggestions would be greatly appreciated.
UPDATE: After installing a new required Windows update and a bunch of optional Windows updates (that I had been ignoring), the problem has been fixed. I'm guessing which ever Windows update broke Remote Desktop was fixed in the latest update(s).

Hi arzoo1,
So you have checked the steps mentioned in the article below?
Event ID 4005 — Windows Logon Availability
You may take a try with Dism /online /cleanup-image /resorehealth command and then check if issue insists.
For Windows Update related, please consider system restore or startup repair.
Try to boot into clean boot and then remote again to check if issue insists.
Best regards
Michael Shao
TechNet Community Support

Microsoft // Winlogon 4005 (The Windows logon process has unexpectedly terminated) on one Windows Server 2012 VM with working RDS roles installed

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

Hello experts,
I have deployed all essential RDS roles and features on one Windows Server 2012 Virtual Machine
a few months ago and I recently ran into issues with users not being able to access it through RDP all of a sudden after entering credentials successfully.
Every time that happens I get an event ID Winlogon 4005 (The Windows logon process has unexpectedly
terminated). I am also receiving but not all the time event ID 6000 and 6003 referring to being unable to handle critical or normal events from AUinstallAgent.
Any help on this problem would be greatly appreciated.
Thank you in advance for your support.
Massimiliano

How to calculate number of threads running on Windows 2000 terminal?

How to calculate number of threads running on Windows 2000 terminal for the oracle process?
I have installed Oracle 9i DataBase with 6 patch(9.2.0.6.0) on Windows 2000 Terminal.
But,after database is started up, when i check up the sessions in v$session view.
It is showing like for SYSTEM osuser alone, 10 ORACLE.EXE sessions running on this server machine in active state.
Why it is creating 10 ORACLE.EXE sessions for a single Oracle Server.
This is the output of v$session view.
SQL> select terminal,osuser,status,sid,serial#,program from v$session;
TERMINAL OSUSER STATUS SID SERIAL# PROGRAM
IMGDBSVR SYSTEM ACTIVE 1 1 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 2 1 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 3 1 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 4 1 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 5 1 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 6 1 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 7 1 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 8 1 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 9 1 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 10 1 ORACLE.EXE
SUGANTHI_DBA suganthi ACTIVE 11 91 sqlplusw.exe
11 rows selected.
SQL>

This is how i have related these two views:
SQL> select s.terminal,s.osuser,s.status,s.paddr s_paddr,b.paddr p_paddr,s.program
2 from v$session s,gv$bgprocess b
3 where s.paddr=b.paddr;
TERMINAL OSUSER STATUS S_PADDR P_PADDR PROGRAM
IMGDBSVR SYSTEM ACTIVE 33AF2270 33AF2270 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 33AF2654 33AF2654 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 33AF2A38 33AF2A38 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 33AF2E1C 33AF2E1C ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 33AF3200 33AF3200 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 33AF35E4 33AF35E4 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 33AF39C8 33AF39C8 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 33AF3DAC 33AF3DAC ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 33AF4958 33AF4958 ORACLE.EXE
IMGDBSVR SYSTEM ACTIVE 33AF4D3C 33AF4D3C ORACLE.EXE
10 rows selected.
SQL>
Here, It shows 10 sessions are running.
Whether this means 10 threads are running on the particular server or not?

How to remove the pop-up window ''Wireless Radio Status" for t430s

Hi, I have owned my t430s for now about 2 years without any major complaints recently I've had to use the fn + f5 function quite frequently, because of my poor internet connection. so that way i can reset which signal I want to choose because the default signal I am connected to is not mine. My problem is similar to what is posted here: https://forums.lenovo.com/t5/X-Series-Tablet-and-Helix/how-to-remove-the-pop-up-window-Wireless-Radio-Status/td-p/1191059 I really want to get rid of the pop up for this feature, I've tried to follow what the other thread user's have done and try out their solutions but it does not work for my t430s i tried changing the pmev thing to what was posted in the thread. Can anyone help me? Thanks!

I already tried that as mentioned in my original post, it doesn't work. I still get the pop up message: this is me pressing fn + f5

How can I keep the download window plus a status bar in the bottom side of my navigator?

I downloaded firefox 4 today and the first thing I noticed is that my status bar for downloads at the bottom side of my navigator it's gone! so I downloaded a plugin called "statusbar" and I don't like it at all... it is nothing like my old status bar and it takes away my big download window (the one that you can see even if you minimize the navigator); how can I make it back??
I like to have both things (the big window and the status bar) and I can't make it back using the options of the plugin.
Besides that, if I have the new statusbar it doesn't advice me when the download ends (that note that pops up when it's over saying "download finished" really useful when you're watching a video on fullscreen) and I can't change that either from the plugin options!
I know that not every plugin are made by firefox so if you can't help me please let me know anyway so I can go back to the latest firefox version to have my big downoloads window plus the statusbar at the bottom and the note all at a time!
THANK YOU!!
=)

Hi piepkorg-
Does your Add-ons manager show the weather toolbar as being installed? I would recommend starting with this article- particularly the sections on managing Add-ons and troubleshooting:
[[Using plugins with Firefox]]
Hope that helps!

Fingerprint reader on DV6t no longer works on windows logon

For some reason the fingerprint reader on my Pavilion Dv6t, LM720AV, does not work on windows logon anymore
I get the usual lock screen where I have to enter my password. The fingerprint option no longer appears
I have tried rebooting, powering off, reinstalling the validity sensor package sp55109 and it still does not work
Any help would be greatly appreciated
Thanks

Export the Webcard Database:
If you have working SimplePass software, Export your Webcards before proceeding. In the event that you must later remove the SimplePass software, your webcard backup can be used (imported) to restore your website login information.
Start SimplePass > Settings > Export NOTE: File will be named *.tsd
Then:
Try / Consider:
===================================================================
The Hard Reset:
This method works for a variety of Driver connection and ‘stuck’ program issues.
Shut down the computer
Disconnect all external devices - everything.
Remove (disconnect / unplug) the AC power
If the notebook contains a removable Battery, remove it
Press and hold power button for at least 30 seconds
Reinstall the AC power cord for first startup ** See Note
Power on - Log in
Next time you shut down the system, reinstall the battery.
** Note: If time is short, reinstall battery the first time and be done with it.
Reference:
Hard Reset to Resolve Hardware and Software Issues
===================================================================
If that does not resolve the issue, then try this:
Repair the SImplePass Software:
Control Panel > Programs and Features >
Look for this program:
Right-Click on HP SimplePass
Select "Repair"
Restart / Reboot your computer and log in...
====================================================================
Kind Regards,
Dragon-Fur

Acrobat 9 Reader with Windows 2008 Terminal Server

I am setting up a Windows 2008 Terminal Server and i need to have the Adobe Acrobat Reader installed. I downloaded and installed the Vista version and it worked from the console but when i try to access it via a terminal server session the application just crashes. If i try and run it as administrator in the same terminal server session it launches fine.
Any suggestions????
Jason
p.s The associated event log error is:
Log Name:      Application
Source:        Application Error
Date:          7/31/2008 1:17:57 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Comet.invera.com
Description:
Faulting application AcroRd32.exe, version 9.0.0.332, time stamp 0x4850f0a3, faulting module Annots.api, version 9.0.0.332, time stamp 0x4850e57f, exception code 0xc0000005, fault offset 0x001bd9e0, process id 0x1458, application start time 0x01c8f3316002e3b7.
Event Xml:
    1000
    2
    100
    0x80000000000000
    3663
    Application
    Comet.invera.com
    AcroRd32.exe
    9.0.0.332
    4850f0a3
    Annots.api
    9.0.0.332
    4850e57f
    c0000005
    001bd9e0
    1458
    01c8f3316002e3b7

Jason...
Make Certain that you Had the Server In "TS-Install" Mode When you Installed Acrobat. It Is In your Control Panel. I Have Pasted the MS Help File Below.
Install Programs on a Terminal Server
You should install the Terminal Server role service on the computer before you install any programs that you want to make available to users. If you install the Terminal Server role service on a computer that already has programs installed, some of the existing programs may not work correctly in a multiple user environment. Uninstalling and then reinstalling the affected programs may resolve these issues.
To ensure that an application is installed correctly to work in a multiple user environment, you must put the terminal server into a special installation mode before you install the application on the terminal server. This special installation mode ensures that the correct registry entries and .ini files that are needed to support running the application in a multiple user environment are created during the installation process.
You can put a terminal server into this special installation mode by using either of the following:
Install Application on Terminal Server tool under Programs in Control Panel. This tool will run a wizard to help install the application.
Change user /install command at a command prompt. You will have to start the installation of the application manually.
After the application is installed, you must put the terminal server into execution mode before remote users begin using the application. The Install Application on Terminal Server tool will automatically put the terminal server into execution mode when it is finished running. To put the terminal server into execution mode from a command prompt, use the change user /execute command.
Additional considerations
Some programs may require minor setup modifications to run correctly on a terminal server.
If you have programs that are related to each other or have dependencies on each other, you should install the programs on the same terminal server. For example, you should install Microsoft Office as a suite on the same terminal server instead of installing individual Office programs on separate terminal servers.
You should consider installing individual programs on separate terminal servers in the following circumstances:
The program has compatibility issues that may affect other programs.
A single program and the number of associated users may fill server capacity.
For more information about the change user command-line tool, see the Terminal Services Command Reference (http://go.microsoft.com/fwlink/?LinkId=89674).
For more information about deploying programs on a terminal server, see the Terminal Server page on the Windows Server 2008 TechCenter (http://go.microsoft.com/fwlink/?LinkId=79608).

How to capture the Windows logon user

Hi. How I can to capture the Windows logon user for the browser.
I have a procedure on webtoolkit, and when I call the proc I pass the user of application, I need check if the net user is the same.
Thanks

if you have to take the user name of the server machine it is just
System.getProperty("user.name");if you want to retrive the username from the client machine
then look at this thread
http://forum.java.sun.com/thread.jspa?threadID=766416&messageID=4370490#4370490

Not getting windows logon screen

HP 4530s Win 7 64 bit
Still dealing with the keyboard problems. After changing 3 keyboards, with 3 Case#'s, was told problem is probably in the software and before they would proceed I needed to return the system to the defaults (system restore from F11), disregarding my system image and if keyboard problem persists, then they will do something. I knew this was going to be a gigantic headache requiring many hours to get everthing back. Used Windows Easy Transfer to save user stuff and restore it after. Was right about many hours. After about 6 hours I have most of my stuff back, but will need several more hours to get things into correct folders etc. At present, my biggest problem is that instead of getting the Windows logon I get a HP logon that is similar in function to being in Safe Mode. It is a white screen and the cursor is large and moves jerkily. There are 2 circles in the center that appear to have a finger print in one, not sure of the other. In the upper left is a button for PASSWORD and above that Audible Alerts Disabled, F5 to Enable. Above that is the computer name. How do I get rid of this and get the Windows Logon instead?

Hi Glamorgranny,
First, you may want the sidebar displayed so we can easily see connected devices:
Show Sidebar - Choose View > Show Sidebar (this feature will display iTunes features on the left side of the application including Library, Store, Shared, Genius, and Playlists).
Note: if you do not see the "View" option, turn on the menus by pressing Control-B.
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
After clicking on the device on the left hand side, you should see the Summary page. You can then navigate to the different tabs:
For more information, see this resource:
iOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
If your device is not displayed in the sidebar when connected, see this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M.

Add Windows 2008 Terminal Server to RWW/RWA

I would like to add our Windows 2008 Terminal Server (not R2) to RWW in Windows 2012R2 Essentials. The connect computer wizard did not work on the Windows 2008 server, returning Win32 error.
How do I add the 2008 TS to the devices listing in RWW without using the connector wizard (as it does not work). The Windows 2008 server has been join to the same domain manually.

You cant add it as a tile device in the way you could in SBS 2011 Standard.
You can create an RDP file, and save that so it is accessible via the RWA then add a link to the RWA to that file.
You may need to tweak IIS to allow .rdp files.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Windows 2003 Terminal Server, ZEN 7, and WSUS

Hi,
We're having a problem getting a group policy to "Stick" in Windows 2003
terminal server. The server(s) have the ZEN 7.01 agent installed per
the TID's for a terminal server. We believe we've set all the Group
Policies of the users that login to these systems, yet once they are
rebooted, the WSUS update server location resets to the default
(update.microsoft.com). This is set in gpedit in:
\computer configuration\administrative templates\Windows
Components\Windows Update
Is this settable in a user package, or should this be done in a
workstation package? If so, could we "force" the workstation package to
override the Windows Update settings for all users, regardless of what
user policy package they have?
Thanks for any ideas!
Greg

In the Properties of the WS Group Policy, there is an option to set "Loop
Back" so that the Computer GPO is set last.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"Greg Palumbo" <[email protected]> wrote in message
news:rFFZk.5166$[email protected]..
> Hi,
>
> We're having a problem getting a group policy to "Stick" in Windows 2003
> terminal server. The server(s) have the ZEN 7.01 agent installed per the
> TID's for a terminal server. We believe we've set all the Group Policies
> of the users that login to these systems, yet once they are rebooted, the
> WSUS update server location resets to the default (update.microsoft.com).
> This is set in gpedit in:
>
> \computer configuration\administrative templates\Windows
> Components\Windows Update
>
> Is this settable in a user package, or should this be done in a
> workstation package? If so, could we "force" the workstation package to
> override the Windows Update settings for all users, regardless of what
> user policy package they have?
>
> Thanks for any ideas!
> Greg

Windows 2008 Terminal Server, Acrobat 7, 9

Hello,
I have Acrobat 7 installed on a Windows 2008 terminal server. Anyone with a terminal session that has Acrobat 7 installed on the local workstation is able to create Acrobat documents. Why is it that anyone with a terminal session that has Acrobat 9 installed on the workstation is not able to create Acrobat documents?
Thank you,
techctzn808

I replied to your other message
http://forums.adobe.com/thread/536492?tstart=0

I dream of running Dreamweaver on a Windows 2003 Terminal Server

I have a "volume" license and attempted to install Dreamweaver CS4 on a Windows 2003 Terminal Server. I get an error message right away indicating that the system does not meet the minimum install requirements, ie XP/Vista.
Adobe volume licensing team verified that it is the correct license for installing on a terminal server, but after one hour of what would a bad nightmare with adobe "no" support (Outsourcing issue, failure to grasp and process the basic error message) I got no where and am having to resort to the forums. I have googled on this and got no where and nothing on the search efforts on this site.
If anyone has an idea of what is going on, bug, wrong install media, please clue me in.
Thanks!

pziecina
Thanks for the information. We do have AppV here and tried that approach. While this gets us past the install minimum requirements, it does not resolve the issue of running of more than one instance at a time, per terminal server, even though our volume license allows for it.

Need help with two-factor auth for windows logon using CSS

Hi all,
I have been trying for a couple of days now to get two-factor auth for windows logon working on my X1C Type 3443.
I am running Windows 7 (64-bit) with Lenovo System Update 5.06.0007, Lenovo Solution Center 2.6.001.00, ThinkVantage Fingerprint Software 5.9.9.7282, ThinkVantage Client Security Solution 8.30.0031.00. If it's of any importance, my X1C was originally shipped with Windows 8, but I couldn't stand it and reinstalled Windows 7 instead.
I have uninstalled and reinstalled the above programs in the following order:
1) Install System Update and reboot
2) Install Solution Center and reboot
3) Install CSS and reboot
4) Install Fingerprint Software and reboot
Everything seems to be working fine by itself, except that when I try to configure two-factor auth in CSS, the Fingerprint tab (on the left of the GUI) is greyed out and CSS tells me that I have no fingerprints enrolled. The Fingerprint Software, however, is working just fine and shows me as having a fingerprint enrolled there.
I have spent all morning searching for a solution, but everything I find dates back to 2011, when ThinkPads still came with ThinkVantage Toolbox. I obviously can't download that anymore, so I'm at a loss. Can someone please help? Thanks!
Candace

Hi all,
I have been trying for a couple of days now to get two-factor auth for windows logon working on my X1C Type 3443.
I am running Windows 7 (64-bit) with Lenovo System Update 5.06.0007, Lenovo Solution Center 2.6.001.00, ThinkVantage Fingerprint Software 5.9.9.7282, ThinkVantage Client Security Solution 8.30.0031.00. If it's of any importance, my X1C was originally shipped with Windows 8, but I couldn't stand it and reinstalled Windows 7 instead.
I have uninstalled and reinstalled the above programs in the following order:
1) Install System Update and reboot
2) Install Solution Center and reboot
3) Install CSS and reboot
4) Install Fingerprint Software and reboot
Everything seems to be working fine by itself, except that when I try to configure two-factor auth in CSS, the Fingerprint tab (on the left of the GUI) is greyed out and CSS tells me that I have no fingerprints enrolled. The Fingerprint Software, however, is working just fine and shows me as having a fingerprint enrolled there.
I have spent all morning searching for a solution, but everything I find dates back to 2011, when ThinkPads still came with ThinkVantage Toolbox. I obviously can't download that anymore, so I'm at a loss. Can someone please help? Thanks!
Candace

Window logon termination status 0xc0000135

Similar Messages

Maybe you are looking for