Window oracle job scheduler and Oracle server scheduler relationship

Hi Experts,
We use oracle 10G R4 in window 2003 server.
From window server panel,we can see OracleJobSchedulerORCAID server is disable. However, I check oracle Jobs from EM.
I can saw schedule jobs are running in there.
What relationship is between window scheduler server and Oracle Schdeler?
As I know we can stop/start window Oracle database serve,r DBconsle EM server and Listener server in window server to control oracle
.Why window oracle schedule does not affect Oracle schdule job?
Thanks Experts to explaining?
JIm

10g R4 is not an existing Oracle version. 10.2.0.4 is.
Oracle EM has three different schedulers:
- dbms_job
- dbms_scheduler
- EM's own scheduler. Jobs submitted in the EM scheduler are spawned by the Management Agent.
Sybrand Bakker
Senior Oracle DBA

Similar Messages

BI Schedule and Presenation Server on Different Servers Configuration

I'm having a problem getting my iBots to run and deliver the information to the catalog with the following configuration:
2 Presentation Servers on Windows with IIS for NTLM authentication (via a Load Balancer)
OBIEE Server and Scheduler, and Presenation Server on Solaris (the Presentation Server on Solaris will be turned off)
The catalog between the 2 Windows Servers are are shared. When I create an iBot on the Windows the request is sent to the Scheduler on Solaris and errors out with the following message:
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Path not found (
/shared/_ibots/Test Email from UAT)^M
Error Codes: U9KP7Q94^M
My question is why does the scheduler send the alert to the Presentation Server on the Solaris box and not the shared Presentation Server with the shared catalog on the Windows Servers. Am I missing something in the configuration?
Thanks,
Chuck

I figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.

Oracle service, Listener and http server does not start automatically

Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.

Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar.

Run Oracle Web Logic and Oracle Application Server 10g on same server

Since oracle has chosen to release adf faces 11g, before the SOA suite 11g is released, we are facing the challenge to run both Oracle Web logic and Oracle Application Server 10g on the same server.
If anyone have any experience in this setup or has knowledge of other feasable setups please let me know.
Regards.
Jan

What version of Oracle Application Server 10g are you installing?
If you are installing 10gR2 (v10.1.2.x) have you taken a look at point #70 in "Table 2 Additional Information for Certified Platforms" section here?
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html
Thanks
Shail

Documentation for oracle webcenter wiki and blog server 10.1.3.2.0

Hi
Can anyone tell me where I can get the documentation for oracle webcenter wiki and blog server 10.1.3.2.0. I am specifically interested in this version and not the latest version Oracle® WebCenter Wiki and Blog Server 10g Release 3 (10.1.3.4.0) because I have heard the older version provided out of the box portlets for creation of blogs.
Since we want blogs very fast, I want documentation of this older version.
Can anyone point them out to me as soon as possible please

You can find the demo portlets here: http://www.oracle.com/technology/products/webcenter/owcs_10132_demos.html#wiki_blog_disc_samples
I do not believe there were any portlets provided with the earlier release.
Anyway what i think is it should not take you more than a few hours to integrate blogging functionality if you are using the Connection & Task flows provided by WebCenter.
Venkat

OLM oracle learing management and content server

I want know about OLM oracle learing management and content server.
how to install content server on a different server ( which set up i need to take and how to install it. ).
Also how to integrate this content server with Oracle EBS?
-Sagar

Hi;
Please check:
Note.297108.1 - Oracle iLearning 5.0 Installation Guide
Note.361958.1 - Oracle iLearning 5.0B Upgrade Considerations
Note.364670.1 - Oracle iLearning 5.0B Upgrade Guide
Regard
Helios

Oracle 11G database and Application Server installed on same server

What are the pros and cons installing Oracle 11G database and Oracle Application Server (Forms and Reports) on the same server?
Thank you in advance, Sonya

Some may want their data in a separate network zone for security reasons.
It also depends if it is the same people that do maintenance on db and appserver.
It is lower cost with one server, and only 1 Os to set up.

Protocol betwwen Oracle VM Manage and host server

Hello,
What is the communication protocol and/or security protocol used between Oracle VM Manager and host server ????
thanks

From what I understand, the Oracle VM agent, installed with the Oracle VM server, communicates with Oracle VM Manager to manage virtual machines.
The communication between Oracle VM manager and server is XML-RPC with SSL encryption i.e. You can take a look at https://<vm_server>:8899
http://download.oracle.com/docs/cd/E11081_01/doc/doc.21/e10898/config.htm
contains information about ports, etc.
Is this a theoretical question or are you asking to sort out some networking trouble?

Oracle Database 10g and Oracle Client 9i together

Hi, I've been lost some nights in this problem, in my job I will need migrate my Oracle Database 10g for a new computer, on the other hand, there is a software in this computer wrote in Visual Basic and this running only Oracle 9i Client.
Is it possible configure my new server for run Oracle Database 10g and Oracle 9i Client together?
Thanks!
Emerson

You can certainly use an Oracle 9i client to connect to an Oracle 10g database. Technically, you may have to apply the 9.2.0.4 patchset to the Oracle client to be completely supported, but that may not be strictly necessary.
You can also have both a 10g database and a 9i client installed on the same machine in different Oracle Homes. You may have some issues on Windows, however, if you are using software that is not multi-home compliant (i.e. the Microsoft ODBC driver for Oracle) or if you call Oracle command-line utilities (exp, imp, etc) without explicitly setting the PATH first.
Justin

About Oracle Heterogeneous Services and Oracle Gateway

Hi All,
I am very new at this topic, I want to know:
1)Oracle Heterogeneous Services and Oracle Gateway same or not?Need license or not?
2)If want Creating Database Link from Oracle 11g to Sybase AS 15.5 Using Oracle Heterogeneous Services what drivers should I install from my pc(windows 7) and from my server(Linux red hat 5)?please give me link for this
3)Is there any link Step by step to configure odbc until creating dblink?
4)what more convenient, connect sybase from Oracle Heterogeneous Services or Oracle Gateway?
Thank you so much for your help
Regards
JOE

Joe,
let copy/paste your questions and comment inline:
1)Oracle Heterogeneous Services and Oracle Gateway same or not?Need license or not?
Let me first clarify one thing, heterogeneous services is the generic mechanism in the Oracle database used by all gateways. The product you are talking about is the Database Gateway for ODBC or the Database Gateway for Sybase.
The Database Gateway for ODBC is available for Linux and Windows. It is the free product which does not require an Oracle license. The license is included in your database license. It is a generic gateway which allows you to connect with any suitable 3rd party ODBC driver to a matching foreign database. As it is a generic connectivity which aloows you to connect to real databases but also to MS Excel or even Text files as long as you have a suitable ODBC driver, its capability is very limited.
The more powerful gateway is the Database Gateway for Sybase. It covers the same functionality as DG4ODBC but it allows you also to work with distributed transactions, it allows you to call remote Sybase stored procedures etc. This gateway is design for Sybase ASE connections, so it is also able to map certain Oracle functions to Sybase equivalents. This Database Gateway for Sybase is NOT for free, it requires an additional license.
2)If want Creating Database Link from Oracle 11g to Sybase AS 15.5 Using Oracle Heterogeneous Services what drivers should I install from my pc(windows 7) and from my server(Linux red hat 5)?please give me link for this
That depends on your preferences. Both gateways are available for Linux and for Windows. When using DG4ODBC you only need to pay attention that you get a suitable 3rd party ODBC driver for this platform with the matching word size (64bit for 64bit DG4ODBC and 32bit ODBC driver for installations of DG4ODBC on 32bit platforms).
The latest software release is currently 11.2.0.3 and it can be downloaded (and installed from scratch) from "My Oracle Support". Just open the Patches & Updates section, look for Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER and make sure to choose the platform you want to use. Then check out the readme as it lists which of these download CD's contains the gateway software.
BTW, the CD contains DG4ODBC and DG4SYBS and it is up to you to decide during the installation which product you want to use.
3)Is there any link Step by step to configure odbc until creating dblink?
The ODBC driver installation differs from vendor to vendor and platform to platform - so we don't have a specific note how to configure the ODBC driver. This kind of question is better handled by the ODBC driver vendor.
Regarding the set up of DG4ODBC on Windows you find suitable information in the knowledge base on My Oracle Support. Just look for:
How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit to Connect to Non-Oracle Databases Post Install          [Document 466225.1]
and for DG4SYBS:
How to Configure DG4SYBS (Oracle Database Gateway for Sybase) on 64bit Unix (Linux, AIX, HP-UX Itanium and Solaris) Post Install          [Document 437696.1]
How to Setup DG4SYBS (Database Gateway for Sybase) on a 64bit Windows          [Document 1319852.1]
4)what more convenient, connect sybase from Oracle Heterogeneous Services or Oracle Gateway?
It really depends on your needs. DG4SYBS is surly easier to install as this gateway comes with everything you need and you do not have to find a suitable ODBC driver nor get the ODBC driver working. It is also more powerful as you can for example use triggers that replicate data changes in an Oracle database to the Sybase database within the same transaction. When you want to call Sybase stored procedures you can also do that with DG4SYBS. So it really depends on your needs.
- Klaus

Diff Between Oracle BPM Studio and Oracle BPEL Process Manager

1)What is the difference between Oracle BPM Studio and Oracle BPEL Process Manager?
2)What is the connection between Oracle BPM Studio and Oracle BPEL Process Manager?

Hi,
As of today you should install SOA Suite 11g
Fr this you will need to install Database (for development you can use XE)
Run RCU utility to crete DB schemas for SOA Suite.
Install Weblogic server
Install SOA Suite as an option to Weblogic
Create SOA Domain.
It is physically possible to do it in 2GB but is far better on 3 - 4GB
You can consider installing DB on different machine.
Adam

Oracle portal 9 and oracle webcenter and SSO

dear team.
we have oracle portal 9 and oracle webcetner in my orgnization. both have different usernames/passwords. is there a way to have only one single username/password (webcenter ones) how can i do that. or even can we implement SSO thrugh windows login.
is there a way to intergrate both in a way to have only one username/password for both.
any hint will help as this topic new to me.
fadi

They are separate products.
Oracle Weblogic Portal and Oracle Portal 11g

Error oracle.sql.* and oracle.jdbc.driver.* not found when using oracle as a database

I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
Please Advice!
Thanks in advance
AnuPama

Hi Anupama,
First of all I would be surprised if you would not like to use the connection pooling feature of weblogic (in which case you might not be needing the import the classes directly), and would like to open direct connections to your database. Anyways for doing that I would recommend you to check out the readme doc that ships
along with the jdbc oracle (classes12.zip etc). I am giving an excerpt over here:
These are a few simple things that you should do in your JDBC program:
1. Import the necessary JDBC classes in your programs that use JDBC.
For example:
import java.sql.*;
import java.math.*;
2. Register the Oracle driver before before calling other JDBC APIs.
(This is not needed if you are using the JDBC Server-side Internal
Driver because registration is done automatically in the server.)
To register the Oracle driver, make sure the following statement
is executed at least once in your Java session:
DriverManager.registerDriver(
new oracle.jdbc.driver.OracleDriver());
3. Open a connection to the database with the getConnection call.
Different connection URLs should be used for different JDBC
drivers. The following examples demonstrate the different URLs.
For the JDBC OCI8 Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:oci8:@<database>",
"scott", "tiger");
where <database> is either an entry in tnsnames.ora or a SQL*net
name-value pair.
For the JDBC Thin Driver, or Server-side Thin Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:thin:@<database>",
"scott", "tiger");
where <database> is either a string of the form
<host>:<port>:<sid> or a SQL*net name-value pair.
For the JDBC Server-side Internal Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:kprb:");
Note that the trailing ':' character is necessary. When you use
the Server-side Internal Driver, you always connect to the
database you are executing in. You can also do this:
Connection conn
= new oracle.jdbc.driver.OracleDriver().defaultConnection();
Hope this helps,
Thanks,
Anupama wrote:
I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
Please Advice!
Thanks in advance
AnuPama--
Apurb Kumar

Oracle AS Infrastructure and Oracle AS

We have installed Oracle AS Infrastructure and Oracle AS successfully, the problem is that we can not connect to both of them by using web based console.

Hello Anwer,
You can find this information in chapter '7 Installing Middle Tiers' in the installation guide for your platform : http://download.oracle.com/docs/cd/B14099_19/getstart.htm
And you can install both the infra and midtier on the same server provided there is enough physical RAM available.
Thanks,
EJ

Difference Between Oracle Database 10g And Oracle 10g Express Edition

Can any body Tell me What is The Difference Between Oracle Database 10g And Oracle 10g Express Edition.

http://www.oracle.com/database/product_editions.html
This link might help you.

Date Formats in Oracle Applications Forms and Oracle Self Service

Can someone tell me what determines the Date format that appears on Oracle Applications Forms and Oracle Self Service ?
*1.* In Oracle HRMS,all dates i see on the Forms are of the Format "MM/DD/YYYY" but my NLS Parameters are not in this format .I'm giving the results for the NLS parameters below.I thought the date formats are determined by the NLS format.Is there something else that determines the date format appearing on Oracle Applications Forms ?
NLS_DATABASE_PARAMETERS
NLS_DATE_FORMAT     :DD-MON-RR
NLS_DATE_LANGUAGE     :AMERICAN
NLS_LANGUAGE     :AMERICAN
NLS_TERRITORY     :AMERICA
NLS_INSTANCE_PARAMETERS
NLS_DATE_FORMAT     :DD-MON-RR
NLS_DATE_LANGUAGE     :
NLS_LANGUAGE     :american
NLS_TERRITORY     :america
NLS_SESSION_PARAMETERS
NLS_DATE_FORMAT     :DD-MON-RR
NLS_DATE_LANGUAGE     :
NLS_LANGUAGE     :american
NLS_TERRITORY     :america
*2* What about the profile option : ICX_DATE_FORMAT_MASK ? Does it determine the Date Format for Self Service alone or does it impact the date format appearing on Oracle Applications Forms and the actual database also ?
*3* If I use a to_date function in ,say, a pl/sql function that i code for some custom requirements,what will be the output of the date format ? Does it take the format given in NLS paramaters or is it determined by anything else?
Thanks in advance...

Hi,
Thanks for your reply ,but I'm still confused ..
Here are the profile options I'm seeing for one of my instance :
ICX: Date format mask - 12/31/1999
ICX: Date language - American English
ICX: Language - American English
ICX: NLS Sort - BINARY
ICX: Territory - United States
ICX: Numeric characters - NULL
NLS parameters are given in my original email.
In Self Service applications(OAF) ,the date format is appearing in "mm/dd/yyyy" format but when i login to Forms based applications ,I see the date format as "dd-mon-yyyy".What determines this date format ?
How can i make the date format to always return one format everywhere ,be it Self Service (OAF) or Oracle Forms ?
I'm getting date format related errors for my code because of default date formats changing intermittently when i log into Self Service.I want to know if there is anyway to prevent this from happening?
Thanks in advance.

Window oracle job scheduler and Oracle server scheduler relationship

Similar Messages

Maybe you are looking for