Window Properties (HTML Help) - Placement Issues

I am compiling my online help in Robohelp 8 and have an issue with the window placement of the Help menu output.  I have a dual monitor setup so the Help window appears on the primary monitor.  Is there a setting or configuration that instructs the Help menu to open up as a child to the parent application that's calling the Help?

Janet:
Make sure there are no carriage returns lurking inside the
JavaScript (depending on how the content was wrapped when you
selected it to Copy/Paste). One way to be sure is to copy it to
Notepad and turn off the Wrap feature; any line breaks will be
obvious.
Good luck,
Leon

Similar Messages

  • Unable to change window properties after upgrading project from X5 to RH8

    Hi,
    I just upgraded an existing project from X5 to RH8.  In Windows Properties (HTML Help), if I make any changes and click OK, I receive the following message:
    "For Width field please enter a value between 65 and 24."
    If I do enter a value within those parameters in any of the "Width" options on the Properties page, I'm still presented with the same error message. 
    How can this be corrected?
    Thanks!

    Hi there
    Perhaps try creating a totally new window definition and configuring the parameters as desired.
    Once in a blue moon we see that the window definition somehow becomes corrupt.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • HTML Help window placement problem

    Hi -
    We just upgraded to R7 from X5. It seems that now, for our
    newly generated Help, the HTML Help viewer will not right-align.
    Even if I specify the maximum width in the Window Properties
    dialog, when generated, the window only extends about 4/5 of the
    available screen width and is LEFT aligned.
    Our screens are 1024 x 768 and RoboHelp seems to understand
    this because if I max out the window size in the Window Properties
    dialog, the height shown = 767 and width = 1019.
    Is anyone else experiencing this placement problem?
    TIA

    Hi, Jack,
    > ... the HTML Help window properties dialog only accepts
    hard coordinates (i.e. pixels).
    > ...
    > Unless someone knows differently, for HTML Help,
    apparently you can't get the HTML
    > Help viewer to appear right-aligned for all
    screen/display configurations
    Yes, this is correct on both counts. Because of limitations
    in Microsoft's design of HTML Help, you cannot specify the
    dimensions of the help window in anything other than pixels, and
    you can only set the initial position of the window relative to the
    left and top edges of the screen.
    On the other hand, if you are calling the help file
    programmatically from an application, there may be some scope for
    controlling the position of the help window by using standard
    Windows functions. This article provides a small amount of extra
    information:
    http://helpware.net/FAR/far_faq.htm#control
    Pete

  • Main window size for HTML Help

    Hello again
    I have looked at the archives and despite thinking I had seen
    this particular issue covered before, I could not find anything. I
    generate a HTML Help File with RoboHelp for Word x5.0.1 and would
    like to set the default window size as at the moment my Help File
    opens in a rather small window. Also if a user maximises the
    window, closes the Help File and re-opens it, it still opens in the
    small windows, i.e. the size settings were not save upon closing
    the file.
    Can anybody help? I reckon there must be some place (I
    noticed the existence of the Edit > Windows menu but it only
    seems to apply to WinHelp) I can set this up.
    Thank you.
    Regards,

    In Project Manager, double click Windows and then the window
    you use. There should be fields for setting the size. If not, check
    that HTML is your primary output and then create a new window, then
    you should see the fields.

  • Cannot Compile CHM -- Message says to close all HTML Help windows

    Running TCS 1.3 with latest patches.
    Single source project - output to HTML Help (.chm).
    When I try to compile, I receive the following message:
    "Cannot create compiled file. It may be open in another window. Please close all HTML Help windows and try again."
    I don't have any HTML Help windows open. Shutting down RH and restarting does not resolve the problem. I have to shut down the computer, which is a serious hassle, before I can compile again. I do work from a network directory, which may be causing it, but I'd like to know if there is a process I can kill from the Windows Task Manager that would allow me to compile without having to restart my computer. I don't see any process that identifies itself as something I can kill to resolve this issue.
    Anyone?

    Hi there
    That message normally indicates you have launched the .CHM file that you are trying to create. The first step of the process is to destroy the existing .CHM in preparation for building the new one. Just as you would need to destroy a house on a lot where you wish to build a new one.
    If your .CHM is on a network drive, another user may have it open. (yet another good reason for working locally)
    If your .CHM is on your local drive, RoboHelp believes you have it open. If you press Alt+Tab, you may see a blue up arrow. That will indicate the running CHM file.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Issues with RoboHelp HTML Help and IE7

    I attempted to create a basic (one-topic) HTML Help file
    using RoboHelp X5 (5.0.2 update), with the topic tied to the TOC,
    index, and search navigation tools. I attempted to open the CHM on
    a PC running Windows XP / IE7, but it displayed the "page cannot be
    displayed" error.
    I tried to open the CHM file on another PC running Windows
    2000 / IE6, and it worked like a charm.
    Apparently, there is something about IE7 (or Windows XP, but
    I doubt it) that breaks RoboHelp HTML Help files. Does anyone have
    any information about this issue? Thanks!
    - Greg

    Welcome to the forum.
    The problem contrary to your belief originated under Windows
    XP.
    Click
    here for an explanation and the options.

  • No Windows HTML Help shown under Win7?!

    Hello there,
    I work with RoboHelp 8 and Win7. I´ve tried to generate html help, the CHM is shown but there´s no window popping up and showing the result. How can that be? Is there a serious compatibility problem with windows7 and robo8?
    thx so far

    Hi there
    You were compiling a CHM file, no?
    Sorry, but my guess is that there is little RoboHelp or Adobe could do to influence that behavior, because what it does is to hand things off to the Microsoft HTML Help Compiler.
    As an aside, it's been known for a while that long path names may cause issues. Best practice is to create a folder near the root. I frequently recommend one named Projects. As in C:\Projects. Then for each project you create, it becomes a sub folder inside that.
    In addition to what I listed above, when you name things (Projects, Files, Folders) you should avoid any special characters. Stick to the basics. a-z, A-Z and 0-9.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • My ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working. i have a a windows PC please help thanks

    my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
    ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanks

    Are you attempting to sync music from your iTunes Music Library on your PC?
    What options do you have set on the Music Tab for your iPad in iTunes?
    What happens when you sync?
    Any error messages?

  • Urgent - HTML help merged projects - displaying in the same window

    Hi All,
    Following some recent windows updates I'm experiencing all sorts of problems. My most urgent problems is as follows:
    First off this is all in RH8 and yes I have upgraded to 8.0.2 and project is set to re-build cpd each time.
    So I have a merges project as follows:
    Parent project
         child project 1
         chils project 2 etc
    when I compile an html help project with TOC, and single source window settings on default if I click on a child project it is diaplyued in a separate window. If I then select a different project in the parent project TOC this is also displayed in a different window but the window still has the caption of the previously opened file.
    What I need as  the end result is for my HTML help project output to al display in the same window whether I click on a parent project item, or a child project item.
    Please can somebody advise mne how to do this as I am VERY close to a deadline and as usual it seems RH8 has let me down again.....
    Thanks
    Author Care

    Hi there
    Methinks Colum needs more coffee, because the options he cited have nothing to do with other windows. They have to do with whether the displayed topic synchronizes with the TOC and whether the TOC entry is highlighted.
    I'm thinking it has to do with creating a "Global" window. You change the names of the windows so they include Global.
    The link below has more:
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Customize window size  for HTML Help?

    My .CHM file opens up in a ridiculously tiny window, and I
    can't seem to change that from within Robohelp. I saw some
    information on Rick Steve's site about customizing window sizes for
    Webhelp and Flashhelp. I'm hoping there's a similar technique
    available for HTML help.
    Thanks!

    In Project Manager, double click Windows and then the window
    you use. There should be fields for setting the size. If not, check
    that HTML is your primary output and then create a new window, then
    you should see the fields.

  • Calling Windows HTML Help

    Hello
    can any one tell me how to call Windows HTML Help (.chm)?
    It is possible to call .hlp file using -
    v_help:=Winhelp.Winhelp('C:\HELP_SAMPLE.HLP',
    'HELP_CONTENTS','ORA_FFI');
    But same package fails to invoke HTML Help (.chm file) , is there any other pachage available to call HTML Help ?
    thanks for any replay
    Prakash K.B.

    Hi Prakash,
    you must install the MS HtmlHelp (hh*.* - files) on the clients and then you can call the CHM-Files from Forms-client:
    host('C:\WINNT\system32\hh.exe C:\help.chm');
    It works fine.
    Regards
    Friedhold Matz

  • Resource Conflict – Serial Bus Controller & PCI Bus Issues - Cannot Load Windows 7 - PLEASE HELP!

    Anyone have any ideas about a remedy?  I am ready to toss it and purchase another.   THANKS! HP Pavilion Notebook,  dv9827clAMD Turion 64 x 2, Bios F.34Windows 7, SP 1  (Upgraded from OEM Vista SP2) PROBLEM:   This morning my system has a blank illuminated screen.  Upon power-on, the system eventually goes to the blank screen.  Can get to BIOS functions, but beyond that it will not load Windows 7.  System was working with Windows 7 prior to this issue.  No recent changes or updates made to this system.   Stationary - No physical abuse.  Five (5) years old.   Upon power-on, the screen gives PF keys, which enable me to enter the BIOS:          F1 – System Information > Clock still has correct date and time.          F2 – Startup Check  -> Both HD and RAM OK          F9 – Change Boot Device Order -> Can change device order, but it still won’t boot or respond to a System Recovery DVD in a USB DVD.  ( Notebook DVD stopped working before this problem happened.)          F10 -  Enter Setup          F11 – System Recovery – Two choices, but <enter> and arrow keys do not work.  (They DO work with other F-selections, but not with F-11 menu)                    (1) Continue with System Resume                     (2) Delete Restoration Data and Proceed to System Boot OTHER OBSERVATION:  When access PF1, I get the BIOS.  If I exit and save with PF10, I get a brief flash of error messages, then it goes back to the PF-selections and eventually to the blank screen.  Here are the error messages:Bios Version F.34ERRORResource Conflict – Serial Bus Controller on MotherboardBus 02  Device 05  Function 00ERRORResource Conflict – PCI on MotherboardBus 02  Device 05  Function 01ERRORResource Conflict – PCI on MotherboardBus 02  Device 05  Function 02ERRORResource Conflict – PCI on MotherboardBus 02  Device 05  Function 03ERRORResource Conflict – PCI on MotherboardBus 02  Device 05  Function 04 OTHER ACTION:  Tried a hard reset = Removed battery, held down power key about a minute, but no effect.  The data part of the HD is ok.  I can remove the hard drive and put it in an enclosure, then access the data with another computer.

    Hi!
    I have exactly the same problem on my HP dv6750, but I can't find an answer that really help me to solve it.
    Well, this post shows the description of my problem, so, I don't want this question dies.
    If somebody have the solution, please, help me to bring my laptop back to life again.
    Thanks 

  • Complied chm file displays 'HTML help' on the title bar instead of the window name

    Complied chm file displays 'HTML help' on the title bar instead of the window name.
    I tried several ways like:
    1. Changed File>Project settings name and also set the language to English (US).
    2. Checked the Title name in .hhp file
    3. Used the window while compling.
    4. Robohelp language settings.
    5. Also uninstalled and reinstalled robophelp.
    But nothing helped
    The title name is displayed correctly if the same project is compiled on another machine.

    When the code in the HHP and the regional settings on a PC match, the correct title is displayed. Or other way around is also true the help title is displayed in the language specified in the help project IF (and only if) the regional settings of the PC match that language. Otherwise, "HTML Help" is displayed.
    Hope this help.
    Thanks and Regards,
    Rahul Karn

  • Want HTML Help Link to Open in New Window

    Using TCS V1.3 with the latest patches.
    Single source project from FM to RH -- output to HTML Help.
    I'd like certain links in the HTML Help to open into a separate window. Is there a way to set this up from FM? Apparently, WebWorks has a setting to accomplish this task - I don't see a similar setting in RH.

    Hi there
    I don't believe either of these is may be possible with a simple tweak you perform in the Frame source. Then again, the extent of my Frame knowledge is totally laid out with this:
    Everything I know about Frame.
    Click Start > Programs > Framemaker.
    The Framemaker application may open.
    Something happens after that, but I can't be certain.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Firefox browser won't open after Windows Troubleshooter 'fixed' FrontPage XP compatibility issue with windows 7? HELP!!

    The issue- Firefox browser won't launch.
    The history- Ran Windows troubleshooter to 'fix' compatibility issues running FrontPage (office xp proferssional version) on Windows 7. (Front Page opened then stopped responding partway through launch before 'fix'.)
    Now Front Page works (whoop-whoop!) but no Firefox :o(

    I removed opentext nfs solo v14 (hummingbird) it is just worked.

Maybe you are looking for