Window's application run on solaris

Dear
Sun Microsystems
I am Mandar sawant. I am animator. I am using 3d-animation software which required highly configuration computer. And want operating system which give me smooth performs for my 3d-animation software. I am using AutoDesk Maya for my software. So I have some question about this is follow.
1] Can I use my software on this operating system?
2] Is this operating system good for graphic and editing work?
3] What about security in this Os?
4] Is this virus and hacker proof?
5] can i run windows's application on this os? if yes then how?
please reply me soon.

1] Can I use my software on this operating system?Is your software Solaris based or written in Java? If not you will need an emulator to overlay onto Solaris for the OS your software is written for.
2] Is this operating system good for graphic and editing work?While I am not an animator, I have always been very pleased with the performance of Solaris in any task I need to run--yes, and some are animation.
3] What about security in this Os? Unix derivatives are much more secure than Windoz.
4] Is this virus and hacker proof?There is no such thing as virus or hacker proof... if you are connected to a network, then you can make deterants, but nothing is virus nor hacker proof.
5] can i run windows's application on this os? if yes then how? With a Windoz emulator you may as far as the emulator will allow.

Similar Messages

Application running in Solaris 9 container generating core files. what to do?

My solaris 9 zone configuration in solaris 10 looks like:
zonecfg:sms> info
zonename: sms
zonepath: /zone/sms
brand: solaris9
autoboot: true
bootargs:
pool:
limitpriv: default,proc_priocntl,proc_clock_highres,proc_lock_memory,sys_time,priv_proc_priocntl,priv_sys_time,net_rawaccess,sys_ipc_config,priv_proc_lock_memory
scheduling-class:
ip-type: exclusive
hostid:
[max-shm-memory: 4G]
[max-shm-ids: 100]
[max-sem-ids: 100]
fs:
dir: /var
special: /dev/dsk/c1t0d0s5
raw: /dev/rdsk/c1t0d0s5
type: ufs
options: []
net:
address not specified
physical: bge0
defrouter not specified
device
match: /dev/dsk/c1t0d0s5
device
match: /dev/rdsk/c1t0d0s5
device
match: /dev/dsk/c1t0d0s6
device
match: /dev/rdsk/c1t0d0s6
device
match: /dev/dsk/c1t0d0s7
device
match: /dev/rdsk/c1t0d0s7
capped-cpu:
[ncpus: 2.00]
capped-memory:
physical: 4G
[swap: 8G]
[locked: 2G]
attr:
name: hostid
type: string
value: 84b18f64
attr:
name: machine
type: string
value: sun4u
rctl:
name: zone.max-sem-ids
value: (priv=privileged,limit=100,action=deny)
rctl:
name: zone.max-shm-ids
value: (priv=privileged,limit=100,action=deny)
rctl:
name: zone.max-shm-memory
value: (priv=privileged,limit=4294967296,action=deny)
rctl:
name: zone.max-swap
value: (priv=privileged,limit=8589934592,action=deny)
rctl:
name: zone.max-locked-memory
value: (priv=privileged,limit=2147483648,action=deny)
rctl:
name: zone.cpu-cap
value: (priv=privileged,limit=200,action=deny)
Solaris 9 zone /etc/system file looks like:
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
* The directive below is not applicable in the virtualized environment.
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
set rlim_fd_max=65536
set rlim_fd_cur=60000
* The directive below is not applicable in the virtualized environment.
My questions are:
1. Application running in solaris 9 container generating core files. what to do???
2. My prstat -Z for zone shows almost 95% percent cpu usage. what to do???
3. Kindly can share how to move solaris 9 into solaris 10 containers ??

Based on the new questions for the same post you wrote in the other communities, some posts are removed as duplicate, here is the answer :
For the point #3, please look on table 17-1 in the following URL :
Zone Components - System Administration Guide: Oracle Solaris Containers-Resource Management and Oracle Solaris Zones
You can also customize your container /etc/system file but it cannot exceeds the global zone and the zone configuration value.
For the other point, #2, this can be complicated without a complete image of what the complete system do.
Try fist to check if you have not a busy process in your zone, then you can check if a bottleneck exists in the I/O side. You use maybe wrong parameters, a wrong configuration or your system configuration is insufficient in term of resources.
What I can see in the outputs that you provided is that the S9 zone uses the half of the swap space. This can impact your zone performance and I/O activity, and can have in this case a side effect on some processes. Check why your zone uses the swap and how you can remedy this.

Unable to remote control 'Windows 8' applications running as administrator using OCS 2007 R2

Hi,
While we are doing desktop sharing of a windows 8 system using OCS 2007, we are unable to control a few applications such as CMD Prompt - run as administrator, Device manager, Registry, etc.. even though the UAC setting is 'Never
notify'. Whereas, we are able to control all other applications without any issue. Is this a known issue?
Thanks,
CMR

Hi,
Yes, it is a known issue. Here are other threads for your reference:
http://social.technet.microsoft.com/Forums/lync/en-US/3765a320-c07c-41fe-85e0-1b41750c7218/lync-sharing-desktop-uac-promt-problem?forum=ocsclients
http://social.technet.microsoft.com/Forums/lync/en-US/ef3b0192-9802-42f7-9105-29c62caa5ffd/performing-administrative-tasks-in-a-lync-shared-desktop-session?forum=ocssecurity
http://terenceluk.blogspot.in/2011/03/lync-server-2010-desktop-share-issue.html
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Windows Forms Application Crashes Out with "Faulting module name: clr.dll"

OS: Windows 7
Framework: 4.5
Windows Form Application crashes while invoking printer settings method "printersettings.sethdevmode()"
Application: DHSDEVASystem.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.AccessViolationException
Stack:
   at System.Runtime.InteropServices.Marshal.CopyToManaged(IntPtr, System.Object, Int32, Int32)
   at System.Runtime.InteropServices.Marshal.Copy(IntPtr, Byte[], Int32, Int32)
   at System.Drawing.Printing.PrinterSettings.SetHdevmode(IntPtr)
   at DHSPresentationLayer.Logic.PrinterAPI.OpenPrinterPropertiesDialog(System.Drawing.Printing.PrinterSettings, System.Windows.Forms.Form)
   at DHSPresentationLayer.Logic.PrinterAPI.SendFileToPrinter(DHSPresentationLayer.Logic.PrinterInfo, System.String, System.Windows.Forms.Form)
   at DHSPresentationLayer.Logic.PrinterAPI.PrintLabel(System.String, System.String, System.Data.DataTable, System.Func`2<System.String,System.String>, System.String, System.String, Int32, System.Windows.Forms.Form)
   at DHSPresentationLayer.MRPFR130.showSSReport()
   at DHSPresentationLayer.MRPFR130.confirmCancelCloseButton_Confirm()
   at MINDBaseFormLibrary.BaseScreenReports.confirmCancelCloseControl1_EventButtonClicked(System.Object, DHSControlLibrary.MyEventArgs)
   at DHSControlLibrary.ConfirmCancelCloseControl.OnEventButtonClicked(DHSControlLibrary.MyEventArgs)
   at DHSControlLibrary.ConfirmCancelCloseControl.cmdConfirm_Click(System.Object, System.EventArgs)
   at System.Windows.Forms.Control.OnClick(System.EventArgs)
   at Infragistics.Win.Misc.UltraButtonBase.OnClick(System.EventArgs)
   at Infragistics.Win.Misc.UltraButton.OnMouseUp(System.Windows.Forms.MouseEventArgs)
   at System.Windows.Forms.Control.WmMouseUp(System.Windows.Forms.Message ByRef, System.Windows.Forms.MouseButtons, Int32)
   at System.Windows.Forms.Control.WndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.Control+ControlNativeWindow.OnMessage(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.Control+ControlNativeWindow.WndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
   at System.Windows.Forms.NativeWindow.DefWndProc(System.Windows.Forms.Message ByRef)
   at Infragistics.Win.UIAutomation.UiaProviderControlNativeWindow.WndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
   at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
   at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
   at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
   at System.Windows.Forms.Application.Run(System.Windows.Forms.Form)
   at DHSPresentationLayer.Program.Main()
then 1 second after :
Faulting application name: DHSDEVASystem.exe, version: 7.8.0.4, time stamp: 0x54c8f680
Faulting module name: MSVCR110_CLR0400.dll, version: 11.0.50709.17929, time stamp: 0x4ffa580c
Exception code: 0xc0000005
Fault offset: 0x0000156e
Faulting process id: 0x8ec
Faulting application start time: 0x01d046916142e1e3
Faulting application path: C:\Users\savaa\AppData\Local\Apps\2.0\DR9VMJ96.MZ3\DP07HVCX.MDB\dhsd..tion_0000000000000000_0007.0008_cfa90b0813b3f063\DHSDEVASystem.exe
Faulting module path: C:\Windows\system32\MSVCR110_CLR0400.dll
Report Id: 38cf9363-b285-11e4-b29f-0023242a2561
The PC is on windows 7 32 bits with .net 4.5 installed.

Hello,
Based on the exception message, I found that your project is build with .NET 4.0, you could consider changing it to .NET 4.5.
If you want to keep it built with .NET 4.0, then you could consider the following fix.
FIX: "Faulting module name: clr.dll" error message when you run a Microsoft .NET Framework 4-based application
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Application runs slower on Solaris

We have developed an Application in Java (Servlets, JSP & Core Java classes including thread).
My Application runs fast on Windows, but its terribly slow on Solaris. When the application is run on Solaris the CPU usage is very less around 3 to 5 % only and there is no major io bound operation also. Please comment on this behaviour when am running the application on Solaris.
For eg: A while loop in my program took around 16 msecs to execute in Windows machine, but the same while loop is taking 250 msecs to run in solaris.
Note: The solaris machine is very powerful than the desktop windows machine.
Thanks & Regards,
Salin

Which version of Solaris are you running and what threading library is currently in use? Did you use some profiling application to arrive at the benchmark results you obtained or some other means were used? Does the code within the while loop call any classes making use of Java threads and synchronization mechanisms?

Application Runs Under Windows 8.1 But Not Under Windows XP (I Know XP Is Deprecated)

The problem is with the obtuse error message put out by Windows's program loader. It reads, in part, "..is not a valid Win32 application." The application runs everywhere except on Windows XP. Looking for root cause of the problem. It's a very
simple application. Only a few lines of code.
C:\Packaged-Software\32-BIT\Reboot.exe is not a valid Win32 application.
Proposed nature of the problem:
1. The file was downloaded from a website but the download was incomplete.
2. The full file system filename path contains bad characters such blank space.
3. Visual Studio constructed an application that won't run anywhere much less on XP.
4. The supporting libraries are not properly installed (e.g. .NET Framework4, and VCREDIST).
Retorts:
1. The file wasn't downloaded from a website and is intact.
2. The filename path doesn't contain any spaces.
3. The application runs under Windows 8.1. Also on Windows 7.
4. The supporting libraries are properly installed.
So, what's the problem? One surely will not discover the root cause from "not a valid application."
Body must be 4 to 60000 characters long. I had put the code here. It isn't 60000 character long. But it validated as if there are more than 60000 characters. Sorry for the incomplete submission due to website construction error.
MARK D ROCKMAN

Hi F7H2fw,
How did you develop the application ?
Here is a similar symptom and this may explain the issue somehow:
Setup.exe is not a valid Win32 application
http://blogs.msdn.com/b/vsnetsetup/archive/2012/10/16/setup-exe-is-not-a-valid-win32-application.aspx
I suspect there is a compatibility issue here .
Considering this is more likely a developing issue .It is recommended to ask for help from our MSDN Forum .They are more familiar with the developing issue .If it is possible ,please attach the code in that thread .Thanks for your understanding and cooperation.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am not able to run a Windows Azure application

I have a very strange issue.
I am not able to run a windows azure application which has a WCF service and mschart in it. Following are the steps to reproduce the error:
1) Create a new windowsazureapplication with a blank asp.net webrole
2) Now add a new WCfService
3) run to check it runs ok
http://i.stack.imgur.com/1g6gW.png
4) now in one of the pages include mschart, and open the design of the page to make sure the webconfig is changed to use the mschart.
5) now try to run the project.
I am getting error message like this one:
enter image description here
Is this a problem with windows azure or am I doing somthing wrong?
FYI: This is not my first project on windows azure.
RuchitRami

As far as I know Toshiba doesnt support such Microsoft stuff so I think Microsoft is the right adres for such issues.
Have you already checked what Microsoft say about that?

Windows desktop application -- version of this file is not compatible with the version of Windows you're running

I am developing on 64-bit Windows7 Enterprise using VisualStudio 2013. I created a new Windows desktop VB.net application and just created a release build of the default solution/project targeting "Any CPU". I provided the EXE to a
colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see
whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
I changed the build configuration to create a "x86" build but my colleague received the same error. Any ideas why this would be happening (I checked and my colleague has .Net4 Framework installed as well)? Thank you for your time and
response!
Sunish Abraham
"The version of this file is not compatible with the version of Windows you're running.
Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."

Hi sunisha,
According to your description, you'd like to run the application in your colleague's computer.
I provided the EXE to a colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
If you want to test the application, you could provide the whole Debug folder to colleague instead of the single exe.
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
Check if the collegue's computer is running 64-bit windows:
Enter Control Panel, click on System and Security.
Under this, you can view the system type. This will describe whether you have 32-bit or 64-bit.
You can also try compatiblity mode.
If the program is not compatible, then you may try to install and run the program in compatibility mode.
Use the following steps:
1)   Right click on the Program
2)   Click on Properties
3)   Click on Compatibility tab
4)   Select Run this program in compatibility mode and select Windows Vista or whatever operating system the program was running successfully.
And if you still have questions, I suggest you deploy the application to the Local Network with clickOnce, then your collegue can install the application from the network.
#ClickOnce deployment
http://msdn.microsoft.com/en-us/library/t71a733d(VS.80).aspx
And also, you could recreate a new small application in your computer in Any CPU, then check if this small new application can work well in your colleague's computer. This can judge if the problem is caused by your application.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

After updating Firefox and Thunderbird from 8.0.1 to 9.0.1 I am no longer able to pin either application to the Windows 7 Toolbar (running Home Premium 64-bit).

After updating Firefox and Thunderbird from 8.0.1 to 9.0.1 I am no longer able to pin either application to the Windows 7 Toolbar (running Home Premium 64-bit).

I RESOLVED THE ISSUE. I uninstalled the converter. Re installed after a cold boot.
The sites that would not load properly: I did a ixquick search of the titles that wouldn't download and found them at another location. They then downloaded perfectly. from the new location

How to run Windows-only applications on Macs?

Is there a way to do this without having to purchase huge software programs (like Parallels, etc.)? I am only wanting to run 1 Windows-only application, not install the entire Windows-theme onto my laptop. Thanks for the help!

Eric,
there is Windows emulation software called Wine that can run many (but by no means all) Windows programs without needing a Windows installation. It is gratis, but on OS X you need to compile Wine yourself; they do not have precompiled downloadable disk images for OS X. However, a company called CodeWeavers does offer a precompiled version of Wine called CrossOver Mac for OS X, but it costs $59.95. They do have a gratis 14-day trial version, so you could download that to see if your lone Windows application would work well under OS X with it.

Running windows xp applications on a macbook air

I need to run some legacy windows xp applications in my new macbook air. What version of windows 7 I need to use?

Welcome to the Apple Support Communities
First, check that those applications are supported. Then, if you have to run apps that don't need all the performance of the Mac, just download Parallels, VMware Fusion or VirtualBox, and install Windows on a virtual machine. In this case, you can choose the Windows version and edition you want to install, but I recommend Windows 7.
If you have to run apps that requires the maximum performance, you have to use Boot Camp. In this case, you can only install Windows 7 Home Premium, Professional or Ultimate (it's better to run a 64-bit edition). To install Windows on Boot Camp, just open "Boot Camp Assistant" and follow these steps to install Windows > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
If you are going to use Boot Camp, please follow carefully the steps, because you can delete OS X by mistake and lose everything. Apart from that, you need an external optical drive to install Windows. Any will work with the MacBook

Install Acrobat 7 and CS2 applications - running Windows 2000 and IE 6

need to install replacment Acrobat 7 and CS2 applications - running Windows 2000 and IE 6. Any problems with this?

http://web.archive.org/web/20070203090721/http://www.adobe.com/products/creativesuite/syst emreqs.html

QuickStart application won't run on Solaris 10 x86

Installed Weblogic 8.1 on a Solaris 10 x86 system (from the pj_server814_generic.jar) using the graphical interface.
At the end of the install, attempted to run the QuickStart application, and nothing happened.
Tried to run it from the <WL_HOME>/common/bin directory, and got the message:
org/apache/xalan/processor/TransformerFactoryImpl
Unable to create graphical environment for QuickStartFrame.
Please use a console that supports a Java based GUI.
I installed Weblogic (and Oracle, also) using Java based GUI installers.
Have been unable to locate any information to help overcome this problem.
Has anyone run into this, and/or have any ideas on how to make QuickStart application run?

I have the same proble.
If I specify -log=/tmp/log at startup, the log file reports a missing class file.
2005-08-18 09:34:21,486 FATAL [WizardController] com.bea.plateng.wizard.WizardController - Exception
java.lang.NoClassDefFoundError: org/apache/xalan/processor/TransformerFactoryImpl
at weblogic.xml.jaxp.RegistryTransformerFactory.<init>(RegistryTransform
erFactory.java:62)
at weblogic.xml.jaxp.RegistrySAXTransformerFactory.<init>(RegistrySAXTra
nsformerFactory.java:12)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at javax.xml.transform.FactoryFinder.newInstance(FactoryFinder.java:100)
at javax.xml.transform.FactoryFinder.findJarServiceProvider(FactoryFinde
r.java:278)
at javax.xml.transform.FactoryFinder.find(FactoryFinder.java:185)
at javax.xml.transform.TransformerFactory.newInstance(TransformerFactory
.java:103)
at com.bea.plateng.gpr.model.BEAHomeBuilder.<clinit>(BEAHomeBuilder.java
:85)
at com.bea.plateng.domain.DomainTaskHelper.getJvmModel(DomainTaskHelper.
java:901)
at com.bea.plateng.domain.DomainTaskHelper.getJvmModel(DomainTaskHelper.
java:861)
at com.bea.plateng.wizard.domain.console.tasks.JVMSelectionConsoleTask.b
uildWidget(JVMSelectionConsoleTask.java:59)
at com.bea.plateng.wizard.console.tasks.ConsoleInteractTask2.setupUI(Con
soleInteractTask2.java:262)
at com.bea.plateng.wizard.console.tasks.AbstractConsoleTask.setupUI(Abst
ractConsoleTask.java:44)
at com.bea.plateng.wizard.WizardController.run(WizardController.java:563
at java.lang.Thread.run(Thread.java:595)
2005-08-18 09:34:21,489 INFO [WizardController] com.bea.plateng.wizard.WizardCo
ntroller - Terminating.

Develop on Windows, run on Solaris - Best Practices?

We're moving from windows 2003 server to Solaris x86-64/sparc environment - 10gR2 app server and db. Currently, since our servers are in a remote datacenter, we just VPN onto one of our windows server, which has the dev tools and standalone oc4j running so we can develop and test forms. Simple.
First thing we noticed is there is not a solaris x86-64 version of the dev tools, so we assume we'll have to develop on our windows desktops, and then recompile on the solaris server. So, the question is how best to do this?
Initial thinking is that each developer needs to have all the .olb,.pll,.jar,.fmb etc. files on their local machine compiled for windows, and then have to copy these to the solaris servers and recompile. This raises all kinds of concerns about how to keep the files on the developers machines in sync with the versions on the solaris servers.
Seems we are missing something here and there may be better methods to setup this environment. Perhaps use sparc workstations so we can develop natively in solaris, but that is an expensive option. Any ideas?

Hi,
Its better to develop in Windows and port it to
solaris. Thats what we do for our implementations.
All the developers has all the source code in the
local desktop. And when ever they want to change
/update a form, they download it from
development/prodn in solaris to the local desktop.
At a time usually one developer will work on a form
and that can be put to the solaris and compiled there
in order to test.
Rajesh ALexWhat about the .pll, .jar, .olb files? Do your developers have to download to their local machines each time they open form builder to get the latest versions? Seems a maintenance nightmare to keep local versions of these files up to date with what is on the servers.
Perhaps we need to look at some source control software that can manage this. Any out there that work with forms?

I recently subscribed to acrobat pro. I downloaded it, but can't open it. I keep getting the window saying application quit unexpectedly. I running Mavericks. Is that a separate download? Where do I get it?

I recently subscribed to acrobat pro. I downloaded it, but can’t open it. I keep getting the window saying application quit unexpectedly. I running Mavericks. Is that a separate download? Where do I get it? I downloaded on Safari. Should I have used Firefox?

Hi Kenglade,
Are you still facing this issue?
If yes please try follow below mentioned steps and let me know if that helps:
    1. Start you Mac in Safe Mode: http://support.apple.com/kb/HT1564?viewlocale=en_US
    2. Once you are in Safe mode, Disk repair using Disk utility: https://us.battle.net/support/en/article/repair-disk-permissions-and-repair-disk
    3. If the above steps didn’t help, you may try to enable root account and check the issue from there
    How to enable root account: http://support.apple.com/kb/PH14281
Regards,
Ajlan Huda.

Window's application run on solaris

Similar Messages

Maybe you are looking for