WIndow scrolling and refresh issues.

I am having problems with intermittent window scrolling and refreshing. I noticed it first in Safari but I have confirmed it is happening in other applications as well. Typically I have no problems with window scrolling and refreshing. At times however, it becomes sluggish. For instance, I will be reading a web page and attempt to scroll down and the there will be a delay of approximately one or two seconds before the window updates. This occurs whether I am using the keyboard, trackpad or mouse to scroll. There is no video tearing or graphics artifacts, just a delay followed by an updated window. During this time, moving windows also results in a delay of one or two seconds. Again, there is no tearing or artifacts, the window just appears in it's new positioning seconds later. This unfortunately makes the system near unusable as I can not accurately scroll or position. The problem occurs whether or not I have a significant number of applications and the CPU and memory usage is not abnormal. Restarting solves the problem temporarily but it still returns. Oddly, activating show desktop or show all windows via Expose eliminates the problem for some time as well until it returns later. My system is up to date with 10.5.6.
Seems like a problem with WindowServer. Has anyone seen this before or have any suggestions?

Did you ever get an answer to your window scrolling issue. My new PowerMac seems to always have this issue now. (I just moved to the Intel platform from the G4.) Thanks for any help you can give.

Similar Messages

  • Migration from windows xp to windows 7 and refresh (reinstall windows 7)

    i have created windows xp to windows 7 migration task sequence but not working as expected plaese assit me migration from windows xp to windows 7 and refresh (reinstall windows 7 just reinstall windows 7 with out format so that i can retrieve my documents,
    desktop, profiles and Complete C drive with installation application)

    This question is way too general, sccm ghost. Why is it not working? What is (not) happening? What does smsts.log tell? How are you trying to migrate data?
    Torsten Meringer | http://www.mssccmfaq.de

  • Windows 7 and photosmartD5460 issue

    I have a photosmart D5460 and windows 7 after i installed win7 i could not print anymore on DVD's
    uninstalled and installed again got other drivers to print covers on dvd nothing is working can anyone help?

    Leeopard huh?
    You need Snow Leopard w. 10.6.x to get 3.0.
    If it works and no issues fine though probably the first time I have read someone did.
    BC 2.2 was more about XP and some support for Vista.

  • Windows 8 and Itunes Issues

    I just recently got windows 8. Event though I purchased new songs through itunes, I cannot access them now, nor can I transfer my songs from my ipod to my laptop. There may be compatibility issues with Windows 8 and itunes. Any suggestions?

    Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

  • Windows 8 and Bonjour issues

    I have an Epson NX415 printer scanner connected to an iMac running OSX 10.7.5 through USB. The printer has been shared and I can print from several devices including a Macbook Pro, an iPad, and older Macbook. My wife's previous computer, running Windows 7, was also able to print. She now has a new laptop running Windows 8. I have installed the latest version of Bonjour on this machine. When I try to add the printer through Bonjour, I get the message "You do not have sufficient access to your computer to connect to the selected printer." I have tried everything I can find on the internet and nothing works. What am I missing?

    Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

  • Windows 7 In Place Upgrade Pre-Windows boot and Graphics issue Alienware M17x

    So I'm having multiple issues here.  The first issue surfaced immediately after I removed and reinserted my graphics card.  For reference The computer in question is an Alienware M17XR3 with an AMD 6870m.  Anyhow, The issue I had then was
    that my built in display showed a black screen (would see a quick flicker of what was supposed to be on it when changing display settings but then a black screen) after Windows botted up.  I could use an external monitor with no problem, and safe mode
    or Windows without graphics drivers allowed everything to run normally.  The on screen display also works normally on boot screens or boot disks such as the windows install disk and Hyrens boot CD.  I am assuming my graphics card is shot.  Either
    that or my motherboard.  Input on this is greatly appreciated.  I do intend to upgrade it myself to a 6970m, but I won't have the money until another 1 or 2 paychecks roll around, and I woulld like to be able to use the on-screen display sooner than
    that.
    Anyhow, to ensure that it is a hardware issue, rather than a software issue, I cleaned old drivers then installed drivers I knew were fully functional.  I did this several times with several driver versions.  Nothing yielded any results.  I
    do not wish to do aclean install unless absolutely necessary or at least not until after the weekend, when I will have time to reinstall my 300+programs, games, themes, mods, etc.  I am not opposed to doing this but I need the computer tonight and
    do not have time to do all that before then.  I'll be using it with an external display tonight, so the graphics issue can wait, however, to test with a clean install, I was using Aomei Partition Assistant to break off some free space as a second partition
    on which I could install a second Windows 7 installation for testing purposes.  I have done this multiple times before.  Unfortunatly, on 4.5 hours of sleep and having been up for about 18 hours straight I wasn't thinking and forgot to plug my laptop
    in.  It lost power during the process and the Windows installation is now totally glitched.  I've tried several fixes all to no avail and would prefer to avoid a clean install until after the weekend.
    In Windows XP, I could boot from the install disk and perform a repair install, similar to the Windows 7 upgrade/in place upgrade.  I would like to do this, but seeing as I cannot access the Windows environment, I'm in a bit of a jam.  I could
    run that program again from mini Windows XP (Hyren's Boot CD) I believe and create the second partition and dual boot.  My question is, can I drop the new Windows folder over the old one or do something similar to avoid losing my programs and files?  Thanks

    Hi,
    Based on my knowledge, we cannot just copy the windows folder to make programs work in the new operating system.
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • Safari browser and refreshing issue.

    Lets say I am on a forum page, I can refresh the page in two ways. Either I hit the refresh button on top or hit the bookmark page of the same page. This works on my old phone and the replacement, except for facebook issue.
    On facebook, it did it this way before the replacement phone from Verizon and on the replacement it doesn't do it. I have to hit the refresh button on top, it doesn't refresh from the bookmark page. Also if I am on my feed, it automatically refreshes and goes to the top, sometimes. Is this a facebook issue or a certain setting. If it's just facebook, I don't really care but I don't want this issue on other Internet pages, kind of annoying.
    Thanks, sorry for Grammar issue or if confusing question.

    The bookmark button is not supposed to refresh it as of newer iOS operating systems

  • Consistent windows errors and installation issues with win 7

    I am experiencing repeated blue screen errors (bad pool error and failed to clock interrupt among others) and now have issues with enabling windows firewall (error 8007042c) among various other windows errors also windows restore is not working would appreciate
    any advice thank you.

    Hi,
    Please refer to this KB to troubleshoot the windows firewall (error 8007042c), begin with scanning for malware.
    http://support.microsoft.com/kb/2530126
    Regarding to the blue screen, I sugegst you keep Windows up-to-date, install latest drivers, if this doesn't help, please upload the latest dump files to a public location like OneDrive, then paste the downlaod link here for further analysis. (default location:
    %SystemRoot%\MEMORY.DMP or minidump)
    http://windows.microsoft.com/en-in/onedrive/share-file-folder
    Yolanda Zhu
    TechNet Community Support

  • How to fix finder window shrink and resize issue

    Macbook pro retina 13in running 8.1. Finder window, when in full screen, changes size; shrinks from bottom of screen. After moving a file or two from one folder to another, finder window changes size; gets smaller (bottom frame moves upwards) as if the dock is occupying the space; but no dock is shown until I hover on the dock with mouse. Also, upper portion of finder window goes under title bar as seen in screenshot. Any know issues or fix?

    Greg, in addition to Scott's suggestion, when you choose "Greg" (your Home folder) are there 2 "home" folders in there or just on the sidebar? If there are 2 make sure one is empty and delete it.
    If not try this:
    Navigate to ~(yourhome)/library/preferences and trash these two files:
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    (You will have to reset a few finder prefs the way you like them.)
    Then log out and back in again.
    Let us know.
    -mj
    [email protected]

  • Windows 8 and touchpad issues

    I upgraded an old Toshiba L45-S7423 laptop from Windows XP to Windows 8 Pro recently via CD/DVD. A couple of days later, the touchpad stopped working, but a USB mouse works just fine. The touchpad issue might be related to a Windows update that occurred
    about the same time. The laptop has been running Windows XP for several years without issues other than slow boot and shutdown. Of course, I know very little about Windows 8. Any ideas on how to proceed. Thanks!

    Hi,
    It seems the issue is more related to the driver update from Microsoft site. I recommend performing System Restore first. Then, you may prevent installing the hardware driver updates from Microsoft right now.
    Kim Zhou
    TechNet Community Support

  • Window size, and navigation issues with Web Dynpro and GP

    I have a Web Dynpro application which navigates to other Web Dynpro applications.  I also need to integrate this application into a GP.  When I create a process that calls the Web Dynpro app, two things I've noticed are:
    1. The window size presented in the GP process is too small, and there is no way to scroll to see the rest of the app.  How can I change the initial size of the Window to show the entire application?  This is an absolute show stopper...
    2. Other functionality is made available to the Web Dynpro app by navigating to other Web Dynpro applications.  Outside of the GP, this works correctly.  However, from within the application when started via a GP, I get the following error when I try to trigger an action that will lead to a navigation event:
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Cannot navigate via outbound plug CreatePdf of view TestView because there is no navigational link attached to it
        at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:541)
        at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
    Any ideas? Do I have to manually instantiate the various components when the root Web Dynpro app is called from a GP?

    Update: this was my mistake - I had neglected to configure all the view containers in the WebDynproCO window, which was generated by adding the GP interface to the component.  All is well.

  • ThinkPad SL510 Hotkey issue on Windows 10 and brigtness issue

    Hi these are my issues.I have upgraded from Windows 7 to Windows 10.But now i found that the hotkeys shortcuts for brigtness with the key Fn  don't work good. ( the sound hotkeys work perfect.) The brightness can't be controlled with the Fn+brigthness up key   or Fn+brightness down key  ( the bar that indicates the brightness blinks like something is wrong). I fast grab the bar before dissapear with the mouse and i can control it, with mouse. Most of all i find something very weird on the brightness of the screen as I am sure as i set the brightness on the lowest level  the brightness was lower with Windows 7. I mean sometimes I want the brightness on the most lower level. But with Windows 10 even in the lowest level the screen is more bright from Windows 7.  My laptop is SL 510  with Windows 10 upgraded from 7 in Greek language. Thanks a lot.

    I have similar problems with my Thinkpad SL510 (type: 2847-6JG, S/N: LR ALE01):After I updated from Windows 7 x64 to Windows 10, the multimedia key that should mute the speakers was not working anymore.I have no problems with the brightness control hotkeys. Also the Lock hotkey (fn+f2), the Sleep hotkey (fn+f4), the Projector hotkey (fn+f7), the Num Lock hotkey (fn+f10), the Hibernate hotkey (fn+f12) and the Print Screen hotkey are working fine.So the hotkeys that didn't work were: the battery hotkey (fn+ f3), the wireless hotkey (fn+f5), the conference (webcam+mic) hotkey (fn+f6) and the trackpad+trackpoint hotkey (fn+f8).Here is what I managed to fix:1. After I installed the Lenovo Settings app ( https://www.microsoft.com/en-us/store/apps/lenovo-settings/9wzdncrfj12p ) my camera and mic hotkey (fn+f6) begin to work.2. After I installed Hotkey Features Integration for Windows 10 ( http://support.lenovo.com/us/en/downloads/ds029026 ) - which was NOT designed for SL510 but is the only one I could find that was made specifically for Win 10 and Thinkpads -, my multimedia keys (including mute for speakers) were working fine BUT none of the hotkeys were working anymore, except for the brightness ones that were stil working fine. Therefore I uninstalled this and reinstalled the old one: Hotkey Features Integration for Windows 8 ( http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-sl-series-laptops/thinkpad-sl510/downloads/DS014985 ) which fixed the hotkeys problem but also made the mute key unresponsive again.Here is what else I've tried without any success:1. installing the new power management for win 10 ( http://support.lenovo.com/us/en/downloads/migr-4gxpeg )2. reinstalling old power management for win 7 ( http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-sl-series-laptops/thinkpad-sl510/downloads/DS101347 )3. instaling some of the Wi-fi Drivers　TL;DRDedicated mute key for speakers, Battery hotkey (fn+f3), Wireless hotkey (fn+f5), Trackpad hotkey (fn+f8), not working on Thinkpad SL510 after updating from win7 to win10! Any helpful ideas?Thanks LATER EDIT:after trying @tasn sollution and uninstalling the hotkey driver using  http://support.lenovo.com/us/en/downloads/migr-74261, the mute button for the speakers started to work, but now the mute button for the Mic is not working anymore...

  • Public Folders calendars updates and refreshing issues

    Hi,
    We have calendars we use under the Public Folders, but for some users it does not want to refresh right away, so user A inserts an entry in one of the Calendars, they do not see the entry they just saved inside the calendar at all. They try to add the same
    entry again they get message are you sure you want to delete this entry !!
    But if they add an entry and go back to mail view and go back in calendar view on their Outlook 2010 they sometimes see the entry they just made and sometimes double entries for same event as well because of the "delete this entry " message.
    So the public folders calendars are not refreshing right away when users are entering an event, and also at instances other users will not be able to see the event either till they close out of outlook and re-open it.
    It is bit of a nuisance, found this thread with similar problem but they are talking about exchange 2010 we are on exchange 2013 with CU1 (too afraid to upgrade to CU2 because of all the horror stories).
    Is there any other way to have these public calendars that might refresh faster instead of using the Public Folders, if i am not mistaken MS has always tried to get away from using Public Folders and their development has been poor.
    http://social.technet.microsoft.com/Forums/exchange/en-US/f96df4f4-a554-4b4e-a7bd-c9f639b09216/public-folders-calendar-extremely-slow?forum=exchangesvradminlegacy

    Few things :
    If i do decide to jump to CU3 , can it be directly from CU1 to CU3 jump ?
    - I have not used resource mailboxes but are they not just "mailboxes" i want users to be able to see the calendars and the events posted in them, these resource mailboxes seem to be more geared towards booking a room or some multimedia equipment.
    Yes. You can go straight to CU3.
    Sure, they are just mailboxes, but users can open the shared calendar. Most people probably use them for booking - true, but you can use it the way any want of course and keep it simple.
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Somebody HELP!!! windows vista and Ipod Issues

    Ok I downloaded the latest version of Itunes, I reset the Ipod, but for some reason my computer when I conect the usb cable the "found new hardware" windows pops up, I do not have a software to install for Ipod and the only thing I can find on the website are manuals to download, also my Itunes won't even see the Ipod hooked to the computer, nothing happens, zero, nada and it's killing me. I updated all the windows updates including the kb936824, which supposely would help me and still nothing happens. Also my Itunes its empty none of my songs are in there. can somebody smarter than me help me? I'm starting to regret getting a windowns vista pc.
    Gateway   Windows Vista  
    Gateway   Windows Vista  

    Well, although iTunes 7.1.0.59 (and now 7.1.1.5) cleared up some problems with running/installing iTunes software on it, Vista isn't really officially compatible at the moment.
    What exactly is happening when installing the iTunes/iPod software?
    If you are getting any error messages, please quote what ehey say, and/or when the problem occurs.
    Be sure that you've upgraded to the latest iTunes version (7.1.1.5). Here is the download page for it:
    Download iTunes - 7.1.1.5
    -Kylene

  • Growing file import and refresh issues

    1) With files generated by our own MOV/op1a writers, we get different results with different wappers, different OS platforms and versions, and different storage filesystems, both using CC 7.1 and CS6.05 
    Quicktime files on the Mac, OS 10.7.5 to a Samba share: refresh will only work by putting Premiere into the background then bringing it to the foreground to force the update. 
    Quicktime files (any codec) on a win7 PC writing to an NTFS share: we get sporadic updates, although in about 98% of sessions, the file will update once or twice after import and then never again during that particular CC/CS6 session. Exiting the program, reopening it and loading the project again will update the duration.  After closing the file, the duration updates instantly in both CC/CS6
    -- For Quicktime files, it seems like some sort of cache file is written that does not get updatedand premiere looks at this instead of polling the current state of the file.
    op1a XDCAM - on PC at least we get a sharing violation when attempting to open, much as in this discussion on the Adobe Community Premiere site: http://forums.adobe.com/message/4746601
    op1a AVC-I not tested yet.
    2) With Adobe Media Encoder CC doing the writing, we get no joy whatsoever.  Only tested on win7/NTFS share
    op1a XDCAM on import CS6/CC returns "file is open in another program" error.
    op1a AVC-I on import CS6/CC returns "file is open in another program" error.
    Quicktime (any codec) file import error or crash.
    All types import correctly after the files are closed.
    -- seems that the AME openfile() handle type is write-only, so Premiere can't open it for reading.
    So...I guess my first question is, what growing file source has this feature been tested with, on which OS and storage filesystems?
    There is virtually zero documentation and what little exists is very unspecific or contradictory...

    Ken,
    There are numerous posts on this subject. Currently LR treats same name, different extension files as sidecars of each other. Check out the numeroues RAW + JPG posts for example.
    Import your files into different folders and then move them into the folder you want for now.
    Hopefully this behaviour will be changed in the forthcoming 1.1 release mentioned by Jeff Schewe et al.

Maybe you are looking for