Window Server 2008-Issue running my website on local webserver-ie issue

I hosted my website on my local webserver (Window Server 2008), and when I run it on
iE8 & iE11 the website doesn't look good, my navigation bar brakes, and my image slider breaks too. It is not a browser
issue because, I have hosted the same website on the Goddady servers, and it works fine with
iE8&
iE11. And also on my local webserver when I try to run it on the google chrome it works fine, but on the Internet Explorer comes out with that problem. Do you guys think is a problem with my IIS on my Server? Any help/suggestion/advice I would
really appreciate it.
Thanks,
Samet

Might ask them over here.
http://forums.iis.net/
or for web development issues over here.
http://forums.asp.net/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Weblogic 11g on windows server 2008 - run WLST

how to configure weblogic 11g on windows server 2008 to run a simple WLST script
I managed to get so far on Windows to run a WLST script. Most examples are in Unix
I am in Dos, and ran our set environment variables.
Run java weblogic.WLST
To use WLST in interactive mode:java weblogic.WLST
I get as far as wls:/offline> connect('weblogic','weblogic','localhost:7001')
This works,
So now I am trying to figure out how to display the server state of the server, most examples are for unix.
Would any one have one that shows the server state, number of connections, and the number of active threads or stuck.
Just a a pointer would help me.
Cheers

You can refer this
http://weblogic-wonders.com/weblogic/2010/11/13/wlst-script-to-monitor-throughput-and-heapsize-of-weblogic-server/

Microsoft support for Windows Server 2008 R2 on vSphere 5.5

Hi, everybody.
I'm checking if Microsoft will provide support for Windows Server 2008 R2 running on a VM on vSphere 5.5 Update 2. So far what I've found at
http://windowsservercatalog.com is:
Filtering vendor VMware and Windows Server 2008 R2, it shows vSphere up to version 5.0 update 1
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=34&ava=0&avq=0&OR=1&PGS=25&ready=0
http://www.windowsservercatalog.com/item.aspx?idItem=c92e5cbd-9690-b62a-2ace-843390ac3ea4&bCatID=1521
Filtering vendor VMware it shows vSphere 5.5 update 2, but details only Windows Server 2012, not Windows Server 2008 R2.
http://www.windowsservercatalog.com/results.aspx?&chtext=&cstext=&csttext=&chbtext=&bCatID=1521&cpID=2274&avc=0&ava=0&avq=0&OR=1&PGS=25&ready=0&PG=2
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
Does that mean Microsoft doesn't support Windows 2008 R2 on vSphere 5.5 update 2?
I'm aware Windows Server 2008 R2 lifecycle is close to EOL, but customer requires this specific version for application compatibility.
Thanks

Hi mdgrkb,
Products that have passed the SVVP requirements for Windows Server 2012 R2 are considered supported on Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, and
Windows Server 2003 SP2 and later Service Packs, both x86 and x64.
Look this website the top left additional information:
http://www.windowsservercatalog.com/item.aspx?idItem=ef39c5b2-2f5b-5b73-08e2-c07fecdadcff&bCatID=1521
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Server 2008 x64 and Crystal Reports Server Embedded

We're attempting to certify our software with Windows Server 2008 x64 and want to know the best way to configure both the server and client of Crystal Reports Server Embedded. Currently, our software is certified against Windows Server 2003 x86, and we install Crystal Reports Server Embedded XI Release 2 (no SP) on the application server, and we deploy the Crystal Reports .NET merge modules for XI Release 2 (no SP) on any client machines.
I believe I am correct in stating that no version of Crystal Reports Server Embedded officially supports Windows Server 2008 x64 (based on some other forum postings) until SP1 comes out (which I don't think has happened at this point). If that is true, we can live with installing the RAS on a separate Windows Server 2003 x64, if that's even possible. With that said, can we even get our Windows Server 2008 x64 running with the latest Crystal Reports 2008 .NET merge modules? We've tried many different configurations between CR XI R2 SPs and CR 2008 for both client and server and have very little luck (either it won't install correctly because of x64 or missing .cabs, etc.) on both the client and server side of things.
Can someone suggest the optimal configuration when Windows Server 2008 x64 is in the mix, noting that we can use a secondary Windows Server 2003 (x64 preferred but can fallback to x86)? Or do we have to wait for Crystal Reports Server Embedded 2008 SP1 to be released, and if so, does anyone know of the date?
Thanks,
Ross Beehler

CRSE 2008 is a 32 bit app, it works on 64 bit OS's but all parts must also be running in 32 bit mode.

Windows Server 2008 x64 on Bootcamp: Ethernet drivers missing/not working

Hello folks,
at the moment I try to get Windows Server 2008 x64 running on a new Mac Pro (Early 2009).
Installation of Windows Server 2008 x64 (Enterprise) worked out of the box. However, the ethernet drivers do not work. Ethernet cards are not detected and working due to missing drivers.
I have tried several different Intel driver packages. All of them report "No intel card found.". However, the vendor ID of the ethernet card clearly points to Intel.
I have not been able to find a driver yet, does anyone have an idea?
E.g. does someone know the exact chip name? The driver "name"? Anything else?
Thank you in advance,
Stefan

Erik - Thanks for the info!
I use 64-bit applications ... some notes on why:
enterprise supports up to 32GB of memory so the argument to use x64 for memory support is nullified.
... that's not correct. x64 windows versions allow 64-bit addressing, so 64-bit applications created for x64 windows can take advantage of large amounts of cheap RAM as 32-bit applications cannot. 32-bit applications (they are all 32-bit applications in a 32-bit Windows version, even in Server 2008) are restricted to a limited process space of at most 2 GB.
It's true there is a LARGEADDRESSAWARE kludge to enable limited use of up to 3 GB by a user process (and there is an equivalent to this in Server 2008), but this has gone nowhere because it is far more straightforward and more productive for an applications developer to simply go 64-bit rather than invest any engineering resources into a one-of-a-kind kludge for an era that is already past.
Yes, it is true that if you are stuck running 32-bit applications you have less incentive to use x64 windows. But going true 64-bit is a huge advantage in reliability and performance. Given the very low cost of RAM in modern times it makes sense to do so, even in notebook settings that are often limited to only 4 GB of RAM. 64-bit applications in Windows tend to have decisive performance and reliability advantages so whenever one competitor in a given segment makes the jump to 64-bit pretty much all of them must do so.

What does "NetworkInterface getDisplayName()" refer to in windows server 2008 ?

Hi experts,
I want to know what file "NetworkInterface getDisplayName()" refer to in Windows Server 2008 when running java program.
Device Manager doesn't show all network interface like "RAS Async Adapter".
I run the following program.
===========Program================
import java.util.*;
import java.net.NetworkInterface;
import java.net.SocketException;
public class TEST1 {
public static void main(String[] args) throws SocketException {
// TODO Auto-generated method stub
for (Enumeration<NetworkInterface> interfaces = NetworkInterface.getNetworkInterfaces(); interfaces.hasMoreElements();) {
final NetworkInterface networkInterface = interfaces.nextElement();
final String displayName = networkInterface.getDisplayName();
final String name = networkInterface.getName();
System.out.println("-[DisplayName]:" + displayName+" [Name]:"+name);
==========Result===================
-[DisplayName]:Software Loopback Interface 1 [Name]:lo
-[DisplayName]:WAN Miniport (SSTP) [Name]:net0
-[DisplayName]:WAN Miniport (IKEv2) [Name]:net1
-[DisplayName]:WAN Miniport (L2TP) [Name]:net2
-[DisplayName]:WAN Miniport (PPTP) [Name]:net3
-[DisplayName]:WAN Miniport (PPPOE) [Name]:ppp0
-[DisplayName]:WAN Miniport (IPv6) [Name]:eth0
-[DisplayName]:WAN Miniport (Network Monitor) [Name]:eth1
-[DisplayName]:WAN Miniport (IP) [Name]:eth2
-[DisplayName]:RAS Async Adapter [Name]:ppp1
-[DisplayName]:Intel(R) PRO/1000 MT Network Connection [Name]:eth3
-[DisplayName]:Microsoft ISATAP Adapter [Name]:net4
-[DisplayName]:Teredo Tunneling Pseudo-Interface [Name]:net5
-[DisplayName]:Microsoft Loopback Adapter [Name]:eth4
-[DisplayName]:Microsoft ISATAP Adapter #2 [Name]:net6
-[DisplayName]:Intel(R) PRO/1000 MT Network Connection-QoS Packet Scheduler-0000 [Name]:eth5
-[DisplayName]:Intel(R) PRO/1000 MT Network Connection-WFP LightWeight Filter-0000 [Name]:eth6
-[DisplayName]:Microsoft Loopback Adapter-QoS Packet Scheduler-0000 [Name]:eth7
-[DisplayName]:Microsoft Loopback Adapter-WFP LightWeight Filter-0000 [Name]:eth8
-[DisplayName]:WAN Miniport (IPv6)-QoS Packet Scheduler-0000 [Name]:eth9
-[DisplayName]:WAN Miniport (IP)-QoS Packet Scheduler-0000 [Name]:eth10
-[DisplayName]:WAN Miniport (Network Monitor)-QoS Packet Scheduler-0000 [Name]:eth11
Best regards,
Keita

I'm not asking what there devices are.
I would like to know what file Java read information from in Windows OS.
Registry ? or other file ?

Windows server 2008 R2 keeps restarting itself randomly

Does anyone know why my Windows server 2008 R2, run by VMWare Fusion keep restarting randomly? Could it be that it says it is not genuine windows?

I checked the event log, there are errors regarding report server license expired, could it be that??
The application domain WindowsService_0 failed to start. Error: Microsoft.ReportingServices.Diagnostics.Utilities.EvaluationCopyExpiredException: The evaluation period for this instance of Microsoft SQL Server Reporting Services has expired. A license
is now required.
Server stack trace:
   at Microsoft.ReportingServices.Diagnostics.Sku.<>c__DisplayClass1.<GetSkuFromSqlBoot>b__0()
   at Microsoft.ReportingServices.Diagnostics.RevertImpersonationContext.<>c__DisplayClass1.<Run>b__0(Object state)
   at System.Security.SecurityContext.Run(SecurityContext securityContext, ContextCallback callback, Object state)
   at Microsoft.ReportingServices.Diagnostics.RevertImpersonationContext.Run(ContextBody callback)
   at Microsoft.ReportingServices.Diagnostics.Sku.GetSkuFromSqlBoot(String instanceId, Int32& outDaysLeft)
   at Microsoft.ReportingServices.Diagnostics.Sku.GetInstalledSku(String instanceId)
   at Microsoft.ReportingServices.Diagnostics.Sku.IsFeatureEnabled(String instanceId, RestrictedFeatures feature)
   at Microsoft.ReportingServices.Diagnostics.ResourceUtilities.LogCPUAndThrottleIfNecessary()
   at Microsoft.ReportingServices.Library.ServiceAppDomain.StartService(IServiceAppDomainController appDomainController, Boolean firstStart)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg, Int32 methodPtr, Boolean fExecuteInContext)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.ReportingServices.Library.IServiceAppDomain.StartService(IServiceAppDomainController controller, Boolean firstStart)
   at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartServiceInNewAppDomain(Boolean firstTime).

How to configure ipsec policy on windows server 2008 r2 to permit local machine only access to gateway,one other server and it's local ip?

I have applied IPsec policy on local machine(ip address:10.82.138.76) with windows server 2008 ent r2 installed,only permit local machine to comunicate with itself,one other server(ip address:10.82.138.77) and the gateway device(ip address:10.82.138.1).After
i asigned this policy,i can ping the gateway (ip address:10.82.138.1),and the other server(ip address:10.82.138.77),but i can't ping local machine itself(ip address:10.82.138.76),could anybody tell me why and how to solve this problem?When i applied the same
policy to windows server 2003 ent,i can ping the local machine ip address.

Hi,
Thanks for your post.
First, try to ping the loopback address 127.0.0.1. If the loopback test succeeds but you cannot ping the local IP address, please post the unedited
ipconfig /all and route print of the problematic computer.
For test purpose, you may refer to the following lab step by step guide to deployment Tunnel Mode IPsec. Hope it helps.
Windows Firewall and IPsec Policy Deployment Step-by-Step Guide
http://technet.microsoft.com/en-us/library/cc732400(v=ws.10)
Connection Security and IPsec
http://technet.microsoft.com/en-us/library/cc771593(v=ws.10).aspx
Connection Security Rule Wizard: Tunnel Endpoints Page - Client-to-Gateway
http://technet.microsoft.com/en-us/library/dd759083
Best Regards,
Aiden
Aiden Cao
TechNet Community Support

Drivers for Windows Server 2008 and HDD issues

Recently I have had the hard drive with my OS fail. After replacing the hard drive and reinstalling windows server 2008 I seem to have run into a few issues with drivers. After insalling Windows, I had 3 items in my device manager that did not install properly. I was able to get the driver for the LAN port to work but I have not gotten the driver for "Standard VGA Graphics Adapter" and "SM Bus Controller". After a little research, I believe the video card is a Radeon HD4350. With that information I still have been unable toinstlal the correct drivers for either of these items. I've tried several drivers listed on the drivers support page on HP's website but all fo them return the same error about not finding the correct Operating System. The link to the driver I used originally on my previous installation seems to not be valid any longer.
Also I can't seem to access the two additoinal hard drives (connected by sata). They were used with the previous installation of windows with no issues. They appear in the device manager but do not show up under My Computer. A removeable drive does show up that I'm not sure what it is. Previously I had used software to mirror one of the drives onto the other as to prevent losing data if a drive would fail. Is one of the above drives causing the issue with not being able to access the drives or did the software used before cause the problem?
Any help on these issues is greatly appreciated.
This question was solved.
View Solution.

OK.
I can't help you with the drives then. That is out of my realm of knowledge. If they are marked healthy and active in the disk management utility, then that is all I know that they should be indicated.
As for the graphics driver...
Download and install this free file utility.
http://www.7-zip.org/
After you install 7-zip, right click on the graphics driver file and select 7-zip from the list of options.
Select 7-zip to Extract to: and let it extract the file into a folder. I let it extract to the file name of the folder.
Then just follow the rest of my instructions to install the driver.
Of course you will first browse to where 7-zip has extracted the folder to, and proceed from there.

Is it possible to install and run Windows Server 2008 on a Mac Mini Server in a Virtual Machine software like Parallels

I am wondering if it is possible to install and run Windows Server 2008 on a Mac Mini Server as a VM as my main application uses Windows VisualBasic and Fox Pro and requires a Static IP to connect to it, My other offices connects to Windows Server via RDP.
Basically I am researching a Server for the same purpose and since Mac Mini and OsX both are robust in nature it can fit the bill if every thing work fine.
Thanks

From the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed.

Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw

Hi,
I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to update
data that is pulled from a SQL Server at regular intervals), it fails with the following error:
Microsoft Office Excel cannot access the file 'c:\test\SampleWorkbook.xlsm'. There are several possible reasons: .....
The file does exist. The path reported in the error is correct. The account under which the task is running is the same account I use to run it from the command line. User Account Control is not enabled, and the task is set up to run with highest privileges.
When I run the same script through the Task Scheduler from a Windows Server 2003 machine, it works without issue.
I was just wondering if somebody on this forum has run into a similar issue in connection with Windows Server 2008 R2 and figured out what the magic trick is to make it work. I'm sure it is rights related, but I haven't quite figured out what which rights
are missing.
Thanks in advance for any advice you may have.

This is truly killing me ... trying to get it working on Windows Server 2012 without success.
I desperately need to automate running Excel macros in a "headless" environment, that is non-interactive, non-GUI, etc.
I can get it to work using Excel.Application COM, either via VBScript or Powershell, successfully on many other Windows systems in our environment - Windows Server 2008 R2, Windows 7 (32-bit), etc., -BUT-
The two servers we built out for running our automation process are Windows Server 2012 (SE) - and it just refuses to run on the 2012 servers - it gives the messages below from VBScript and PowerShell, respectively-
I have tried uninstalling and re-installing several different versions of Microsoft Excel (2007 Standard, 2010 Standard, 2010 Professional Plus, 32-bit vs. 64-bit, etc.), but it makes no difference.
Would be extremely grateful if any one out there has had any success in running Excel automation on Server 2012 in a non-interactive environment that they could share.
( I have tried adding the "%windir%\syswow64\config\systemprofile\desktop"
folder, which did fix the issue for me when testing on Windows Server 2008 R2, but sadly did not resolve it on Windows Server 2012 )
[VBScript error msg]
Z:\TestExcelMacro.vbs(35, 1) Microsoft Office Excel: Microsoft Office Excel cannot
access the file 'Z:\TestExcelMacro.xlsm'. There are several possible reasons:
• The file name or path does not exist.
• The file is being used by another program.
• The workbook you are trying to save has the same name as a currently open work
[Powershell error msg]
Exception calling "Add" with "0" argument(s): "Microsoft Office Excel cannot open or save any more documents because th
ere is not enough available memory or disk space.
To make more memory available, close workbooks or programs you no longer need.
To free disk space, delete files you no longer need from the disk you are saving to."
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ComMethodTargetInvocation
You cannot call a method on a null-valued expression.
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull

BO XI 3.1 SP3 Install issue on Windows Server 2008 R2 64-bit

We are trying to install the lastest Build of Business Objects XI 3.1 SP3 on a new server with Windows Server 2008 R2 64-bit OS (51038908_part1.exe,51038908_part2.rar, 51038908_part3.rar).
The setup never finish! It seems that the setup can't validate the CMS installation and is trying again and again.
In the "Enterprise XI 3.1 SP3 - Windows - Supported Platforms" document, the Windows Server 2008 R2 Entreprise 64-bit Edition is supported.
The antivirus is desactivated and the setup.exe file was launched in the administrator mode.
Any ideas?
Edited by: Frederic Wojnarowski on Nov 22, 2010 5:45 PM

We have run into similar issues with that same package (51038908_part1.exe) which is a complete install of "BOE-3.1 package with SP3" for Windows 2008 Server that only installs in the 64-bit mode.
We had a 32-bit Oracle 10g client installed, that BOE did not recognize for the CMS - so the install was hanging at the CMS config...(no clear errors / no simple way to roll-back the failed install).
We only discovered the underlying Oracle issue when we deployed just the CMS with a local MySQL database - and then tried to point the CMS at the Oracle DB instead. It gave us TNS errors even though we could hit the same TNS without issue using SQL-PLUS on the same machine.
This lead us to assume that the 64-bit BOE couldn't connect via the 32-bit Oracle 10g drivers.
We have had trouble installing the 64-bit Oracle 10g client that we downloaded - so are now looking for some advice.
Anyone know which specific 64-bit Oracle 10g client should be used with the cumulative "BOE-3.1 package with SP3" 64-bit package (51038908_part1.exe)...?
I assume that this Oracle client will be used for any connection to the CMS / AUDIT Oracle databases - and any RPT content running on the CR-JobServers that is using an Oracle Native connection...?
Thanks in advance for the advice.

Download issue when Windows 7 Pro joins a Windows Server 2008 Active Directory

Hi,
I purchased 2 new Dell OptiPlex 3010 desktop computers that came with Windows 7 Professional operating system with SP1.
There were no Microsoft updates installed yet. After I added one of these Dell computers to the Windows Server 2008 Active Directory, I was not able to download several items.
Below are several examples:
1) I downloaded the Norton anti-virus installation file. This file is not the full installation of Norton; it is more of a file where you execute it and it will download the full installation from the Internet like from their Norton web
site. So when I executed this installation file, it does not download the full installation files.
It just hung at the screen saying “Downloading” and it will finally stop with an error (don’t remember the error message).
Note: If I have the full Norton installation file then I am able to install it on this computer with no problems.
2) I downloaded the Adobe Reader installation file. This file is not the full installation of Adobe Reader; it is more of a file where you execute it and it will download the full installation from the Internet like from their Adobe web
site. So when I executed this installation file, it hung at the downloading part and then it will error out with a “Actionlist Not Found” message.
Note: If I have the full Adobe Reader installation file then I am able to install it on this computer with no problems.
3) I installed Microsoft Office 2010 Standard version on this computer.
I configured Microsoft Outlook to retrieve emails from my email provider (pop and smtp settings).
After configuring Microsoft Outlook, I was able to send emails through Microsoft Outlook successfully (and very quickly), but he was unable to retrieve my emails. The progress bar for the Receiving in the "Outlook Send/Receive Progress" box
shows no progress. The Progress bar is not moving. There is a message at the bottom of Microsoft Outlook stating "Receiving message 1 of 6 (x.xx KB of x.xx MB)" and it is very slow. My new emails were not being retrieved at all.
I tried various pop and smtp servers that was available for my email provider, but all had the same effect.
4) I can access certain web sites (e.g.
www.yahoo.com, www.cnn.com) while I cannot access other web sites like
www.usatoday.com, my web hosting email site.
Note: I had a Dell computer with Windows XP Professional operating system and this computer does not have any of the above issues.
The above are only a few examples that I have experienced.
If I removed this Dell OptiPlex 3010 computer from the Windows Server 2008 Active Directory then I still experience the same issue.
So as another test, I setup the other new Dell OptiPlex 3010 with the same Windows 7 Professional OS with SP1.
This time, I did not join the Windows Server 2008 Active Directory and I was able to successfully download the full Norton installation files, download the full Adobe Reader installation files, download my emails from Microsoft Outlook 2010, etc.
But once I joined this computer to the Windows Server 2008 Active Directory then I am not able to download these files and emails at all.
It seems like there might be some group policy or a security setting that is preventing these downloads so I disabled the group policy on the Windows Server 2008 AD and Windows 7 Profession OS, but it didn’t resolve the issue.
I disabled all of the firewall programs on this Windows 7 Professional OS, but it still did not resolve the issue.
Since the Windows Server 2008 AD did not have DHCP installed, I installed DHCP and setup a scope.
Then configured the Windows 7 Professional OS to obtain an IP address, but it didn’t resolve the issue.
If I move this Windows 7 Professional computer to another network where it did not have any Active Directory; it just had a wireless router serving DHCP then everything works on the Windows 7 Pro computer.
Any ideas what is the root cause when a Windows 7 Professional computer join a Windows Server 2008 AD?
Thanks,
wl_tech

Hi,
Could you please tell some information for the AD environment and how it connect to the internet?
Regarding 3rd party installlers didn't work as expected, please also seek help in their offical website.
For outlook not receiving emails, could you please take a look in
Event Viewer and see if there are any special errors logged there?
And when trying to access the website like
www.usatoday.com, any special errors IE showed out?
Best regards
Michael Shao
TechNet Community Support

Cisco Security Manager Client running on Windows Server 2008 R2 (64 bit) in Terminal Service

Hello CSM Gurus,
Would there be any performance issues in CSM client software design if multiple instances of CSM client by multiple users ran concurrently on a Windows Server 2008 R2(64 bits) while CSM users accessing the server via Remote Desktop Services ?
In my environment, we have a CSM server at our major data center while security administrators from all over the world need to use this CSM server.
In order to overcome the latency of the CSM client due to the WAN network, the plan is to use a Windows Server 2008 R2(64bits) as a terminal server and all security administrators would need to access this terminal server via RDP and would launch CSM client on their desktop. The terminal server locates on the same LAN as the CSM server itself in order to minimize network latency in communications between the CSM clients running on the terminal server and the CSM server. there would be multiple instances of CSM clients running concurrently on the Windows Server 2008 R2, the terminal server.

Hi;
please check
Oracle Database 11g Release 1 (11.1.0.7.0) <<Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64
http://www.oracle.com/technology/software/products/database/oracle11g/111070_win64_2008soft.html
Check Database 11g Release 2 Certification Highlights [ID 1065024.1]
But please check this thread
client 11gR2 install on Win 7 Pro fails java.lang.NullPointerException
Regard
Helios
Edited by: Helios- Gunes EROL on May 14, 2010 4:49 PM

Windows Server 2008 sp2 Task Scheduler missing next run time after restart

Hi,
I have the issue that there does not appear to be a fix for with a server 2008 sp2 (NOT R2) where after a restart all tasks are missing the next run time so I need to edit each task to add this time back in. I have tried the hotfix in KB 950035
but this when you run it is only for Vista and cannot be installed despite saying it's also for Server 2008.
For some reason also this is Task Scheduler version 1 not 2 which I thought came with windows since Vista so SP2 should have it.
Anyone got any ideas?
Thanks,

Hi Evans,
Would you please let us know current situation of this issue?
As Dave mentioned, Windows Server 2008 Service Pack 2 include all the previously released updates for Windows
Server 2008.
Based on your description, I understand that all scheduled tasks still miss the next run time on your Windows
Server SP2 when the server restart. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please open Properties of one problematic scheduled task, navigate to History tab, then
check if find some relevant events or errors. Those may help us to go further analyze.
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Window Server 2008-Issue running my website on local webserver-ie issue

Similar Messages

Maybe you are looking for