Window size increase

Dear Experts,
how can i increase the window size?
Regards
Khan

you go in se71 and type your program and type language de and go in change mode and then in menu go in utilities and convert original language from de to en.
after change original language you can change the window size.
if helpful please give points
Regards
Maqsood

Similar Messages

Safari always loads small window size have to always increase size pressAA several times. How can I have it bigger by default ?

Safari always loads small window size It leaves a wide margin on both side of the window. I have to always increase size press AA several times. How can I have it bigger by default ?
Changing the font size does not work. Many Thanks

Hi Bee
This is not what I mean. I'm not a new user of computers. Even when the window fills the screen. There are wide boarders either side, have to press the AA serveral times to increase web page (in the tool bar top left) so that the web page fits the window.

The font size increases automatically and the window will not let me scroll

When I launch 3.6.12, two things happen: The font size increases by itself to the largest font available, and the scroll bar doesn't work. I can scroll down the page, but as soon as I stop, the window resets to the top of the page.
Running Win XP SP 3.

Check that you do not run Firefox in compatibility mode or with a reduced screen resolution.
Make sure that you do not run Firefox in compatibility mode.
You can check that in the "Compatibility" tab in the Properties via the right-click context menu of the Firefox desktop shortcut.
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/appcompat.mspx

Mouse gesture causes sudden increase in window size

I'm unsure where this question belongs, I have searched high and low but obviously have not struck the right combination of search terms. So if this is not the correct place please point me in the right direction.
I generally have the Safari app opened to almost fill the whole Mac screen and have 5 or 6 tabs opened ready to look at each on in some detail.
Sometime when searching the web with a few windows open, using Safari 5.1.4, Inadvertently my finger(s) brush the top of the Magic Mouse and the primary open window will zoom in [enlarge]. At least I think it is a light finger touch which causes this, unless it is a slight movement of the mouse itself. So what was visible, ordinarily normal, on a single web page is now extraordinarily expanded and only a small portion can fit and will appear on the web page. This happens when I go to attempt to drag the window up/down/sideways but I never get to that action. I have no keys pressed on the keyboard [Apple Bluetooth]. This anomaly does not increase the web page window size to fit the screen.
I have tried the CMD - (plus) keystrokes to no avail. Similarly the CNTL - scroll wheel will not bring the page back to correct [previous] size. The only solution is to CMD-W that page and reopen to normal size, in effect, start again.
I have no third party software on my Magic Mouse and I can not see any gesture to do this on the System Prefs for Mouse. I can not re-create this happening no matter what gesture I use on the Mouse and thus am unable to identfy the cause. The zoom happens so fast I can not tell where my fingers were at the time. I can find nothing relevant in Sys Prefs>Universal Access>Mouse>Mouse Options. I have Sys Prefs>Universal Access>Seeing>OFF checked. AFAIK I have no third party apps on my iMac which have any bearing on zoom. I have googled but as usual google results depend on the search terms which I seem not to be able to accurately describe.
24in iMac 8,1 6GB RAM, OS X 10.7.3.
I would appreciate any advice.

What you describe sounds like the Smart Zoom gesture for the mouse - a gentle single-finger double-tap on the mouse will zoom the contents of a Safari window. Repeat the gesture to bring it back to normal.
This can be disabled in System Preferences > Mouse > Point & Click by unchecking the Smart Zoom item.

How to increase main window size dynamically in sapscript

Hi,
I have to print all records which are available in internal table in a main window.The main window is in between two variable windows.And below two other varaible windows are there.
I want main window size to be increased as per no. of records available(max 12 records) in internal table.
If the specified size is insufficient then the variable window which is below the main window should move below to accommodate the records available in internal table.
This is very urgent requirement.
Please help me.
Regards,
Vidya

Hi Vidya,
Main Window size cannot be changed dynamically.
They are static values.
However, i hate to say this again but
if you use a table with a footer the footer of the table will move up if the number
of records are less. Sorry for not having a more positive reply.

I would like to know how to increase the window size and message font size on the the Three Button Dialog.vi

I like using the Three Button Dialog .vi. However, I am doing a job were I need to use a larger font size. I tried to adjust the core vi but could not make it do what I wanted. Any help would be great.

Jeff Bohrer wrote:
1: VI Properties Window Size- Check maintain proportions of window for different monitor resolutions. (Your users will thank you)
Jeff,
Why do you think that is a good idea? When I opened your VI on my screen, the buttons were cut off at the bottom, and there was a slight cutoff on the right side. Without scrollbars or the ability to resize the panel, (which I generally wouldn't want on a dialog box anyway) there is no way to be able to see the whole dialog.
Did your VI show all of the buttons and show all of the text box? On mine it looked like this.
What was your screen resolution and your monitor aspect ratio? Mine is 1680 x 1050 for a 16:10 ratio. I think you will have problems with checking this box. I would recommend unchecking it. Suppose you programmed on a 16:10 screen, but someone else has a 16:9, or even a 4:3. That is going to screw up the appearance of the dialog unless you take the time to resize the buttons and text inside the dialog. (And I feel checking the resize option inside the Window Appearance settings just never works right either.)
If I was the user, I'd appreciate a dialog box that wasn't cut off.
Attachments:
3ButtonDialog.PNG ‏6 KB

How can I change the default window size of a new message permanently?

The mail window opens up very small and every time I must increase the size manually. I want to be able to set it so it opens larger or at least opens to the saem size as a previous mail window, which is what Mail used to do.
Also, can anyone tell me how to stop that new mail window from opening on the bottom left of my screen? I need to move it in orde to increase the window size. So, 2 default actions that are a psin to constantly deal with.
Is there any guru out there who has had this problem and solved it? Thanks!

http://kb.mozillazine.org/Font_settings_in_Thunderbird

Set custom default window size for opening Preview?

I'm using a terminal-based text editor, and when I compile LaTeX files, I have a script to open the compiled pdf in Preview. The trouble is that Preview opens in the same default dimensions every time, which covers up other applications I have open.
It's not a huge deal, but it would be nice to have Preview open flushed right and as half the width of the screen every time. Since I'm opening and closing it so often, moving it and resizing it every time gets really annoying.
I realize this isn't a built-in option for Preview, but is there any way of doing it using Terminal or otherwise? I've googled around and haven't found any satisfactory answers yet.
Thanks!

Hi zazi,
Each window opened takes the size of the previous window opened.
Its possible to zoom in and out as well [https://support.mozilla.org/en-US/kb/font-size-and-zoom-increase-size-of-web-pages]
Also see:
[https://support.mozilla.org/en-US/kb/changes-toolbars-and-window-sizes-are-not-saved]
You can look at this extension to adjust the font size for the user interface.
Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer

Windows size / resolution when connecting via scvmm console

Hi
right... please see attached screenshot for my problem..
As you can see... the windows is the usual size, but the server VM it is displaying is not showing as it should.. something has gone wrong with the display settings..
The only resolution I've found, is to restart the server.. which isn't really an option with this server... it will cause quite a lot of problems....
What can I do to fix this?
I've tried the obvious stuff like dragging the window to increase the size etc... stuff like that..
but it must be something on the server since it fixes it self when I reboot an affected server...
Has anyone else seen this?
and what can I do to fix it :)
Kindest regards, Martin

A co-worker found this answer today:
"After a new Hyper-V VMMS certificate is generated, there are mouse and screen resolution issues when managing a virtual machine using the Hyper-V Manager Console"
http://support.microsoft.com/kb/2413735
Hope this helps!
To elaborate on the symptoms, here is what I found in addition to some of the people in this thread:
It took a while to figure out how to log in without seeing the screen while logging in.
The fact that you have to click in the scvmm window to lock the mouse in the scvmm session is a dead giveaway that it is ISC problems (and you have to press ctrl + alt + left arrow [or sometimes windows key] to release).
The mouse cursor does not show up (but is still functional). Left and right mouse movements are normal, but up and down are reversed. The mouse buttons are also reversed in function occasionally.
Once I figured this out, I was able to figure out how to open up the resolution screen and move around. I set the screen resolution own to 800x600 and now I can see the whole screen. I set it back to 1024x768 and I can see the whole screen.
But then we found the above 2413735 article and that seems to fix everything with a reboot or save state.

File sizes increase in StarOffice 8

I've got a letter I send out about once a month, just changing dates in the contents for each edition. It has a linked .jpg file as background.
In StarOffice 7 the .sxw file size is 8 Kb.
In StarOffice 8 the size has leapt to 44 Kb, whether I save it in .sxw or .odt format.
Why?

I find that file sizes increase both with text documents and with spreadsheets, sometimes by a great deal. One of the reasons I switched from 5.2 to 7 was the much smaller file sizes, since I keep my weekly back-ups on floppies (and am a stingy sort of fellow generally). But I had to run 7 and 5.2 together, since 7 does not handle Sanskrit/Hindi founts (the SO "help" team just asked a whole lot of questions and then disappeared). So now I have (on Windows) 5.2, 7 and 8. I have still not checked if 8 handles these founts. If it does, I can remove 5.2. For the rest, 8 does not seem to offer any advantage over 7 -- not counting the data base, which I have still to look into. File size, in my view, goes against it.

Pannel size not adjusting according to the window size

can anybody solve my problem
in my application in a tab i have tree pannels,
the central panel is agian divided into two pannels (left and right).
the application when loaded it shows proper layout but when maximized the space for right side pannel increased but the pannel is not compleately filled in it .
That is : right side pannel is leaving some space at its left which is looking very untidy.
please anybody suggest how to adjust the size of pannel according to window size.
abhithewizard

can anybody solve my problem
in my application in a tab i have tree pannels,
the central panel is agian divided into two pannels (left and right).
the application when loaded it shows proper layout but when maximized the space for right side pannel increased but the pannel is not compleately filled in it .
That is : right side pannel is leaving some space at its left which is looking very untidy.
please anybody suggest how to adjust the size of pannel according to window size.
abhithewizard

On a certain website the window size has become so huge I cannot use certain features and am unable to reduce the window size myself. It went huge as I was moving the cursor and I have been unable to ajust this. How do I alter screen size manually?

Sometimes when moving the cursor the window size on certain sites reduces or increases. This happens randomly and I am not able to make it happen to change the size of the screen to my choice. The window on a particular site is now so huge I am unable to use features on there as they do not come into view on my window at all. Please help me on how to control this feature or in other words how do I increase or decrease the window size manually.

See "Resizing oversize window" - MozillaZine Knowledge Base
*http://kb.mozillazine.org/Resizing_oversize_window
There are a couple of extensions tat could also be involved
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

Visual Administrator window size

How to change the window size of Visual Administrator?
It is too small and maybe I am missing some stuff in the display?
Thanks in advance
Cyrus

Did you ever find how to increase the size of the Visual Administrator window? We are having the same problem.

How to configure window sizes?

I have a new Macbook Pro and when I open new windows, especially documents or downloads, the windows are less than half screen. Can I somehow set this up, so that any window I open will always be Full screen, or do I have to manually increase the window size to full screen myself?
Thank You!

How about clicking the green button in the upper left. It should remember that default setting.
I also use RightZoom.app for better functionality across the board.

Remeber window size

How can i make Pages remember the window size. it usually comes up with a window size that doesn't fit the entire page?
Also i'd love to have the page centred (as in iWeb) while increasing the window width instead of having it fixed to the left. can i do that?
Thank you in advance for your suggestions!

Harpo Marx wrote:
How can i make Pages remember the window size. it usually comes up with a window size that doesn't fit the entire page?
Can't. I haven't figured out yet how it is working all this out. Very unMaclike.
Also i'd love to have the page centred (as in iWeb) while increasing the window width instead of having it fixed to the left. can i do that?
In a word. No.
All of these are thorns in the side of users' productivity. I have commented before on the oddly bad functionality in Pages, where superficiality and obscurely hidden features win out over getting the job done.
Still it all looks pretty for the few minutes the customer tries it out before buying.
Try:
+Menu > Pages > Provide Pages Feedback+
But I wouldn't raise my hopes.
Peter

Window size increase

Similar Messages

Maybe you are looking for