Window XP LAN IP problem

My standalone Window xp sp3 machine is running VMWARE workstation 7.0 with Red hat 5.0. as Guest O/S. On Red Hat Linux 5.0 Oracle 11g is running fine. I have configured the n/w so I am able to access guest Red Hat Linux from host window xp as The red hat has the ip address through a loopback adapter . Although I am not able to access the host from guest because window machine has no IP address. How can i assign ip address so that i can access the host from guest. OR if there is some other way round
Edited by: user5166350 on Jan 26, 2012 9:49 AM

user5166350 wrote:
My standalone Window xp sp3 machine is running VMWARE workstation 7.0 with Red hat 5.0. as Guest O/S. On Red Hat Linux 5.0 Oracle 11g is running fine. I have configured the n/w so I am able to access guest Red Hat Linux from host window xp as The red hat has the ip address through a loopback adapter . Although I am not able to access the host from guest because window machine has no IP address. How can i assign ip address so that i can access the host from guest. OR if there is some other way round
assign IP number to XP system; like 10.1.2.3

Similar Messages

HOME LAN CONNECTION PROBLEM

HOME LAN CONNECTION PROBLEM
I set up a 2 unit home net with a Linksys WRT54G Router, One PC hardwired to Port 1 and a Notebook conected via the wireless port. Both PC are Pentium and WXPPRO.
When I try to browse the local workgroup ("MICASA") I get the following error message: "You have no access to "WorkGroup". You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The server list for this workgroup is not accessible at this moment."
Wireless has MAC filter enabled and security disabled
I restricted DHCP adresses to only 2 => 192.168.1.100 and 192.168.1.101
Win XP Pro Firewall is disabled in both PC
I worked as ADMIN with proper password in both boxes. Full file security enabled.
Shared both C disks with proper local and share permits.
In registry both PCs have: HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Lsa/"restrictanonimous"=0
I could see both PCs in "my network places" for a couple of days, with full and proper file sharing, and then both pc's dissapeared. Both PC's access internet properly.
The obnoxious message listed at the beginning began appearing when I click "Workgroup" in "my network places". I tried everything, including unsetting and re-setting file sharing for C disks. Nothing happens.
The W2K Resource Kit Browser Monitor reports no brouser on the LAN.
I can ping one adress from the other and I can log onto the other box shares by typing the name in Windows Explorer (\\Pentium or \\PCdeLidia)
Any clue will be welcome

Thank you, timelord.
I checked the Node setting (ipconfig /all) and it is "broadcast".
So, I decided to start all over again.
1) I un-shared all shares in both computers (The notebook and the desktop).
2) I reset the linksys router and used the Linksys setup wizard to reconfigure it from 0 (cero) - dropped (disabled) ALL security - Left only admin setup password - Changed the workgroup SSID from "MyHome" To "Home" - just to be sure.
3) Run network setup wizard in desktop (WXP Pro). Sharing Printers and files enabled.
4) Stopped and Disabled the WXP firewall in the Desktop (it was disabled, but the network wizard enables it and leaves it running)
5) Rebooted the Desktop
6) At this point, I finally could browse the local lan and see my desktop listed
  My Network Places / All the Net / Microsoft Windows Network / "Home" / "Pentium" (my desktop)
7) Went over to the notebook and re-checked all file-sharing was off, then I erased the WI-FI profile in it (uses the Intel wizard), changed the workgroup name from "My Home" to "Home", Rebooted it and connected it to the Wi-Fi "Home" net that was detected. ALL security disabled, including WXP Firewall.
8) Now, the whole net is visible from both PC's
  My Network Places / All the Net / Microsoft Windows Network / "Home" / "Pentium" (my desktop)
  My Network Places / All the Net / Microsoft Windows Network / "Home" / "PCdeLidia" (my wife's notebook)
9) I enabled a couple of shares in both machines and I could browse them and connect to them
10) Finally, all goes to hell: I shut-off both PCs and the LinkSys router. Then I powered the linksys, and then the Desktop. The notebook still OFF. And Voilá, same awful post:
"You have no access to "WorkGroup". You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The server list for this workgroup is not accessible at this moment."
I'm not even able to see myself.
One tip: I used the browser monitor from W2K. Before, I was able to see 3 (three) lines listed, no browser. Unfortunately, i did not write it down. Now I can see only the following 2 (two) lines:
MiCasa \Device\NetBT_TCPIP_ {€ unknown (Not an Euro sign, something like that)
MiCasa \Device\NwlnkNb         unknown
Now I have to quit, no more time, I'll continue later and keep you posted
Thank you again

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

Just purchased and installed photoshop and everytime i try to open it it says "windows has encountered a problem and must close the program" anyone else have this problem?

I have just purchased the photography package on my windows 8 computer and everytime I open photoshop an error message pops up saying that windows has encountered a problem and needs to close the program. I am really frustrated that this is happening after I purchased this plan and would like to be able to use the product I have purchased

+1 to Chris' assessment.
Keep in mind that it's your responsibility to provide a problem-free working environment on your computer for Photoshop, and system software (such as display drivers) can have problems.
Look in your Windows Event Logs (specifically, your Application Log) for the info requested above on the specific crashes.
-Noel

Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

More info,
I have bootcamp with Windows 7 installed, do I need to run some "Driver compatibility checker" after the Windows 7install?
if so what is the name of it?
thanks

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Itunes keeps closing as soon as i open it and states 'windows has detected a problem' HELP!!!!

Help!! Itunes keeps closing straight away and message states 'windows has detected a problem' HELP ASAP PLEASE!!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Will Developer 6i run on Windows 7 without any problems?

Will Developer 6i run on Windows 7 without any problems? and developer 6i supports on windows 7 or not.

Hi,
As a matter of fact the Dev 6i tools (form and report builder) is supported and will be supported as they are certified with E-business 11.5.x.x. version....product
Take a look at :
"Which Version Of Dev 6i Tools (Reports & Forms Builder) Is Supported With E-Business Suite 11.5" (Metalink Note:418667.1)
Greetings,
Sim

Cannot email pdf using Acrobat Reader XI v11.0.3 in Windows 8. No problem when using in ms vista. ge

Cannot email pdf using Acrobat Reader XI v11.0.3 in Windows 8. No problem when using in ms vista. get "authentication error". Sometimes will get a very quick dialogue box showing the gmail login screen but then disappears. I use firefox and IE

Hi Rodney
Welcome to Apple Discussions
This sounds like one of those "oddities", contributed to by a few sources.
I can clear the Safari cache files as a temporary solution, but I encounter the same difficulties with the “problematic” files once they have been opened again.
Wondering if you disabled the Safari Cache would the refresh function work correctly? As a test you can disable the Safari Cache by Emptying the Cache first via the Safari menu, then Quit Safari. Now go to the Finder>Your User Library>Caches>Safari. Single click on the Safari folder, then Apple Key + I to open Info panel. There, check the "locked" box. This prevents further additions to the cache. The downside, you lose your ability to upload images etc. within Safari (my cache is disabled, so I use Firefox for the uploads).
Then restart Safari. Try the PDF from within Safari.
Post back

MacBook pro when windows 7 has startup problem and Mac os doesn't work

I installed windows 7 on my MacBook pro and it did work well. But now windows has a startup problem and "startup repair" couldn't solve it, so I can't use both Mac os and windows and my laptop has become completely useless. Any suggestion?

Reboot and hold down command-R at the sound of the chime, that should take you to the Lion recovery partition, if it does go to disk utility and see if you have an OSX partition at all.

Windows cannot find (null) problem - firefox wont start? help!

ive just got a 'windows cannot find (null)' problem when staritng Firefox; being using it for years no problem but cannot open it now. tried removing and reinstalling, still get the message.
any ideas what I can do??
== This happened ==
Every time Firefox opened
== 20 June 2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB0.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Yesterday after posting my problem I consulted a computer programmer. He advised me to follow the pathway C:\\users|richard\....... from Explorer to the extension and delete it. Worst case scenario would be to uninstall and reinstall Firefox. I deleted it and the unresponsive script and warning disappeared without any other complications.

Product: HP Pavillion dv5 Operating System: Windows 7 64-bit Problem: Smart Hard Disk Error

Product: HP Pavillion dv5
Operating System: Windows 7 64-bit
Problem: Smart Hard Disk Error
Disk Name: WDC WD3200BEKT-60V5T1
How do I fix this error?

Hi,
If you're starting to get Smart warnings, it's probably best to think about replacing the Hard Drive - at the very least, make sure you have a current back-up of all your personal files etc in case the drive fails suddenly.
If you'd like a guide on replacing the Hard Drive, please post back with the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows 7 64bit Photostream Problem

Hi,
I have installed the windows iCloud Control Panel, all installed OK.
When I open the control panel it says
applephotostream.exe has stopped working
It will then not allow men to set up the photo stream.
I guess it is either an X64 problem or conflicting with something, I've installed it about 4 times no....
Can anybody help????

I too have this problem. Windows displays th following problem details:
Problem signature:
Problem Event Name:          BEX
Application Name:          ApplePhotoStreams.exe
Application Version:          7.1.75.5
Application Timestamp:          4eb0a8dc
Fault Module Name:          MSVCR80.dll
Fault Module Version:          8.0.50727.6195
Fault Module Timestamp:          4dcddbf3
Exception Offset:          000267ac
Exception Code:          c000000d
Exception Data:          00000000
OS Version:          6.1.7600.2.0.0.256.48
Locale ID:          1053
Additional Information 1:          2e88
Additional Information 2:          2e88e4e14ecd6a84a26aa264030e8d02
Additional Information 3:          13fb
Additional Information 4:          13fba8a7e93b7fcee23a8c94da19e096
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Please help Apple! I thought your software was reliable...

Microsoft Excel for Windows has encountered a problem and needs to close. W

i have the attached problem anytime i tried to open a BW query in excel:Microsoft Excel for Windows has encountered a problem and needs to close. We are sorry for the inconvenience", Please inform if there is a work arround, i have re-install excel , likewise SAP many times but nothing

Hi,
I would suggest you check with any other colleague if they are able to run the same or not. Running BEx report depends hugely on the front end capacity and performance. Please check if anyone else can run the same report, with the same front end RAM, then it might be the problem with your installation.
Also you can try with the latest patch for GUI s/w.
Regards,
Debasis.

Windows has encountered a problem communicating with a device connected to my computer

I have an HP Pavilion dv6 notebook; Product # WF536AV, running Win 7-Home. Without warning, when trying to boot one day I got the following error message:
Windows has encountered a problem communicating with a device connected to your computer. May be caused by unplugging removable storage while in use or a faulty hhd or CD drive. An unexpected I/O error. Error Code oxcoooooe9.
I have a 500GB WDC hhd that seems to run hot.
Cannot get into F8 Advanced Options, although I can get into BIOS (F9 & F10)
Ran the Win 7 Recovery Disks twice. No help. Same message
I can run Linux Ubuntu in memory (not installed). GParted shows the following:
Partition size used unused label flag file system
Sda1 76GB 14GB 61GB NTFS
sda2 400MB 300MB 100MB SDV Boot lba FAT32
unallocated 390GB
6. No access to Recovery Manager
7. F2: memory test passed but hhd test would not run
8. In Ubuntu Disk Manager, report said drive had 'a few bad sectors', but hhd test would not run "Self Test- Failed (Read)
9) Ran MBR repair disk and System Rescue disk; no luck
10) In Ubuntu, when I look at the Windows file system, In 82 GB partition there is an 'RM' folder with an "Image" folder with 16 files. In the SDV partition is the bootmgr folder and several others
a) why cannot I boot to Windows off the hhd?
b) what does SDV label mean (secure digital video; silicon data valu;tr; static driver verifer from Windows)?
c) is the hhd simply failing. I do not have an extra to swap out and try
d) may the Win 7 Recovery disks bad, perhaps, and should I then download a Win 7 ISO file and try that?
Thanks for any help. This is highly frustrating. I have already spent about 8 hours on this!

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

Window XP LAN IP problem

Similar Messages

Maybe you are looking for