Window7 64-bit not loading past sunray screen

i have a hp pavilion p6-2112b that has stopped fully loadind windows. i get the hp hand then a bar that tells me its loading files(that never happened before today) to the starting windows screen. after all that i go to a "sunray" screen that quickly flashes two bios windows and then nothing. no menu, no icons, nada. right now i have managed to get it to run a "startup repair" but it seems to be taking to long. it says this may take several minutes but its been hanging in an Attempting repairs state for about an hour and a half. any suggestions? could use some help

Hello Beth6871,
Your computer will not load windows.
Do a hard reset.
Turn the computer off.
Remove the power cable and the battery.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
This will test all the hardware in the system and detect any problems.
Let me know how everything goes
Have a good day.

Similar Messages

Re: PC will not load past splash screen.

Re: PC will not load past splash screen.Pavillion p7-1235, win 7 home. Cannot get to bios, or safe mode.
loaded Linux Mint on a new hard drive. went back to win 7 and problem started. thanks for any help

Hi snakeman:
I regret that you are still having issues. I am sending links to documents that I hope will assist you Windows 7 Does Not Start click here ,Troubleshooting System Recovery Problems (Windows 7) click here. and Testing for Hardware Problems Using Hardware Diagnostic Tools (Windows 7) click here.
I hope you find these useful.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Macbook not loading past white screen. DU not finding HDD, works externaly

Hello,
My Macbook stopped working recently, it crashed, so I held down power button for it to turn on again.
I did this the next morning and it just would not load past the white screen, I tried turning off and on again with no joy.
I had the circle with a line through it at one point. I tried safe mode and reseting whist holding cmd S, then option cmd P R.
I loaded with the disk in and Disk utility could not find the disk.
I plugged the HDD into a USB adapter and the HDD works fine, I am using it to write this.
What would stop the mac from loading the HDD and cause Disk utility to not find the disk?
Macbook Pro 13.3" 2009. I recently put in 8GB RAM to replace the 4GB. Using Lion since it came out.
Any help guys?
Sorry if this problem has been posted else where already.

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

HP Pavilion Slimline s3707c does not load past hp screen

loads to hp screen, gives the following choices:
<F10=setup> <F11=System Recovery
<Esc=Boot Menu> <F9=Diagnostics>
if i choose setup or boot menu it tries to load but does not. the other two do not give me a message.
i tried to load bios screen by using every "f" key, one at a time, each on their own. i even tried del and esc. none loaded bios, just brought me to the hp screen where it never loads.
i made a copy of windows vista recovery disc and tried to boot from it. same issues as before, nothing loads. i opened the case and the processor cooler was very hot to the touch. i used a box fan to see if i could keep it cool but nothing worked. im guessing the processor shifted or is just getting to hot? perhaps i need a new fan?
some things i tried:
ubuntu 10.10 install cd does not read.
windows xp w/sp2 install cd does not read.
vista recovery cd does not read.
so cd's dont read lol
shut off for couple hours to cool off processor and used a box fan to give more cool air through the heat sync. same problem as before.
any ideas? i was told to check the ram one at a time but i dont have the time to pull the heat sync off, then the disc drive to unplug one ram stick.

I had this exact problem after moving my mother-in-law's computer to a new location.
Computer wouldn't get past start up screen. After opening the computer, checking all connectors, etc., I finally bought recovery discs, installed a new hard drive, and............ nothing. Still wouldn't get past start up screen.
THEN I FOUND THE PROBLEM.
On the front of the computer, there is a connector with two USB inputs separated by a chrome strip. In transit, the center strip had been dislocated, and was shorting out one of the USB jacks.
When I realigned the strip so the USB jacks so weren't shorted, the PC started normally. I put the original Hard drive back in, and everything was back to normal.

Dell 1750 Windows 7 Will Not Load Past Splash Screen.

I have a dell 1750 laptop that I just replaced the hard drive with a new exact same hard drive that was in there I went to reinstall windows from the recovery disk and it never gets past the 7 logo I never even get to the option of installing the OS. I
tried a Vista Disk does the same thing. I tried an XP disk and does the same thing. I did a bios update and put the hard drive in compatibility mode same issue on all 3 Operating Systems. I ran the dell diagnostic that come with the computer and everything
tests fine. I tried to load all 3 OS off a jump drive and same issue. I ran hardware diagnostics off the Ultimate Boot Disk all hardware comes back fine. Can someone please help me with this? Thanks.
lipanitech | http://www.allamericancomputerrepair.com | A+,Network+,Linux+,Security+,MCTS,HP Pro

Hi,
For your situation, I would like to confirm the following questions:
In my understanding, you replace the hard drive, so you must perform the clean install, right?
Do you have chance to format the disk?
You may need double check if you set the CD boot as the first priority in boot sequence.
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Macbook not loading past white screen with logo and spinnning wheel?

ok, so basically i have a macbook 10.6.4 Snow Lepoard that is making me want to literally bash its brains out but, unfortunatly i cant because it is owened by the school...
As mentioned in previous posts, my school It dept are incredibly slow and their idea of fixing something is to wipe everthing and reinstall all the programs once again. if that dosent work their other way of fixing something is to send it off to apple. for obveous reasons i want to avoid that.
it ONLY started today, (last night i was happily doing last minuite homework) when its was lagging so much that i did the inevitable, i quit tetris and restarted my computer...
This led to me sitting infront of a white screen and a spinning wheel for the whole lesson. The next lesson i got fed up with waiting and restarted. nothing. I have also notied that my macbook seems to heat up REALLY FAST toward the bottom of the screen (where is says macbook).
Any suggestions?
Thanks in advance,
Favvi

well i went to hand it in today but the fails that we call 'the qualified IT deptarment' (even though they are only two), decided to take the day off. they were supposed to be there recess and lunch but the room was pitch black.
When you say that "you do not need admin rights to perform the different solution", i actually am the admin of the laptop but there is another hidden admin so that they can change any settings in the computer without our passwords.
i have previously tried that whole command letter thing for various other things such as safe mode and starting from the disk and have had no sucess. i dont know if my timing is off or something but it never works. however, i have been able to retrive a disk from the disk drive by pressing the mouse button when it turns on.
this is an exerpt from a previous post:
favvi wrote:
so im really starting to get annoyed now. I have tried that single user mode start up thing (command + s) after the chime, before the chime, hold it down for a second, hold it down forever BUT IT ALWAYS JUST GOES INTO MY LOGIN SCREEN!!! i cant seem to get around this. I cant get into the 'utilities' from my install disk because it asks for an admin name and password. i am literally tearing my hair out…
Barney-15E:
That doesn't make any sense. When it boots to the install disk, there is no user to authenticate.
Does it have an Open Firmware password set?
i assumed that this was set. but to be honest i have no freaking idea.
also i was talking to a friend today and she said that she had the same issue and they had to replace the battery. although i have no idead on how the battery could be affecting this?

My Macbook will not load past grey screen with progress bar?

When I start up my computer the grey screen with the Apple and spinning wheel appear, then underneath a progress bar. once the progress bar is full it shuts down? Help!

Welcome to the Apple Support Communities
That bar appears when OS X checks your hard drive, and it's not a good sign that your Mac turns off, because the hard drive is damaged.
Unfortunately, the only thing you can do is to take the Mac to an Apple Store or AASP to get the hard drive repaired. If you didn't make a backup, try DiskWarrior to recover data, and buy an external disk to make backups. All hard drives fail, but we don't know when they are going to fail

Windows XP, will not load past blue error screen

Hi, been wondering for a while if anyone can help me...
My xp system will not load past the blue error screen which appears after the computer has shut down suddenly or improperly.
Regardless of what actions you choose to take (safe mode, most recent settings...etc) the system simply goes past the blue screen, onto the windows logo loading page, where the loading bar moves for around 10 seconds, before returning back to the blue loading page.
So far I have tried leaving the computer for as long as a month unused whilst I was abroad, removing the battery for various amounts of time, and leaving the computer running for as long as a day.
In the absence of a recovery disk, I have no idea how to get it back to form, and would welcome any hints or suggests, bearing in mind I am no computing genius (If you had'nt guessed). Preferably, without loosing my irreplacable pictures and videos stored on the hard drive, however that is only preferably,
Thanks, Jay

Hi Jay,
i know what it's like to not able to boot even into safe mode command prompt.
In your case I would do either of below:
Download a bootable CD ISO called "HDD Regenerator" or [Hiren's BootCD|www.hiren.info/pages/bootcd] which includes many other great tools. Burn the ISO image onto CDR.
1. Use the HDD Regenerator to boot the PC and use it to scan the whole HardDrive from 0, it will scan and fix all the bad sectors which may cause Windows failing to boot as systems files are corrupted. You will be suprise how great this tool can fix bad sector HDs.
2. If above does not work, the the Hiren's BootCD to boot the PC, navigate to Symantec Norton Ghost or Acronis True Image to Clone you hard drive, you can use USB external harddrives.
Then you can rebuild the PC with second partition large enough to store the HardDisk-IMAGE, use Ghost Explorer/etc to restore your personal files.
I have been dealing with lots of this issues as well. Let me know if you need more help.
Good luck!
Patrick

Satellite L500 will not load past the 'welcome' screen

Hi,
My Toshiba Satellite L500 laptop will not load past the 'welcome' screen. The cursor thing just keeps going around and around but won't go to my desktop.
Last night it went into some temporary profile and it had a message saying 'your other profile cannot load at this time please try again later'
Any help would be greatly appreciated.
Thanks,
Kara

The error message is not known to me and also searching in google didnt get any hints.
Possibly your Windows OS is muddled up.
Did you try to boot Win 7 in safe mode?
Try this. Restart your notebook, tap the F8 key.
In advanced boot options choose the option called Safe Mode.
If the notebook does not allow booting in Safe Mode, try the option Last Good Known Configuration.
If this didnt help, try Repair my Computer. Here you can choose between different settings.
The one which could solve this is HDD recovery which helps you to set the notebook to factory settings. But this means also that your HDD would be formatted!
So be aware of this!

Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it?

Ipod touch wont load past apple screen. I have tried resetting by holding home button and on/off but after it resets it still only loads to the apple screen. When I plug the device in It stays on the apple screen and itunes does not recognize it? I fear it may be stuck in some sort of reset loop which is stopping itunes from recognizing it. How do I go about the process of sending it in to apple if I cannot find a fix? Thank you in advance, it is greatly appreciated!!

- See if placing the iPod in Recovery mode will allow a restore.
- If not successful and you can't turn the iPod fully off (that is required to place in recovery mode), then let the battery fully drain. After charging for at least an hour try the reset, restore again
- Then time for an appointment at the Genius Bar of an Apples store.

My MacBook pro will not load past the grey screen with the spinning wheel. What do I do?

My MacBook will not load past the grey screen with the spinning wheel of death. Anyone have any solutions?

Invoke Safe Mode by holding down the shift Key as you restart. This will do a Disk Utility "Repair Disk" as it starts up (so it takes a few minutes longer) and then load with minimal extensions loaded, and request your login username and password, even if you normally do not use them to log in.
Safe Mode runs the screen using simple, unaccelerated commands. Most things are available in Safe Mode, but things that rely on extensions will not be.
Acomputer that works in Safe Mode, but fails again after you restart, often implicates your extensions and add-ons.

After Effects CS6 will no longer load past Splash Screen

Recently been using AE CS6 more frequently. Used it today for about 3-4 hours. Restarted my computer when it started to get slow to free up space from temp/cache files. Now AE does not load past the splash screen when I want to open it. Pauses for a while, then either I get a generic "program has stopped working/responding", or occasionally something else. I have allocated 26 mb of my RAM to Adobe use (only After Effects was open). Media cache files are set to 50 Gb. The program is installed on my 120 Gb SSD, which is out of space. However, all the reference files and media caches are set to go to my HDD, which has 1.5 TerraB's available. Photoshop opens fine and run fines still.
When attempting to open, Sometimes it mentions that the Dynamic Link had an error or was the last thing that was trying to load. Have restarted computer, no change. Please Help, have two projects going that need to be done very soon.
Running Windows 7 Ultimate, AE CS6 through the Master Suite. 32 Gb Ram, Intel i7 processor, EVGA GTX570 Graphic Card. There havent been any updates for anything in a few weeks that I'm aware of.
Really don't want to go through a re-installation...It was working just fine for months, then this.

Manually flushed, reinstalled graphics driver (was a slight update, a few sub sections), and all other drivers in DMan are good to go. Also uninstalled Quicktime and did a fresh install of that too. Still no good. The exact error message is this:
After Effects error: Crash in progress. Last logged message was <6032>
<DynamicLink><5> C:\Program Files (x86)\Common Files\Adobe\dynamiclink\CS6\dynamiclinkmanager.exe
Also, checked firewall settings - nothing shows up as blocked, although I could be not looking at it right. Running McAfee OAS.

My phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

my phone will not load past the apple icon when trying to turn on. all it has on the screan is apple icon and a blank status bar. whats wrong? and what can i do?

Hi, Just put phone in the recovery mode and restore to the factory settings. It should work.

Intel iMac will not boot past gray screen

Intel iMac will not boot past gray screen
my system:
new (month old) 24" intel imac, 2.8 ghz, 4 gb ram.
running: leopard (upgraded from tiger, which was pre-installed at purchase), installed 10.5.1 update right before this huge problem occurred.
install discs on-hand: two-disc tiget set, single leopard upgrade disc.
what led to this:
i wanted to install windows using bootcamp on a 50 gb partition.
at this point i was running leopard 10.5
i followed all bootcamp instructions, printing out the guide, as well. once i got into the windows setup, i was prompted to choose a partition to install windows. unlike the bootcamp guide, which showed three partitions, one clearly labeled "bootcamp", i saw only one partition. not wanting to risk writing over my mac partition, i quit the setup and rebooted the mac os. after some googling around, i looked for firmware updates (didn't need any), and then software updates. i decided to try updating to 10.5.1.
i then ran through boot camp again, deleting my previous windows partition, creating a new one, and moving forward as before. once again, i was only shown one partition to choose from in the windows setup. i exited the setup again to reboot through the mac os, but this time, i was only given a blank gray screen.
here's what i have tried so far:
booting from a CD, holding down the C or D keys: no response (in fact, i have to restart the computer holding down the mouse button to be able to eject the CD)
booting with option key held down: gray screen
booting with option key held down with external bootable firewire drive attached: the firewire drive appears as a boot icon, and i can click on it within a five second window, but then the screen freezes after that time period, and nothing changes
booting into target mode while attached to another mac: gray screen (no firewire icon, and drive never shows up on other mac)
resetting NVRAM: i'm able to hear the boot chimes, but no difference in performance. gray screen every time
Safe boot: nothing but a gray screen
Verbose mode: gray screen
Single user mode: gray screen
Single user mode with firewire drive attached: occasionally (not every time), i am able to get the white on black terminal to show up. from here, i'm able to run fsck, but it appears to only be checking the firewire drive. i have tried several times to boot from here, and once it took me to a blue screen with movable arrow cursor, but it never went beyond this.
is there anything else left to try before taking it to apple?
any help would be greatly appreciated.
thanks,
Casey Burns
Casey Burns Illustration and Design
http://CaseyBurns.com

I'd call Apple support at this point. You'll need
to put this issue on the record.
Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273)
The wait may be long for an agent to come on the line
so expect that and have some other stuff to do in the meantime.
If you have the applecare protection plan, I'd ask about "onsite"
service.
I like your work ! Good luck !
Slim
Message was edited by: slimpikkunz

IMac Does not boot past Gray Screen

iMac does not boot past Gray Screen. 2008 24" Intel iMac running Mountain Lion with 1TB hard drive.
Problem started yesterday while I was web surfing, and my iMac frooze and shutdown. I rebooted and could only get as far as the gray screen.
On bootup the following things happen:
Startup tone
Gray screen with Apple, and gear spins below Apple.
Once the gear stops spinning, nothing happends.
Troubleshooting steps I have tried:
removed all devices connected to iMac and rebooted, but same symptons occur.
booted into Safe mode and run disk utilites.
     Disk Utilities found no errors on the drive, but did find two permission issues that it was able to fix.
          First permission issue:
                   "Group differs on library; Should be 0; group is 80"
          Second permission issue:
                    "Permissons differ on library; Should be drwxr-xr-x; They are drwxrwxr-t"
Disk Utilities says it fixes these issues and then I reboot, but get the same problem.
I reboot back into Safe Mode and run Disk Utilities and it discovers the same problems listed above with Permissions. It says it fixes them, I reboot, but the same problem occurs. Its as if we are stuck in some sort of loop process.
Booted into Single User Mode and ran the following command:
     /SBin/fsck -fy   it reports back, Volume Apprears to be ok.
I reboot, same issue !
Performed SMC Reset, Rebooted, same issue
Performed PRAM Reset, Rebooted, same issue.
Booted into Recovery Partitioin (Command R) and ran disk utilities. It found the same permission issues listed above. It fixed them. I rebooted. Same problem still.
While in safe mode, I preformed a full time machine backup.
I am out of ideas. Any help would be greatly appreciated.

Hello,
I reboot back into Safe Mode and run Disk Utilities and it discovers the same problems listed above with Permissions.
You can ignore repeated "fixes" it's not really a problem, if it says completed repairs that's all that's needed.
Luckily it boots in Safe Mode, here's basically the steps to try to find out what it is...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Though I'm suspecting some corruption to your OS at the moment.

Window7 64-bit not loading past sunray screen

Similar Messages

Maybe you are looking for