Windowed CLOCK does not update correctly

My floating desktop clock [digital with date] is one hour earlier than it should be and will not update correctly on startup. The time shown is correct if I switch to the menubar version, as is the time in the time update slot on the Time & Date tab in Preferences. But the analog clock below the time update slot shows one hour earlier also. Am not sure how long this has been a problem since I haven't traveled to a different timezone in two months. At this stage in the lifecycle of Tiger, these kinds of petty annoyances should NOT be occurring as new issues.
14" iBook G4 Mac OS X (10.4.6) 768-Mb RAM

klimew,
Welcome to Apple Discussions.
Go to System Preferences>International>Formats>Times
and explore the Customize...features.
Since you are new to Apple Discussions, you may not
have noticed that there is a Tiger Forum. If my
suggestion is unproductive, you may want to repost
your question in the Tiger Forums: Finder, Dock & Dashboard.
;~)
Thanks for the info but the answer does not lie in International. It's a bug in my clock and apparently only for EDT for some cities, like New York NY (my closest city for the summer). When I switch to Ottawa Canada IN THE SAME TIME ZONE everything is OK. Weirdski.
14" iBook G4 Mac OS X (10.4.6) 768-Mb RAM

Similar Messages

Apple Mail read status does not update correctly

I have one iMac running Mavericks and using Apple Mail to run three IMAP accounts provided by a local Apple Mountain Lion Server.
It exhibits two issues:
Firstly it fails to refresh the view automatically in the message viewer window.
The header at the very top of the window will update live when a new message comes in so that it says "X Messages (Y Unread)" with the correct numbers. The list of messages does not update unless you switch mailboxes, then switch back again. Then they appear instantly.
The second and more critical issue is that the read and unread status of messages is not updating correctly at all. Refreshing the view make no difference. Two of the three accounts are shared with 6 other iMacs running Mountain Lion and Snow Leopard. None of these have an issue.
I have deleted and re-added the accounts several times, I have tried a completely clean new user account. Sometimes the first issue goes away but it returns after a short time.
The next step would be to erase the whole Mac but I am reluctant to go to the hassle as I have a suspicion that this will not make a difference and that there is a glitch with Mail on Mavericks. I have run all updates.

Hi Brenn,
To narrow down the issue, we need more investigation:
1.Does the issue occurs only in Category view? Please check if user 1 set the view to Date and email read status update.
2.Does the issue occurs to user1's own mailbox with the same setting as shared mailbox?
3.If the shared mailbox is in cached mode, please check Account Settings > Change > More Settings... > Adwanced > Use Cached Exchange mode > check Download shared folders.
4.Please switch to online mode for shared mailbox and test the issue.
Regards,
Rebecca Tu
TechNet Community Support

Login Window: Screen does not refresh correctly after waking 10.7.2 iMac and MacBook.

I have a client who brought to my attention that when we wakes his iMac and MacBook after the screen dims or sleeps at login screen, that sometimes the screen does not refresh correctly and you must use the cursor to basically "clear the screen." I have witnessed this myself and elimiated all third party products and this still happens. I am starting to believe that is is a bug in 10.7.2. Has anyone witnessed this or have any suggestions on how to remedy? Thank you.

Thanks lynque. It turns out I did need a keychain repair, but that didn't fix the problem. I probably should have done this earlier, but I ended up unplugging all peripherals (2 firewire + 3 USB) then powered up without issue.
So I shut down, plugged in one at a time, and ran into the problem again after plugging in an external hard drive (WD My Book Essential). I repaired with disk utility, but the problem remained.
I then rebuilt the partitions with Disk Warrior, and now everything seems to work....

Windows disc does not update after resizing boot camp partition

When I bought my iMac, it came with a 500 GB HDD. I used bootcamp to make a 200GB windows partition and a 300GB Mac partition. The other day I bought a 250GB SSD, and moved everything from my 300GB Mac partition onto the SSD.
My plan was to use the whole 500GB HDD for windows. So, I deleted the 300GB Mac partition and made it free space on the drive. I then expanded the boot camp partition to take up the whole drive using Mini Tool on windows 7.
Now, windows 7 shows that my drive is 465GB, but when I boot into mac, the bootcamp hard drive still reads 200GB and 300GB are "free space" even though I expanded the drive using Mini Tool.
I tried to fix this by filling up the hard drive with an extra 120 GB so it exceeded the 200GB limit that windows shows. But when I booted back into OSX to see if it had worked, none of the files were showing up in the drive, making me believe that boot camp and OS X are not reading changes I am making to the bootcamp drive when I use Windows.
How can I change this so Disk Utility shows the full size of the disc, like Mini Tool does?
I will try to upload screenshots soon.

Re-sizing Windows partitions is not supported on Bootcamp. It requires a clean install. The other option is using Winclone.
Boot Camp 5.1: Frequently asked questions
How can a Windows partition be resized after Windows is installed?
You need to delete the Windows partition using the Boot Camp Assistant, and start over to change the size of the Windows partition. Back up your important Windows files first.

LR3.2 Filmstrip does not update correctly for new imported images

Installed 3.2 last week and today I did my first import.
I downloaded from camera into a subfolder my photo folder as usually and then run synchronize on the photo folder in order for the images to appear in LR.
After that everything looks as it used to but...
However, when I scroll the filmstrip new thumbnails that enters into view does not have images, they are just grey.
If i stop scrolling they vill update and show the images.
It's however totally annoying because I can forget about scrolling to the images i want to take a look at because I don't know where they are.
I have to guess and wait for the update.
If I go back to images that I looked at before then the thumbnails are still there so once they been updated they stays so.

So far I have made no changes to import settings and today I made two new imports.
The first from card reader into my import folder.
Then I selected my import folder in LR3,2 and run synchronize and all worked fine as it allways has done before.
The second batch, captured using tethered capture onto my laptop, then transferred to an USB drive and then finally transferred to my import folder on my main computer.
Then i run syncronize again
This time I did not get the thumbnails as in my problem description.
So something differ.
Could it be that when the images was captured using tethered capture and the thumbnail was created etc on the laptop.
It also put some metadata into the raw file that makes LR3 belive that a thumbnail already has been created for the file or something like that.
Could that bee the reason to my problem?

Change Menu in Photoshop does not update correctly in Encore CS4

Hi there,
I've read some threads that there seems to be a problem with saving/updating psd menus in encore that have been changed/edited in photoshop. I heard three saves was the magic number.
Well, I've saved over a dozen times, and I can't seem to get the change to come through to encore. to make it even more confusing, some of the changes leak through, but not all of them.
I have this Chapter's menu and I wanted to edit the highlight of a selected chapter - and so I changed it to a red bar with a outer glow in fx in PS.
This is what it looks like in PS.
I go into encore - saved probably a dozen times, (and yes, with small changes like showing/hiding layers to actually save) and waited for over an hour to come through, and when I go to Encore it did ask me if I wanted to overwrite the file from PS - and clicked yes.
Well, I go under the preview in encore to preview the DVD and this is what it looks like:
That shows up blue now but with no Outer glow on it. The weird thing is that one of the chapters (2nd to right one in the bottom) - that one has turned red, but doesn't show the glow either - just shows up like the one that shows blue on top except that it's red.
What am I doing wrong?

Stan,
I do not do a Save As - I always hit ctrl + S to save it.
If I do it incorrectly, then how else should I be doing it?
Giorgio,
"I just would add that sometimes I see some little "discrepancies" between the files created in Photoshop and what I see in Encore, but this is just an Encore PREVIEW matter, nothing else."
I thought of that too and so I built to a DVD folder on my computer and it was the same way there - as far as the color of the highlights go.
What I did was double click on the layer thumbnail to bring up the 'Pick a solid color' box, and then the sliders on the right, I moved them all the way to the top, and then click on the top right hand corner, but not all the way in the corner, just in the general top right hand side. I wasn't so particular that I had each color code exactly the same because it was close enough for me to just have it up there in that side - you can't really tell the difference in the colors at that point anyway - at least not without holding them side by side.
Last night I double checked that everything was saved (Ctrl S) and then I shut everything down, including the computer, and this morning when I fired it up again - opened EN first with the project, right click 'edit menu in PS' and now in PS I see that it still has all those bars red (but don't show that way in the Preview in EN) but all the outer glow fx were disabled....
Now I'm still not quite sure what was meant by this: "Have the highlights you created the same color?
If not, you had to use (=1) (=2) (=3) keys before the layer name to display different colors in Photoshop application."
I understand you to mean the filename "(=1) highlight" numbers would have to be changed, right? Why is that? How come I can't just go into PS and set the color as I want - even if they are all different?
Ok, I just went into PS and went through all the highlights and copy&paste the color # code to make sure they were all exactly the same on each one, then I also went into the glow fx on each one and did a copy&paste there (slightly diff color then the thumbnail one) to make sure they were all the same as well.
Save 3 times - go into EN and no warning message, but a blink which I took meant it updated, and then I went into Preview, and there you have it - they were all red!
BUT there was no glow to them.
I went back into PS and on each one, all the fx were disabled.
Why does it do that?
How can I get fx to carry through into Encore?
Please excuse my ignorance, I'm expecting to learn a lot!
Thanks everyone!

Home page does not update correctly

Can anyone help me? I have searched this forum and tried suggestions from the support site, but nothing has helped. Here is my problem:
I am using iWeb '08 and posting to MobileMe. I add entries and/or make changes to existing pages and then publish them. When I check my site, my home page is an old one. I can navigate to my updated pages and then when I return to my home page it is correct.
Any ideas on how to fix this for my computer and anyone else looking at my site?
Thanks.

Empty the cache in your browser. The old pages are on your drive, and you need to have an empty cache folder so that your browser will download new copies of your pages.
Which browser are you using?

IPhoto main view window does not update

I have a problem with the recent version of iPhoto 9.3 (650.39). Sometimes, if I return from a full view of an image, and then try to go to a different folder, album or anything, the main window view does not update. If I resize iPhoto, the main window stays the same.
I need to restart iPhoto to fix this problem. My Mac is a 2011 iMac with the latest Version of OS X 10.7.4
Anyone has a similar problem?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
If it does work in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My CS6 Production suite does not update from the help menu? The appilcation Manager says: "The updat

My CS6 Production suite for Windows 8 does not update from the help menu? The appilcation Manager says: "The update server is not respondiing, the server might be offline temporarily..." I have registered correctly. I have turned off my AVG virus protection and tried to update my software, still the Application Manager gives the same response. When I login, I can see that my serial numbers are there, so it must have registered correctly.
Help!

If you don't want to download the updates manually, then you need to update your Application Manager. The relevant links are here:
Windows
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Hope this helps.

Sale Quotation Formatted Search displays correctly but does not update OQUT

I have a formatted search, intended to show a deposit amount of 50% for the document total, and refresh whenever the doc total changes. It displays correctly on the Quote header screen UDF area, but OQUT does not update. Pressing Shift-F2 returns 'internal error'. The first time the Quote is entered the right value gets in OQUT, but never gets updated after that.
The UDF is OQUT.U_Deposit. The formatted search query is:
Select ($[$33.88.number]*.05) and it is set to refresh reglaurly when Document Total changes.
Thanks for helping to figure this out

Which field are you referring by
$[$33.88.0]
The screen variable for
Document Total $[$29.0.Number]
Total Before Discount $[$22.0.Number]
Also I notice for 50% you have used .05 which is actually 5%
Try this query
SELECT ($[$-29.0.Number]*0.5)
The minus is needed since it is a UDF on the header which is a seperate window.

My firefox beta 12 using Linux platform does not update to firefox RC1 via the "check for update" function. I know windows' beta version had this fixed, when would Linux get similar support ?

Current platform : Linux
Current firefox version : Firefox 4 beta 12
Issue : does not update to RC 1 using the check for update feature.
Background : previously downloaded beta 8 and then it automatically updated to beta 12 using update features but for RC1, it does not.
I know users under Windows platform had same problem but was resolved and they can now update via check for update feature.
Please implement for Linux users too.
Thanks !!

If you can't update then you can download and install the full Firefox 4 RC version.
* http://www.mozilla.com/firefox/all-beta.html

Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update.

When my downloading until 80%, appear Installation error, "Window installer does not permit updatating of managed advertised product. At least one feature of the product must be installed before applying the update."

What product and version number are you talking about. Is it a trial version, or is it the full or subscription version. If the latter, activate the product with your S/N or Adobe ID and then do the updates.

Multiclip editing does not update Canvas window with active angle

Hi,
I am trying to do some multiclip editing but for some reason when cutting between angles the canvas viewer does not update with the video. Once I stop playback the cuts are all created properly and the video changes when playing back again. However, when editing the video does not change to the active angle. The audio changes but the video does not.
I have the multiclip playback setting in RT enabled and the canvas and viewer windows synced and matching each other when playing back, and video + audio is set in the sync menu.
I'm now stuck! and would greatly appreciate some help.
Thanks
Phil

Welcome to the family.
I don't mean to brush you off because I understand your frustration. But what we know about mutliclip is that it really does work, if you follow the rules completely. We also know that most of the "multiclip doesn't work" posts are resolved by encouraging the user to be objective and to simply recheck the setup steps in the manual, one at a time. (Editorially speaking: There are too many of them, there are too many stupid gotchas in the multiclip setup. True. Hope springs eternal that FCP6 may fix many of these things. It should be a one-click solution.)
You can search for multiclip here and, after filtering out the nonsense from elitists like me, you should be able to detect something in your configuration that might be keeping you from getting the performance you are expecting.
bogiesan

Main Viewer Window does not display correctly

Ever since I upgraded to Aperture 3.3 through 3.4.1, the main viewer window does not display correctly. Everything is justified to the right of the screen. When viewing images, the are not in teh center, they are over to the right. I can't even see the import controls when trying to import... actually I can't even press the import button or add metada. I am really in a bad position here. Need help with this... anyone out there have a solution please? my clients are waiting for their photos. Yikes!
Right justified?
No Import Controls?
Faces - Everything displayed in a single row, runs off the end of the right side of the screen

Have a read through this page and follow the directions to delete your application preferences,
Let us know how you go.
Tony
http://support.apple.com/kb/HT3805
Message was edited by: Tony Gay

"Arrange new window" (thumbnail window for digital painting) does not update

Hi,
I have an issue with Photoshop CC V2014.2.1 release where if I open a new document, then create a duplicate window of that document (Window->Arrange->New window for "Document.psd") if I am working on the original window, the duplicate window does not update any brush strokes until I select the duplicate window or perform an undo command.
On previous versions (CS4 & CS5) the 2nd window would update each brush stroke automatically.
I have looked for options to auto-update the 2nd window, but can't find anything. Is this a bug or am I missing an option?
Thanks,
Tim

Well there is feedback http://www.apple.com/feedback/itunesapp.html and if you have an AppleID there is a "bug reporter" http://bugreporter.apple.com/.

Windowed CLOCK does not update correctly

Similar Messages

Maybe you are looking for