Windowns dll file for Kerberos Authentication

Hi,
I am implementing Kerberos Authentication with Windows x64. The SAP Post installation guide metions that gx64krb5.dll file needs to copied under <Drive>:\%windir%\system32. It also metions that the file need to be downloaded from SAP Note 352295,.But "An SAP note with the number requested could not be found". Any other place from where I can download the file.
Regards
Deb

Okay, I found my PDF copy of [Note 352295|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=352295], and it contains the links to download the files from sapnet for both 64 and 32 bit.
Here is the link for the 64 bit:
https://service.sap.com/~sapidb/012003146900000310652008E/win64sso.zip
And just in case anyone reading this thread needs to get to the 32 bit:
https://service.sap.com/~sapidb/012003146900000310642008E/win32sso.zip

Similar Messages

How to create a dll file for lab view?

Hello
I want to create a DLL file for LabView. Can anyone help me in this issue?
Regards
Vivek

Please explain.
Do you want to create a dll in another language (which one?) for use in LabVIEW or do you want to create a dll out of your LabVIEW code?
LabVIEW Champion . Do more with less code and in less time .

Missing LIBRFC32.DLL file for 64bit - x64 Windows Server

Dear Folks,
I have installed SAP ECC6 with BI7 system on Windows Server 2003 on x64. But I am not able to get data from SAP BW from Crystal Report 2008. I also did MDX PARSER connection test through t.code SM59. I got list of error messages.
Logon     Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host ns2 / sapgw00
Error Details     DETAIL: no connect of TP mdxsvr from host ns2 after 20 sec
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 798
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 5873
Error Details     RETURN CODE: 242
Error Details     VERSION: 2
I have been read other forums, most probably I am missing LIBRFC32.DLL file for x64 Windows Server. I couldnu2019t find any where this specific file for Windows Server x64 64bit version. It is available on Sap Market place, since I donu2019t have super user rights, I canu2019t download it.
If any one of you already have this file. Please share with me.
thanks
Obaid

Hello Ingo
Thanks to read my problem and for your reply, I have already read that SAP Note 1032461, I have the same problem as clearly defined in the note, and suggesting to put LIBRFC32.DLL file in <windows-dir>/system32 folder.
My SAP ECC and BI7 (Kernl 7.00) is installed on 64-bit, x64 Windows Server 2003 Enterprise. I need to download that file from RFC library available on SAP Market place. But, I don't have any super user rights.
If someone has similar setup and has already that file or could download for me. I need to get that file. I appreciated your kindly help.
thanks
Obaid

Please . I want a working ( amtlib.dll ) file for adobe dreamweaver cc 2014 :(

Please . I want a working ( amtlib.dll ) file for adobe dreamweaver cc 2014

Nancy O. wrote:
This question was asked 7 months ago and nobody responded until now. A corrupt or missing DLL file can usually be fixed by reinstalling the software that's throwing an error.
Nancy O.
Only if you have legitimate software

Descriptions of java dll files for windows

I'm new to java programming and would greatly appreciate of someone could guide to documentation on java dll files for SDK windows..
thanks

If you are new, you don't want to know about the DLLs since there are not much you really need to know except you are writing JNI methods. Even you are writing JNI methods, you don't really need to care about the DLLs. Also I did not notice that there is any documentation about the DLLs/SOs. If you really want it, you may want to get this book: The JavaTM Native Interface by Sheng Liang
If you want toe documentations about JDK:
http://java.sun.com/j2se/1.3/docs/index.html
or
http://java.sun.com/j2se/1.4/docs/index.html

How to convert java class to dll file for using in Microsoft Technology(.n)

hey hemmj !!!!!!
nice replying , first of all i d like to say thanks for response me so frequently..... i like such type of guy... i d never forget ur online support.
hey buddy, i ve a problem with applet application...
i m working on java chat server build on swing applet. As it is chat server, it is divided into two parts, one is server application and other is client application. I want to run this server app on the client server and the basic thing with this site is that it is running on .net platform(Microsoft). and the other app ll running on the client machine or end user. Now the problem is that this site would run only if the server app ll be run on server. This server app ll open the socket of server, which ll listen the request of the user...... So, the requirement is to convert this java sever class file into dll file and register this dll file with the IIS server.So, It run and stop with the IIS server.
I ve already search the way to convert the java class file into dll file. This is possible in such way........... below code is for the java class file...
import java.net.*;
import java.io.*;
import java.util.*;
public class chatServer
public static void main(String args[]) throws Exception
ServerSocket sersoc=new ServerSocket(1234);// Any port number above 1000 should do
// as most ports below 1000 are used by system
Vector socvec=new Vector();
String data="";int i,j=0;
BufferedReader in;
//System.out.println("Listening of port " + sersoc.getLocalPort());
//System.out.println("Waiting for connections...");
while(true)
Socket soc=sersoc.accept();
socvec.addElement(soc);
chatServerReadThread csrt=new chatServerReadThread(socvec, soc);
in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
PrintStream out=new PrintStream(soc.getOutputStream());
out.println("Connected to chat server");
out.flush();
data= in.readLine();
for(i=0;i<socvec.size();i++)
soc=(Socket)socvec.elementAt(i);
out=new PrintStream(soc.getOutputStream());
out.println(data + " connected");
out.flush();
//System.out.println(data + " connected");
csrt.start(); // error is comming from here..... plz help me.
class chatServerReadThread extends Thread
Vector socvec;
PrintStream out;
chatServerReadThread(Vector socvec, Socket soc)
this.socvec=socvec;
try
out=new PrintStream(soc.getOutputStream());
}catch(Exception e){}
public void run()
try
String data;
Socket soc;
BufferedReader in;
while(true)
for(int i=0;i<socvec.size();i++)
soc=(Socket)socvec.elementAt(i);
in=new BufferedReader(new InputStreamReader(soc.getInputStream()));
if(in.ready())
try
data=in.readLine();
if(data.charAt(0) == ']')
data = in.readLine() + " exited";
//System.out.println(data);
socvec.removeElement(soc);
for(int e=0;e<socvec.size();e++)
soc=(Socket)socvec.elementAt(e);
out=new PrintStream(soc.getOutputStream());
out.println(data);
out.flush();
else
for(int e=0;e<socvec.size();e++)
soc=(Socket)socvec.elementAt(e);
out=new PrintStream(soc.getOutputStream());
out.println(data);
out.flush();
}catch(Exception e){socvec.removeElement(soc);}
}catch(Exception e){e.printStackTrace();}
first i ve made the jar file of this class
jar cvf chatServer.jar chatServer.classafter getting the jar chatServer.jar. I ve opened the .net dos prompt and
type this command which ll make dll file automatically....
> jbimp /t:library chatServer.jar
And you'll see the following output:
Microsoft (R) Java-language bytecode to MSIL converter version 1.1.4322.0
for Microsoft (R) .NET Framework version 1.1.4322
Copyright (C) Microsoft Corp 2000-2002. All rights reserved.
Created chatServer.dll
I cant get the problem origin from where it is comming, when i tried to convert it into .dll file it shown an error that, it did not recongnized the method in first class
public static void chatServerReadThread.start() method
is not recognized by .net dos prompt commnad. But when i omit this method it gets created the .dll file. This start method is basically the default method of thread class that run the thread from the same class..
By vewing the code u can visulize the thing,, i ve marked the code from where the error is comming.
Plz do it as soon as possible, i ll waiting for ur reply......
I ll be really thanking u for that....
Thanx and regards
Niraj Kumar Singh

I wonder if this will work:
jbimp /t:exe chatServer.jar
Your chatServer is an application that can be started from the commandline.
A dll is a library to be used in com, com+, other executables or ....

Where do we need to place DLL files for webutil_c_api

Hi..
(I posted this a few days back, but no reply..buddies, help me plz)
In Forms 10g while using webutil_c_api to call c functions,
where do we need to place the DLL files. Is it enough if we place in the AS or do we need to place the dll files in all the client machines.
Please clarify me.
Thnx and Regards
Sriram

Hi Sriram,
Yes, you can place the dlls in the same folder as d2kwut60.dll. Also, for your dll
to get donwloaded to the client, you need to configure the webutil.cfg file and add an entry for your own dll , after the webutil dll entries, as shown below:
install.syslib.0.7.1=jacob.dll|94208|1.0|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
install.syslib.0.user.1=scanner.dll|192512|1.0|true
Regards
Kavitha

Any document explaining Risks involved in assigning "Delegation Permission" to a computer for Kerberos Authentication

Need SSO on CRM 2013. As per documents assigning Delegation Permission in Kerberos Authentication is mandatory to achieve SSO in CRM 2013.
Before doing that need to evaluate risks in doing so. Any help or document for the same is helpful.
Devesh

Hi Devesh,
“The idea of delegation in Kerberos is that if a user makes a request to a final resource, and some
intermediary accounts must process the request, then those intermediary accounts can be trusted to delegate on the user’s behalf. You can configure an account for delegation by using Active Directory Users and Computers as a domain administrator.
Select Trust this user/computer for delegation to any service (Kerberos) under the Delegation tab of the user or computer account.”
Quoted from this article below:
Using Kerberos for SharePoint Authentication
http://technet.microsoft.com/en-us/magazine/ee914605.aspx
From my point of view, as long as the intermediary account can be trusted, then it is safe.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Detect if database is enabled for Kerberos authentication

In our test and development environment, some of our databases are set up with authentication using Kerberos, while others are not.
We have a script that traverses all our databases, collecting different kind of information (db size, db version, etc.) which we present on an internal web page.
Is there a way to query the database itself if it is enabled for Kerberos or not? Is there a internal v$ or DBA-view that shows this information?
We are on Oracle 11.2.0.3:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
Thanks in advance for your help.

Hi,
you need to develop logic around these below statements:
From SQL you need to check:
select STATUS from V$INSTANCE;
FOR DOS:
tnsping $ORACLE_SID
From Unix :
ps -ef|grep pmon

Where do dll files for plugins go under Vista-64 for CS3?

I copied two dll files that CS3 complains are missing into several places within the C drive for Vista-64, and none seem to work. The missing ones are MSVCRT10 and IJL15. I called Adobe but they want $39 to talk to anyone about any CS3 issues!! [Just because CS4 is out now.] Here are some places that I tried:
\windows\system32
the plug-ins directory
Where should they be??? Thanks for any hints.

The advice in the item pointed to by this URL tells one to put them in the \System32 folder. I had already tried that before I posted the query yesterday. After a lot of experimenting and finally reading the files on the CS3 disk, I found that they have to be located in the Photoshop directory itself. When placed there, everything is happy!!
Thanks for the leads - I'm now greatly relieved.
Dick

Does anyone have a working amtlib.dll files for Primere Pro CC and After Effects CC?

I have had problems when installing it, it s saying it is missing the amtlib.dll file (on both) I do have PS CC working, but apparently PPCC and AECC require different amtlib.dll files
Please don't post any spam links :/
Thanks!

download the installation files and properly install your apps.
you might want to uninstall and clean before doing that (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6).
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Access a dll file for an oracle adf app deployed on weblogic on linux box

Hi:
My department is trying to move an oracle adf application from oracle application server to weblogic 10.3 application server. After trying for a few weeks, everything looks fine except that the application is not able to access a dll file. For this adf application we use a dll file which is a C program to allow us to grab ip address and mac address for every user's computer for security reason. On our oracle application server on a linux box, everything is fine and the application is able to use access the dll fine. Technically, it is how the dll work. In our login.jspx, we declare a object:
<OBJECT id="objMacAddr" height="0" width="0" classid="CLSID:D69161F0-C2BB-4212-9B67-62B908A07726" codebase="RMacAddress.dll#Version=1,0,0,1">
when the user access our web application, the browser grab the dll file from the server while loading the page and a java script function in the page uses the dll file to grab the ip address and mac address for user's computer.
It works on oracle application server. However, it does not work on Weblogic 10.3 server. Does anyone have similar experience? We have been told by oracle support that Weblogic 10.3 server does not recognize the dll file at all. One thing I don't understand is that both our oracle application and weblogic 10.3 are on linux box. Why dll works on oralce application server but not on weblogic 10.3 server? This issue has bothered us for quite a few weeks already. I just hope that anyone on this forum gives us some kind of hint or direction.
Thanks,
Jack

Also,
I checked the "monitoring" window of my datasource on weblogic server and saw that there are no failed database connections. So, the problem of a broken database connectivity can be ruled out.
--Vivek

Why Do I Need to Upload dll Files for Lightroom 5

I had a problem with the beta version of Lightroom 5 and was told to upload to dll files (msvcr80 and msvcr100), It worked fine after that. However, today I downloaded Lightroom 5, after deleting the beta version, and it did not work. I went back and added the two dll files and it works fine. Does anyone have an idea why the program does not come with these file or why I am having to do this. It must be a common but not universal problem. Just curious.
Doug

My understanding (which could well be wrong!) is that those two DLLs are in fact a standard part of the Operating Sytem, i.e. they appear in the Windows libraries. Lightroom (along with potentially other applications) makes use of these and so requires them to be working correctly. It looks first in its own installed libraries for them, and if not there it looks in the WIndows libraries. All well and good normally, however there was a recent spate of those "0Xc00007b" failures which were caused by some other application (iLivid seemed to be the main culprit) corrupting those two DLLs. The "Fix" from Adobe was simply to provide fresh copies of the two corrupt DLLs, which you then inserted into Lightroom 4's specific installation library. So now that you have Lightroom 5 installed, it too needs those DLLs dropped into its own specific installation library.
Note that you'll possibly need to keep doing it every time you install a dot release update.....or go and fix those DLLs in the Windows libraries. Obviously Adobe doesn't see it as their job to fix Operating System problems, so they've just provided a workaround for now.

How to setup a KDC for Kerberos Authentication

Hi,
I am new to Kerberos. I am trying to execute the sample codes on Sun site but i am not understanding how to setup a KDC.
Please help me.
Regards.

Hi Alexander,
create the proxyauth.txt file in the roor directory of you MI Client installation and add the following paramters to the text file:
MobileEngine.Sync.Proxyuser= Username for Proxyserver
MobileEngine.Sync.Proxypw=Password for Proxyserver
Regards
Tahran

Setting realm and kdc for kerberos authentication

Hi there,
I was wondering if it's possible to set the default realm and kdc from within the code or do they have to be specified when starting the program? I know that they can be specified in a configuration file, but then the config file must be specified every time the program is run. If I can't set the realm and kdc, can I at least set the config file in my code?
Thanks in advance

For example, to start up my code that uses JAAS to authenticate against kerberos, I have to type:
java -Djava.security.auth.login.config=sampleConfig.conf MyClass
I need to have a servlet do the authentication, so how can I tell my servlet to use the specified configuration file, since it won't be launched from the command line.

Windowns dll file for Kerberos Authentication

Similar Messages

Maybe you are looking for