Windows 10 and MarvellYukon Network Adapter not responding properly
With W10 preview the "Marvell Yukon Network-Adapter" does not work properly.
It destroys the ethernet-integrity (some nodes are not shown on other computers anymore when W10 is up) und the network speed is about a few kilobits!
RDP connection to W10 machine will lost unexpectedly! It seems to be a massive driver problem.
Regards
I found the reason: after installing the new build "Jumbo Frames" were activated to 9000 .
Really mysterious, I never touched these settings ...
Similar Messages
-
When using icloud because I lost my ipad...when i attempt to use the "LOST" feature the "next" and "cancel" buttons do not respond. I have attempted this on 3 different windows based computers on 3 different networks. Any ideas?
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom -
I'm not a "Cloud" member. I just upgraded to Lightroom 6 from Lightroom 5. All was working well yesterday. Today Lightroom will not open (Windows 7). I see the logo photo over my Lightroom platform but nothing loads and I see "Lightroom not responding." I checked the catalogs and see that lrcat-Journal and lrcat-Lock have been created every time I try to open. I have a backup from the first day I upgraded, but Lightroom doesn't want to access it. Should I reinstall?
Well, is the catalogue (and the folder it is in) writable? Have you actually checked the permissions? Lightroom won't be spitting out the error just to tick you off, and - computer wizard or not - this sounds very much like something you'll have to fix at the OS level: it's probably nothing to do with Lightroom or those funny lads at Adobe.
Some light reading for you, courtesy of the site search: https://forums.adobe.com/search.jspa?q=%22+not+writable+and+cannot+be+opened%22&place=%2Fp laces%2F1383621&depth=ALL
It would help to know your OS. -
After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.
After installing Windows 8, when I try to use itunes, the cursor only slowly scrolls to the top of the page and the program will not respond.
-
Photosmart C6180 on wireless network does not respond when attempting to print
Photosmart C6180 successfully installed on wireless network does not respond when attempting to print. All in one is successfully installed on wireless network and SW successfully installed on Windows XP computer yet printer does not print. Get no error message other than document failed to print. HELP!
So gald I'm not the only one. I have been fighting this crappy HP printer for MONTHS also. Everything says a OK goody goody but printer fails to print every two to three weeks.
-
I was moving 90 files from one folder to another and instead accidently double clicked all the files I had selected and they all opened at once and now they are all stuck trying to load and the program is not responding.
When I put my mouse over the folders, it's just the loading cursor so i can't select anything. I've tried using 'command' - 'option' - 'W' and that doesn't work either.
I have tried restarting finder and all that does is shut all of the folders and reopens them and they get stuck trying to load all over again.
I have tried restarting my macbook and every time I log back in, it restarts all the programs and all the finder windows and the whole process repeats.
(even when I unselect the 'restart opened programs' box.)
I really hope someone knows how to troubleshoot this problem I am having!You're trying to use Spry Accordions for something they were never intended to do. Why don't you switch to a more appropriate jQuery Mega Menu?
http://www.designchemical.com/lab/jquery-mega-drop-down-menu-plugin/examples/
In case you missed the announcement, Spry is dead. Adobe abandoned it late last year because it has outlived its usefulness.
http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
Nancy O. -
My "caps lock" key and "P" key do not respond on my 2009 macbook pro unibody
I recently bought a used macbook pro for university. When I bought it the guy who had it before me was running windows 7 on the machine. (why ruin a mac with windows software? I have no idea) I love macs and everything about them so I decided to wipe the hard drive clean and run OSX like any other normal mac user... well now the "caps lock" and "P" keys do not respond at all!!! I've checked my keyboard settings and keyboard and character viewer and its only those keys that do not respond!! Any ideas how I could reset the hardware? (I have a feeling he had to configure the keys to windows software) And yes, I did see the keys work when I bought it!! Does anybody know apples policy on applecare? like what would I need to bring in to redeem it? (I know this computer is warrantied until 2013)
I got the exact same roblem- you can see that, "p" missing in the word problem.
And Caps lock doesn't work either.
A few hours ago, I had problem with Shift keys. They were stuck, I don't know which one but everything would be capatalized and minimizing windows would be very slow. Then the repairman at a Mac Support center (authorized reseller, no Apple stores here) took off the back cover and cleaned a small chord or something and the Shift problem vanished and this one appeared. The guy thinks it's related to keyboard- must be!- and I need to change it. Could there be any other option?
ps: I copied and pasted all the 'p's in this piece.
MacBook Pro, Mac OS X (10.6.8) -
When Firefox is opened, nothing shows up but a black screen and the program is not responding. How can I repair this?
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I installed mavericks today and the mail will not open and just keeps on not responding how do I get it back I have force quit it a number of times now
Open the system menu via Alt+Space or click the Firefox icon on the title bar and see if you can resize that window.
If that works then close Firefox to save that setting.
See also http://kb.mozillazine.org/Resizing_oversize_window
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See http://kb.mozillazine.org/Corrupt_localstore.rdf -
MacBook Pro is running slow and All applications getting not responding..
MacBook Pro is running slow and All applications getting not responding after every 30 seconds. I have tested by hardware test nothing wrong with hardware. I am worried Because I am totally stuck with my macbook pro Help me Please !!! I have tested by creating guest account and also new account as administrator. same thing happened. apps running. I opened activity monitor and watched carefully when any app stucked, In activity monitor there is in front of ap name following text appeared : (Not Responding) in red color. 129GB free memory, 4 GB RAM Core i3 MacBook Pro 13 inch.
Instant help needed..
Thanks in ADVANCE !!!First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
I have an Itunes account already set up, when setting up my hubby's new phone to itunes, I have somehow merged the 2 itunes accounts together and now itunes is not responding to my phone and all of my info has synced onto my hubby's phone wiping all of his info and adding mine...Help!!
If her data was not backed up or synced to something, it's gone. Sorry.
-
my suddenly no longer works and dosn't show any sign and when i try to make restore for it, iTunes shows me error 4005 and my iPhone does not respond to iTunes
OK, and when you searched for information on iPhone error 4005 what did you find?
-
HT1338 XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding
XSERVE 10.6.8 is running very slow, and Workgroup Manager is not responding. There is no more updates to download.
munish khanna wrote:
1. upgrade to lion, which should over write previous software and the reasons for it being slow.
No, you don't want to upgrade over a buggy system, Lion has issues of it's own that will only complicate matters, plus Lion is slower than Snow Leopard.
Learn all the pitfalls before you upgrade to Lion, like all your Rosetta/older programs will no longer work and more.
Leave Lion for a new hardware purchase is my advice, it's still got plenty of security and other issues.
For your performance, your likely better off replacing the hard drive with a 7,200 RPM model and maxing the RAM, download the free MacTracker to find out your specs, and OtherWorld Computing is good for videos, tools and parts.
http://eshop.macsales.com/installvideos/
2. Format the hard disc and reinstall snow leopard.
That will work, provided your data is off the machine first.
Now how do i reinstall snow leopard as it was an online purchased upgrade from leopard.
The 10.6 Snow Leopard disk that you upgraded 10.5 Leopard from actually has the full OS X 10.6 on it.
All you have to do is stick the disk in and hold the c key down while booting, use Disk Utility to erase the entire drive, quit and install 10.6.
Of course your not going to get the free iLife that came with the 10.5 grey disks, see if you can first install 10.5 with the same methods, then setup with the same user name as before, then upgrade to 10.6
I think Apple nulled booting off the 10.5 disks, but it won't hurt to try.
Another method would be to install 10.6 fresh by itself, then use the program called Pacifist to extract iLife from the 10.5 disks.
http://www.charlessoft.com/
Read here for plenty of how to's
https://discussions.apple.com/message/16276201#16276201
Maybe you are looking for
-
SBWP: The content of message is not display
Hi, The user use SBWP inbox. There the message is not display the content of the message. There I uninstalled and install again the SAP GUI and Windows, but there has been the same. Only the head of message is displayed. There can only print the cont
-
Graphic Driver has stopped responding but recovered ERROR
I have had this issue since I put windows 7 on my s12. Graphic card driver stops working, usually when coming from sleep or the screen saver. Usually the screen goes black for a few seconds, Now its worse and never restores, the maching must be for
-
Portal Favorites iView is not appearing !!!!!!
Hi the Portal favorite iview is not appearing. We have transported all KM content from dev to test server. The Portal favourite iView itself is not coming.i have checked in Contemt Administration> KM content> root> entry point> favorites. the favouri
-
Import Outlook 2010 contact into Mac OS X Address Book
*Help needed!* In our company, we run PCs with Windows XP and MS Office 2010. For private usage I have a MacBook with Snow Leopard. Since quite I while, I am trying to export the contacts from my Outlook 2010 address book into the preferred Address B
-
Procedure requirement for Concurrent access
Hello all i need to write a procedure with the following requirement I got a table Employee , this table may contain 9 million records, and few users of the same company will be accessing this Table (Employee ). Ie select * from Employee where compan