Windows 10 Audio Glitching

So my wife's HP laptop has upgraded to Windows 10 and everything seems to be great except for audio playback. Reference: By audio glitching, I mean that the sound stutters and slurs with digital-sounding artifacts. The sound doesn't stop outright, but sounds similar to when a CD plays over a scratched section.Laptop: HP Pavilion dv7-6c21nrOS: Microsoft Windows 10 Home (64-bit) She noticed the glitching immediately as she listens to quite a bit of music. We thought it was Spotify at first, but subsequent testing with YouTube and then testing the sound in the control panel gave us the same glitching. It seems to happen at the same positions in songs, regardless of where you source the audio, though the severeity of the glitching varies. CPU Load: We checked CPU load by opening up the Task Manager and sorting processes by CPU while playing music. CPU load was normal. Drivers: We tried using the generic High Definition Audio drivers as well as the IDT drivers that installed with Windows 10, the ones for Windows 8.1 and the ones for Windows 7. I even tried installing the Microsoft HD Audio Tool, as suggested in other posts. Settings: We found that playing with the playback quality seemed to help a little, especially if we cranked it up. It didn't get rid of the issue entirely though. Changing the device exclusivity and priority had no change. Other Solutions: We did a restore of Windows 10 hoping that it was just some left-over issues, but that made no difference. With the IDT drivers, we tried enabling and disbaling various options in the Beats control panel without any change in the glitching. Any help would be appreciated. My wife is ready to see how far the laptop will fly...

After doing even more searching, I came across the LatencyMon tool and ran that. What I found was that, like other people, ndis.sys was not behaving well. We disabled both RealTek network devices and found that the audio problems went away, though this is not the solution we desired. Luckily I had a LevelOne WiFi adapter, which plugged in and ran just fine. No issues, no latency, no sound glitches. Conclusion: Your RealTek network device drivers need to be fixed and updated. I haven't tried using previous versions yet, as the adapter I have works.

Similar Messages

Audio glitch with Windows 7

Hello,
I succesfully upgraded Vista to Windows 7 and I am very happy with it..........................except. Audio glitches!
With Vista I had no audio glitches but now with Windows 7 I have. With help from dpc latency checker I disabled every driver I could disable but no result.
Can anyone help me out please?!!!!

Hi
Which notebook model do you have exactly?
Have you installed latest Win7 sound driver for your notebook model?

X-Fi Xtreme Audio [Windows 7] Random Audio Glitches

Hi I have Windows 7 and a PCI X-Fi Xtreme Audio sound card. (Not PCI-E). My problem is I get random audio glitches when listening to music or playing a game. No card I have had before had this problem. My computer is fast enough and I have the latest Windows 7 X-Fi Xtreme Audio driver installed. So what might be causing this?

#Did this happen right after you install the sound card new or did this happen out of the blue?
Sorry I don't have any further suggestion at this point, you might want to contact Customer Support to see how they can help you further.

Serious audio glitch problem in 9.1.1 - please help!

Got a problem with audio glitching that is driving me insane - hopefully someone can help (please! :_))
I'm on Logic 9.1.1 on a recent MacPro using 10.5.8, 12Gb memory. I've created an arrangement in Logic with two multi timbral / multi-output instruments (Kontakt and Stylus RMX - both up to date versions) with aux outputs for all of the instruments channels; 16 in the case of Kontakt, 8 in the case of RMX.
I'll work with this setup and after a while I find that whenever I play and then press stop, a tiny portion of audio will repeat rapidly, over and over again in the 'master' left output channel at +6.0dB - it also shows up on all the instrument auxes at a much lower level. It's as if Aphex Twin has invaded my Mac... Weirdly, this problem crops up even if I'm not outputting anything from the multi-instruments - it's enough that say, an EXS instrument, plays something, I'll press stop, and then the glitch signal will appear in all the level meters of the multi instruments and master output, but not on the EXS level meter. If I press play again, the glitch disappears and audio playback is perfect - it only happens when stop is pressed. And no sign of it if there's a silent part in the arrangement with no tracks playing anything.
If I have any instances of reverb on bus channels, that audio will will also feed into the left channel of those busses, even when there are no channel strips sending to them. Weird as ****, and driving me up the wall with frustration.
I've omitted it being down to my audio interface (Metric Halo 2882) as the problem persists if I switch to the Mac internal I/O.
I'm trying to work through this at the mo as I've got a deadline for 2pm this afternoon - but I'm worried I might not make it due to throwing my feckin computer out the window. Please help - thanks!

Alasdair Reid wrote:
It's as if Aphex Twin has invaded my Mac...
If your deadline wasn't looming, I'd say buss everything to a stereo track and record this stuff. It sounds great, you could use it in another project later...
But to your problem: The only quick solution I can think of for you to try is to create a brand new fresh project and use the selective track import feature to bring your tracks into the new project. Don't start from an old template (that you may still be using since Logic 8 or something) because this could indeed be the root of the problem. Build a new template from Logic 9.1.1, then make a new project from that and import all your tracks. If it's your project that's corrupted somehow, this could be the trick to solve it, and it won't take too long to try, so it's worth a shot.
I'm not sure of this, but something is telling me I've seen this problem before, and if so it was on Leopard (not Snow Leopard) on a MacPro in the studio. Have never had it on my personal MBP (which was only ever Tiger and then Snow Leopard - I skipped Leopard on purpose because the studio machines seemed so very dicey). Also, I don't use RMX on my own machine but in the studio, yes. Same deal for multiple output instruments, I rarely do that either. On that point, another thing you could try is to forget about multiple outs for now, and just work with stereo instances. Yes I realize this will mess up your entire painstakingly built-up mix.. but if this is causing the flakiness you may have no choice but to go back to stereo instances, finish your writing, then do the whole mute/solo thing to bounce your individual parts to audio and proceed from there. In this scenario, selective track import will be a timesaver too because once you've done all the bouncing, you can just create a new project and import all of your channel strips and so on, to then re-assign the individually bounced tracks to the assignments you had before. Will be quicker to recreate your mix than having to do it from scratch. Or you might not even need to do this step because if eliminating the multi-out instruments makes the prob go away, then you can just recreate your assignments within the same project using the bounced audio tracks.
Get to it.
Once you've delivered.. I'd open that project again and record all of that lovely Aphex Twin messiness for later use.

Audio glitches every 11 min. 42 sec. in iDVD 6

i burned a slideshow in iDVD and added music but every 11 minutes 42 sec. it goes to a new "title" and the audio glitches right there. What am I doing to create this "title"......I'm very new at this and am sure its something I must have to turn off....?????

Check to see if the problem is happening at the 99th slide. iDVD slideshows can hang up there. If so, reduce to 98.
I make my slideshows in iPhoto instead of iDVD, then File/Export to my desktop and drag the resulting Quicktime movie into the edge of the iDVD project's main window. You won't have the glitch at No. 99, if that's the problem.

Audio glitches at the start of video

Hello,
i have a few audio glitches at the start of the video.
This happens only at the start of the video, at the first 30-40 sec, where there is a music soundtrack.
I am using encore 2.0 and a portable HP Pavilion dv4000.
The video was coming from a dv tape that was captured with windows movie maker as avi and imported as avi to encore.
But the sound was changed to 48 khz, at the edit (Avid).
Please i need your help.

Neil,
Thanks for the response. I started looking for Audioblack in the New Asset list, the Transitions and Effects, all through Audition, manuals, Internet, everything, and about all that I found was reference to an indie band - "Audioblack," or comments attributed to you. I have a lot of material from Dolby, from when I first began using 5.1 Surround in DVDs, but did not see this term there. It was probably in some of their more technical papers, and not the "primer" course ones, that I already had. You very clearly pointed out *what* the problem was likely to be, but I wanted clarification as to the exact solution. You cleared that up beautifully.
Based on one of your earlier replies along these lines, I instituted a 2 sec. gap in my Audio Tracks at the beginning of all Timelines, as part of my workflow - 2 sec. Black Video, Dip to Black to 1st Title, and silence on my Audio Track, but was becoming worried, that I needed to create an actual Audio Clip with certain properties. I see that my interpretation of Audioblack works.
I had not encountered the problems, that some others had, but then my test DVD players are all higher-end Marantz units, and who knows what a client is likely to try and play the DVDs on? I wanted to establish a workflow, that would give me the greatest chance of success, regardless of the hardware. Thanks to you, and to others, I am honing my workflow, as well as I can.
I think, based on some other responses, that involve hardware, that I will dig up a very old, and cheap Panasonic DVD from my gym, to use as a test machine - doesn't get much older, or cheaper, than that.
Greatly appreciated,
Hunt
PS I still use an older Cambridge as the rear-channel amp out of my Carver C-400 pre. Great unit and still going strong!

Unexpected Audio Glitches

I'm using a firewire interface (Mackie onyx satellite) into an ~2 year old 13" MacBook Pro and I've recently been getting some audio glitches when recording in Garageband.
I've recently started using a line out from an attenuator for my guitar recording and a DI out from my bass amp for my bass recording. With the exception of the cab sim on the guitar recordings, I'm not running any plugins.
I was previously recording direct, using either the built-in Garageband amp sims or Amplitube 3 (which is supposedly quite CPU intensive) to record both bass and guitar.
Using the plugin method I had no glitches, but somehow when I record direct I get glitches (particularly on the bass recordings). Admittedly, I don't know a great deal about computers, however my experience seems counter-intuitive to me. I thought using plugins placed a greater load on the CPU versus going direct but for some reason I'm getting more problems going direct.
I'm only recording two instrument tracks and adding a drum loop too so I don't know why this is. Can anyone suggest why I could be experiencing these glitches?

funkywrench wrote:
The drivers are current as far as I know.
So you have checked the manufacturers website/forum etc?
The glitches are pops and crackles which I was led to believe are caused by the CPU not keeping up, though its quite possible I'm wrong!
Something you can do is check this via the activity monitor Applications>Utilities>Activity Monitor. You can check CPU use % and System memory %. I had to do this the other day because of freezing while playback. In the list Called Process Name you will see GB. You can have this window open while GB is active. Just check what numbers you are getting with GB.

Audio Glitches on Timeline, but not when played in QT?

I had a client send me his project on a harddrive.
They exported a .mov file from FCP and it has no audio glitches when played with Quicktime.
But if i drag that file to a timeline and watch it through my DSR-25 to a NTSC monitor, it has audio glitches in certain spots.
Always at that spot though and if i watch the file in Quicktime, it plays fine.
All audio was exported originally out of FCP using Quicktime Movie with 48khz, 16 bit stereo so nothing needed to be rendered.
Seems like it has something to do with it going over via firewire through my DSR-25.
Has anyone else had this problem.
I can't make a Master DVCam tape for this master because of these audio glitches.
Thanks for any help,
Brian

I read a post about a user having this same sort of issue.
He said when he turns off his video layer, in my case just V1, the audio played fine.
Same with mine.
So it seems to be an issue with the video track playing with the audio track.
If i export it and bring it back in, will it just create that same audio glitch?
Guess i will have to try.
Anyone have this issue or similiar?
Thanks,
Brian

Audio Glitch in Adobe Premiere Pro CS5 Timeline (not a clip problem - it's the timeline space)

I have an audio glitch that appears to be tied to a space in my timeline and not to a certain audio clip. If I drag or move the audio clip further up or down the timeline it plays fine. If I move a different audio file into this area, the audio drops out in the same area, even with volumes set where they need to be. There are absolutely no keyframes set in this area and I want to be clear about that. However, this issue did come up only the software froze on me as I was loading my project. I believe my best bet is to delete delete my media cach and media cache files so that clips are reconformed... unless someone has additional input or has experienced similar issue with the sound.
As a note, I also reinstalled Quicktime. I am working with AVI files/aac auio codec.

No. You will not find any Master Track Keyframes. These will be on the Audio Track, and will be attached to the Track, regardless of what Clip you have there. Here is a look at Track Keyframes, not to be confused with Clip Keyframes from PrPro 2.0:
Hope that this helps and good luck,
Hunt

Audio Glitch in Apple DVD player when at the end of a story

Hi Could anyone shine a light on why when I build and open up my dvd project in Apple dvd player there is an audio glitch. But on the original mpeg there is no audio glitch there. I have chapter markered my project in fcp. I have ten storys and one chapter in each story.
when played on a dvd player the glitches are not heard
Any help on this matter would be great.
sam

in Apple dvd player there is an audio glitch. But on the original mpeg there is no audio glitch there.
when played on a dvd player the glitches are not heard
Have you played the DVD with more than one player without hearing glitches? What, exactly is the glitch? A click? In any case what you report suggests that there is a problem with Apple's DVD Player.
Do you hear the glitch when you play the DVD (the physical disk) with Apple's DVD Player?
I seem to be having a similar problem, but I haven't burned a disk and used a DVD player to play it. See this thread: http://discussions.apple.com/thread.jspa?threadID=1863240&tstart=0
DVDSP shows my soundtrack file to be longer than what it actually is. Is that the case in your situation?

Windows Audio always switches to 5.1 settings

Hi,
before I start, I already searched this forum regarding my problem, with no results.
Basic information: I'm using headphones (Sennheiser HD 598), which are connected to the Headphone jack of my Sound Blaster Z. My settings in the Sound Blaster Software are Heaphones, everything else (SBX Pro Studio, Equalizer, etc) is switched off. Windows Audio Settings are set to Stereo.
My problem is that every time I restart my Computer the Windows Audio Settings switch to 5.1 and I have to manually switch it to Stereo again.
Edit: Well, I'm an idiot Found the solution with the SBZ Switcher

I think I may have solved my problem. I recently installed Full Spectrum Warrior. I installed it to a different dri've than all of my other games. Lo and behold, no audio problems. After some further investigation, I believe that the audio problem lies in an old hard disk dri've that is in the beginning stages of failure. After I actually thought about it, my load times from this hard disk have been taking forever, but Full Spectrum Warrior loads very quickly. The dri've is going to die! But I guess it's ok, the dri've is almost 0 years old, and this is the 3rd computer its been in.
Thanks for your help,
Josh

Windows Audio Services will not start

The sound on my HP Presario stopped working. Diagnostics said it was because the Windows Audio Services was not running. When I go to the Microsoft Management Console and try to start it again, I get Error 1068 - The dependency group failed to start. Any suggestions?
Presario SR 5000
Vista Home Premium

Hi Mziggi,
You may want to try installing the latest audio driver for your PC directly from the original device manufacturer. I'm not sure what your exact model number is (SR5000) is the series, but of the SR5000's that I've looked up they tend to have the Realtek High Definition Audio. If this is true for your PC (and I think it is), here is a link to the Realtek download site:
http://152.104.125.41/downloads/
Just select "High Definition Audio Codecs", select the agreement, and then download and install the driver for your operating system.
I hope this helps. Let us know how it goes.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Windows Audio service not running

I have just built my new computer, and I loaded up windows on it, and everything is working fine but the audio. I have the X over the audio and the "audio service is not running" error. I tried to start The Windows Audio service in the service
menu, but when I do that, I click the audio button and the red X reappears. I know I have all the dependant services enabled, because I have read through many forum posts. So, just to sum things up, all dependant services are on, I get the X error, and whenever
I start the Windows audio service it seems like its working but when I click the volume bar the X reappears over the icon.

Hello,
I recommend reposting your question in one of the Windows forums, depending on which OS version you are running. For example, either Windows 7 IT Pro or Windows 8.1 IT Pro forums.
- Christopher
Until the Whole World Hears

MPEG Streamclip Audio Glitch

Hi, I've been using MPEG Streamclip without any problems... until recently. Has anyone else experiened audio dropping out or glitching when exporting mov's from VOB's?
The audio keeps dropping out in the same place, even when I run MPEG streamclip on a different G5. Playing back the DVD, the audio is fine, it's only when you listen to the mov that you hear the glitches.
Is this a common error? If so, what can do the job of MPEG Streamclip, without the nonsense with the audio glitching?

Well, not if the DVD plays back fine with no glitches. It's only the mov from MPEG Streamclip that has audio issues. I also used Drop2DV on the same VOB and the audio came out fine, however the lack of control in exporting makes me want to figure out what is wrong with MPEG Streamclip.

Windows audio service is not enable

windows audio service not enable, when i try to enable it, error1068 the dependency service or group failed to start and 1059 cercular dependency service specified are displayed

Quote from irfan H
The error message indicates that the Audio service is failing to start on your computer.
You can try the below methods to fix this issue:
Method 1:
Run Audio troubleshooter that will automatically diagnose and fix any audio issues. You can refer this article to run Audio troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Playing-Audio-troubleshooter
Method 2:
Check the services manually.
I suggest that you check if the dependency services are started and check if you have the same issue.
a.     Click Start, type Services.msc in the Start Search box.
b.     Scroll down the list of services, right-click Windows Audio and select Start.
c.       Select Properties for Windows Audio and set its Startup Type to Automatic.
If the Windows Audio service does not start and you get the error ‘Error 1068: The dependency service or group failed to start, then make sure that the following services are started and their Startup Type is set to Automatic’
a.     Plug and Play
b.     Multimedia Class Scheduler
c.      Windows Audio Endpoint Builder
Method 3:
If the dependency services are not starting, you can uninstall and reinstall the Audio drivers. This will reset all the Audio components on your computer.
To uninstall a device with Device Manager:
a.     Click on start and type devmgmt.msc
b.     In Device Manager's left panel, open the node that represents. You should be able to find the Audio device under the Sound, Audio and Game controller. Uninstall and then right-click the device entry.
c.      On the shortcut menu, click Uninstall.
d.     On the Confirm Device Removal dialog box, click OK to start the uninstall process.
Once you uninstall the device, install the latest drivers by downloading it from the manufacturers’ website (Realtek).
Note:Make sure that you have the source to install the Audio drivers before you install it. Also create a System restore point before uninstalling the device.
Thanks,
Irfan H, Microsoft Answers Support Engineer. Visit our Microsoft Answers Feedback Forum and let us know what you think.

Windows 10 Audio Glitching

Similar Messages

Maybe you are looking for